| /* | |
| * linux/arch/i386/kernel/irq.c | |
| * | |
| * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar | |
| * | |
| * This file contains the lowest level x86-specific interrupt | |
| * entry, irq-stacks and irq statistics code. All the remaining | |
| * irq logic is done by the generic kernel/irq/ code and | |
| * by the x86-specific irq controller code. (e.g. i8259.c and | |
| * io_apic.c.) | |
| */ | |
| #include <asm/uaccess.h> | |
| #include <linux/module.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/notifier.h> | |
| #include <linux/cpu.h> | |
| #include <linux/delay.h> | |
| DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp; | |
| EXPORT_PER_CPU_SYMBOL(irq_stat); | |
| #ifndef CONFIG_X86_LOCAL_APIC | |
| /* | |
| * 'what should we do if we get a hw irq event on an illegal vector'. | |
| * each architecture has to answer this themselves. | |
| */ | |
| void ack_bad_irq(unsigned int irq) | |
| { | |
| printk("unexpected IRQ trap at vector %02x\n", irq); | |
| } | |
| #endif | |
| #ifdef CONFIG_4KSTACKS | |
| /* | |
| * per-CPU IRQ handling contexts (thread information and stack) | |
| */ | |
| union irq_ctx { | |
| struct thread_info tinfo; | |
| u32 stack[THREAD_SIZE/sizeof(u32)]; | |
| }; | |
| static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; | |
| static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; | |
| #endif | |
| /* | |
| * do_IRQ handles all normal device IRQ's (the special | |
| * SMP cross-CPU interrupts have their own specific | |
| * handlers). | |
| */ | |
| fastcall unsigned int do_IRQ(struct pt_regs *regs) | |
| { | |
| struct pt_regs *old_regs; | |
| /* high bit used in ret_from_ code */ | |
| int irq = ~regs->orig_eax; | |
| struct irq_desc *desc = irq_desc + irq; | |
| #ifdef CONFIG_4KSTACKS | |
| union irq_ctx *curctx, *irqctx; | |
| u32 *isp; | |
| #endif | |
| if (unlikely((unsigned)irq >= NR_IRQS)) { | |
| printk(KERN_EMERG "%s: cannot handle IRQ %d\n", | |
| __FUNCTION__, irq); | |
| BUG(); | |
| } | |
| old_regs = set_irq_regs(regs); | |
| irq_enter(); | |
| #ifdef CONFIG_DEBUG_STACKOVERFLOW | |
| /* Debugging check for stack overflow: is there less than 1KB free? */ | |
| { | |
| long esp; | |
| __asm__ __volatile__("andl %%esp,%0" : | |
| "=r" (esp) : "0" (THREAD_SIZE - 1)); | |
| if (unlikely(esp < (sizeof(struct thread_info) + STACK_WARN))) { | |
| printk("do_IRQ: stack overflow: %ld\n", | |
| esp - sizeof(struct thread_info)); | |
| dump_stack(); | |
| } | |
| } | |
| #endif | |
| #ifdef CONFIG_4KSTACKS | |
| curctx = (union irq_ctx *) current_thread_info(); | |
| irqctx = hardirq_ctx[smp_processor_id()]; | |
| /* | |
| * this is where we switch to the IRQ stack. However, if we are | |
| * already using the IRQ stack (because we interrupted a hardirq | |
| * handler) we can't do that and just have to keep using the | |
| * current stack (which is the irq stack already after all) | |
| */ | |
| if (curctx != irqctx) { | |
| int arg1, arg2, ebx; | |
| /* build the stack frame on the IRQ stack */ | |
| isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); | |
| irqctx->tinfo.task = curctx->tinfo.task; | |
| irqctx->tinfo.previous_esp = current_stack_pointer; | |
| /* | |
| * Copy the softirq bits in preempt_count so that the | |
| * softirq checks work in the hardirq context. | |
| */ | |
| irqctx->tinfo.preempt_count = | |
| (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | | |
| (curctx->tinfo.preempt_count & SOFTIRQ_MASK); | |
| asm volatile( | |
| " xchgl %%ebx,%%esp \n" | |
| " call *%%edi \n" | |
| " movl %%ebx,%%esp \n" | |
| : "=a" (arg1), "=d" (arg2), "=b" (ebx) | |
| : "0" (irq), "1" (desc), "2" (isp), | |
| "D" (desc->handle_irq) | |
| : "memory", "cc" | |
| ); | |
| } else | |
| #endif | |
| desc->handle_irq(irq, desc); | |
| irq_exit(); | |
| set_irq_regs(old_regs); | |
| return 1; | |
| } | |
| #ifdef CONFIG_4KSTACKS | |
| /* | |
| * These should really be __section__(".bss.page_aligned") as well, but | |
| * gcc's 3.0 and earlier don't handle that correctly. | |
| */ | |
| static char softirq_stack[NR_CPUS * THREAD_SIZE] | |
| __attribute__((__aligned__(THREAD_SIZE))); | |
| static char hardirq_stack[NR_CPUS * THREAD_SIZE] | |
| __attribute__((__aligned__(THREAD_SIZE))); | |
| /* | |
| * allocate per-cpu stacks for hardirq and for softirq processing | |
| */ | |
| void irq_ctx_init(int cpu) | |
| { | |
| union irq_ctx *irqctx; | |
| if (hardirq_ctx[cpu]) | |
| return; | |
| irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE]; | |
| irqctx->tinfo.task = NULL; | |
| irqctx->tinfo.exec_domain = NULL; | |
| irqctx->tinfo.cpu = cpu; | |
| irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; | |
| irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); | |
| hardirq_ctx[cpu] = irqctx; | |
| irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE]; | |
| irqctx->tinfo.task = NULL; | |
| irqctx->tinfo.exec_domain = NULL; | |
| irqctx->tinfo.cpu = cpu; | |
| irqctx->tinfo.preempt_count = 0; | |
| irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); | |
| softirq_ctx[cpu] = irqctx; | |
| printk("CPU %u irqstacks, hard=%p soft=%p\n", | |
| cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); | |
| } | |
| void irq_ctx_exit(int cpu) | |
| { | |
| hardirq_ctx[cpu] = NULL; | |
| } | |
| extern asmlinkage void __do_softirq(void); | |
| asmlinkage void do_softirq(void) | |
| { | |
| unsigned long flags; | |
| struct thread_info *curctx; | |
| union irq_ctx *irqctx; | |
| u32 *isp; | |
| if (in_interrupt()) | |
| return; | |
| local_irq_save(flags); | |
| if (local_softirq_pending()) { | |
| curctx = current_thread_info(); | |
| irqctx = softirq_ctx[smp_processor_id()]; | |
| irqctx->tinfo.task = curctx->task; | |
| irqctx->tinfo.previous_esp = current_stack_pointer; | |
| /* build the stack frame on the softirq stack */ | |
| isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); | |
| asm volatile( | |
| " xchgl %%ebx,%%esp \n" | |
| " call __do_softirq \n" | |
| " movl %%ebx,%%esp \n" | |
| : "=b"(isp) | |
| : "0"(isp) | |
| : "memory", "cc", "edx", "ecx", "eax" | |
| ); | |
| /* | |
| * Shouldnt happen, we returned above if in_interrupt(): | |
| */ | |
| WARN_ON_ONCE(softirq_count()); | |
| } | |
| local_irq_restore(flags); | |
| } | |
| EXPORT_SYMBOL(do_softirq); | |
| #endif | |
| /* | |
| * Interrupt statistics: | |
| */ | |
| atomic_t irq_err_count; | |
| /* | |
| * /proc/interrupts printing: | |
| */ | |
| int show_interrupts(struct seq_file *p, void *v) | |
| { | |
| int i = *(loff_t *) v, j; | |
| struct irqaction * action; | |
| unsigned long flags; | |
| if (i == 0) { | |
| seq_printf(p, " "); | |
| for_each_online_cpu(j) | |
| seq_printf(p, "CPU%-8d",j); | |
| seq_putc(p, '\n'); | |
| } | |
| if (i < NR_IRQS) { | |
| spin_lock_irqsave(&irq_desc[i].lock, flags); | |
| action = irq_desc[i].action; | |
| if (!action) | |
| goto skip; | |
| seq_printf(p, "%3d: ",i); | |
| #ifndef CONFIG_SMP | |
| seq_printf(p, "%10u ", kstat_irqs(i)); | |
| #else | |
| for_each_online_cpu(j) | |
| seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); | |
| #endif | |
| seq_printf(p, " %8s", irq_desc[i].chip->name); | |
| seq_printf(p, "-%-8s", irq_desc[i].name); | |
| seq_printf(p, " %s", action->name); | |
| for (action=action->next; action; action = action->next) | |
| seq_printf(p, ", %s", action->name); | |
| seq_putc(p, '\n'); | |
| skip: | |
| spin_unlock_irqrestore(&irq_desc[i].lock, flags); | |
| } else if (i == NR_IRQS) { | |
| seq_printf(p, "NMI: "); | |
| for_each_online_cpu(j) | |
| seq_printf(p, "%10u ", nmi_count(j)); | |
| seq_putc(p, '\n'); | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| seq_printf(p, "LOC: "); | |
| for_each_online_cpu(j) | |
| seq_printf(p, "%10u ", | |
| per_cpu(irq_stat,j).apic_timer_irqs); | |
| seq_putc(p, '\n'); | |
| #endif | |
| seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); | |
| #if defined(CONFIG_X86_IO_APIC) | |
| seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); | |
| #endif | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| #include <mach_apic.h> | |
| void fixup_irqs(cpumask_t map) | |
| { | |
| unsigned int irq; | |
| static int warned; | |
| for (irq = 0; irq < NR_IRQS; irq++) { | |
| cpumask_t mask; | |
| if (irq == 2) | |
| continue; | |
| cpus_and(mask, irq_desc[irq].affinity, map); | |
| if (any_online_cpu(mask) == NR_CPUS) { | |
| printk("Breaking affinity for irq %i\n", irq); | |
| mask = map; | |
| } | |
| if (irq_desc[irq].chip->set_affinity) | |
| irq_desc[irq].chip->set_affinity(irq, mask); | |
| else if (irq_desc[irq].action && !(warned++)) | |
| printk("Cannot set affinity for irq %i\n", irq); | |
| } | |
| #if 0 | |
| barrier(); | |
| /* Ingo Molnar says: "after the IO-APIC masks have been redirected | |
| [note the nop - the interrupt-enable boundary on x86 is two | |
| instructions from sti] - to flush out pending hardirqs and | |
| IPIs. After this point nothing is supposed to reach this CPU." */ | |
| __asm__ __volatile__("sti; nop; cli"); | |
| barrier(); | |
| #else | |
| /* That doesn't seem sufficient. Give it 1ms. */ | |
| local_irq_enable(); | |
| mdelay(1); | |
| local_irq_disable(); | |
| #endif | |
| } | |
| #endif | |