| /* | |
| * linux/arch/i386/kernel/process.c | |
| * | |
| * Copyright (C) 1995 Linus Torvalds | |
| * | |
| * Pentium III FXSR, SSE support | |
| * Gareth Hughes <gareth@valinux.com>, May 2000 | |
| */ | |
| /* | |
| * This file handles the architecture-dependent parts of process handling.. | |
| */ | |
| #include <stdarg.h> | |
| #include <linux/cpu.h> | |
| #include <linux/errno.h> | |
| #include <linux/sched.h> | |
| #include <linux/fs.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/elfcore.h> | |
| #include <linux/smp.h> | |
| #include <linux/smp_lock.h> | |
| #include <linux/stddef.h> | |
| #include <linux/slab.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/user.h> | |
| #include <linux/a.out.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/utsname.h> | |
| #include <linux/delay.h> | |
| #include <linux/reboot.h> | |
| #include <linux/init.h> | |
| #include <linux/mc146818rtc.h> | |
| #include <linux/module.h> | |
| #include <linux/kallsyms.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/random.h> | |
| #include <linux/personality.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/system.h> | |
| #include <asm/io.h> | |
| #include <asm/ldt.h> | |
| #include <asm/processor.h> | |
| #include <asm/i387.h> | |
| #include <asm/desc.h> | |
| #include <asm/vm86.h> | |
| #ifdef CONFIG_MATH_EMULATION | |
| #include <asm/math_emu.h> | |
| #endif | |
| #include <linux/err.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/cpu.h> | |
| asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); | |
| static int hlt_counter; | |
| unsigned long boot_option_idle_override = 0; | |
| EXPORT_SYMBOL(boot_option_idle_override); | |
| /* | |
| * Return saved PC of a blocked thread. | |
| */ | |
| unsigned long thread_saved_pc(struct task_struct *tsk) | |
| { | |
| return ((unsigned long *)tsk->thread.esp)[3]; | |
| } | |
| /* | |
| * Powermanagement idle function, if any.. | |
| */ | |
| void (*pm_idle)(void); | |
| EXPORT_SYMBOL(pm_idle); | |
| static DEFINE_PER_CPU(unsigned int, cpu_idle_state); | |
| void disable_hlt(void) | |
| { | |
| hlt_counter++; | |
| } | |
| EXPORT_SYMBOL(disable_hlt); | |
| void enable_hlt(void) | |
| { | |
| hlt_counter--; | |
| } | |
| EXPORT_SYMBOL(enable_hlt); | |
| /* | |
| * We use this if we don't have any better | |
| * idle routine.. | |
| */ | |
| void default_idle(void) | |
| { | |
| local_irq_enable(); | |
| if (!hlt_counter && boot_cpu_data.hlt_works_ok) { | |
| current_thread_info()->status &= ~TS_POLLING; | |
| smp_mb__after_clear_bit(); | |
| while (!need_resched()) { | |
| local_irq_disable(); | |
| if (!need_resched()) | |
| safe_halt(); | |
| else | |
| local_irq_enable(); | |
| } | |
| current_thread_info()->status |= TS_POLLING; | |
| } else { | |
| while (!need_resched()) | |
| cpu_relax(); | |
| } | |
| } | |
| #ifdef CONFIG_APM_MODULE | |
| EXPORT_SYMBOL(default_idle); | |
| #endif | |
| /* | |
| * On SMP it's slightly faster (but much more power-consuming!) | |
| * to poll the ->work.need_resched flag instead of waiting for the | |
| * cross-CPU IPI to arrive. Use this option with caution. | |
| */ | |
| static void poll_idle (void) | |
| { | |
| local_irq_enable(); | |
| asm volatile( | |
| "2:" | |
| "testl %0, %1;" | |
| "rep; nop;" | |
| "je 2b;" | |
| : : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags)); | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| #include <asm/nmi.h> | |
| /* We don't actually take CPU down, just spin without interrupts. */ | |
| static inline void play_dead(void) | |
| { | |
| /* This must be done before dead CPU ack */ | |
| cpu_exit_clear(); | |
| wbinvd(); | |
| mb(); | |
| /* Ack it */ | |
| __get_cpu_var(cpu_state) = CPU_DEAD; | |
| /* | |
| * With physical CPU hotplug, we should halt the cpu | |
| */ | |
| local_irq_disable(); | |
| while (1) | |
| halt(); | |
| } | |
| #else | |
| static inline void play_dead(void) | |
| { | |
| BUG(); | |
| } | |
| #endif /* CONFIG_HOTPLUG_CPU */ | |
| /* | |
| * The idle thread. There's no useful work to be | |
| * done, so just try to conserve power and have a | |
| * low exit latency (ie sit in a loop waiting for | |
| * somebody to say that they'd like to reschedule) | |
| */ | |
| void cpu_idle(void) | |
| { | |
| int cpu = smp_processor_id(); | |
| current_thread_info()->status |= TS_POLLING; | |
| /* endless idle loop with no priority at all */ | |
| while (1) { | |
| while (!need_resched()) { | |
| void (*idle)(void); | |
| if (__get_cpu_var(cpu_idle_state)) | |
| __get_cpu_var(cpu_idle_state) = 0; | |
| rmb(); | |
| idle = pm_idle; | |
| if (!idle) | |
| idle = default_idle; | |
| if (cpu_is_offline(cpu)) | |
| play_dead(); | |
| __get_cpu_var(irq_stat).idle_timestamp = jiffies; | |
| idle(); | |
| } | |
| preempt_enable_no_resched(); | |
| schedule(); | |
| preempt_disable(); | |
| } | |
| } | |
| void cpu_idle_wait(void) | |
| { | |
| unsigned int cpu, this_cpu = get_cpu(); | |
| cpumask_t map, tmp = current->cpus_allowed; | |
| set_cpus_allowed(current, cpumask_of_cpu(this_cpu)); | |
| put_cpu(); | |
| cpus_clear(map); | |
| for_each_online_cpu(cpu) { | |
| per_cpu(cpu_idle_state, cpu) = 1; | |
| cpu_set(cpu, map); | |
| } | |
| __get_cpu_var(cpu_idle_state) = 0; | |
| wmb(); | |
| do { | |
| ssleep(1); | |
| for_each_online_cpu(cpu) { | |
| if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu)) | |
| cpu_clear(cpu, map); | |
| } | |
| cpus_and(map, map, cpu_online_map); | |
| } while (!cpus_empty(map)); | |
| set_cpus_allowed(current, tmp); | |
| } | |
| EXPORT_SYMBOL_GPL(cpu_idle_wait); | |
| /* | |
| * This uses new MONITOR/MWAIT instructions on P4 processors with PNI, | |
| * which can obviate IPI to trigger checking of need_resched. | |
| * We execute MONITOR against need_resched and enter optimized wait state | |
| * through MWAIT. Whenever someone changes need_resched, we would be woken | |
| * up from MWAIT (without an IPI). | |
| * | |
| * New with Core Duo processors, MWAIT can take some hints based on CPU | |
| * capability. | |
| */ | |
| void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) | |
| { | |
| if (!need_resched()) { | |
| __monitor((void *)¤t_thread_info()->flags, 0, 0); | |
| smp_mb(); | |
| if (!need_resched()) | |
| __mwait(eax, ecx); | |
| } | |
| } | |
| /* Default MONITOR/MWAIT with no hints, used for default C1 state */ | |
| static void mwait_idle(void) | |
| { | |
| local_irq_enable(); | |
| while (!need_resched()) | |
| mwait_idle_with_hints(0, 0); | |
| } | |
| void __devinit select_idle_routine(const struct cpuinfo_x86 *c) | |
| { | |
| if (cpu_has(c, X86_FEATURE_MWAIT)) { | |
| printk("monitor/mwait feature present.\n"); | |
| /* | |
| * Skip, if setup has overridden idle. | |
| * One CPU supports mwait => All CPUs supports mwait | |
| */ | |
| if (!pm_idle) { | |
| printk("using mwait in idle threads.\n"); | |
| pm_idle = mwait_idle; | |
| } | |
| } | |
| } | |
| static int __init idle_setup (char *str) | |
| { | |
| if (!strncmp(str, "poll", 4)) { | |
| printk("using polling idle threads.\n"); | |
| pm_idle = poll_idle; | |
| #ifdef CONFIG_X86_SMP | |
| if (smp_num_siblings > 1) | |
| printk("WARNING: polling idle and HT enabled, performance may degrade.\n"); | |
| #endif | |
| } else if (!strncmp(str, "halt", 4)) { | |
| printk("using halt in idle threads.\n"); | |
| pm_idle = default_idle; | |
| } | |
| boot_option_idle_override = 1; | |
| return 1; | |
| } | |
| __setup("idle=", idle_setup); | |
| void show_regs(struct pt_regs * regs) | |
| { | |
| unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L; | |
| printk("\n"); | |
| printk("Pid: %d, comm: %20s\n", current->pid, current->comm); | |
| printk("EIP: %04x:[<%08lx>] CPU: %d\n",0xffff & regs->xcs,regs->eip, smp_processor_id()); | |
| print_symbol("EIP is at %s\n", regs->eip); | |
| if (user_mode_vm(regs)) | |
| printk(" ESP: %04x:%08lx",0xffff & regs->xss,regs->esp); | |
| printk(" EFLAGS: %08lx %s (%s %.*s)\n", | |
| regs->eflags, print_tainted(), init_utsname()->release, | |
| (int)strcspn(init_utsname()->version, " "), | |
| init_utsname()->version); | |
| printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", | |
| regs->eax,regs->ebx,regs->ecx,regs->edx); | |
| printk("ESI: %08lx EDI: %08lx EBP: %08lx", | |
| regs->esi, regs->edi, regs->ebp); | |
| printk(" DS: %04x ES: %04x\n", | |
| 0xffff & regs->xds,0xffff & regs->xes); | |
| cr0 = read_cr0(); | |
| cr2 = read_cr2(); | |
| cr3 = read_cr3(); | |
| cr4 = read_cr4_safe(); | |
| printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", cr0, cr2, cr3, cr4); | |
| show_trace(NULL, regs, ®s->esp); | |
| } | |
| /* | |
| * This gets run with %ebx containing the | |
| * function to call, and %edx containing | |
| * the "args". | |
| */ | |
| extern void kernel_thread_helper(void); | |
| /* | |
| * Create a kernel thread | |
| */ | |
| int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) | |
| { | |
| struct pt_regs regs; | |
| memset(®s, 0, sizeof(regs)); | |
| regs.ebx = (unsigned long) fn; | |
| regs.edx = (unsigned long) arg; | |
| regs.xds = __USER_DS; | |
| regs.xes = __USER_DS; | |
| regs.orig_eax = -1; | |
| regs.eip = (unsigned long) kernel_thread_helper; | |
| regs.xcs = __KERNEL_CS | get_kernel_rpl(); | |
| regs.eflags = X86_EFLAGS_IF | X86_EFLAGS_SF | X86_EFLAGS_PF | 0x2; | |
| /* Ok, create the new process.. */ | |
| return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); | |
| } | |
| EXPORT_SYMBOL(kernel_thread); | |
| /* | |
| * Free current thread data structures etc.. | |
| */ | |
| void exit_thread(void) | |
| { | |
| /* The process may have allocated an io port bitmap... nuke it. */ | |
| if (unlikely(test_thread_flag(TIF_IO_BITMAP))) { | |
| struct task_struct *tsk = current; | |
| struct thread_struct *t = &tsk->thread; | |
| int cpu = get_cpu(); | |
| struct tss_struct *tss = &per_cpu(init_tss, cpu); | |
| kfree(t->io_bitmap_ptr); | |
| t->io_bitmap_ptr = NULL; | |
| clear_thread_flag(TIF_IO_BITMAP); | |
| /* | |
| * Careful, clear this in the TSS too: | |
| */ | |
| memset(tss->io_bitmap, 0xff, tss->io_bitmap_max); | |
| t->io_bitmap_max = 0; | |
| tss->io_bitmap_owner = NULL; | |
| tss->io_bitmap_max = 0; | |
| tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET; | |
| put_cpu(); | |
| } | |
| } | |
| void flush_thread(void) | |
| { | |
| struct task_struct *tsk = current; | |
| memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8); | |
| memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); | |
| clear_tsk_thread_flag(tsk, TIF_DEBUG); | |
| /* | |
| * Forget coprocessor state.. | |
| */ | |
| clear_fpu(tsk); | |
| clear_used_math(); | |
| } | |
| void release_thread(struct task_struct *dead_task) | |
| { | |
| BUG_ON(dead_task->mm); | |
| release_vm86_irqs(dead_task); | |
| } | |
| /* | |
| * This gets called before we allocate a new thread and copy | |
| * the current task into it. | |
| */ | |
| void prepare_to_copy(struct task_struct *tsk) | |
| { | |
| unlazy_fpu(tsk); | |
| } | |
| int copy_thread(int nr, unsigned long clone_flags, unsigned long esp, | |
| unsigned long unused, | |
| struct task_struct * p, struct pt_regs * regs) | |
| { | |
| struct pt_regs * childregs; | |
| struct task_struct *tsk; | |
| int err; | |
| childregs = task_pt_regs(p); | |
| *childregs = *regs; | |
| childregs->eax = 0; | |
| childregs->esp = esp; | |
| p->thread.esp = (unsigned long) childregs; | |
| p->thread.esp0 = (unsigned long) (childregs+1); | |
| p->thread.eip = (unsigned long) ret_from_fork; | |
| savesegment(fs,p->thread.fs); | |
| savesegment(gs,p->thread.gs); | |
| tsk = current; | |
| if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) { | |
| p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr, | |
| IO_BITMAP_BYTES, GFP_KERNEL); | |
| if (!p->thread.io_bitmap_ptr) { | |
| p->thread.io_bitmap_max = 0; | |
| return -ENOMEM; | |
| } | |
| set_tsk_thread_flag(p, TIF_IO_BITMAP); | |
| } | |
| /* | |
| * Set a new TLS for the child thread? | |
| */ | |
| if (clone_flags & CLONE_SETTLS) { | |
| struct desc_struct *desc; | |
| struct user_desc info; | |
| int idx; | |
| err = -EFAULT; | |
| if (copy_from_user(&info, (void __user *)childregs->esi, sizeof(info))) | |
| goto out; | |
| err = -EINVAL; | |
| if (LDT_empty(&info)) | |
| goto out; | |
| idx = info.entry_number; | |
| if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) | |
| goto out; | |
| desc = p->thread.tls_array + idx - GDT_ENTRY_TLS_MIN; | |
| desc->a = LDT_entry_a(&info); | |
| desc->b = LDT_entry_b(&info); | |
| } | |
| err = 0; | |
| out: | |
| if (err && p->thread.io_bitmap_ptr) { | |
| kfree(p->thread.io_bitmap_ptr); | |
| p->thread.io_bitmap_max = 0; | |
| } | |
| return err; | |
| } | |
| /* | |
| * fill in the user structure for a core dump.. | |
| */ | |
| void dump_thread(struct pt_regs * regs, struct user * dump) | |
| { | |
| int i; | |
| /* changed the size calculations - should hopefully work better. lbt */ | |
| dump->magic = CMAGIC; | |
| dump->start_code = 0; | |
| dump->start_stack = regs->esp & ~(PAGE_SIZE - 1); | |
| dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT; | |
| dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT; | |
| dump->u_dsize -= dump->u_tsize; | |
| dump->u_ssize = 0; | |
| for (i = 0; i < 8; i++) | |
| dump->u_debugreg[i] = current->thread.debugreg[i]; | |
| if (dump->start_stack < TASK_SIZE) | |
| dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT; | |
| dump->regs.ebx = regs->ebx; | |
| dump->regs.ecx = regs->ecx; | |
| dump->regs.edx = regs->edx; | |
| dump->regs.esi = regs->esi; | |
| dump->regs.edi = regs->edi; | |
| dump->regs.ebp = regs->ebp; | |
| dump->regs.eax = regs->eax; | |
| dump->regs.ds = regs->xds; | |
| dump->regs.es = regs->xes; | |
| savesegment(fs,dump->regs.fs); | |
| savesegment(gs,dump->regs.gs); | |
| dump->regs.orig_eax = regs->orig_eax; | |
| dump->regs.eip = regs->eip; | |
| dump->regs.cs = regs->xcs; | |
| dump->regs.eflags = regs->eflags; | |
| dump->regs.esp = regs->esp; | |
| dump->regs.ss = regs->xss; | |
| dump->u_fpvalid = dump_fpu (regs, &dump->i387); | |
| } | |
| EXPORT_SYMBOL(dump_thread); | |
| /* | |
| * Capture the user space registers if the task is not running (in user space) | |
| */ | |
| int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) | |
| { | |
| struct pt_regs ptregs = *task_pt_regs(tsk); | |
| ptregs.xcs &= 0xffff; | |
| ptregs.xds &= 0xffff; | |
| ptregs.xes &= 0xffff; | |
| ptregs.xss &= 0xffff; | |
| elf_core_copy_regs(regs, &ptregs); | |
| return 1; | |
| } | |
| static noinline void __switch_to_xtra(struct task_struct *next_p, | |
| struct tss_struct *tss) | |
| { | |
| struct thread_struct *next; | |
| next = &next_p->thread; | |
| if (test_tsk_thread_flag(next_p, TIF_DEBUG)) { | |
| set_debugreg(next->debugreg[0], 0); | |
| set_debugreg(next->debugreg[1], 1); | |
| set_debugreg(next->debugreg[2], 2); | |
| set_debugreg(next->debugreg[3], 3); | |
| /* no 4 and 5 */ | |
| set_debugreg(next->debugreg[6], 6); | |
| set_debugreg(next->debugreg[7], 7); | |
| } | |
| if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { | |
| /* | |
| * Disable the bitmap via an invalid offset. We still cache | |
| * the previous bitmap owner and the IO bitmap contents: | |
| */ | |
| tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET; | |
| return; | |
| } | |
| if (likely(next == tss->io_bitmap_owner)) { | |
| /* | |
| * Previous owner of the bitmap (hence the bitmap content) | |
| * matches the next task, we dont have to do anything but | |
| * to set a valid offset in the TSS: | |
| */ | |
| tss->io_bitmap_base = IO_BITMAP_OFFSET; | |
| return; | |
| } | |
| /* | |
| * Lazy TSS's I/O bitmap copy. We set an invalid offset here | |
| * and we let the task to get a GPF in case an I/O instruction | |
| * is performed. The handler of the GPF will verify that the | |
| * faulting task has a valid I/O bitmap and, it true, does the | |
| * real copy and restart the instruction. This will save us | |
| * redundant copies when the currently switched task does not | |
| * perform any I/O during its timeslice. | |
| */ | |
| tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY; | |
| } | |
| /* | |
| * This function selects if the context switch from prev to next | |
| * has to tweak the TSC disable bit in the cr4. | |
| */ | |
| static inline void disable_tsc(struct task_struct *prev_p, | |
| struct task_struct *next_p) | |
| { | |
| struct thread_info *prev, *next; | |
| /* | |
| * gcc should eliminate the ->thread_info dereference if | |
| * has_secure_computing returns 0 at compile time (SECCOMP=n). | |
| */ | |
| prev = task_thread_info(prev_p); | |
| next = task_thread_info(next_p); | |
| if (has_secure_computing(prev) || has_secure_computing(next)) { | |
| /* slow path here */ | |
| if (has_secure_computing(prev) && | |
| !has_secure_computing(next)) { | |
| write_cr4(read_cr4() & ~X86_CR4_TSD); | |
| } else if (!has_secure_computing(prev) && | |
| has_secure_computing(next)) | |
| write_cr4(read_cr4() | X86_CR4_TSD); | |
| } | |
| } | |
| /* | |
| * switch_to(x,yn) should switch tasks from x to y. | |
| * | |
| * We fsave/fwait so that an exception goes off at the right time | |
| * (as a call from the fsave or fwait in effect) rather than to | |
| * the wrong process. Lazy FP saving no longer makes any sense | |
| * with modern CPU's, and this simplifies a lot of things (SMP | |
| * and UP become the same). | |
| * | |
| * NOTE! We used to use the x86 hardware context switching. The | |
| * reason for not using it any more becomes apparent when you | |
| * try to recover gracefully from saved state that is no longer | |
| * valid (stale segment register values in particular). With the | |
| * hardware task-switch, there is no way to fix up bad state in | |
| * a reasonable manner. | |
| * | |
| * The fact that Intel documents the hardware task-switching to | |
| * be slow is a fairly red herring - this code is not noticeably | |
| * faster. However, there _is_ some room for improvement here, | |
| * so the performance issues may eventually be a valid point. | |
| * More important, however, is the fact that this allows us much | |
| * more flexibility. | |
| * | |
| * The return value (in %eax) will be the "prev" task after | |
| * the task-switch, and shows up in ret_from_fork in entry.S, | |
| * for example. | |
| */ | |
| struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct task_struct *next_p) | |
| { | |
| struct thread_struct *prev = &prev_p->thread, | |
| *next = &next_p->thread; | |
| int cpu = smp_processor_id(); | |
| struct tss_struct *tss = &per_cpu(init_tss, cpu); | |
| /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ | |
| __unlazy_fpu(prev_p); | |
| /* | |
| * Reload esp0. | |
| */ | |
| load_esp0(tss, next); | |
| /* | |
| * Save away %fs and %gs. No need to save %es and %ds, as | |
| * those are always kernel segments while inside the kernel. | |
| * Doing this before setting the new TLS descriptors avoids | |
| * the situation where we temporarily have non-reloadable | |
| * segments in %fs and %gs. This could be an issue if the | |
| * NMI handler ever used %fs or %gs (it does not today), or | |
| * if the kernel is running inside of a hypervisor layer. | |
| */ | |
| savesegment(fs, prev->fs); | |
| savesegment(gs, prev->gs); | |
| /* | |
| * Load the per-thread Thread-Local Storage descriptor. | |
| */ | |
| load_TLS(next, cpu); | |
| /* | |
| * Restore %fs and %gs if needed. | |
| * | |
| * Glibc normally makes %fs be zero, and %gs is one of | |
| * the TLS segments. | |
| */ | |
| if (unlikely(prev->fs | next->fs)) | |
| loadsegment(fs, next->fs); | |
| if (prev->gs | next->gs) | |
| loadsegment(gs, next->gs); | |
| /* | |
| * Restore IOPL if needed. | |
| */ | |
| if (unlikely(prev->iopl != next->iopl)) | |
| set_iopl_mask(next->iopl); | |
| /* | |
| * Now maybe handle debug registers and/or IO bitmaps | |
| */ | |
| if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW) | |
| || test_tsk_thread_flag(prev_p, TIF_IO_BITMAP))) | |
| __switch_to_xtra(next_p, tss); | |
| disable_tsc(prev_p, next_p); | |
| return prev_p; | |
| } | |
| asmlinkage int sys_fork(struct pt_regs regs) | |
| { | |
| return do_fork(SIGCHLD, regs.esp, ®s, 0, NULL, NULL); | |
| } | |
| asmlinkage int sys_clone(struct pt_regs regs) | |
| { | |
| unsigned long clone_flags; | |
| unsigned long newsp; | |
| int __user *parent_tidptr, *child_tidptr; | |
| clone_flags = regs.ebx; | |
| newsp = regs.ecx; | |
| parent_tidptr = (int __user *)regs.edx; | |
| child_tidptr = (int __user *)regs.edi; | |
| if (!newsp) | |
| newsp = regs.esp; | |
| return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr); | |
| } | |
| /* | |
| * This is trivial, and on the face of it looks like it | |
| * could equally well be done in user mode. | |
| * | |
| * Not so, for quite unobvious reasons - register pressure. | |
| * In user mode vfork() cannot have a stack frame, and if | |
| * done by calling the "clone()" system call directly, you | |
| * do not have enough call-clobbered registers to hold all | |
| * the information you need. | |
| */ | |
| asmlinkage int sys_vfork(struct pt_regs regs) | |
| { | |
| return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.esp, ®s, 0, NULL, NULL); | |
| } | |
| /* | |
| * sys_execve() executes a new program. | |
| */ | |
| asmlinkage int sys_execve(struct pt_regs regs) | |
| { | |
| int error; | |
| char * filename; | |
| filename = getname((char __user *) regs.ebx); | |
| error = PTR_ERR(filename); | |
| if (IS_ERR(filename)) | |
| goto out; | |
| error = do_execve(filename, | |
| (char __user * __user *) regs.ecx, | |
| (char __user * __user *) regs.edx, | |
| ®s); | |
| if (error == 0) { | |
| task_lock(current); | |
| current->ptrace &= ~PT_DTRACE; | |
| task_unlock(current); | |
| /* Make sure we don't return using sysenter.. */ | |
| set_thread_flag(TIF_IRET); | |
| } | |
| putname(filename); | |
| out: | |
| return error; | |
| } | |
| #define top_esp (THREAD_SIZE - sizeof(unsigned long)) | |
| #define top_ebp (THREAD_SIZE - 2*sizeof(unsigned long)) | |
| unsigned long get_wchan(struct task_struct *p) | |
| { | |
| unsigned long ebp, esp, eip; | |
| unsigned long stack_page; | |
| int count = 0; | |
| if (!p || p == current || p->state == TASK_RUNNING) | |
| return 0; | |
| stack_page = (unsigned long)task_stack_page(p); | |
| esp = p->thread.esp; | |
| if (!stack_page || esp < stack_page || esp > top_esp+stack_page) | |
| return 0; | |
| /* include/asm-i386/system.h:switch_to() pushes ebp last. */ | |
| ebp = *(unsigned long *) esp; | |
| do { | |
| if (ebp < stack_page || ebp > top_ebp+stack_page) | |
| return 0; | |
| eip = *(unsigned long *) (ebp+4); | |
| if (!in_sched_functions(eip)) | |
| return eip; | |
| ebp = *(unsigned long *) ebp; | |
| } while (count++ < 16); | |
| return 0; | |
| } | |
| /* | |
| * sys_alloc_thread_area: get a yet unused TLS descriptor index. | |
| */ | |
| static int get_free_idx(void) | |
| { | |
| struct thread_struct *t = ¤t->thread; | |
| int idx; | |
| for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++) | |
| if (desc_empty(t->tls_array + idx)) | |
| return idx + GDT_ENTRY_TLS_MIN; | |
| return -ESRCH; | |
| } | |
| /* | |
| * Set a given TLS descriptor: | |
| */ | |
| asmlinkage int sys_set_thread_area(struct user_desc __user *u_info) | |
| { | |
| struct thread_struct *t = ¤t->thread; | |
| struct user_desc info; | |
| struct desc_struct *desc; | |
| int cpu, idx; | |
| if (copy_from_user(&info, u_info, sizeof(info))) | |
| return -EFAULT; | |
| idx = info.entry_number; | |
| /* | |
| * index -1 means the kernel should try to find and | |
| * allocate an empty descriptor: | |
| */ | |
| if (idx == -1) { | |
| idx = get_free_idx(); | |
| if (idx < 0) | |
| return idx; | |
| if (put_user(idx, &u_info->entry_number)) | |
| return -EFAULT; | |
| } | |
| if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) | |
| return -EINVAL; | |
| desc = t->tls_array + idx - GDT_ENTRY_TLS_MIN; | |
| /* | |
| * We must not get preempted while modifying the TLS. | |
| */ | |
| cpu = get_cpu(); | |
| if (LDT_empty(&info)) { | |
| desc->a = 0; | |
| desc->b = 0; | |
| } else { | |
| desc->a = LDT_entry_a(&info); | |
| desc->b = LDT_entry_b(&info); | |
| } | |
| load_TLS(t, cpu); | |
| put_cpu(); | |
| return 0; | |
| } | |
| /* | |
| * Get the current Thread-Local Storage area: | |
| */ | |
| #define GET_BASE(desc) ( \ | |
| (((desc)->a >> 16) & 0x0000ffff) | \ | |
| (((desc)->b << 16) & 0x00ff0000) | \ | |
| ( (desc)->b & 0xff000000) ) | |
| #define GET_LIMIT(desc) ( \ | |
| ((desc)->a & 0x0ffff) | \ | |
| ((desc)->b & 0xf0000) ) | |
| #define GET_32BIT(desc) (((desc)->b >> 22) & 1) | |
| #define GET_CONTENTS(desc) (((desc)->b >> 10) & 3) | |
| #define GET_WRITABLE(desc) (((desc)->b >> 9) & 1) | |
| #define GET_LIMIT_PAGES(desc) (((desc)->b >> 23) & 1) | |
| #define GET_PRESENT(desc) (((desc)->b >> 15) & 1) | |
| #define GET_USEABLE(desc) (((desc)->b >> 20) & 1) | |
| asmlinkage int sys_get_thread_area(struct user_desc __user *u_info) | |
| { | |
| struct user_desc info; | |
| struct desc_struct *desc; | |
| int idx; | |
| if (get_user(idx, &u_info->entry_number)) | |
| return -EFAULT; | |
| if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) | |
| return -EINVAL; | |
| memset(&info, 0, sizeof(info)); | |
| desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN; | |
| info.entry_number = idx; | |
| info.base_addr = GET_BASE(desc); | |
| info.limit = GET_LIMIT(desc); | |
| info.seg_32bit = GET_32BIT(desc); | |
| info.contents = GET_CONTENTS(desc); | |
| info.read_exec_only = !GET_WRITABLE(desc); | |
| info.limit_in_pages = GET_LIMIT_PAGES(desc); | |
| info.seg_not_present = !GET_PRESENT(desc); | |
| info.useable = GET_USEABLE(desc); | |
| if (copy_to_user(u_info, &info, sizeof(info))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| unsigned long arch_align_stack(unsigned long sp) | |
| { | |
| if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) | |
| sp -= get_random_int() % 8192; | |
| return sp & ~0xf; | |
| } |