| /* | |
| * This code largely moved from arch/i386/kernel/timer/timer_tsc.c | |
| * which was originally moved from arch/i386/kernel/time.c. | |
| * See comments there for proper credits. | |
| */ | |
| #include <linux/clocksource.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/init.h> | |
| #include <linux/dmi.h> | |
| #include <asm/delay.h> | |
| #include <asm/tsc.h> | |
| #include <asm/delay.h> | |
| #include <asm/io.h> | |
| #include "mach_timer.h" | |
| /* | |
| * On some systems the TSC frequency does not | |
| * change with the cpu frequency. So we need | |
| * an extra value to store the TSC freq | |
| */ | |
| unsigned int tsc_khz; | |
| int tsc_disable __cpuinitdata = 0; | |
| #ifdef CONFIG_X86_TSC | |
| static int __init tsc_setup(char *str) | |
| { | |
| printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " | |
| "cannot disable TSC.\n"); | |
| return 1; | |
| } | |
| #else | |
| /* | |
| * disable flag for tsc. Takes effect by clearing the TSC cpu flag | |
| * in cpu/common.c | |
| */ | |
| static int __init tsc_setup(char *str) | |
| { | |
| tsc_disable = 1; | |
| return 1; | |
| } | |
| #endif | |
| __setup("notsc", tsc_setup); | |
| /* | |
| * code to mark and check if the TSC is unstable | |
| * due to cpufreq or due to unsynced TSCs | |
| */ | |
| static int tsc_unstable; | |
| static inline int check_tsc_unstable(void) | |
| { | |
| return tsc_unstable; | |
| } | |
| void mark_tsc_unstable(void) | |
| { | |
| tsc_unstable = 1; | |
| } | |
| EXPORT_SYMBOL_GPL(mark_tsc_unstable); | |
| /* Accellerators for sched_clock() | |
| * convert from cycles(64bits) => nanoseconds (64bits) | |
| * basic equation: | |
| * ns = cycles / (freq / ns_per_sec) | |
| * ns = cycles * (ns_per_sec / freq) | |
| * ns = cycles * (10^9 / (cpu_khz * 10^3)) | |
| * ns = cycles * (10^6 / cpu_khz) | |
| * | |
| * Then we use scaling math (suggested by george@mvista.com) to get: | |
| * ns = cycles * (10^6 * SC / cpu_khz) / SC | |
| * ns = cycles * cyc2ns_scale / SC | |
| * | |
| * And since SC is a constant power of two, we can convert the div | |
| * into a shift. | |
| * | |
| * We can use khz divisor instead of mhz to keep a better percision, since | |
| * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. | |
| * (mathieu.desnoyers@polymtl.ca) | |
| * | |
| * -johnstul@us.ibm.com "math is hard, lets go shopping!" | |
| */ | |
| static unsigned long cyc2ns_scale __read_mostly; | |
| #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ | |
| static inline void set_cyc2ns_scale(unsigned long cpu_khz) | |
| { | |
| cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; | |
| } | |
| static inline unsigned long long cycles_2_ns(unsigned long long cyc) | |
| { | |
| return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; | |
| } | |
| /* | |
| * Scheduler clock - returns current time in nanosec units. | |
| */ | |
| unsigned long long sched_clock(void) | |
| { | |
| unsigned long long this_offset; | |
| /* | |
| * in the NUMA case we dont use the TSC as they are not | |
| * synchronized across all CPUs. | |
| */ | |
| #ifndef CONFIG_NUMA | |
| if (!cpu_khz || check_tsc_unstable()) | |
| #endif | |
| /* no locking but a rare wrong value is not a big deal */ | |
| return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); | |
| /* read the Time Stamp Counter: */ | |
| rdtscll(this_offset); | |
| /* return the value in ns */ | |
| return cycles_2_ns(this_offset); | |
| } | |
| static unsigned long calculate_cpu_khz(void) | |
| { | |
| unsigned long long start, end; | |
| unsigned long count; | |
| u64 delta64; | |
| int i; | |
| unsigned long flags; | |
| local_irq_save(flags); | |
| /* run 3 times to ensure the cache is warm */ | |
| for (i = 0; i < 3; i++) { | |
| mach_prepare_counter(); | |
| rdtscll(start); | |
| mach_countup(&count); | |
| rdtscll(end); | |
| } | |
| /* | |
| * Error: ECTCNEVERSET | |
| * The CTC wasn't reliable: we got a hit on the very first read, | |
| * or the CPU was so fast/slow that the quotient wouldn't fit in | |
| * 32 bits.. | |
| */ | |
| if (count <= 1) | |
| goto err; | |
| delta64 = end - start; | |
| /* cpu freq too fast: */ | |
| if (delta64 > (1ULL<<32)) | |
| goto err; | |
| /* cpu freq too slow: */ | |
| if (delta64 <= CALIBRATE_TIME_MSEC) | |
| goto err; | |
| delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */ | |
| do_div(delta64,CALIBRATE_TIME_MSEC); | |
| local_irq_restore(flags); | |
| return (unsigned long)delta64; | |
| err: | |
| local_irq_restore(flags); | |
| return 0; | |
| } | |
| int recalibrate_cpu_khz(void) | |
| { | |
| #ifndef CONFIG_SMP | |
| unsigned long cpu_khz_old = cpu_khz; | |
| if (cpu_has_tsc) { | |
| cpu_khz = calculate_cpu_khz(); | |
| tsc_khz = cpu_khz; | |
| cpu_data[0].loops_per_jiffy = | |
| cpufreq_scale(cpu_data[0].loops_per_jiffy, | |
| cpu_khz_old, cpu_khz); | |
| return 0; | |
| } else | |
| return -ENODEV; | |
| #else | |
| return -ENODEV; | |
| #endif | |
| } | |
| EXPORT_SYMBOL(recalibrate_cpu_khz); | |
| void __init tsc_init(void) | |
| { | |
| if (!cpu_has_tsc || tsc_disable) | |
| return; | |
| cpu_khz = calculate_cpu_khz(); | |
| tsc_khz = cpu_khz; | |
| if (!cpu_khz) | |
| return; | |
| printk("Detected %lu.%03lu MHz processor.\n", | |
| (unsigned long)cpu_khz / 1000, | |
| (unsigned long)cpu_khz % 1000); | |
| set_cyc2ns_scale(cpu_khz); | |
| use_tsc_delay(); | |
| } | |
| #ifdef CONFIG_CPU_FREQ | |
| static unsigned int cpufreq_delayed_issched = 0; | |
| static unsigned int cpufreq_init = 0; | |
| static struct work_struct cpufreq_delayed_get_work; | |
| static void handle_cpufreq_delayed_get(void *v) | |
| { | |
| unsigned int cpu; | |
| for_each_online_cpu(cpu) | |
| cpufreq_get(cpu); | |
| cpufreq_delayed_issched = 0; | |
| } | |
| /* | |
| * if we notice cpufreq oddness, schedule a call to cpufreq_get() as it tries | |
| * to verify the CPU frequency the timing core thinks the CPU is running | |
| * at is still correct. | |
| */ | |
| static inline void cpufreq_delayed_get(void) | |
| { | |
| if (cpufreq_init && !cpufreq_delayed_issched) { | |
| cpufreq_delayed_issched = 1; | |
| printk(KERN_DEBUG "Checking if CPU frequency changed.\n"); | |
| schedule_work(&cpufreq_delayed_get_work); | |
| } | |
| } | |
| /* | |
| * if the CPU frequency is scaled, TSC-based delays will need a different | |
| * loops_per_jiffy value to function properly. | |
| */ | |
| static unsigned int ref_freq = 0; | |
| static unsigned long loops_per_jiffy_ref = 0; | |
| static unsigned long cpu_khz_ref = 0; | |
| static int | |
| time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) | |
| { | |
| struct cpufreq_freqs *freq = data; | |
| if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) | |
| write_seqlock_irq(&xtime_lock); | |
| if (!ref_freq) { | |
| if (!freq->old){ | |
| ref_freq = freq->new; | |
| goto end; | |
| } | |
| ref_freq = freq->old; | |
| loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy; | |
| cpu_khz_ref = cpu_khz; | |
| } | |
| if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || | |
| (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || | |
| (val == CPUFREQ_RESUMECHANGE)) { | |
| if (!(freq->flags & CPUFREQ_CONST_LOOPS)) | |
| cpu_data[freq->cpu].loops_per_jiffy = | |
| cpufreq_scale(loops_per_jiffy_ref, | |
| ref_freq, freq->new); | |
| if (cpu_khz) { | |
| if (num_online_cpus() == 1) | |
| cpu_khz = cpufreq_scale(cpu_khz_ref, | |
| ref_freq, freq->new); | |
| if (!(freq->flags & CPUFREQ_CONST_LOOPS)) { | |
| tsc_khz = cpu_khz; | |
| set_cyc2ns_scale(cpu_khz); | |
| /* | |
| * TSC based sched_clock turns | |
| * to junk w/ cpufreq | |
| */ | |
| mark_tsc_unstable(); | |
| } | |
| } | |
| } | |
| end: | |
| if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) | |
| write_sequnlock_irq(&xtime_lock); | |
| return 0; | |
| } | |
| static struct notifier_block time_cpufreq_notifier_block = { | |
| .notifier_call = time_cpufreq_notifier | |
| }; | |
| static int __init cpufreq_tsc(void) | |
| { | |
| int ret; | |
| INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL); | |
| ret = cpufreq_register_notifier(&time_cpufreq_notifier_block, | |
| CPUFREQ_TRANSITION_NOTIFIER); | |
| if (!ret) | |
| cpufreq_init = 1; | |
| return ret; | |
| } | |
| core_initcall(cpufreq_tsc); | |
| #endif | |
| /* clock source code */ | |
| static unsigned long current_tsc_khz = 0; | |
| static int tsc_update_callback(void); | |
| static cycle_t read_tsc(void) | |
| { | |
| cycle_t ret; | |
| rdtscll(ret); | |
| return ret; | |
| } | |
| static struct clocksource clocksource_tsc = { | |
| .name = "tsc", | |
| .rating = 300, | |
| .read = read_tsc, | |
| .mask = CLOCKSOURCE_MASK(64), | |
| .mult = 0, /* to be set */ | |
| .shift = 22, | |
| .update_callback = tsc_update_callback, | |
| .is_continuous = 1, | |
| }; | |
| static int tsc_update_callback(void) | |
| { | |
| int change = 0; | |
| /* check to see if we should switch to the safe clocksource: */ | |
| if (clocksource_tsc.rating != 0 && check_tsc_unstable()) { | |
| clocksource_tsc.rating = 0; | |
| clocksource_reselect(); | |
| change = 1; | |
| } | |
| /* only update if tsc_khz has changed: */ | |
| if (current_tsc_khz != tsc_khz) { | |
| current_tsc_khz = tsc_khz; | |
| clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, | |
| clocksource_tsc.shift); | |
| change = 1; | |
| } | |
| return change; | |
| } | |
| static int __init dmi_mark_tsc_unstable(struct dmi_system_id *d) | |
| { | |
| printk(KERN_NOTICE "%s detected: marking TSC unstable.\n", | |
| d->ident); | |
| mark_tsc_unstable(); | |
| return 0; | |
| } | |
| /* List of systems that have known TSC problems */ | |
| static struct dmi_system_id __initdata bad_tsc_dmi_table[] = { | |
| { | |
| .callback = dmi_mark_tsc_unstable, | |
| .ident = "IBM Thinkpad 380XD", | |
| .matches = { | |
| DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), | |
| DMI_MATCH(DMI_BOARD_NAME, "2635FA0"), | |
| }, | |
| }, | |
| {} | |
| }; | |
| #define TSC_FREQ_CHECK_INTERVAL (10*MSEC_PER_SEC) /* 10sec in MS */ | |
| static struct timer_list verify_tsc_freq_timer; | |
| /* XXX - Probably should add locking */ | |
| static void verify_tsc_freq(unsigned long unused) | |
| { | |
| static u64 last_tsc; | |
| static unsigned long last_jiffies; | |
| u64 now_tsc, interval_tsc; | |
| unsigned long now_jiffies, interval_jiffies; | |
| if (check_tsc_unstable()) | |
| return; | |
| rdtscll(now_tsc); | |
| now_jiffies = jiffies; | |
| if (!last_jiffies) { | |
| goto out; | |
| } | |
| interval_jiffies = now_jiffies - last_jiffies; | |
| interval_tsc = now_tsc - last_tsc; | |
| interval_tsc *= HZ; | |
| do_div(interval_tsc, cpu_khz*1000); | |
| if (interval_tsc < (interval_jiffies * 3 / 4)) { | |
| printk("TSC appears to be running slowly. " | |
| "Marking it as unstable\n"); | |
| mark_tsc_unstable(); | |
| return; | |
| } | |
| out: | |
| last_tsc = now_tsc; | |
| last_jiffies = now_jiffies; | |
| /* set us up to go off on the next interval: */ | |
| mod_timer(&verify_tsc_freq_timer, | |
| jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL)); | |
| } | |
| /* | |
| * Make an educated guess if the TSC is trustworthy and synchronized | |
| * over all CPUs. | |
| */ | |
| static __init int unsynchronized_tsc(void) | |
| { | |
| /* | |
| * Intel systems are normally all synchronized. | |
| * Exceptions must mark TSC as unstable: | |
| */ | |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) | |
| return 0; | |
| /* assume multi socket systems are not synchronized: */ | |
| return num_possible_cpus() > 1; | |
| } | |
| static int __init init_tsc_clocksource(void) | |
| { | |
| if (cpu_has_tsc && tsc_khz && !tsc_disable) { | |
| /* check blacklist */ | |
| dmi_check_system(bad_tsc_dmi_table); | |
| if (unsynchronized_tsc()) /* mark unstable if unsynced */ | |
| mark_tsc_unstable(); | |
| current_tsc_khz = tsc_khz; | |
| clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, | |
| clocksource_tsc.shift); | |
| /* lower the rating if we already know its unstable: */ | |
| if (check_tsc_unstable()) | |
| clocksource_tsc.rating = 0; | |
| init_timer(&verify_tsc_freq_timer); | |
| verify_tsc_freq_timer.function = verify_tsc_freq; | |
| verify_tsc_freq_timer.expires = | |
| jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL); | |
| add_timer(&verify_tsc_freq_timer); | |
| return clocksource_register(&clocksource_tsc); | |
| } | |
| return 0; | |
| } | |
| module_init(init_tsc_clocksource); |