| /* | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved. | |
| */ | |
| /* | |
| * Cross Partition Communication (XPC) support - standard version. | |
| * | |
| * XPC provides a message passing capability that crosses partition | |
| * boundaries. This module is made up of two parts: | |
| * | |
| * partition This part detects the presence/absence of other | |
| * partitions. It provides a heartbeat and monitors | |
| * the heartbeats of other partitions. | |
| * | |
| * channel This part manages the channels and sends/receives | |
| * messages across them to/from other partitions. | |
| * | |
| * There are a couple of additional functions residing in XP, which | |
| * provide an interface to XPC for its users. | |
| * | |
| * | |
| * Caveats: | |
| * | |
| * . We currently have no way to determine which nasid an IPI came | |
| * from. Thus, xpc_IPI_send() does a remote AMO write followed by | |
| * an IPI. The AMO indicates where data is to be pulled from, so | |
| * after the IPI arrives, the remote partition checks the AMO word. | |
| * The IPI can actually arrive before the AMO however, so other code | |
| * must periodically check for this case. Also, remote AMO operations | |
| * do not reliably time out. Thus we do a remote PIO read solely to | |
| * know whether the remote partition is down and whether we should | |
| * stop sending IPIs to it. This remote PIO read operation is set up | |
| * in a special nofault region so SAL knows to ignore (and cleanup) | |
| * any errors due to the remote AMO write, PIO read, and/or PIO | |
| * write operations. | |
| * | |
| * If/when new hardware solves this IPI problem, we should abandon | |
| * the current approach. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/sched.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/cache.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/delay.h> | |
| #include <linux/reboot.h> | |
| #include <linux/completion.h> | |
| #include <asm/sn/intr.h> | |
| #include <asm/sn/sn_sal.h> | |
| #include <asm/kdebug.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/sn/xpc.h> | |
| /* define two XPC debug device structures to be used with dev_dbg() et al */ | |
| struct device_driver xpc_dbg_name = { | |
| .name = "xpc" | |
| }; | |
| struct device xpc_part_dbg_subname = { | |
| .bus_id = {0}, /* set to "part" at xpc_init() time */ | |
| .driver = &xpc_dbg_name | |
| }; | |
| struct device xpc_chan_dbg_subname = { | |
| .bus_id = {0}, /* set to "chan" at xpc_init() time */ | |
| .driver = &xpc_dbg_name | |
| }; | |
| struct device *xpc_part = &xpc_part_dbg_subname; | |
| struct device *xpc_chan = &xpc_chan_dbg_subname; | |
| static int xpc_kdebug_ignore; | |
| /* systune related variables for /proc/sys directories */ | |
| static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL; | |
| static int xpc_hb_min_interval = 1; | |
| static int xpc_hb_max_interval = 10; | |
| static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL; | |
| static int xpc_hb_check_min_interval = 10; | |
| static int xpc_hb_check_max_interval = 120; | |
| int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT; | |
| static int xpc_disengage_request_min_timelimit = 0; | |
| static int xpc_disengage_request_max_timelimit = 120; | |
| static ctl_table xpc_sys_xpc_hb_dir[] = { | |
| { | |
| 1, | |
| "hb_interval", | |
| &xpc_hb_interval, | |
| sizeof(int), | |
| 0644, | |
| NULL, | |
| &proc_dointvec_minmax, | |
| &sysctl_intvec, | |
| NULL, | |
| &xpc_hb_min_interval, | |
| &xpc_hb_max_interval | |
| }, | |
| { | |
| 2, | |
| "hb_check_interval", | |
| &xpc_hb_check_interval, | |
| sizeof(int), | |
| 0644, | |
| NULL, | |
| &proc_dointvec_minmax, | |
| &sysctl_intvec, | |
| NULL, | |
| &xpc_hb_check_min_interval, | |
| &xpc_hb_check_max_interval | |
| }, | |
| {0} | |
| }; | |
| static ctl_table xpc_sys_xpc_dir[] = { | |
| { | |
| 1, | |
| "hb", | |
| NULL, | |
| 0, | |
| 0555, | |
| xpc_sys_xpc_hb_dir | |
| }, | |
| { | |
| 2, | |
| "disengage_request_timelimit", | |
| &xpc_disengage_request_timelimit, | |
| sizeof(int), | |
| 0644, | |
| NULL, | |
| &proc_dointvec_minmax, | |
| &sysctl_intvec, | |
| NULL, | |
| &xpc_disengage_request_min_timelimit, | |
| &xpc_disengage_request_max_timelimit | |
| }, | |
| {0} | |
| }; | |
| static ctl_table xpc_sys_dir[] = { | |
| { | |
| 1, | |
| "xpc", | |
| NULL, | |
| 0, | |
| 0555, | |
| xpc_sys_xpc_dir | |
| }, | |
| {0} | |
| }; | |
| static struct ctl_table_header *xpc_sysctl; | |
| /* non-zero if any remote partition disengage request was timed out */ | |
| int xpc_disengage_request_timedout; | |
| /* #of IRQs received */ | |
| static atomic_t xpc_act_IRQ_rcvd; | |
| /* IRQ handler notifies this wait queue on receipt of an IRQ */ | |
| static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); | |
| static unsigned long xpc_hb_check_timeout; | |
| /* notification that the xpc_hb_checker thread has exited */ | |
| static DECLARE_COMPLETION(xpc_hb_checker_exited); | |
| /* notification that the xpc_discovery thread has exited */ | |
| static DECLARE_COMPLETION(xpc_discovery_exited); | |
| static struct timer_list xpc_hb_timer; | |
| static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *); | |
| static int xpc_system_reboot(struct notifier_block *, unsigned long, void *); | |
| static struct notifier_block xpc_reboot_notifier = { | |
| .notifier_call = xpc_system_reboot, | |
| }; | |
| static int xpc_system_die(struct notifier_block *, unsigned long, void *); | |
| static struct notifier_block xpc_die_notifier = { | |
| .notifier_call = xpc_system_die, | |
| }; | |
| /* | |
| * Timer function to enforce the timelimit on the partition disengage request. | |
| */ | |
| static void | |
| xpc_timeout_partition_disengage_request(unsigned long data) | |
| { | |
| struct xpc_partition *part = (struct xpc_partition *) data; | |
| DBUG_ON(jiffies < part->disengage_request_timeout); | |
| (void) xpc_partition_disengaged(part); | |
| DBUG_ON(part->disengage_request_timeout != 0); | |
| DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0); | |
| } | |
| /* | |
| * Notify the heartbeat check thread that an IRQ has been received. | |
| */ | |
| static irqreturn_t | |
| xpc_act_IRQ_handler(int irq, void *dev_id) | |
| { | |
| atomic_inc(&xpc_act_IRQ_rcvd); | |
| wake_up_interruptible(&xpc_act_IRQ_wq); | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * Timer to produce the heartbeat. The timer structures function is | |
| * already set when this is initially called. A tunable is used to | |
| * specify when the next timeout should occur. | |
| */ | |
| static void | |
| xpc_hb_beater(unsigned long dummy) | |
| { | |
| xpc_vars->heartbeat++; | |
| if (jiffies >= xpc_hb_check_timeout) { | |
| wake_up_interruptible(&xpc_act_IRQ_wq); | |
| } | |
| xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ); | |
| add_timer(&xpc_hb_timer); | |
| } | |
| /* | |
| * This thread is responsible for nearly all of the partition | |
| * activation/deactivation. | |
| */ | |
| static int | |
| xpc_hb_checker(void *ignore) | |
| { | |
| int last_IRQ_count = 0; | |
| int new_IRQ_count; | |
| int force_IRQ=0; | |
| /* this thread was marked active by xpc_hb_init() */ | |
| daemonize(XPC_HB_CHECK_THREAD_NAME); | |
| set_cpus_allowed(current, cpumask_of_cpu(XPC_HB_CHECK_CPU)); | |
| xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); | |
| while (!(volatile int) xpc_exiting) { | |
| dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have " | |
| "been received\n", | |
| (int) (xpc_hb_check_timeout - jiffies), | |
| atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count); | |
| /* checking of remote heartbeats is skewed by IRQ handling */ | |
| if (jiffies >= xpc_hb_check_timeout) { | |
| dev_dbg(xpc_part, "checking remote heartbeats\n"); | |
| xpc_check_remote_hb(); | |
| /* | |
| * We need to periodically recheck to ensure no | |
| * IPI/AMO pairs have been missed. That check | |
| * must always reset xpc_hb_check_timeout. | |
| */ | |
| force_IRQ = 1; | |
| } | |
| /* check for outstanding IRQs */ | |
| new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd); | |
| if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) { | |
| force_IRQ = 0; | |
| dev_dbg(xpc_part, "found an IRQ to process; will be " | |
| "resetting xpc_hb_check_timeout\n"); | |
| last_IRQ_count += xpc_identify_act_IRQ_sender(); | |
| if (last_IRQ_count < new_IRQ_count) { | |
| /* retry once to help avoid missing AMO */ | |
| (void) xpc_identify_act_IRQ_sender(); | |
| } | |
| last_IRQ_count = new_IRQ_count; | |
| xpc_hb_check_timeout = jiffies + | |
| (xpc_hb_check_interval * HZ); | |
| } | |
| /* wait for IRQ or timeout */ | |
| (void) wait_event_interruptible(xpc_act_IRQ_wq, | |
| (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) || | |
| jiffies >= xpc_hb_check_timeout || | |
| (volatile int) xpc_exiting)); | |
| } | |
| dev_dbg(xpc_part, "heartbeat checker is exiting\n"); | |
| /* mark this thread as having exited */ | |
| complete(&xpc_hb_checker_exited); | |
| return 0; | |
| } | |
| /* | |
| * This thread will attempt to discover other partitions to activate | |
| * based on info provided by SAL. This new thread is short lived and | |
| * will exit once discovery is complete. | |
| */ | |
| static int | |
| xpc_initiate_discovery(void *ignore) | |
| { | |
| daemonize(XPC_DISCOVERY_THREAD_NAME); | |
| xpc_discovery(); | |
| dev_dbg(xpc_part, "discovery thread is exiting\n"); | |
| /* mark this thread as having exited */ | |
| complete(&xpc_discovery_exited); | |
| return 0; | |
| } | |
| /* | |
| * Establish first contact with the remote partititon. This involves pulling | |
| * the XPC per partition variables from the remote partition and waiting for | |
| * the remote partition to pull ours. | |
| */ | |
| static enum xpc_retval | |
| xpc_make_first_contact(struct xpc_partition *part) | |
| { | |
| enum xpc_retval ret; | |
| while ((ret = xpc_pull_remote_vars_part(part)) != xpcSuccess) { | |
| if (ret != xpcRetry) { | |
| XPC_DEACTIVATE_PARTITION(part, ret); | |
| return ret; | |
| } | |
| dev_dbg(xpc_chan, "waiting to make first contact with " | |
| "partition %d\n", XPC_PARTID(part)); | |
| /* wait a 1/4 of a second or so */ | |
| (void) msleep_interruptible(250); | |
| if (part->act_state == XPC_P_DEACTIVATING) { | |
| return part->reason; | |
| } | |
| } | |
| return xpc_mark_partition_active(part); | |
| } | |
| /* | |
| * The first kthread assigned to a newly activated partition is the one | |
| * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to | |
| * that kthread until the partition is brought down, at which time that kthread | |
| * returns back to XPC HB. (The return of that kthread will signify to XPC HB | |
| * that XPC has dismantled all communication infrastructure for the associated | |
| * partition.) This kthread becomes the channel manager for that partition. | |
| * | |
| * Each active partition has a channel manager, who, besides connecting and | |
| * disconnecting channels, will ensure that each of the partition's connected | |
| * channels has the required number of assigned kthreads to get the work done. | |
| */ | |
| static void | |
| xpc_channel_mgr(struct xpc_partition *part) | |
| { | |
| while (part->act_state != XPC_P_DEACTIVATING || | |
| atomic_read(&part->nchannels_active) > 0 || | |
| !xpc_partition_disengaged(part)) { | |
| xpc_process_channel_activity(part); | |
| /* | |
| * Wait until we've been requested to activate kthreads or | |
| * all of the channel's message queues have been torn down or | |
| * a signal is pending. | |
| * | |
| * The channel_mgr_requests is set to 1 after being awakened, | |
| * This is done to prevent the channel mgr from making one pass | |
| * through the loop for each request, since he will | |
| * be servicing all the requests in one pass. The reason it's | |
| * set to 1 instead of 0 is so that other kthreads will know | |
| * that the channel mgr is running and won't bother trying to | |
| * wake him up. | |
| */ | |
| atomic_dec(&part->channel_mgr_requests); | |
| (void) wait_event_interruptible(part->channel_mgr_wq, | |
| (atomic_read(&part->channel_mgr_requests) > 0 || | |
| (volatile u64) part->local_IPI_amo != 0 || | |
| ((volatile u8) part->act_state == | |
| XPC_P_DEACTIVATING && | |
| atomic_read(&part->nchannels_active) == 0 && | |
| xpc_partition_disengaged(part)))); | |
| atomic_set(&part->channel_mgr_requests, 1); | |
| // >>> Does it need to wakeup periodically as well? In case we | |
| // >>> miscalculated the #of kthreads to wakeup or create? | |
| } | |
| } | |
| /* | |
| * When XPC HB determines that a partition has come up, it will create a new | |
| * kthread and that kthread will call this function to attempt to set up the | |
| * basic infrastructure used for Cross Partition Communication with the newly | |
| * upped partition. | |
| * | |
| * The kthread that was created by XPC HB and which setup the XPC | |
| * infrastructure will remain assigned to the partition until the partition | |
| * goes down. At which time the kthread will teardown the XPC infrastructure | |
| * and then exit. | |
| * | |
| * XPC HB will put the remote partition's XPC per partition specific variables | |
| * physical address into xpc_partitions[partid].remote_vars_part_pa prior to | |
| * calling xpc_partition_up(). | |
| */ | |
| static void | |
| xpc_partition_up(struct xpc_partition *part) | |
| { | |
| DBUG_ON(part->channels != NULL); | |
| dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part)); | |
| if (xpc_setup_infrastructure(part) != xpcSuccess) { | |
| return; | |
| } | |
| /* | |
| * The kthread that XPC HB called us with will become the | |
| * channel manager for this partition. It will not return | |
| * back to XPC HB until the partition's XPC infrastructure | |
| * has been dismantled. | |
| */ | |
| (void) xpc_part_ref(part); /* this will always succeed */ | |
| if (xpc_make_first_contact(part) == xpcSuccess) { | |
| xpc_channel_mgr(part); | |
| } | |
| xpc_part_deref(part); | |
| xpc_teardown_infrastructure(part); | |
| } | |
| static int | |
| xpc_activating(void *__partid) | |
| { | |
| partid_t partid = (u64) __partid; | |
| struct xpc_partition *part = &xpc_partitions[partid]; | |
| unsigned long irq_flags; | |
| struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 }; | |
| int ret; | |
| DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); | |
| spin_lock_irqsave(&part->act_lock, irq_flags); | |
| if (part->act_state == XPC_P_DEACTIVATING) { | |
| part->act_state = XPC_P_INACTIVE; | |
| spin_unlock_irqrestore(&part->act_lock, irq_flags); | |
| part->remote_rp_pa = 0; | |
| return 0; | |
| } | |
| /* indicate the thread is activating */ | |
| DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ); | |
| part->act_state = XPC_P_ACTIVATING; | |
| XPC_SET_REASON(part, 0, 0); | |
| spin_unlock_irqrestore(&part->act_lock, irq_flags); | |
| dev_dbg(xpc_part, "bringing partition %d up\n", partid); | |
| daemonize("xpc%02d", partid); | |
| /* | |
| * This thread needs to run at a realtime priority to prevent a | |
| * significant performance degradation. | |
| */ | |
| ret = sched_setscheduler(current, SCHED_FIFO, ¶m); | |
| if (ret != 0) { | |
| dev_warn(xpc_part, "unable to set pid %d to a realtime " | |
| "priority, ret=%d\n", current->pid, ret); | |
| } | |
| /* allow this thread and its children to run on any CPU */ | |
| set_cpus_allowed(current, CPU_MASK_ALL); | |
| /* | |
| * Register the remote partition's AMOs with SAL so it can handle | |
| * and cleanup errors within that address range should the remote | |
| * partition go down. We don't unregister this range because it is | |
| * difficult to tell when outstanding writes to the remote partition | |
| * are finished and thus when it is safe to unregister. This should | |
| * not result in wasted space in the SAL xp_addr_region table because | |
| * we should get the same page for remote_amos_page_pa after module | |
| * reloads and system reboots. | |
| */ | |
| if (sn_register_xp_addr_region(part->remote_amos_page_pa, | |
| PAGE_SIZE, 1) < 0) { | |
| dev_warn(xpc_part, "xpc_partition_up(%d) failed to register " | |
| "xp_addr region\n", partid); | |
| spin_lock_irqsave(&part->act_lock, irq_flags); | |
| part->act_state = XPC_P_INACTIVE; | |
| XPC_SET_REASON(part, xpcPhysAddrRegFailed, __LINE__); | |
| spin_unlock_irqrestore(&part->act_lock, irq_flags); | |
| part->remote_rp_pa = 0; | |
| return 0; | |
| } | |
| xpc_allow_hb(partid, xpc_vars); | |
| xpc_IPI_send_activated(part); | |
| /* | |
| * xpc_partition_up() holds this thread and marks this partition as | |
| * XPC_P_ACTIVE by calling xpc_hb_mark_active(). | |
| */ | |
| (void) xpc_partition_up(part); | |
| xpc_disallow_hb(partid, xpc_vars); | |
| xpc_mark_partition_inactive(part); | |
| if (part->reason == xpcReactivating) { | |
| /* interrupting ourselves results in activating partition */ | |
| xpc_IPI_send_reactivate(part); | |
| } | |
| return 0; | |
| } | |
| void | |
| xpc_activate_partition(struct xpc_partition *part) | |
| { | |
| partid_t partid = XPC_PARTID(part); | |
| unsigned long irq_flags; | |
| pid_t pid; | |
| spin_lock_irqsave(&part->act_lock, irq_flags); | |
| DBUG_ON(part->act_state != XPC_P_INACTIVE); | |
| part->act_state = XPC_P_ACTIVATION_REQ; | |
| XPC_SET_REASON(part, xpcCloneKThread, __LINE__); | |
| spin_unlock_irqrestore(&part->act_lock, irq_flags); | |
| pid = kernel_thread(xpc_activating, (void *) ((u64) partid), 0); | |
| if (unlikely(pid <= 0)) { | |
| spin_lock_irqsave(&part->act_lock, irq_flags); | |
| part->act_state = XPC_P_INACTIVE; | |
| XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__); | |
| spin_unlock_irqrestore(&part->act_lock, irq_flags); | |
| } | |
| } | |
| /* | |
| * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified | |
| * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more | |
| * than one partition, we use an AMO_t structure per partition to indicate | |
| * whether a partition has sent an IPI or not. >>> If it has, then wake up the | |
| * associated kthread to handle it. | |
| * | |
| * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC | |
| * running on other partitions. | |
| * | |
| * Noteworthy Arguments: | |
| * | |
| * irq - Interrupt ReQuest number. NOT USED. | |
| * | |
| * dev_id - partid of IPI's potential sender. | |
| */ | |
| irqreturn_t | |
| xpc_notify_IRQ_handler(int irq, void *dev_id) | |
| { | |
| partid_t partid = (partid_t) (u64) dev_id; | |
| struct xpc_partition *part = &xpc_partitions[partid]; | |
| DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); | |
| if (xpc_part_ref(part)) { | |
| xpc_check_for_channel_activity(part); | |
| xpc_part_deref(part); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor | |
| * because the write to their associated IPI amo completed after the IRQ/IPI | |
| * was received. | |
| */ | |
| void | |
| xpc_dropped_IPI_check(struct xpc_partition *part) | |
| { | |
| if (xpc_part_ref(part)) { | |
| xpc_check_for_channel_activity(part); | |
| part->dropped_IPI_timer.expires = jiffies + | |
| XPC_P_DROPPED_IPI_WAIT; | |
| add_timer(&part->dropped_IPI_timer); | |
| xpc_part_deref(part); | |
| } | |
| } | |
| void | |
| xpc_activate_kthreads(struct xpc_channel *ch, int needed) | |
| { | |
| int idle = atomic_read(&ch->kthreads_idle); | |
| int assigned = atomic_read(&ch->kthreads_assigned); | |
| int wakeup; | |
| DBUG_ON(needed <= 0); | |
| if (idle > 0) { | |
| wakeup = (needed > idle) ? idle : needed; | |
| needed -= wakeup; | |
| dev_dbg(xpc_chan, "wakeup %d idle kthreads, partid=%d, " | |
| "channel=%d\n", wakeup, ch->partid, ch->number); | |
| /* only wakeup the requested number of kthreads */ | |
| wake_up_nr(&ch->idle_wq, wakeup); | |
| } | |
| if (needed <= 0) { | |
| return; | |
| } | |
| if (needed + assigned > ch->kthreads_assigned_limit) { | |
| needed = ch->kthreads_assigned_limit - assigned; | |
| // >>>should never be less than 0 | |
| if (needed <= 0) { | |
| return; | |
| } | |
| } | |
| dev_dbg(xpc_chan, "create %d new kthreads, partid=%d, channel=%d\n", | |
| needed, ch->partid, ch->number); | |
| xpc_create_kthreads(ch, needed); | |
| } | |
| /* | |
| * This function is where XPC's kthreads wait for messages to deliver. | |
| */ | |
| static void | |
| xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) | |
| { | |
| do { | |
| /* deliver messages to their intended recipients */ | |
| while ((volatile s64) ch->w_local_GP.get < | |
| (volatile s64) ch->w_remote_GP.put && | |
| !((volatile u32) ch->flags & | |
| XPC_C_DISCONNECTING)) { | |
| xpc_deliver_msg(ch); | |
| } | |
| if (atomic_inc_return(&ch->kthreads_idle) > | |
| ch->kthreads_idle_limit) { | |
| /* too many idle kthreads on this channel */ | |
| atomic_dec(&ch->kthreads_idle); | |
| break; | |
| } | |
| dev_dbg(xpc_chan, "idle kthread calling " | |
| "wait_event_interruptible_exclusive()\n"); | |
| (void) wait_event_interruptible_exclusive(ch->idle_wq, | |
| ((volatile s64) ch->w_local_GP.get < | |
| (volatile s64) ch->w_remote_GP.put || | |
| ((volatile u32) ch->flags & | |
| XPC_C_DISCONNECTING))); | |
| atomic_dec(&ch->kthreads_idle); | |
| } while (!((volatile u32) ch->flags & XPC_C_DISCONNECTING)); | |
| } | |
| static int | |
| xpc_daemonize_kthread(void *args) | |
| { | |
| partid_t partid = XPC_UNPACK_ARG1(args); | |
| u16 ch_number = XPC_UNPACK_ARG2(args); | |
| struct xpc_partition *part = &xpc_partitions[partid]; | |
| struct xpc_channel *ch; | |
| int n_needed; | |
| unsigned long irq_flags; | |
| daemonize("xpc%02dc%d", partid, ch_number); | |
| dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n", | |
| partid, ch_number); | |
| ch = &part->channels[ch_number]; | |
| if (!(ch->flags & XPC_C_DISCONNECTING)) { | |
| /* let registerer know that connection has been established */ | |
| spin_lock_irqsave(&ch->lock, irq_flags); | |
| if (!(ch->flags & XPC_C_CONNECTEDCALLOUT)) { | |
| ch->flags |= XPC_C_CONNECTEDCALLOUT; | |
| spin_unlock_irqrestore(&ch->lock, irq_flags); | |
| xpc_connected_callout(ch); | |
| spin_lock_irqsave(&ch->lock, irq_flags); | |
| ch->flags |= XPC_C_CONNECTEDCALLOUT_MADE; | |
| spin_unlock_irqrestore(&ch->lock, irq_flags); | |
| /* | |
| * It is possible that while the callout was being | |
| * made that the remote partition sent some messages. | |
| * If that is the case, we may need to activate | |
| * additional kthreads to help deliver them. We only | |
| * need one less than total #of messages to deliver. | |
| */ | |
| n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1; | |
| if (n_needed > 0 && | |
| !(ch->flags & XPC_C_DISCONNECTING)) { | |
| xpc_activate_kthreads(ch, n_needed); | |
| } | |
| } else { | |
| spin_unlock_irqrestore(&ch->lock, irq_flags); | |
| } | |
| xpc_kthread_waitmsgs(part, ch); | |
| } | |
| if (atomic_dec_return(&ch->kthreads_assigned) == 0) { | |
| spin_lock_irqsave(&ch->lock, irq_flags); | |
| if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) && | |
| !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) { | |
| ch->flags |= XPC_C_DISCONNECTINGCALLOUT; | |
| spin_unlock_irqrestore(&ch->lock, irq_flags); | |
| xpc_disconnect_callout(ch, xpcDisconnecting); | |
| spin_lock_irqsave(&ch->lock, irq_flags); | |
| ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE; | |
| } | |
| spin_unlock_irqrestore(&ch->lock, irq_flags); | |
| if (atomic_dec_return(&part->nchannels_engaged) == 0) { | |
| xpc_mark_partition_disengaged(part); | |
| xpc_IPI_send_disengage(part); | |
| } | |
| } | |
| xpc_msgqueue_deref(ch); | |
| dev_dbg(xpc_chan, "kthread exiting, partid=%d, channel=%d\n", | |
| partid, ch_number); | |
| xpc_part_deref(part); | |
| return 0; | |
| } | |
| /* | |
| * For each partition that XPC has established communications with, there is | |
| * a minimum of one kernel thread assigned to perform any operation that | |
| * may potentially sleep or block (basically the callouts to the asynchronous | |
| * functions registered via xpc_connect()). | |
| * | |
| * Additional kthreads are created and destroyed by XPC as the workload | |
| * demands. | |
| * | |
| * A kthread is assigned to one of the active channels that exists for a given | |
| * partition. | |
| */ | |
| void | |
| xpc_create_kthreads(struct xpc_channel *ch, int needed) | |
| { | |
| unsigned long irq_flags; | |
| pid_t pid; | |
| u64 args = XPC_PACK_ARGS(ch->partid, ch->number); | |
| struct xpc_partition *part = &xpc_partitions[ch->partid]; | |
| while (needed-- > 0) { | |
| /* | |
| * The following is done on behalf of the newly created | |
| * kthread. That kthread is responsible for doing the | |
| * counterpart to the following before it exits. | |
| */ | |
| (void) xpc_part_ref(part); | |
| xpc_msgqueue_ref(ch); | |
| if (atomic_inc_return(&ch->kthreads_assigned) == 1 && | |
| atomic_inc_return(&part->nchannels_engaged) == 1) { | |
| xpc_mark_partition_engaged(part); | |
| } | |
| pid = kernel_thread(xpc_daemonize_kthread, (void *) args, 0); | |
| if (pid < 0) { | |
| /* the fork failed */ | |
| if (atomic_dec_return(&ch->kthreads_assigned) == 0 && | |
| atomic_dec_return(&part->nchannels_engaged) == 0) { | |
| xpc_mark_partition_disengaged(part); | |
| xpc_IPI_send_disengage(part); | |
| } | |
| xpc_msgqueue_deref(ch); | |
| xpc_part_deref(part); | |
| if (atomic_read(&ch->kthreads_assigned) < | |
| ch->kthreads_idle_limit) { | |
| /* | |
| * Flag this as an error only if we have an | |
| * insufficient #of kthreads for the channel | |
| * to function. | |
| * | |
| * No xpc_msgqueue_ref() is needed here since | |
| * the channel mgr is doing this. | |
| */ | |
| spin_lock_irqsave(&ch->lock, irq_flags); | |
| XPC_DISCONNECT_CHANNEL(ch, xpcLackOfResources, | |
| &irq_flags); | |
| spin_unlock_irqrestore(&ch->lock, irq_flags); | |
| } | |
| break; | |
| } | |
| ch->kthreads_created++; // >>> temporary debug only!!! | |
| } | |
| } | |
| void | |
| xpc_disconnect_wait(int ch_number) | |
| { | |
| unsigned long irq_flags; | |
| partid_t partid; | |
| struct xpc_partition *part; | |
| struct xpc_channel *ch; | |
| int wakeup_channel_mgr; | |
| /* now wait for all callouts to the caller's function to cease */ | |
| for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { | |
| part = &xpc_partitions[partid]; | |
| if (!xpc_part_ref(part)) { | |
| continue; | |
| } | |
| ch = &part->channels[ch_number]; | |
| if (!(ch->flags & XPC_C_WDISCONNECT)) { | |
| xpc_part_deref(part); | |
| continue; | |
| } | |
| wait_for_completion(&ch->wdisconnect_wait); | |
| spin_lock_irqsave(&ch->lock, irq_flags); | |
| DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); | |
| wakeup_channel_mgr = 0; | |
| if (ch->delayed_IPI_flags) { | |
| if (part->act_state != XPC_P_DEACTIVATING) { | |
| spin_lock(&part->IPI_lock); | |
| XPC_SET_IPI_FLAGS(part->local_IPI_amo, | |
| ch->number, ch->delayed_IPI_flags); | |
| spin_unlock(&part->IPI_lock); | |
| wakeup_channel_mgr = 1; | |
| } | |
| ch->delayed_IPI_flags = 0; | |
| } | |
| ch->flags &= ~XPC_C_WDISCONNECT; | |
| spin_unlock_irqrestore(&ch->lock, irq_flags); | |
| if (wakeup_channel_mgr) { | |
| xpc_wakeup_channel_mgr(part); | |
| } | |
| xpc_part_deref(part); | |
| } | |
| } | |
| static void | |
| xpc_do_exit(enum xpc_retval reason) | |
| { | |
| partid_t partid; | |
| int active_part_count, printed_waiting_msg = 0; | |
| struct xpc_partition *part; | |
| unsigned long printmsg_time, disengage_request_timeout = 0; | |
| /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */ | |
| DBUG_ON(xpc_exiting == 1); | |
| /* | |
| * Let the heartbeat checker thread and the discovery thread | |
| * (if one is running) know that they should exit. Also wake up | |
| * the heartbeat checker thread in case it's sleeping. | |
| */ | |
| xpc_exiting = 1; | |
| wake_up_interruptible(&xpc_act_IRQ_wq); | |
| /* ignore all incoming interrupts */ | |
| free_irq(SGI_XPC_ACTIVATE, NULL); | |
| /* wait for the discovery thread to exit */ | |
| wait_for_completion(&xpc_discovery_exited); | |
| /* wait for the heartbeat checker thread to exit */ | |
| wait_for_completion(&xpc_hb_checker_exited); | |
| /* sleep for a 1/3 of a second or so */ | |
| (void) msleep_interruptible(300); | |
| /* wait for all partitions to become inactive */ | |
| printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); | |
| xpc_disengage_request_timedout = 0; | |
| do { | |
| active_part_count = 0; | |
| for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { | |
| part = &xpc_partitions[partid]; | |
| if (xpc_partition_disengaged(part) && | |
| part->act_state == XPC_P_INACTIVE) { | |
| continue; | |
| } | |
| active_part_count++; | |
| XPC_DEACTIVATE_PARTITION(part, reason); | |
| if (part->disengage_request_timeout > | |
| disengage_request_timeout) { | |
| disengage_request_timeout = | |
| part->disengage_request_timeout; | |
| } | |
| } | |
| if (xpc_partition_engaged(-1UL)) { | |
| if (time_after(jiffies, printmsg_time)) { | |
| dev_info(xpc_part, "waiting for remote " | |
| "partitions to disengage, timeout in " | |
| "%ld seconds\n", | |
| (disengage_request_timeout - jiffies) | |
| / HZ); | |
| printmsg_time = jiffies + | |
| (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); | |
| printed_waiting_msg = 1; | |
| } | |
| } else if (active_part_count > 0) { | |
| if (printed_waiting_msg) { | |
| dev_info(xpc_part, "waiting for local partition" | |
| " to disengage\n"); | |
| printed_waiting_msg = 0; | |
| } | |
| } else { | |
| if (!xpc_disengage_request_timedout) { | |
| dev_info(xpc_part, "all partitions have " | |
| "disengaged\n"); | |
| } | |
| break; | |
| } | |
| /* sleep for a 1/3 of a second or so */ | |
| (void) msleep_interruptible(300); | |
| } while (1); | |
| DBUG_ON(xpc_partition_engaged(-1UL)); | |
| /* indicate to others that our reserved page is uninitialized */ | |
| xpc_rsvd_page->vars_pa = 0; | |
| /* now it's time to eliminate our heartbeat */ | |
| del_timer_sync(&xpc_hb_timer); | |
| DBUG_ON(xpc_vars->heartbeating_to_mask != 0); | |
| if (reason == xpcUnloading) { | |
| /* take ourselves off of the reboot_notifier_list */ | |
| (void) unregister_reboot_notifier(&xpc_reboot_notifier); | |
| /* take ourselves off of the die_notifier list */ | |
| (void) unregister_die_notifier(&xpc_die_notifier); | |
| } | |
| /* close down protections for IPI operations */ | |
| xpc_restrict_IPI_ops(); | |
| /* clear the interface to XPC's functions */ | |
| xpc_clear_interface(); | |
| if (xpc_sysctl) { | |
| unregister_sysctl_table(xpc_sysctl); | |
| } | |
| kfree(xpc_remote_copy_buffer_base); | |
| } | |
| /* | |
| * This function is called when the system is being rebooted. | |
| */ | |
| static int | |
| xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused) | |
| { | |
| enum xpc_retval reason; | |
| switch (event) { | |
| case SYS_RESTART: | |
| reason = xpcSystemReboot; | |
| break; | |
| case SYS_HALT: | |
| reason = xpcSystemHalt; | |
| break; | |
| case SYS_POWER_OFF: | |
| reason = xpcSystemPoweroff; | |
| break; | |
| default: | |
| reason = xpcSystemGoingDown; | |
| } | |
| xpc_do_exit(reason); | |
| return NOTIFY_DONE; | |
| } | |
| /* | |
| * Notify other partitions to disengage from all references to our memory. | |
| */ | |
| static void | |
| xpc_die_disengage(void) | |
| { | |
| struct xpc_partition *part; | |
| partid_t partid; | |
| unsigned long engaged; | |
| long time, printmsg_time, disengage_request_timeout; | |
| /* keep xpc_hb_checker thread from doing anything (just in case) */ | |
| xpc_exiting = 1; | |
| xpc_vars->heartbeating_to_mask = 0; /* indicate we're deactivated */ | |
| for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { | |
| part = &xpc_partitions[partid]; | |
| if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part-> | |
| remote_vars_version)) { | |
| /* just in case it was left set by an earlier XPC */ | |
| xpc_clear_partition_engaged(1UL << partid); | |
| continue; | |
| } | |
| if (xpc_partition_engaged(1UL << partid) || | |
| part->act_state != XPC_P_INACTIVE) { | |
| xpc_request_partition_disengage(part); | |
| xpc_mark_partition_disengaged(part); | |
| xpc_IPI_send_disengage(part); | |
| } | |
| } | |
| time = rtc_time(); | |
| printmsg_time = time + | |
| (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second); | |
| disengage_request_timeout = time + | |
| (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second); | |
| /* wait for all other partitions to disengage from us */ | |
| while (1) { | |
| engaged = xpc_partition_engaged(-1UL); | |
| if (!engaged) { | |
| dev_info(xpc_part, "all partitions have disengaged\n"); | |
| break; | |
| } | |
| time = rtc_time(); | |
| if (time >= disengage_request_timeout) { | |
| for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { | |
| if (engaged & (1UL << partid)) { | |
| dev_info(xpc_part, "disengage from " | |
| "remote partition %d timed " | |
| "out\n", partid); | |
| } | |
| } | |
| break; | |
| } | |
| if (time >= printmsg_time) { | |
| dev_info(xpc_part, "waiting for remote partitions to " | |
| "disengage, timeout in %ld seconds\n", | |
| (disengage_request_timeout - time) / | |
| sn_rtc_cycles_per_second); | |
| printmsg_time = time + | |
| (XPC_DISENGAGE_PRINTMSG_INTERVAL * | |
| sn_rtc_cycles_per_second); | |
| } | |
| } | |
| } | |
| /* | |
| * This function is called when the system is being restarted or halted due | |
| * to some sort of system failure. If this is the case we need to notify the | |
| * other partitions to disengage from all references to our memory. | |
| * This function can also be called when our heartbeater could be offlined | |
| * for a time. In this case we need to notify other partitions to not worry | |
| * about the lack of a heartbeat. | |
| */ | |
| static int | |
| xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) | |
| { | |
| switch (event) { | |
| case DIE_MACHINE_RESTART: | |
| case DIE_MACHINE_HALT: | |
| xpc_die_disengage(); | |
| break; | |
| case DIE_KDEBUG_ENTER: | |
| /* Should lack of heartbeat be ignored by other partitions? */ | |
| if (!xpc_kdebug_ignore) { | |
| break; | |
| } | |
| /* fall through */ | |
| case DIE_MCA_MONARCH_ENTER: | |
| case DIE_INIT_MONARCH_ENTER: | |
| xpc_vars->heartbeat++; | |
| xpc_vars->heartbeat_offline = 1; | |
| break; | |
| case DIE_KDEBUG_LEAVE: | |
| /* Is lack of heartbeat being ignored by other partitions? */ | |
| if (!xpc_kdebug_ignore) { | |
| break; | |
| } | |
| /* fall through */ | |
| case DIE_MCA_MONARCH_LEAVE: | |
| case DIE_INIT_MONARCH_LEAVE: | |
| xpc_vars->heartbeat++; | |
| xpc_vars->heartbeat_offline = 0; | |
| break; | |
| } | |
| return NOTIFY_DONE; | |
| } | |
| int __init | |
| xpc_init(void) | |
| { | |
| int ret; | |
| partid_t partid; | |
| struct xpc_partition *part; | |
| pid_t pid; | |
| size_t buf_size; | |
| if (!ia64_platform_is("sn2")) { | |
| return -ENODEV; | |
| } | |
| buf_size = max(XPC_RP_VARS_SIZE, | |
| XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES); | |
| xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size, | |
| GFP_KERNEL, &xpc_remote_copy_buffer_base); | |
| if (xpc_remote_copy_buffer == NULL) | |
| return -ENOMEM; | |
| snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); | |
| snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); | |
| xpc_sysctl = register_sysctl_table(xpc_sys_dir, 1); | |
| /* | |
| * The first few fields of each entry of xpc_partitions[] need to | |
| * be initialized now so that calls to xpc_connect() and | |
| * xpc_disconnect() can be made prior to the activation of any remote | |
| * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE | |
| * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING | |
| * PARTITION HAS BEEN ACTIVATED. | |
| */ | |
| for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { | |
| part = &xpc_partitions[partid]; | |
| DBUG_ON((u64) part != L1_CACHE_ALIGN((u64) part)); | |
| part->act_IRQ_rcvd = 0; | |
| spin_lock_init(&part->act_lock); | |
| part->act_state = XPC_P_INACTIVE; | |
| XPC_SET_REASON(part, 0, 0); | |
| init_timer(&part->disengage_request_timer); | |
| part->disengage_request_timer.function = | |
| xpc_timeout_partition_disengage_request; | |
| part->disengage_request_timer.data = (unsigned long) part; | |
| part->setup_state = XPC_P_UNSET; | |
| init_waitqueue_head(&part->teardown_wq); | |
| atomic_set(&part->references, 0); | |
| } | |
| /* | |
| * Open up protections for IPI operations (and AMO operations on | |
| * Shub 1.1 systems). | |
| */ | |
| xpc_allow_IPI_ops(); | |
| /* | |
| * Interrupts being processed will increment this atomic variable and | |
| * awaken the heartbeat thread which will process the interrupts. | |
| */ | |
| atomic_set(&xpc_act_IRQ_rcvd, 0); | |
| /* | |
| * This is safe to do before the xpc_hb_checker thread has started | |
| * because the handler releases a wait queue. If an interrupt is | |
| * received before the thread is waiting, it will not go to sleep, | |
| * but rather immediately process the interrupt. | |
| */ | |
| ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0, | |
| "xpc hb", NULL); | |
| if (ret != 0) { | |
| dev_err(xpc_part, "can't register ACTIVATE IRQ handler, " | |
| "errno=%d\n", -ret); | |
| xpc_restrict_IPI_ops(); | |
| if (xpc_sysctl) { | |
| unregister_sysctl_table(xpc_sysctl); | |
| } | |
| kfree(xpc_remote_copy_buffer_base); | |
| return -EBUSY; | |
| } | |
| /* | |
| * Fill the partition reserved page with the information needed by | |
| * other partitions to discover we are alive and establish initial | |
| * communications. | |
| */ | |
| xpc_rsvd_page = xpc_rsvd_page_init(); | |
| if (xpc_rsvd_page == NULL) { | |
| dev_err(xpc_part, "could not setup our reserved page\n"); | |
| free_irq(SGI_XPC_ACTIVATE, NULL); | |
| xpc_restrict_IPI_ops(); | |
| if (xpc_sysctl) { | |
| unregister_sysctl_table(xpc_sysctl); | |
| } | |
| kfree(xpc_remote_copy_buffer_base); | |
| return -EBUSY; | |
| } | |
| /* add ourselves to the reboot_notifier_list */ | |
| ret = register_reboot_notifier(&xpc_reboot_notifier); | |
| if (ret != 0) { | |
| dev_warn(xpc_part, "can't register reboot notifier\n"); | |
| } | |
| /* add ourselves to the die_notifier list (i.e., ia64die_chain) */ | |
| ret = register_die_notifier(&xpc_die_notifier); | |
| if (ret != 0) { | |
| dev_warn(xpc_part, "can't register die notifier\n"); | |
| } | |
| /* | |
| * Set the beating to other partitions into motion. This is | |
| * the last requirement for other partitions' discovery to | |
| * initiate communications with us. | |
| */ | |
| init_timer(&xpc_hb_timer); | |
| xpc_hb_timer.function = xpc_hb_beater; | |
| xpc_hb_beater(0); | |
| /* | |
| * The real work-horse behind xpc. This processes incoming | |
| * interrupts and monitors remote heartbeats. | |
| */ | |
| pid = kernel_thread(xpc_hb_checker, NULL, 0); | |
| if (pid < 0) { | |
| dev_err(xpc_part, "failed while forking hb check thread\n"); | |
| /* indicate to others that our reserved page is uninitialized */ | |
| xpc_rsvd_page->vars_pa = 0; | |
| /* take ourselves off of the reboot_notifier_list */ | |
| (void) unregister_reboot_notifier(&xpc_reboot_notifier); | |
| /* take ourselves off of the die_notifier list */ | |
| (void) unregister_die_notifier(&xpc_die_notifier); | |
| del_timer_sync(&xpc_hb_timer); | |
| free_irq(SGI_XPC_ACTIVATE, NULL); | |
| xpc_restrict_IPI_ops(); | |
| if (xpc_sysctl) { | |
| unregister_sysctl_table(xpc_sysctl); | |
| } | |
| kfree(xpc_remote_copy_buffer_base); | |
| return -EBUSY; | |
| } | |
| /* | |
| * Startup a thread that will attempt to discover other partitions to | |
| * activate based on info provided by SAL. This new thread is short | |
| * lived and will exit once discovery is complete. | |
| */ | |
| pid = kernel_thread(xpc_initiate_discovery, NULL, 0); | |
| if (pid < 0) { | |
| dev_err(xpc_part, "failed while forking discovery thread\n"); | |
| /* mark this new thread as a non-starter */ | |
| complete(&xpc_discovery_exited); | |
| xpc_do_exit(xpcUnloading); | |
| return -EBUSY; | |
| } | |
| /* set the interface to point at XPC's functions */ | |
| xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect, | |
| xpc_initiate_allocate, xpc_initiate_send, | |
| xpc_initiate_send_notify, xpc_initiate_received, | |
| xpc_initiate_partid_to_nasids); | |
| return 0; | |
| } | |
| module_init(xpc_init); | |
| void __exit | |
| xpc_exit(void) | |
| { | |
| xpc_do_exit(xpcUnloading); | |
| } | |
| module_exit(xpc_exit); | |
| MODULE_AUTHOR("Silicon Graphics, Inc."); | |
| MODULE_DESCRIPTION("Cross Partition Communication (XPC) support"); | |
| MODULE_LICENSE("GPL"); | |
| module_param(xpc_hb_interval, int, 0); | |
| MODULE_PARM_DESC(xpc_hb_interval, "Number of seconds between " | |
| "heartbeat increments."); | |
| module_param(xpc_hb_check_interval, int, 0); | |
| MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between " | |
| "heartbeat checks."); | |
| module_param(xpc_disengage_request_timelimit, int, 0); | |
| MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait " | |
| "for disengage request to complete."); | |
| module_param(xpc_kdebug_ignore, int, 0); | |
| MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by " | |
| "other partitions when dropping into kdebug."); | |