| /* | |
| * linux/arch/m32r/kernel/sys_m32r.c | |
| * | |
| * This file contains various random system calls that | |
| * have a non-standard calling sequence on the Linux/M32R platform. | |
| * | |
| * Taken from i386 version. | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/sched.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/smp_lock.h> | |
| #include <linux/sem.h> | |
| #include <linux/msg.h> | |
| #include <linux/shm.h> | |
| #include <linux/stat.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/mman.h> | |
| #include <linux/file.h> | |
| #include <linux/utsname.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/cachectl.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/ipc.h> | |
| #include <asm/syscall.h> | |
| #include <asm/unistd.h> | |
| /* | |
| * sys_tas() - test-and-set | |
| */ | |
| asmlinkage int sys_tas(int __user *addr) | |
| { | |
| int oldval; | |
| if (!access_ok(VERIFY_WRITE, addr, sizeof (int))) | |
| return -EFAULT; | |
| /* atomic operation: | |
| * oldval = *addr; *addr = 1; | |
| */ | |
| __asm__ __volatile__ ( | |
| DCACHE_CLEAR("%0", "r4", "%1") | |
| " .fillinsn\n" | |
| "1:\n" | |
| " lock %0, @%1 -> unlock %2, @%1\n" | |
| "2:\n" | |
| /* NOTE: | |
| * The m32r processor can accept interrupts only | |
| * at the 32-bit instruction boundary. | |
| * So, in the above code, the "unlock" instruction | |
| * can be executed continuously after the "lock" | |
| * instruction execution without any interruptions. | |
| */ | |
| ".section .fixup,\"ax\"\n" | |
| " .balign 4\n" | |
| "3: ldi %0, #%3\n" | |
| " seth r14, #high(2b)\n" | |
| " or3 r14, r14, #low(2b)\n" | |
| " jmp r14\n" | |
| ".previous\n" | |
| ".section __ex_table,\"a\"\n" | |
| " .balign 4\n" | |
| " .long 1b,3b\n" | |
| ".previous\n" | |
| : "=&r" (oldval) | |
| : "r" (addr), "r" (1), "i"(-EFAULT) | |
| : "r14", "memory" | |
| #ifdef CONFIG_CHIP_M32700_TS1 | |
| , "r4" | |
| #endif /* CONFIG_CHIP_M32700_TS1 */ | |
| ); | |
| return oldval; | |
| } | |
| /* | |
| * sys_pipe() is the normal C calling standard for creating | |
| * a pipe. It's not the way Unix traditionally does this, though. | |
| */ | |
| asmlinkage int | |
| sys_pipe(unsigned long r0, unsigned long r1, unsigned long r2, | |
| unsigned long r3, unsigned long r4, unsigned long r5, | |
| unsigned long r6, struct pt_regs regs) | |
| { | |
| int fd[2]; | |
| int error; | |
| error = do_pipe(fd); | |
| if (!error) { | |
| if (copy_to_user((void __user *)r0, fd, 2*sizeof(int))) | |
| error = -EFAULT; | |
| } | |
| return error; | |
| } | |
| asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, | |
| unsigned long prot, unsigned long flags, | |
| unsigned long fd, unsigned long pgoff) | |
| { | |
| int error = -EBADF; | |
| struct file *file = NULL; | |
| flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); | |
| if (!(flags & MAP_ANONYMOUS)) { | |
| file = fget(fd); | |
| if (!file) | |
| goto out; | |
| } | |
| down_write(¤t->mm->mmap_sem); | |
| error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); | |
| up_write(¤t->mm->mmap_sem); | |
| if (file) | |
| fput(file); | |
| out: | |
| return error; | |
| } | |
| /* | |
| * sys_ipc() is the de-multiplexer for the SysV IPC calls.. | |
| * | |
| * This is really horribly ugly. | |
| */ | |
| asmlinkage int sys_ipc(uint call, int first, int second, | |
| int third, void __user *ptr, long fifth) | |
| { | |
| int version, ret; | |
| version = call >> 16; /* hack for backward compatibility */ | |
| call &= 0xffff; | |
| switch (call) { | |
| case SEMOP: | |
| return sys_semtimedop(first, (struct sembuf __user *)ptr, | |
| second, NULL); | |
| case SEMTIMEDOP: | |
| return sys_semtimedop(first, (struct sembuf __user *)ptr, | |
| second, (const struct timespec __user *)fifth); | |
| case SEMGET: | |
| return sys_semget (first, second, third); | |
| case SEMCTL: { | |
| union semun fourth; | |
| if (!ptr) | |
| return -EINVAL; | |
| if (get_user(fourth.__pad, (void __user * __user *) ptr)) | |
| return -EFAULT; | |
| return sys_semctl (first, second, third, fourth); | |
| } | |
| case MSGSND: | |
| return sys_msgsnd (first, (struct msgbuf __user *) ptr, | |
| second, third); | |
| case MSGRCV: | |
| switch (version) { | |
| case 0: { | |
| struct ipc_kludge tmp; | |
| if (!ptr) | |
| return -EINVAL; | |
| if (copy_from_user(&tmp, | |
| (struct ipc_kludge __user *) ptr, | |
| sizeof (tmp))) | |
| return -EFAULT; | |
| return sys_msgrcv (first, tmp.msgp, second, | |
| tmp.msgtyp, third); | |
| } | |
| default: | |
| return sys_msgrcv (first, | |
| (struct msgbuf __user *) ptr, | |
| second, fifth, third); | |
| } | |
| case MSGGET: | |
| return sys_msgget ((key_t) first, second); | |
| case MSGCTL: | |
| return sys_msgctl (first, second, | |
| (struct msqid_ds __user *) ptr); | |
| case SHMAT: { | |
| ulong raddr; | |
| if (!access_ok(VERIFY_WRITE, (ulong __user *) third, | |
| sizeof(ulong))) | |
| return -EFAULT; | |
| ret = do_shmat (first, (char __user *) ptr, second, &raddr); | |
| if (ret) | |
| return ret; | |
| return put_user (raddr, (ulong __user *) third); | |
| } | |
| case SHMDT: | |
| return sys_shmdt ((char __user *)ptr); | |
| case SHMGET: | |
| return sys_shmget (first, second, third); | |
| case SHMCTL: | |
| return sys_shmctl (first, second, | |
| (struct shmid_ds __user *) ptr); | |
| default: | |
| return -ENOSYS; | |
| } | |
| } | |
| asmlinkage int sys_uname(struct old_utsname __user * name) | |
| { | |
| int err; | |
| if (!name) | |
| return -EFAULT; | |
| down_read(&uts_sem); | |
| err = copy_to_user(name, utsname(), sizeof (*name)); | |
| up_read(&uts_sem); | |
| return err?-EFAULT:0; | |
| } | |
| asmlinkage int sys_cacheflush(void *addr, int bytes, int cache) | |
| { | |
| /* This should flush more selectivly ... */ | |
| _flush_cache_all(); | |
| return 0; | |
| } | |
| asmlinkage int sys_cachectl(char *addr, int nbytes, int op) | |
| { | |
| /* Not implemented yet. */ | |
| return -ENOSYS; | |
| } | |
| /* | |
| * Do a system call from kernel instead of calling sys_execve so we | |
| * end up with proper pt_regs. | |
| */ | |
| int kernel_execve(const char *filename, char *const argv[], char *const envp[]) | |
| { | |
| register long __scno __asm__ ("r7") = __NR_execve; | |
| register long __arg3 __asm__ ("r2") = (long)(envp); | |
| register long __arg2 __asm__ ("r1") = (long)(argv); | |
| register long __res __asm__ ("r0") = (long)(filename); | |
| __asm__ __volatile__ ( | |
| "trap #" SYSCALL_VECTOR "|| nop" | |
| : "=r" (__res) | |
| : "r" (__scno), "0" (__res), "r" (__arg2), | |
| "r" (__arg3) | |
| : "memory"); | |
| return __res; | |
| } |