| /* | |
| * linux/arch/m68k/mm/fault.c | |
| * | |
| * Copyright (C) 1995 Hamish Macdonald | |
| */ | |
| #include <linux/mman.h> | |
| #include <linux/mm.h> | |
| #include <linux/kernel.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/module.h> | |
| #include <asm/setup.h> | |
| #include <asm/traps.h> | |
| #include <asm/system.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/pgalloc.h> | |
| extern void die_if_kernel(char *, struct pt_regs *, long); | |
| extern const int frame_extra_sizes[]; /* in m68k/kernel/signal.c */ | |
| int send_fault_sig(struct pt_regs *regs) | |
| { | |
| siginfo_t siginfo = { 0, 0, 0, }; | |
| siginfo.si_signo = current->thread.signo; | |
| siginfo.si_code = current->thread.code; | |
| siginfo.si_addr = (void *)current->thread.faddr; | |
| #ifdef DEBUG | |
| printk("send_fault_sig: %p,%d,%d\n", siginfo.si_addr, siginfo.si_signo, siginfo.si_code); | |
| #endif | |
| if (user_mode(regs)) { | |
| force_sig_info(siginfo.si_signo, | |
| &siginfo, current); | |
| } else { | |
| const struct exception_table_entry *fixup; | |
| /* Are we prepared to handle this kernel fault? */ | |
| if ((fixup = search_exception_tables(regs->pc))) { | |
| struct pt_regs *tregs; | |
| /* Create a new four word stack frame, discarding the old | |
| one. */ | |
| regs->stkadj = frame_extra_sizes[regs->format]; | |
| tregs = (struct pt_regs *)((ulong)regs + regs->stkadj); | |
| tregs->vector = regs->vector; | |
| tregs->format = 0; | |
| tregs->pc = fixup->fixup; | |
| tregs->sr = regs->sr; | |
| return -1; | |
| } | |
| //if (siginfo.si_signo == SIGBUS) | |
| // force_sig_info(siginfo.si_signo, | |
| // &siginfo, current); | |
| /* | |
| * Oops. The kernel tried to access some bad page. We'll have to | |
| * terminate things with extreme prejudice. | |
| */ | |
| if ((unsigned long)siginfo.si_addr < PAGE_SIZE) | |
| printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); | |
| else | |
| printk(KERN_ALERT "Unable to handle kernel access"); | |
| printk(" at virtual address %p\n", siginfo.si_addr); | |
| die_if_kernel("Oops", regs, 0 /*error_code*/); | |
| do_exit(SIGKILL); | |
| } | |
| return 1; | |
| } | |
| /* | |
| * This routine handles page faults. It determines the problem, and | |
| * then passes it off to one of the appropriate routines. | |
| * | |
| * error_code: | |
| * bit 0 == 0 means no page found, 1 means protection fault | |
| * bit 1 == 0 means read, 1 means write | |
| * | |
| * If this routine detects a bad access, it returns 1, otherwise it | |
| * returns 0. | |
| */ | |
| int do_page_fault(struct pt_regs *regs, unsigned long address, | |
| unsigned long error_code) | |
| { | |
| struct mm_struct *mm = current->mm; | |
| struct vm_area_struct * vma; | |
| int write, fault; | |
| #ifdef DEBUG | |
| printk ("do page fault:\nregs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld, %p\n", | |
| regs->sr, regs->pc, address, error_code, | |
| current->mm->pgd); | |
| #endif | |
| /* | |
| * If we're in an interrupt or have no user | |
| * context, we must not take the fault.. | |
| */ | |
| if (in_interrupt() || !mm) | |
| goto no_context; | |
| down_read(&mm->mmap_sem); | |
| vma = find_vma(mm, address); | |
| if (!vma) | |
| goto map_err; | |
| if (vma->vm_flags & VM_IO) | |
| goto acc_err; | |
| if (vma->vm_start <= address) | |
| goto good_area; | |
| if (!(vma->vm_flags & VM_GROWSDOWN)) | |
| goto map_err; | |
| if (user_mode(regs)) { | |
| /* Accessing the stack below usp is always a bug. The | |
| "+ 256" is there due to some instructions doing | |
| pre-decrement on the stack and that doesn't show up | |
| until later. */ | |
| if (address + 256 < rdusp()) | |
| goto map_err; | |
| } | |
| if (expand_stack(vma, address)) | |
| goto map_err; | |
| /* | |
| * Ok, we have a good vm_area for this memory access, so | |
| * we can handle it.. | |
| */ | |
| good_area: | |
| #ifdef DEBUG | |
| printk("do_page_fault: good_area\n"); | |
| #endif | |
| write = 0; | |
| switch (error_code & 3) { | |
| default: /* 3: write, present */ | |
| /* fall through */ | |
| case 2: /* write, not present */ | |
| if (!(vma->vm_flags & VM_WRITE)) | |
| goto acc_err; | |
| write++; | |
| break; | |
| case 1: /* read, present */ | |
| goto acc_err; | |
| case 0: /* read, not present */ | |
| if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) | |
| goto acc_err; | |
| } | |
| /* | |
| * If for any reason at all we couldn't handle the fault, | |
| * make sure we exit gracefully rather than endlessly redo | |
| * the fault. | |
| */ | |
| survive: | |
| fault = handle_mm_fault(mm, vma, address, write); | |
| #ifdef DEBUG | |
| printk("handle_mm_fault returns %d\n",fault); | |
| #endif | |
| switch (fault) { | |
| case VM_FAULT_MINOR: | |
| current->min_flt++; | |
| break; | |
| case VM_FAULT_MAJOR: | |
| current->maj_flt++; | |
| break; | |
| case VM_FAULT_SIGBUS: | |
| goto bus_err; | |
| default: | |
| goto out_of_memory; | |
| } | |
| up_read(&mm->mmap_sem); | |
| return 0; | |
| /* | |
| * We ran out of memory, or some other thing happened to us that made | |
| * us unable to handle the page fault gracefully. | |
| */ | |
| out_of_memory: | |
| up_read(&mm->mmap_sem); | |
| if (is_init(current)) { | |
| yield(); | |
| down_read(&mm->mmap_sem); | |
| goto survive; | |
| } | |
| printk("VM: killing process %s\n", current->comm); | |
| if (user_mode(regs)) | |
| do_exit(SIGKILL); | |
| no_context: | |
| current->thread.signo = SIGBUS; | |
| current->thread.faddr = address; | |
| return send_fault_sig(regs); | |
| bus_err: | |
| current->thread.signo = SIGBUS; | |
| current->thread.code = BUS_ADRERR; | |
| current->thread.faddr = address; | |
| goto send_sig; | |
| map_err: | |
| current->thread.signo = SIGSEGV; | |
| current->thread.code = SEGV_MAPERR; | |
| current->thread.faddr = address; | |
| goto send_sig; | |
| acc_err: | |
| current->thread.signo = SIGSEGV; | |
| current->thread.code = SEGV_ACCERR; | |
| current->thread.faddr = address; | |
| send_sig: | |
| up_read(&mm->mmap_sem); | |
| return send_fault_sig(regs); | |
| } |