| /* | |
| * | |
| * Copyright (C) 2001 MontaVista Software, ppopov@mvista.com | |
| * Copied and modified Carsten Langgaard's time.c | |
| * | |
| * Carsten Langgaard, carstenl@mips.com | |
| * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. | |
| * | |
| * ######################################################################## | |
| * | |
| * This program is free software; you can distribute it and/or modify it | |
| * under the terms of the GNU General Public License (Version 2) as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| * for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. | |
| * | |
| * ######################################################################## | |
| * | |
| * Setting up the clock on the MIPS boards. | |
| * | |
| * Update. Always configure the kernel with CONFIG_NEW_TIME_C. This | |
| * will use the user interface gettimeofday() functions from the | |
| * arch/mips/kernel/time.c, and we provide the clock interrupt processing | |
| * and the timer offset compute functions. If CONFIG_PM is selected, | |
| * we also ensure the 32KHz timer is available. -- Dan | |
| */ | |
| #include <linux/types.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/sched.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/hardirq.h> | |
| #include <asm/compiler.h> | |
| #include <asm/mipsregs.h> | |
| #include <asm/time.h> | |
| #include <asm/div64.h> | |
| #include <asm/mach-au1x00/au1000.h> | |
| #include <linux/mc146818rtc.h> | |
| #include <linux/timex.h> | |
| static unsigned long r4k_offset; /* Amount to increment compare reg each time */ | |
| static unsigned long r4k_cur; /* What counter should be at next timer irq */ | |
| int no_au1xxx_32khz; | |
| extern int allow_au1k_wait; /* default off for CP0 Counter */ | |
| #ifdef CONFIG_PM | |
| #if HZ < 100 || HZ > 1000 | |
| #error "unsupported HZ value! Must be in [100,1000]" | |
| #endif | |
| #define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */ | |
| extern void startup_match20_interrupt(irq_handler_t handler); | |
| static unsigned long last_pc0, last_match20; | |
| #endif | |
| static DEFINE_SPINLOCK(time_lock); | |
| static inline void ack_r4ktimer(unsigned long newval) | |
| { | |
| write_c0_compare(newval); | |
| } | |
| /* | |
| * There are a lot of conceptually broken versions of the MIPS timer interrupt | |
| * handler floating around. This one is rather different, but the algorithm | |
| * is provably more robust. | |
| */ | |
| unsigned long wtimer; | |
| void mips_timer_interrupt(void) | |
| { | |
| int irq = 63; | |
| irq_enter(); | |
| kstat_this_cpu.irqs[irq]++; | |
| if (r4k_offset == 0) | |
| goto null; | |
| do { | |
| kstat_this_cpu.irqs[irq]++; | |
| do_timer(1); | |
| #ifndef CONFIG_SMP | |
| update_process_times(user_mode(get_irq_regs())); | |
| #endif | |
| r4k_cur += r4k_offset; | |
| ack_r4ktimer(r4k_cur); | |
| } while (((unsigned long)read_c0_count() | |
| - r4k_cur) < 0x7fffffff); | |
| irq_exit(); | |
| return; | |
| null: | |
| ack_r4ktimer(0); | |
| irq_exit(); | |
| } | |
| #ifdef CONFIG_PM | |
| irqreturn_t counter0_irq(int irq, void *dev_id) | |
| { | |
| unsigned long pc0; | |
| int time_elapsed; | |
| static int jiffie_drift = 0; | |
| if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) { | |
| /* should never happen! */ | |
| printk(KERN_WARNING "counter 0 w status error\n"); | |
| return IRQ_NONE; | |
| } | |
| pc0 = au_readl(SYS_TOYREAD); | |
| if (pc0 < last_match20) { | |
| /* counter overflowed */ | |
| time_elapsed = (0xffffffff - last_match20) + pc0; | |
| } | |
| else { | |
| time_elapsed = pc0 - last_match20; | |
| } | |
| while (time_elapsed > 0) { | |
| do_timer(1); | |
| #ifndef CONFIG_SMP | |
| update_process_times(user_mode(get_irq_regs())); | |
| #endif | |
| time_elapsed -= MATCH20_INC; | |
| last_match20 += MATCH20_INC; | |
| jiffie_drift++; | |
| } | |
| last_pc0 = pc0; | |
| au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); | |
| au_sync(); | |
| /* our counter ticks at 10.009765625 ms/tick, we we're running | |
| * almost 10uS too slow per tick. | |
| */ | |
| if (jiffie_drift >= 999) { | |
| jiffie_drift -= 999; | |
| do_timer(1); /* increment jiffies by one */ | |
| #ifndef CONFIG_SMP | |
| update_process_times(user_mode(get_irq_regs())); | |
| #endif | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| /* When we wakeup from sleep, we have to "catch up" on all of the | |
| * timer ticks we have missed. | |
| */ | |
| void | |
| wakeup_counter0_adjust(void) | |
| { | |
| unsigned long pc0; | |
| int time_elapsed; | |
| pc0 = au_readl(SYS_TOYREAD); | |
| if (pc0 < last_match20) { | |
| /* counter overflowed */ | |
| time_elapsed = (0xffffffff - last_match20) + pc0; | |
| } | |
| else { | |
| time_elapsed = pc0 - last_match20; | |
| } | |
| while (time_elapsed > 0) { | |
| time_elapsed -= MATCH20_INC; | |
| last_match20 += MATCH20_INC; | |
| } | |
| last_pc0 = pc0; | |
| au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); | |
| au_sync(); | |
| } | |
| /* This is just for debugging to set the timer for a sleep delay. | |
| */ | |
| void | |
| wakeup_counter0_set(int ticks) | |
| { | |
| unsigned long pc0; | |
| pc0 = au_readl(SYS_TOYREAD); | |
| last_pc0 = pc0; | |
| au_writel(last_match20 + (MATCH20_INC * ticks), SYS_TOYMATCH2); | |
| au_sync(); | |
| } | |
| #endif | |
| /* I haven't found anyone that doesn't use a 12 MHz source clock, | |
| * but just in case..... | |
| */ | |
| #ifdef CONFIG_AU1000_SRC_CLK | |
| #define AU1000_SRC_CLK CONFIG_AU1000_SRC_CLK | |
| #else | |
| #define AU1000_SRC_CLK 12000000 | |
| #endif | |
| /* | |
| * We read the real processor speed from the PLL. This is important | |
| * because it is more accurate than computing it from the 32KHz | |
| * counter, if it exists. If we don't have an accurate processor | |
| * speed, all of the peripherals that derive their clocks based on | |
| * this advertised speed will introduce error and sometimes not work | |
| * properly. This function is futher convoluted to still allow configurations | |
| * to do that in case they have really, really old silicon with a | |
| * write-only PLL register, that we need the 32KHz when power management | |
| * "wait" is enabled, and we need to detect if the 32KHz isn't present | |
| * but requested......got it? :-) -- Dan | |
| */ | |
| unsigned long cal_r4koff(void) | |
| { | |
| unsigned long cpu_speed; | |
| unsigned long flags; | |
| unsigned long counter; | |
| spin_lock_irqsave(&time_lock, flags); | |
| /* Power management cares if we don't have a 32KHz counter. | |
| */ | |
| no_au1xxx_32khz = 0; | |
| counter = au_readl(SYS_COUNTER_CNTRL); | |
| if (counter & SYS_CNTRL_E0) { | |
| int trim_divide = 16; | |
| au_writel(counter | SYS_CNTRL_EN1, SYS_COUNTER_CNTRL); | |
| while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S); | |
| /* RTC now ticks at 32.768/16 kHz */ | |
| au_writel(trim_divide-1, SYS_RTCTRIM); | |
| while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S); | |
| while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); | |
| au_writel (0, SYS_TOYWRITE); | |
| while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S); | |
| #if defined(CONFIG_AU1000_USE32K) | |
| { | |
| unsigned long start, end, count; | |
| start = au_readl(SYS_RTCREAD); | |
| start += 2; | |
| /* wait for the beginning of a new tick | |
| */ | |
| while (au_readl(SYS_RTCREAD) < start); | |
| /* Start r4k counter. | |
| */ | |
| write_c0_count(0); | |
| /* Wait 0.5 seconds. | |
| */ | |
| end = start + (32768 / trim_divide)/2; | |
| while (end > au_readl(SYS_RTCREAD)); | |
| count = read_c0_count(); | |
| cpu_speed = count * 2; | |
| } | |
| #else | |
| cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * | |
| AU1000_SRC_CLK; | |
| #endif | |
| } | |
| else { | |
| /* The 32KHz oscillator isn't running, so assume there | |
| * isn't one and grab the processor speed from the PLL. | |
| * NOTE: some old silicon doesn't allow reading the PLL. | |
| */ | |
| cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; | |
| no_au1xxx_32khz = 1; | |
| } | |
| mips_hpt_frequency = cpu_speed; | |
| // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) | |
| set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16)); | |
| spin_unlock_irqrestore(&time_lock, flags); | |
| return (cpu_speed / HZ); | |
| } | |
| void __init plat_timer_setup(struct irqaction *irq) | |
| { | |
| unsigned int est_freq; | |
| printk("calculating r4koff... "); | |
| r4k_offset = cal_r4koff(); | |
| printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); | |
| //est_freq = 2*r4k_offset*HZ; | |
| est_freq = r4k_offset*HZ; | |
| est_freq += 5000; /* round */ | |
| est_freq -= est_freq%10000; | |
| printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, | |
| (est_freq%1000000)*100/1000000); | |
| set_au1x00_speed(est_freq); | |
| set_au1x00_lcd_clock(); // program the LCD clock | |
| r4k_cur = (read_c0_count() + r4k_offset); | |
| write_c0_compare(r4k_cur); | |
| #ifdef CONFIG_PM | |
| /* | |
| * setup counter 0, since it keeps ticking after a | |
| * 'wait' instruction has been executed. The CP0 timer and | |
| * counter 1 do NOT continue running after 'wait' | |
| * | |
| * It's too early to call request_irq() here, so we handle | |
| * counter 0 interrupt as a special irq and it doesn't show | |
| * up under /proc/interrupts. | |
| * | |
| * Check to ensure we really have a 32KHz oscillator before | |
| * we do this. | |
| */ | |
| if (no_au1xxx_32khz) { | |
| unsigned int c0_status; | |
| printk("WARNING: no 32KHz clock found.\n"); | |
| /* Ensure we get CPO_COUNTER interrupts. | |
| */ | |
| c0_status = read_c0_status(); | |
| c0_status |= IE_IRQ5; | |
| write_c0_status(c0_status); | |
| } | |
| else { | |
| while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); | |
| au_writel(0, SYS_TOYWRITE); | |
| while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); | |
| au_writel(au_readl(SYS_WAKEMSK) | (1<<8), SYS_WAKEMSK); | |
| au_writel(~0, SYS_WAKESRC); | |
| au_sync(); | |
| while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); | |
| /* setup match20 to interrupt once every HZ */ | |
| last_pc0 = last_match20 = au_readl(SYS_TOYREAD); | |
| au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); | |
| au_sync(); | |
| while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); | |
| startup_match20_interrupt(counter0_irq); | |
| /* We can use the real 'wait' instruction. | |
| */ | |
| allow_au1k_wait = 1; | |
| } | |
| #endif | |
| } | |
| void __init au1xxx_time_init(void) | |
| { | |
| } |