| /* | |
| * This program is free software; you can distribute it and/or modify it | |
| * under the terms of the GNU General Public License (Version 2) as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| * for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. | |
| * | |
| * Copyright (C) 2004, 05, 06 MIPS Technologies, Inc. | |
| * Elizabeth Clarke (beth@mips.com) | |
| * Ralf Baechle (ralf@linux-mips.org) | |
| * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/compiler.h> | |
| #include <asm/atomic.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/cpu.h> | |
| #include <asm/processor.h> | |
| #include <asm/system.h> | |
| #include <asm/hardirq.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/smp.h> | |
| #include <asm/time.h> | |
| #include <asm/mipsregs.h> | |
| #include <asm/mipsmtregs.h> | |
| #include <asm/mips_mt.h> | |
| #include <asm/mips-boards/maltaint.h> /* This is f*cking wrong */ | |
| #define MIPS_CPU_IPI_RESCHED_IRQ 0 | |
| #define MIPS_CPU_IPI_CALL_IRQ 1 | |
| static int cpu_ipi_resched_irq, cpu_ipi_call_irq; | |
| #if 0 | |
| static void dump_mtregisters(int vpe, int tc) | |
| { | |
| printk("vpe %d tc %d\n", vpe, tc); | |
| settc(tc); | |
| printk(" c0 status 0x%lx\n", read_vpe_c0_status()); | |
| printk(" vpecontrol 0x%lx\n", read_vpe_c0_vpecontrol()); | |
| printk(" vpeconf0 0x%lx\n", read_vpe_c0_vpeconf0()); | |
| printk(" tcstatus 0x%lx\n", read_tc_c0_tcstatus()); | |
| printk(" tcrestart 0x%lx\n", read_tc_c0_tcrestart()); | |
| printk(" tcbind 0x%lx\n", read_tc_c0_tcbind()); | |
| printk(" tchalt 0x%lx\n", read_tc_c0_tchalt()); | |
| } | |
| #endif | |
| void __init sanitize_tlb_entries(void) | |
| { | |
| int i, tlbsiz; | |
| unsigned long mvpconf0, ncpu; | |
| if (!cpu_has_mipsmt) | |
| return; | |
| /* Enable VPC */ | |
| set_c0_mvpcontrol(MVPCONTROL_VPC); | |
| back_to_back_c0_hazard(); | |
| /* Disable TLB sharing */ | |
| clear_c0_mvpcontrol(MVPCONTROL_STLB); | |
| mvpconf0 = read_c0_mvpconf0(); | |
| printk(KERN_INFO "MVPConf0 0x%lx TLBS %lx PTLBE %ld\n", mvpconf0, | |
| (mvpconf0 & MVPCONF0_TLBS) >> MVPCONF0_TLBS_SHIFT, | |
| (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT); | |
| tlbsiz = (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT; | |
| ncpu = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; | |
| printk(" tlbsiz %d ncpu %ld\n", tlbsiz, ncpu); | |
| if (tlbsiz > 0) { | |
| /* share them out across the vpe's */ | |
| tlbsiz /= ncpu; | |
| printk(KERN_INFO "setting Config1.MMU_size to %d\n", tlbsiz); | |
| for (i = 0; i < ncpu; i++) { | |
| settc(i); | |
| if (i == 0) | |
| write_c0_config1((read_c0_config1() & ~(0x3f << 25)) | (tlbsiz << 25)); | |
| else | |
| write_vpe_c0_config1((read_vpe_c0_config1() & ~(0x3f << 25)) | | |
| (tlbsiz << 25)); | |
| } | |
| } | |
| clear_c0_mvpcontrol(MVPCONTROL_VPC); | |
| } | |
| static void ipi_resched_dispatch(void) | |
| { | |
| do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ); | |
| } | |
| static void ipi_call_dispatch(void) | |
| { | |
| do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ); | |
| } | |
| static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) | |
| { | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) | |
| { | |
| smp_call_function_interrupt(); | |
| return IRQ_HANDLED; | |
| } | |
| static struct irqaction irq_resched = { | |
| .handler = ipi_resched_interrupt, | |
| .flags = IRQF_DISABLED, | |
| .name = "IPI_resched" | |
| }; | |
| static struct irqaction irq_call = { | |
| .handler = ipi_call_interrupt, | |
| .flags = IRQF_DISABLED, | |
| .name = "IPI_call" | |
| }; | |
| static void __init smp_copy_vpe_config(void) | |
| { | |
| write_vpe_c0_status( | |
| (read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); | |
| /* set config to be the same as vpe0, particularly kseg0 coherency alg */ | |
| write_vpe_c0_config( read_c0_config()); | |
| /* make sure there are no software interrupts pending */ | |
| write_vpe_c0_cause(0); | |
| /* Propagate Config7 */ | |
| write_vpe_c0_config7(read_c0_config7()); | |
| write_vpe_c0_count(read_c0_count()); | |
| } | |
| static unsigned int __init smp_vpe_init(unsigned int tc, unsigned int mvpconf0, | |
| unsigned int ncpu) | |
| { | |
| if (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) | |
| return ncpu; | |
| /* Deactivate all but VPE 0 */ | |
| if (tc != 0) { | |
| unsigned long tmp = read_vpe_c0_vpeconf0(); | |
| tmp &= ~VPECONF0_VPA; | |
| /* master VPE */ | |
| tmp |= VPECONF0_MVP; | |
| write_vpe_c0_vpeconf0(tmp); | |
| /* Record this as available CPU */ | |
| cpu_set(tc, phys_cpu_present_map); | |
| __cpu_number_map[tc] = ++ncpu; | |
| __cpu_logical_map[ncpu] = tc; | |
| } | |
| /* Disable multi-threading with TC's */ | |
| write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); | |
| if (tc != 0) | |
| smp_copy_vpe_config(); | |
| return ncpu; | |
| } | |
| static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0) | |
| { | |
| unsigned long tmp; | |
| if (!tc) | |
| return; | |
| /* bind a TC to each VPE, May as well put all excess TC's | |
| on the last VPE */ | |
| if (tc >= (((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1)) | |
| write_tc_c0_tcbind(read_tc_c0_tcbind() | ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)); | |
| else { | |
| write_tc_c0_tcbind(read_tc_c0_tcbind() | tc); | |
| /* and set XTC */ | |
| write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (tc << VPECONF0_XTC_SHIFT)); | |
| } | |
| tmp = read_tc_c0_tcstatus(); | |
| /* mark not allocated and not dynamically allocatable */ | |
| tmp &= ~(TCSTATUS_A | TCSTATUS_DA); | |
| tmp |= TCSTATUS_IXMT; /* interrupt exempt */ | |
| write_tc_c0_tcstatus(tmp); | |
| write_tc_c0_tchalt(TCHALT_H); | |
| } | |
| /* | |
| * Common setup before any secondaries are started | |
| * Make sure all CPU's are in a sensible state before we boot any of the | |
| * secondarys | |
| */ | |
| void __init plat_smp_setup(void) | |
| { | |
| unsigned int mvpconf0, ntc, tc, ncpu = 0; | |
| #ifdef CONFIG_MIPS_MT_FPAFF | |
| /* If we have an FPU, enroll ourselves in the FPU-full mask */ | |
| if (cpu_has_fpu) | |
| cpu_set(0, mt_fpu_cpumask); | |
| #endif /* CONFIG_MIPS_MT_FPAFF */ | |
| if (!cpu_has_mipsmt) | |
| return; | |
| /* disable MT so we can configure */ | |
| dvpe(); | |
| dmt(); | |
| mips_mt_set_cpuoptions(); | |
| /* Put MVPE's into 'configuration state' */ | |
| set_c0_mvpcontrol(MVPCONTROL_VPC); | |
| mvpconf0 = read_c0_mvpconf0(); | |
| ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT; | |
| /* we'll always have more TC's than VPE's, so loop setting everything | |
| to a sensible state */ | |
| for (tc = 0; tc <= ntc; tc++) { | |
| settc(tc); | |
| smp_tc_init(tc, mvpconf0); | |
| ncpu = smp_vpe_init(tc, mvpconf0, ncpu); | |
| } | |
| /* Release config state */ | |
| clear_c0_mvpcontrol(MVPCONTROL_VPC); | |
| /* We'll wait until starting the secondaries before starting MVPE */ | |
| printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu); | |
| } | |
| void __init plat_prepare_cpus(unsigned int max_cpus) | |
| { | |
| /* set up ipi interrupts */ | |
| if (cpu_has_vint) { | |
| set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); | |
| set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); | |
| } | |
| cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ; | |
| cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ; | |
| setup_irq(cpu_ipi_resched_irq, &irq_resched); | |
| setup_irq(cpu_ipi_call_irq, &irq_call); | |
| /* need to mark IPI's as IRQ_PER_CPU */ | |
| irq_desc[cpu_ipi_resched_irq].status |= IRQ_PER_CPU; | |
| irq_desc[cpu_ipi_call_irq].status |= IRQ_PER_CPU; | |
| } | |
| /* | |
| * Setup the PC, SP, and GP of a secondary processor and start it | |
| * running! | |
| * smp_bootstrap is the place to resume from | |
| * __KSTK_TOS(idle) is apparently the stack pointer | |
| * (unsigned long)idle->thread_info the gp | |
| * assumes a 1:1 mapping of TC => VPE | |
| */ | |
| void prom_boot_secondary(int cpu, struct task_struct *idle) | |
| { | |
| struct thread_info *gp = task_thread_info(idle); | |
| dvpe(); | |
| set_c0_mvpcontrol(MVPCONTROL_VPC); | |
| settc(cpu); | |
| /* restart */ | |
| write_tc_c0_tcrestart((unsigned long)&smp_bootstrap); | |
| /* enable the tc this vpe/cpu will be running */ | |
| write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A); | |
| write_tc_c0_tchalt(0); | |
| /* enable the VPE */ | |
| write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); | |
| /* stack pointer */ | |
| write_tc_gpr_sp( __KSTK_TOS(idle)); | |
| /* global pointer */ | |
| write_tc_gpr_gp((unsigned long)gp); | |
| flush_icache_range((unsigned long)gp, | |
| (unsigned long)(gp + sizeof(struct thread_info))); | |
| /* finally out of configuration and into chaos */ | |
| clear_c0_mvpcontrol(MVPCONTROL_VPC); | |
| evpe(EVPE_ENABLE); | |
| } | |
| void prom_init_secondary(void) | |
| { | |
| write_c0_status((read_c0_status() & ~ST0_IM ) | | |
| (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7)); | |
| } | |
| void prom_smp_finish(void) | |
| { | |
| write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); | |
| #ifdef CONFIG_MIPS_MT_FPAFF | |
| /* If we have an FPU, enroll ourselves in the FPU-full mask */ | |
| if (cpu_has_fpu) | |
| cpu_set(smp_processor_id(), mt_fpu_cpumask); | |
| #endif /* CONFIG_MIPS_MT_FPAFF */ | |
| local_irq_enable(); | |
| } | |
| void prom_cpus_done(void) | |
| { | |
| } | |
| void core_send_ipi(int cpu, unsigned int action) | |
| { | |
| int i; | |
| unsigned long flags; | |
| int vpflags; | |
| local_irq_save (flags); | |
| vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */ | |
| switch (action) { | |
| case SMP_CALL_FUNCTION: | |
| i = C_SW1; | |
| break; | |
| case SMP_RESCHEDULE_YOURSELF: | |
| default: | |
| i = C_SW0; | |
| break; | |
| } | |
| /* 1:1 mapping of vpe and tc... */ | |
| settc(cpu); | |
| write_vpe_c0_cause(read_vpe_c0_cause() | i); | |
| evpe(vpflags); | |
| local_irq_restore(flags); | |
| } |