| /* | |
| * PROM interface routines. | |
| */ | |
| #include <linux/types.h> | |
| #include <linux/init.h> | |
| #include <linux/string.h> | |
| #include <linux/ctype.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/ioport.h> | |
| #include <asm/bootinfo.h> | |
| #include <asm/lasat/lasat.h> | |
| #include <asm/cpu.h> | |
| #include "at93c.h" | |
| #include <asm/lasat/eeprom.h> | |
| #include "prom.h" | |
| #define RESET_VECTOR 0xbfc00000 | |
| #define PROM_JUMP_TABLE_ENTRY(n) (*((u32 *)(RESET_VECTOR + 0x20) + n)) | |
| #define PROM_DISPLAY_ADDR PROM_JUMP_TABLE_ENTRY(0) | |
| #define PROM_PUTC_ADDR PROM_JUMP_TABLE_ENTRY(1) | |
| #define PROM_MONITOR_ADDR PROM_JUMP_TABLE_ENTRY(2) | |
| static void null_prom_printf(const char * fmt, ...) | |
| { | |
| } | |
| static void null_prom_display(const char *string, int pos, int clear) | |
| { | |
| } | |
| static void null_prom_monitor(void) | |
| { | |
| } | |
| static void null_prom_putc(char c) | |
| { | |
| } | |
| /* these are functions provided by the bootloader */ | |
| static void (* prom_putc)(char c) = null_prom_putc; | |
| void (* prom_printf)(const char * fmt, ...) = null_prom_printf; | |
| void (* prom_display)(const char *string, int pos, int clear) = | |
| null_prom_display; | |
| void (* prom_monitor)(void) = null_prom_monitor; | |
| unsigned int lasat_ndelay_divider; | |
| #define PROM_PRINTFBUF_SIZE 256 | |
| static char prom_printfbuf[PROM_PRINTFBUF_SIZE]; | |
| static void real_prom_printf(const char * fmt, ...) | |
| { | |
| va_list ap; | |
| int len; | |
| char *c = prom_printfbuf; | |
| int i; | |
| va_start(ap, fmt); | |
| len = vsnprintf(prom_printfbuf, PROM_PRINTFBUF_SIZE, fmt, ap); | |
| va_end(ap); | |
| /* output overflowed the buffer */ | |
| if (len < 0 || len > PROM_PRINTFBUF_SIZE) | |
| len = PROM_PRINTFBUF_SIZE; | |
| for (i=0; i < len; i++) { | |
| if (*c == '\n') | |
| prom_putc('\r'); | |
| prom_putc(*c++); | |
| } | |
| } | |
| static void setup_prom_vectors(void) | |
| { | |
| u32 version = *(u32 *)(RESET_VECTOR + 0x90); | |
| if (version >= 307) { | |
| prom_display = (void *)PROM_DISPLAY_ADDR; | |
| prom_putc = (void *)PROM_PUTC_ADDR; | |
| prom_printf = real_prom_printf; | |
| prom_monitor = (void *)PROM_MONITOR_ADDR; | |
| } | |
| prom_printf("prom vectors set up\n"); | |
| } | |
| static struct at93c_defs at93c_defs[N_MACHTYPES] = { | |
| {(void *)AT93C_REG_100, (void *)AT93C_RDATA_REG_100, AT93C_RDATA_SHIFT_100, | |
| AT93C_WDATA_SHIFT_100, AT93C_CS_M_100, AT93C_CLK_M_100}, | |
| {(void *)AT93C_REG_200, (void *)AT93C_RDATA_REG_200, AT93C_RDATA_SHIFT_200, | |
| AT93C_WDATA_SHIFT_200, AT93C_CS_M_200, AT93C_CLK_M_200}, | |
| }; | |
| void __init prom_init(void) | |
| { | |
| int argc = fw_arg0; | |
| char **argv = (char **) fw_arg1; | |
| setup_prom_vectors(); | |
| if (current_cpu_data.cputype == CPU_R5000) { | |
| prom_printf("LASAT 200 board\n"); | |
| mips_machtype = MACH_LASAT_200; | |
| lasat_ndelay_divider = LASAT_200_DIVIDER; | |
| } else { | |
| prom_printf("LASAT 100 board\n"); | |
| mips_machtype = MACH_LASAT_100; | |
| lasat_ndelay_divider = LASAT_100_DIVIDER; | |
| } | |
| at93c = &at93c_defs[mips_machtype]; | |
| lasat_init_board_info(); /* Read info from EEPROM */ | |
| mips_machgroup = MACH_GROUP_LASAT; | |
| /* Get the command line */ | |
| if (argc > 0) { | |
| strncpy(arcs_cmdline, argv[0], CL_SIZE-1); | |
| arcs_cmdline[CL_SIZE-1] = '\0'; | |
| } | |
| /* Set the I/O base address */ | |
| set_io_port_base(KSEG1); | |
| /* Set memory regions */ | |
| ioport_resource.start = 0; | |
| ioport_resource.end = 0xffffffff; /* Wrong, fixme. */ | |
| add_memory_region(0, lasat_board_info.li_memsize, BOOT_MEM_RAM); | |
| } | |
| unsigned long __init prom_free_prom_memory(void) | |
| { | |
| return 0; | |
| } | |
| const char *get_system_type(void) | |
| { | |
| return lasat_board_info.li_bmstr; | |
| } |