| /* | |
| * linux/arch/parisc/kernel/signal.c: Architecture-specific signal | |
| * handling support. | |
| * | |
| * Copyright (C) 2000 David Huggins-Daines <dhd@debian.org> | |
| * Copyright (C) 2000 Linuxcare, Inc. | |
| * | |
| * Based on the ia64, i386, and alpha versions. | |
| * | |
| * Like the IA-64, we are a recent enough port (we are *starting* | |
| * with glibc2.2) that we do not need to support the old non-realtime | |
| * Linux signals. Therefore we don't. HP/UX signals will go in | |
| * arch/parisc/hpux/signal.c when we figure out how to do them. | |
| */ | |
| #include <linux/sched.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/smp_lock.h> | |
| #include <linux/kernel.h> | |
| #include <linux/signal.h> | |
| #include <linux/errno.h> | |
| #include <linux/wait.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/unistd.h> | |
| #include <linux/stddef.h> | |
| #include <linux/compat.h> | |
| #include <linux/elf.h> | |
| #include <asm/ucontext.h> | |
| #include <asm/rt_sigframe.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/asm-offsets.h> | |
| #ifdef CONFIG_COMPAT | |
| #include <linux/compat.h> | |
| #include "signal32.h" | |
| #endif | |
| #define DEBUG_SIG 0 | |
| #define DEBUG_SIG_LEVEL 2 | |
| #if DEBUG_SIG | |
| #define DBG(LEVEL, ...) \ | |
| ((DEBUG_SIG_LEVEL >= LEVEL) \ | |
| ? printk(__VA_ARGS__) : (void) 0) | |
| #else | |
| #define DBG(LEVEL, ...) | |
| #endif | |
| #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) | |
| /* gcc will complain if a pointer is cast to an integer of different | |
| * size. If you really need to do this (and we do for an ELF32 user | |
| * application in an ELF64 kernel) then you have to do a cast to an | |
| * integer of the same size first. The A() macro accomplishes | |
| * this. */ | |
| #define A(__x) ((unsigned long)(__x)) | |
| int do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall); | |
| /* | |
| * Atomically swap in the new signal mask, and wait for a signal. | |
| */ | |
| #ifdef __LP64__ | |
| #include "sys32.h" | |
| #endif | |
| asmlinkage int | |
| sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs) | |
| { | |
| sigset_t saveset, newset; | |
| #ifdef __LP64__ | |
| compat_sigset_t newset32; | |
| if (is_compat_task()) { | |
| /* XXX: Don't preclude handling different sized sigset_t's. */ | |
| if (sigsetsize != sizeof(compat_sigset_t)) | |
| return -EINVAL; | |
| if (copy_from_user(&newset32, (compat_sigset_t __user *)unewset, sizeof(newset32))) | |
| return -EFAULT; | |
| sigset_32to64(&newset,&newset32); | |
| } else | |
| #endif | |
| { | |
| /* XXX: Don't preclude handling different sized sigset_t's. */ | |
| if (sigsetsize != sizeof(sigset_t)) | |
| return -EINVAL; | |
| if (copy_from_user(&newset, unewset, sizeof(newset))) | |
| return -EFAULT; | |
| } | |
| sigdelsetmask(&newset, ~_BLOCKABLE); | |
| spin_lock_irq(¤t->sighand->siglock); | |
| saveset = current->blocked; | |
| current->blocked = newset; | |
| recalc_sigpending(); | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| regs->gr[28] = -EINTR; | |
| while (1) { | |
| current->state = TASK_INTERRUPTIBLE; | |
| schedule(); | |
| if (do_signal(&saveset, regs, 1)) | |
| return -EINTR; | |
| } | |
| } | |
| /* | |
| * Do a signal return - restore sigcontext. | |
| */ | |
| /* Trampoline for calling rt_sigreturn() */ | |
| #define INSN_LDI_R25_0 0x34190000 /* ldi 0,%r25 (in_syscall=0) */ | |
| #define INSN_LDI_R25_1 0x34190002 /* ldi 1,%r25 (in_syscall=1) */ | |
| #define INSN_LDI_R20 0x3414015a /* ldi __NR_rt_sigreturn,%r20 */ | |
| #define INSN_BLE_SR2_R0 0xe4008200 /* be,l 0x100(%sr2,%r0),%sr0,%r31 */ | |
| #define INSN_NOP 0x08000240 /* nop */ | |
| /* For debugging */ | |
| #define INSN_DIE_HORRIBLY 0x68000ccc /* stw %r0,0x666(%sr0,%r0) */ | |
| static long | |
| restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs) | |
| { | |
| long err = 0; | |
| err |= __copy_from_user(regs->gr, sc->sc_gr, sizeof(regs->gr)); | |
| err |= __copy_from_user(regs->fr, sc->sc_fr, sizeof(regs->fr)); | |
| err |= __copy_from_user(regs->iaoq, sc->sc_iaoq, sizeof(regs->iaoq)); | |
| err |= __copy_from_user(regs->iasq, sc->sc_iasq, sizeof(regs->iasq)); | |
| err |= __get_user(regs->sar, &sc->sc_sar); | |
| DBG(2,"restore_sigcontext: iaoq is 0x%#lx / 0x%#lx\n", | |
| regs->iaoq[0],regs->iaoq[1]); | |
| DBG(2,"restore_sigcontext: r28 is %ld\n", regs->gr[28]); | |
| return err; | |
| } | |
| void | |
| sys_rt_sigreturn(struct pt_regs *regs, int in_syscall) | |
| { | |
| struct rt_sigframe __user *frame; | |
| struct siginfo si; | |
| sigset_t set; | |
| unsigned long usp = (regs->gr[30] & ~(0x01UL)); | |
| unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE; | |
| #ifdef __LP64__ | |
| compat_sigset_t compat_set; | |
| struct compat_rt_sigframe __user * compat_frame; | |
| if (is_compat_task()) | |
| sigframe_size = PARISC_RT_SIGFRAME_SIZE32; | |
| #endif | |
| /* Unwind the user stack to get the rt_sigframe structure. */ | |
| frame = (struct rt_sigframe __user *) | |
| (usp - sigframe_size); | |
| DBG(2,"sys_rt_sigreturn: frame is %p\n", frame); | |
| #ifdef __LP64__ | |
| compat_frame = (struct compat_rt_sigframe __user *)frame; | |
| if (is_compat_task()) { | |
| DBG(2,"sys_rt_sigreturn: ELF32 process.\n"); | |
| if (__copy_from_user(&compat_set, &compat_frame->uc.uc_sigmask, sizeof(compat_set))) | |
| goto give_sigsegv; | |
| sigset_32to64(&set,&compat_set); | |
| } else | |
| #endif | |
| { | |
| if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) | |
| goto give_sigsegv; | |
| } | |
| sigdelsetmask(&set, ~_BLOCKABLE); | |
| spin_lock_irq(¤t->sighand->siglock); | |
| current->blocked = set; | |
| recalc_sigpending(); | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| /* Good thing we saved the old gr[30], eh? */ | |
| #ifdef __LP64__ | |
| if (is_compat_task()) { | |
| DBG(1,"sys_rt_sigreturn: compat_frame->uc.uc_mcontext 0x%p\n", | |
| &compat_frame->uc.uc_mcontext); | |
| // FIXME: Load upper half from register file | |
| if (restore_sigcontext32(&compat_frame->uc.uc_mcontext, | |
| &compat_frame->regs, regs)) | |
| goto give_sigsegv; | |
| DBG(1,"sys_rt_sigreturn: usp %#08lx stack 0x%p\n", | |
| usp, &compat_frame->uc.uc_stack); | |
| if (do_sigaltstack32(&compat_frame->uc.uc_stack, NULL, usp) == -EFAULT) | |
| goto give_sigsegv; | |
| } else | |
| #endif | |
| { | |
| DBG(1,"sys_rt_sigreturn: frame->uc.uc_mcontext 0x%p\n", | |
| &frame->uc.uc_mcontext); | |
| if (restore_sigcontext(&frame->uc.uc_mcontext, regs)) | |
| goto give_sigsegv; | |
| DBG(1,"sys_rt_sigreturn: usp %#08lx stack 0x%p\n", | |
| usp, &frame->uc.uc_stack); | |
| if (do_sigaltstack(&frame->uc.uc_stack, NULL, usp) == -EFAULT) | |
| goto give_sigsegv; | |
| } | |
| /* If we are on the syscall path IAOQ will not be restored, and | |
| * if we are on the interrupt path we must not corrupt gr31. | |
| */ | |
| if (in_syscall) | |
| regs->gr[31] = regs->iaoq[0]; | |
| #if DEBUG_SIG | |
| DBG(1,"sys_rt_sigreturn: returning to %#lx, DUMPING REGS:\n", regs->iaoq[0]); | |
| show_regs(regs); | |
| #endif | |
| return; | |
| give_sigsegv: | |
| DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n"); | |
| si.si_signo = SIGSEGV; | |
| si.si_errno = 0; | |
| si.si_code = SI_KERNEL; | |
| si.si_pid = current->pid; | |
| si.si_uid = current->uid; | |
| si.si_addr = &frame->uc; | |
| force_sig_info(SIGSEGV, &si, current); | |
| return; | |
| } | |
| /* | |
| * Set up a signal frame. | |
| */ | |
| static inline void __user * | |
| get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) | |
| { | |
| /*FIXME: ELF32 vs. ELF64 has different frame_size, but since we | |
| don't use the parameter it doesn't matter */ | |
| DBG(1,"get_sigframe: ka = %#lx, sp = %#lx, frame_size = %#lx\n", | |
| (unsigned long)ka, sp, frame_size); | |
| if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp)) | |
| sp = current->sas_ss_sp; /* Stacks grow up! */ | |
| DBG(1,"get_sigframe: Returning sp = %#lx\n", (unsigned long)sp); | |
| return (void __user *) sp; /* Stacks grow up. Fun. */ | |
| } | |
| static long | |
| setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, int in_syscall) | |
| { | |
| unsigned long flags = 0; | |
| long err = 0; | |
| if (on_sig_stack((unsigned long) sc)) | |
| flags |= PARISC_SC_FLAG_ONSTACK; | |
| if (in_syscall) { | |
| flags |= PARISC_SC_FLAG_IN_SYSCALL; | |
| /* regs->iaoq is undefined in the syscall return path */ | |
| err |= __put_user(regs->gr[31], &sc->sc_iaoq[0]); | |
| err |= __put_user(regs->gr[31]+4, &sc->sc_iaoq[1]); | |
| err |= __put_user(regs->sr[3], &sc->sc_iasq[0]); | |
| err |= __put_user(regs->sr[3], &sc->sc_iasq[1]); | |
| DBG(1,"setup_sigcontext: iaoq %#lx / %#lx (in syscall)\n", | |
| regs->gr[31], regs->gr[31]+4); | |
| } else { | |
| err |= __copy_to_user(sc->sc_iaoq, regs->iaoq, sizeof(regs->iaoq)); | |
| err |= __copy_to_user(sc->sc_iasq, regs->iasq, sizeof(regs->iasq)); | |
| DBG(1,"setup_sigcontext: iaoq %#lx / %#lx (not in syscall)\n", | |
| regs->iaoq[0], regs->iaoq[1]); | |
| } | |
| err |= __put_user(flags, &sc->sc_flags); | |
| err |= __copy_to_user(sc->sc_gr, regs->gr, sizeof(regs->gr)); | |
| err |= __copy_to_user(sc->sc_fr, regs->fr, sizeof(regs->fr)); | |
| err |= __put_user(regs->sar, &sc->sc_sar); | |
| DBG(1,"setup_sigcontext: r28 is %ld\n", regs->gr[28]); | |
| return err; | |
| } | |
| static long | |
| setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, | |
| sigset_t *set, struct pt_regs *regs, int in_syscall) | |
| { | |
| struct rt_sigframe __user *frame; | |
| unsigned long rp, usp; | |
| unsigned long haddr, sigframe_size; | |
| int err = 0; | |
| #ifdef __LP64__ | |
| compat_int_t compat_val; | |
| struct compat_rt_sigframe __user * compat_frame; | |
| compat_sigset_t compat_set; | |
| #endif | |
| usp = (regs->gr[30] & ~(0x01UL)); | |
| /*FIXME: frame_size parameter is unused, remove it. */ | |
| frame = get_sigframe(ka, usp, sizeof(*frame)); | |
| DBG(1,"SETUP_RT_FRAME: START\n"); | |
| DBG(1,"setup_rt_frame: frame %p info %p\n", frame, info); | |
| #ifdef __LP64__ | |
| compat_frame = (struct compat_rt_sigframe __user *)frame; | |
| if (is_compat_task()) { | |
| DBG(1,"setup_rt_frame: frame->info = 0x%p\n", &compat_frame->info); | |
| err |= copy_siginfo_to_user32(&compat_frame->info, info); | |
| DBG(1,"SETUP_RT_FRAME: 1\n"); | |
| compat_val = (compat_int_t)current->sas_ss_sp; | |
| err |= __put_user(compat_val, &compat_frame->uc.uc_stack.ss_sp); | |
| DBG(1,"SETUP_RT_FRAME: 2\n"); | |
| compat_val = (compat_int_t)current->sas_ss_size; | |
| err |= __put_user(compat_val, &compat_frame->uc.uc_stack.ss_size); | |
| DBG(1,"SETUP_RT_FRAME: 3\n"); | |
| compat_val = sas_ss_flags(regs->gr[30]); | |
| err |= __put_user(compat_val, &compat_frame->uc.uc_stack.ss_flags); | |
| DBG(1,"setup_rt_frame: frame->uc = 0x%p\n", &compat_frame->uc); | |
| DBG(1,"setup_rt_frame: frame->uc.uc_mcontext = 0x%p\n", &compat_frame->uc.uc_mcontext); | |
| err |= setup_sigcontext32(&compat_frame->uc.uc_mcontext, | |
| &compat_frame->regs, regs, in_syscall); | |
| sigset_64to32(&compat_set,set); | |
| err |= __copy_to_user(&compat_frame->uc.uc_sigmask, &compat_set, sizeof(compat_set)); | |
| } else | |
| #endif | |
| { | |
| DBG(1,"setup_rt_frame: frame->info = 0x%p\n", &frame->info); | |
| err |= copy_siginfo_to_user(&frame->info, info); | |
| err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); | |
| err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); | |
| err |= __put_user(sas_ss_flags(regs->gr[30]), | |
| &frame->uc.uc_stack.ss_flags); | |
| DBG(1,"setup_rt_frame: frame->uc = 0x%p\n", &frame->uc); | |
| DBG(1,"setup_rt_frame: frame->uc.uc_mcontext = 0x%p\n", &frame->uc.uc_mcontext); | |
| err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, in_syscall); | |
| /* FIXME: Should probably be converted aswell for the compat case */ | |
| err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); | |
| } | |
| if (err) | |
| goto give_sigsegv; | |
| /* Set up to return from userspace. If provided, use a stub | |
| already in userspace. The first words of tramp are used to | |
| save the previous sigrestartblock trampoline that might be | |
| on the stack. We start the sigreturn trampoline at | |
| SIGRESTARTBLOCK_TRAMP+X. */ | |
| err |= __put_user(in_syscall ? INSN_LDI_R25_1 : INSN_LDI_R25_0, | |
| &frame->tramp[SIGRESTARTBLOCK_TRAMP+0]); | |
| err |= __put_user(INSN_LDI_R20, | |
| &frame->tramp[SIGRESTARTBLOCK_TRAMP+1]); | |
| err |= __put_user(INSN_BLE_SR2_R0, | |
| &frame->tramp[SIGRESTARTBLOCK_TRAMP+2]); | |
| err |= __put_user(INSN_NOP, &frame->tramp[SIGRESTARTBLOCK_TRAMP+3]); | |
| #if DEBUG_SIG | |
| /* Assert that we're flushing in the correct space... */ | |
| { | |
| int sid; | |
| asm ("mfsp %%sr3,%0" : "=r" (sid)); | |
| DBG(1,"setup_rt_frame: Flushing 64 bytes at space %#x offset %p\n", | |
| sid, frame->tramp); | |
| } | |
| #endif | |
| flush_user_dcache_range((unsigned long) &frame->tramp[0], | |
| (unsigned long) &frame->tramp[TRAMP_SIZE]); | |
| flush_user_icache_range((unsigned long) &frame->tramp[0], | |
| (unsigned long) &frame->tramp[TRAMP_SIZE]); | |
| /* TRAMP Words 0-4, Lenght 5 = SIGRESTARTBLOCK_TRAMP | |
| * TRAMP Words 5-9, Length 4 = SIGRETURN_TRAMP | |
| * So the SIGRETURN_TRAMP is at the end of SIGRESTARTBLOCK_TRAMP | |
| */ | |
| rp = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP]; | |
| if (err) | |
| goto give_sigsegv; | |
| haddr = A(ka->sa.sa_handler); | |
| /* The sa_handler may be a pointer to a function descriptor */ | |
| #ifdef __LP64__ | |
| if (is_compat_task()) { | |
| #endif | |
| if (haddr & PA_PLABEL_FDESC) { | |
| Elf32_Fdesc fdesc; | |
| Elf32_Fdesc __user *ufdesc = (Elf32_Fdesc __user *)A(haddr & ~3); | |
| err = __copy_from_user(&fdesc, ufdesc, sizeof(fdesc)); | |
| if (err) | |
| goto give_sigsegv; | |
| haddr = fdesc.addr; | |
| regs->gr[19] = fdesc.gp; | |
| } | |
| #ifdef __LP64__ | |
| } else { | |
| Elf64_Fdesc fdesc; | |
| Elf64_Fdesc __user *ufdesc = (Elf64_Fdesc __user *)A(haddr & ~3); | |
| err = __copy_from_user(&fdesc, ufdesc, sizeof(fdesc)); | |
| if (err) | |
| goto give_sigsegv; | |
| haddr = fdesc.addr; | |
| regs->gr[19] = fdesc.gp; | |
| DBG(1,"setup_rt_frame: 64 bit signal, exe=%#lx, r19=%#lx, in_syscall=%d\n", | |
| haddr, regs->gr[19], in_syscall); | |
| } | |
| #endif | |
| /* The syscall return path will create IAOQ values from r31. | |
| */ | |
| sigframe_size = PARISC_RT_SIGFRAME_SIZE; | |
| #ifdef __LP64__ | |
| if (is_compat_task()) | |
| sigframe_size = PARISC_RT_SIGFRAME_SIZE32; | |
| #endif | |
| if (in_syscall) { | |
| regs->gr[31] = haddr; | |
| #ifdef __LP64__ | |
| if (!test_thread_flag(TIF_32BIT)) | |
| sigframe_size |= 1; | |
| #endif | |
| } else { | |
| unsigned long psw = USER_PSW; | |
| #ifdef __LP64__ | |
| if (!test_thread_flag(TIF_32BIT)) | |
| psw |= PSW_W; | |
| #endif | |
| /* If we are singlestepping, arrange a trap to be delivered | |
| when we return to userspace. Note the semantics -- we | |
| should trap before the first insn in the handler is | |
| executed. Ref: | |
| http://sources.redhat.com/ml/gdb/2004-11/msg00245.html | |
| */ | |
| if (pa_psw(current)->r) { | |
| pa_psw(current)->r = 0; | |
| psw |= PSW_R; | |
| mtctl(-1, 0); | |
| } | |
| regs->gr[0] = psw; | |
| regs->iaoq[0] = haddr | 3; | |
| regs->iaoq[1] = regs->iaoq[0] + 4; | |
| } | |
| regs->gr[2] = rp; /* userland return pointer */ | |
| regs->gr[26] = sig; /* signal number */ | |
| #ifdef __LP64__ | |
| if (is_compat_task()) { | |
| regs->gr[25] = A(&compat_frame->info); /* siginfo pointer */ | |
| regs->gr[24] = A(&compat_frame->uc); /* ucontext pointer */ | |
| } else | |
| #endif | |
| { | |
| regs->gr[25] = A(&frame->info); /* siginfo pointer */ | |
| regs->gr[24] = A(&frame->uc); /* ucontext pointer */ | |
| } | |
| DBG(1,"setup_rt_frame: making sigreturn frame: %#lx + %#lx = %#lx\n", | |
| regs->gr[30], sigframe_size, | |
| regs->gr[30] + sigframe_size); | |
| /* Raise the user stack pointer to make a proper call frame. */ | |
| regs->gr[30] = (A(frame) + sigframe_size); | |
| DBG(1,"setup_rt_frame: sig deliver (%s,%d) frame=0x%p sp=%#lx iaoq=%#lx/%#lx rp=%#lx\n", | |
| current->comm, current->pid, frame, regs->gr[30], | |
| regs->iaoq[0], regs->iaoq[1], rp); | |
| return 1; | |
| give_sigsegv: | |
| DBG(1,"setup_rt_frame: sending SIGSEGV\n"); | |
| force_sigsegv(sig, current); | |
| return 0; | |
| } | |
| /* | |
| * OK, we're invoking a handler. | |
| */ | |
| static long | |
| handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, | |
| sigset_t *oldset, struct pt_regs *regs, int in_syscall) | |
| { | |
| DBG(1,"handle_signal: sig=%ld, ka=%p, info=%p, oldset=%p, regs=%p\n", | |
| sig, ka, info, oldset, regs); | |
| /* Set up the stack frame */ | |
| if (!setup_rt_frame(sig, ka, info, oldset, regs, in_syscall)) | |
| return 0; | |
| spin_lock_irq(¤t->sighand->siglock); | |
| sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); | |
| if (!(ka->sa.sa_flags & SA_NODEFER)) | |
| sigaddset(¤t->blocked,sig); | |
| recalc_sigpending(); | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| return 1; | |
| } | |
| /* | |
| * Note that 'init' is a special process: it doesn't get signals it doesn't | |
| * want to handle. Thus you cannot kill init even with a SIGKILL even by | |
| * mistake. | |
| * | |
| * We need to be able to restore the syscall arguments (r21-r26) to | |
| * restart syscalls. Thus, the syscall path should save them in the | |
| * pt_regs structure (it's okay to do so since they are caller-save | |
| * registers). As noted below, the syscall number gets restored for | |
| * us due to the magic of delayed branching. | |
| */ | |
| asmlinkage int | |
| do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall) | |
| { | |
| siginfo_t info; | |
| struct k_sigaction ka; | |
| int signr; | |
| DBG(1,"\ndo_signal: oldset=0x%p, regs=0x%p, sr7 %#lx, in_syscall=%d\n", | |
| oldset, regs, regs->sr[7], in_syscall); | |
| /* Everyone else checks to see if they are in kernel mode at | |
| this point and exits if that's the case. I'm not sure why | |
| we would be called in that case, but for some reason we | |
| are. */ | |
| if (!oldset) | |
| oldset = ¤t->blocked; | |
| DBG(1,"do_signal: oldset %08lx / %08lx\n", | |
| oldset->sig[0], oldset->sig[1]); | |
| /* May need to force signal if handle_signal failed to deliver */ | |
| while (1) { | |
| signr = get_signal_to_deliver(&info, &ka, regs, NULL); | |
| DBG(3,"do_signal: signr = %d, regs->gr[28] = %ld\n", signr, regs->gr[28]); | |
| if (signr <= 0) | |
| break; | |
| /* Restart a system call if necessary. */ | |
| if (in_syscall) { | |
| /* Check the return code */ | |
| switch (regs->gr[28]) { | |
| case -ERESTART_RESTARTBLOCK: | |
| current_thread_info()->restart_block.fn = do_no_restart_syscall; | |
| case -ERESTARTNOHAND: | |
| DBG(1,"ERESTARTNOHAND: returning -EINTR\n"); | |
| regs->gr[28] = -EINTR; | |
| break; | |
| case -ERESTARTSYS: | |
| if (!(ka.sa.sa_flags & SA_RESTART)) { | |
| DBG(1,"ERESTARTSYS: putting -EINTR\n"); | |
| regs->gr[28] = -EINTR; | |
| break; | |
| } | |
| /* fallthrough */ | |
| case -ERESTARTNOINTR: | |
| /* A syscall is just a branch, so all | |
| we have to do is fiddle the return pointer. */ | |
| regs->gr[31] -= 8; /* delayed branching */ | |
| /* Preserve original r28. */ | |
| regs->gr[28] = regs->orig_r28; | |
| break; | |
| } | |
| } | |
| /* Whee! Actually deliver the signal. If the | |
| delivery failed, we need to continue to iterate in | |
| this loop so we can deliver the SIGSEGV... */ | |
| if (handle_signal(signr, &info, &ka, oldset, regs, in_syscall)) { | |
| DBG(1,KERN_DEBUG "do_signal: Exit (success), regs->gr[28] = %ld\n", | |
| regs->gr[28]); | |
| return 1; | |
| } | |
| } | |
| /* end of while(1) looping forever if we can't force a signal */ | |
| /* Did we come from a system call? */ | |
| if (in_syscall) { | |
| /* Restart the system call - no handlers present */ | |
| if (regs->gr[28] == -ERESTART_RESTARTBLOCK) { | |
| unsigned int *usp = (unsigned int *)regs->gr[30]; | |
| /* Setup a trampoline to restart the syscall | |
| * with __NR_restart_syscall | |
| * | |
| * 0: <return address (orig r31)> | |
| * 4: <2nd half for 64-bit> | |
| * 8: ldw 0(%sp), %r31 | |
| * 12: be 0x100(%sr2, %r0) | |
| * 16: ldi __NR_restart_syscall, %r20 | |
| */ | |
| #ifndef __LP64__ | |
| put_user(regs->gr[31], &usp[0]); | |
| put_user(0x0fc0109f, &usp[2]); | |
| #else | |
| put_user(regs->gr[31] >> 32, &usp[0]); | |
| put_user(regs->gr[31] & 0xffffffff, &usp[1]); | |
| put_user(0x0fc010df, &usp[2]); | |
| #endif | |
| put_user(0xe0008200, &usp[3]); | |
| put_user(0x34140000, &usp[4]); | |
| /* Stack is 64-byte aligned, and we only need | |
| * to flush 1 cache line. | |
| * Flushing one cacheline is cheap. | |
| * "sync" on bigger (> 4 way) boxes is not. | |
| */ | |
| asm("fdc %%r0(%%sr3, %0)\n" | |
| "sync\n" | |
| "fic %%r0(%%sr3, %0)\n" | |
| "sync\n" | |
| : : "r"(regs->gr[30])); | |
| regs->gr[31] = regs->gr[30] + 8; | |
| /* Preserve original r28. */ | |
| regs->gr[28] = regs->orig_r28; | |
| } else if (regs->gr[28] == -ERESTARTNOHAND || | |
| regs->gr[28] == -ERESTARTSYS || | |
| regs->gr[28] == -ERESTARTNOINTR) { | |
| /* Hooray for delayed branching. We don't | |
| have to restore %r20 (the system call | |
| number) because it gets loaded in the delay | |
| slot of the branch external instruction. */ | |
| regs->gr[31] -= 8; | |
| /* Preserve original r28. */ | |
| regs->gr[28] = regs->orig_r28; | |
| } | |
| } | |
| DBG(1,"do_signal: Exit (not delivered), regs->gr[28] = %ld\n", | |
| regs->gr[28]); | |
| return 0; | |
| } |