| /* | |
| * MPC7448HPC2 (Taiga) board Device Tree Source | |
| * | |
| * Copyright 2006 Freescale Semiconductor Inc. | |
| * 2006 Roy Zang <Roy Zang at freescale.com>. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| / { | |
| model = "mpc7448hpc2"; | |
| compatible = "mpc74xx"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| linux,phandle = <100>; | |
| cpus { | |
| #cpus = <1>; | |
| #address-cells = <1>; | |
| #size-cells =<0>; | |
| linux,phandle = <200>; | |
| PowerPC,7448@0 { | |
| device_type = "cpu"; | |
| reg = <0>; | |
| d-cache-line-size = <20>; // 32 bytes | |
| i-cache-line-size = <20>; // 32 bytes | |
| d-cache-size = <8000>; // L1, 32K bytes | |
| i-cache-size = <8000>; // L1, 32K bytes | |
| timebase-frequency = <0>; // 33 MHz, from uboot | |
| clock-frequency = <0>; // From U-Boot | |
| bus-frequency = <0>; // From U-Boot | |
| 32-bit; | |
| linux,phandle = <201>; | |
| linux,boot-cpu; | |
| }; | |
| }; | |
| memory { | |
| device_type = "memory"; | |
| linux,phandle = <300>; | |
| reg = <00000000 20000000 // DDR2 512M at 0 | |
| >; | |
| }; | |
| tsi108@c0000000 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| #interrupt-cells = <2>; | |
| device_type = "tsi-bridge"; | |
| ranges = <00000000 c0000000 00010000>; | |
| reg = <c0000000 00010000>; | |
| bus-frequency = <0>; | |
| i2c@7000 { | |
| interrupt-parent = <7400>; | |
| interrupts = <E 0>; | |
| reg = <7000 400>; | |
| device_type = "i2c"; | |
| compatible = "tsi-i2c"; | |
| }; | |
| mdio@6000 { | |
| device_type = "mdio"; | |
| compatible = "tsi-ethernet"; | |
| ethernet-phy@6000 { | |
| linux,phandle = <6000>; | |
| interrupt-parent = <7400>; | |
| interrupts = <2 1>; | |
| reg = <6000 50>; | |
| phy-id = <8>; | |
| device_type = "ethernet-phy"; | |
| }; | |
| ethernet-phy@6400 { | |
| linux,phandle = <6400>; | |
| interrupt-parent = <7400>; | |
| interrupts = <2 1>; | |
| reg = <6000 50>; | |
| phy-id = <9>; | |
| device_type = "ethernet-phy"; | |
| }; | |
| }; | |
| ethernet@6200 { | |
| #size-cells = <0>; | |
| device_type = "network"; | |
| model = "TSI-ETH"; | |
| compatible = "tsi-ethernet"; | |
| reg = <6000 200>; | |
| address = [ 00 06 D2 00 00 01 ]; | |
| interrupts = <10 2>; | |
| interrupt-parent = <7400>; | |
| phy-handle = <6000>; | |
| }; | |
| ethernet@6600 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| device_type = "network"; | |
| model = "TSI-ETH"; | |
| compatible = "tsi-ethernet"; | |
| reg = <6400 200>; | |
| address = [ 00 06 D2 00 00 02 ]; | |
| interrupts = <11 2>; | |
| interrupt-parent = <7400>; | |
| phy-handle = <6400>; | |
| }; | |
| serial@7808 { | |
| device_type = "serial"; | |
| compatible = "ns16550"; | |
| reg = <7808 200>; | |
| clock-frequency = <3f6b5a00>; | |
| interrupts = <c 0>; | |
| interrupt-parent = <7400>; | |
| }; | |
| serial@7c08 { | |
| device_type = "serial"; | |
| compatible = "ns16550"; | |
| reg = <7c08 200>; | |
| clock-frequency = <3f6b5a00>; | |
| interrupts = <d 0>; | |
| interrupt-parent = <7400>; | |
| }; | |
| pic@7400 { | |
| linux,phandle = <7400>; | |
| clock-frequency = <0>; | |
| interrupt-controller; | |
| #address-cells = <0>; | |
| #interrupt-cells = <2>; | |
| reg = <7400 400>; | |
| built-in; | |
| compatible = "chrp,open-pic"; | |
| device_type = "open-pic"; | |
| big-endian; | |
| }; | |
| pci@1000 { | |
| compatible = "tsi10x"; | |
| device_type = "pci"; | |
| linux,phandle = <1000>; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| reg = <1000 1000>; | |
| bus-range = <0 0>; | |
| ranges = <02000000 0 e0000000 e0000000 0 1A000000 | |
| 01000000 0 00000000 fa000000 0 00010000>; | |
| clock-frequency = <7f28154>; | |
| interrupt-parent = <7400>; | |
| interrupts = <17 2>; | |
| interrupt-map-mask = <f800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x11 */ | |
| 0800 0 0 1 7400 24 0 | |
| 0800 0 0 2 7400 25 0 | |
| 0800 0 0 3 7400 26 0 | |
| 0800 0 0 4 7400 27 0 | |
| /* IDSEL 0x12 */ | |
| 1000 0 0 1 7400 25 0 | |
| 1000 0 0 2 7400 26 0 | |
| 1000 0 0 3 7400 27 0 | |
| 1000 0 0 4 7400 24 0 | |
| /* IDSEL 0x13 */ | |
| 1800 0 0 1 7400 26 0 | |
| 1800 0 0 2 7400 27 0 | |
| 1800 0 0 3 7400 24 0 | |
| 1800 0 0 4 7400 25 0 | |
| /* IDSEL 0x14 */ | |
| 2000 0 0 1 7400 27 0 | |
| 2000 0 0 2 7400 24 0 | |
| 2000 0 0 3 7400 25 0 | |
| 2000 0 0 4 7400 26 0 | |
| >; | |
| }; | |
| }; | |
| }; |