| /* | |
| * MPC8272 ADS Device Tree Source | |
| * | |
| * Copyright 2005 Freescale Semiconductor Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| / { | |
| model = "MPC8272ADS"; | |
| compatible = "MPC8260ADS"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| linux,phandle = <100>; | |
| cpus { | |
| #cpus = <1>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| linux,phandle = <200>; | |
| PowerPC,8272@0 { | |
| device_type = "cpu"; | |
| reg = <0>; | |
| d-cache-line-size = <20>; // 32 bytes | |
| i-cache-line-size = <20>; // 32 bytes | |
| d-cache-size = <4000>; // L1, 16K | |
| i-cache-size = <4000>; // L1, 16K | |
| timebase-frequency = <0>; | |
| bus-frequency = <0>; | |
| clock-frequency = <0>; | |
| 32-bit; | |
| linux,phandle = <201>; | |
| linux,boot-cpu; | |
| }; | |
| }; | |
| interrupt-controller@f8200000 { | |
| linux,phandle = <f8200000>; | |
| #address-cells = <0>; | |
| #interrupt-cells = <2>; | |
| interrupt-controller; | |
| reg = <f8200000 f8200004>; | |
| built-in; | |
| device_type = "pci-pic"; | |
| }; | |
| memory { | |
| device_type = "memory"; | |
| linux,phandle = <300>; | |
| reg = <00000000 4000000 f4500000 00000020>; | |
| }; | |
| soc8272@f0000000 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| #interrupt-cells = <2>; | |
| device_type = "soc"; | |
| ranges = < 0 0 2 00000000 f0000000 00053000>; | |
| reg = <f0000000 0>; | |
| mdio@0 { | |
| device_type = "mdio"; | |
| compatible = "fs_enet"; | |
| reg = <0 0>; | |
| linux,phandle = <24520>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| ethernet-phy@0 { | |
| linux,phandle = <2452000>; | |
| interrupt-parent = <10c00>; | |
| interrupts = <19 1>; | |
| reg = <0>; | |
| bitbang = [ 12 12 13 02 02 01 ]; | |
| device_type = "ethernet-phy"; | |
| }; | |
| ethernet-phy@1 { | |
| linux,phandle = <2452001>; | |
| interrupt-parent = <10c00>; | |
| interrupts = <19 1>; | |
| bitbang = [ 12 12 13 02 02 01 ]; | |
| reg = <3>; | |
| device_type = "ethernet-phy"; | |
| }; | |
| }; | |
| ethernet@24000 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| device_type = "network"; | |
| device-id = <2>; | |
| compatible = "fs_enet"; | |
| model = "FCC"; | |
| reg = <11300 20 8400 100 11380 30>; | |
| mac-address = [ 00 11 2F 99 43 54 ]; | |
| interrupts = <20 2>; | |
| interrupt-parent = <10c00>; | |
| phy-handle = <2452000>; | |
| rx-clock = <13>; | |
| tx-clock = <12>; | |
| }; | |
| ethernet@25000 { | |
| device_type = "network"; | |
| device-id = <3>; | |
| compatible = "fs_enet"; | |
| model = "FCC"; | |
| reg = <11320 20 8500 100 113b0 30>; | |
| mac-address = [ 00 11 2F 99 44 54 ]; | |
| interrupts = <21 2>; | |
| interrupt-parent = <10c00>; | |
| phy-handle = <2452001>; | |
| rx-clock = <17>; | |
| tx-clock = <18>; | |
| }; | |
| cpm@f0000000 { | |
| linux,phandle = <f0000000>; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| #interrupt-cells = <2>; | |
| device_type = "cpm"; | |
| model = "CPM2"; | |
| ranges = <00000000 00000000 3ffff>; | |
| reg = <10d80 3280>; | |
| command-proc = <119c0>; | |
| brg-frequency = <17D7840>; | |
| cpm_clk = <BEBC200>; | |
| scc@11a00 { | |
| device_type = "serial"; | |
| compatible = "cpm_uart"; | |
| model = "SCC"; | |
| device-id = <2>; | |
| reg = <11a00 20 8000 100>; | |
| current-speed = <1c200>; | |
| interrupts = <28 2>; | |
| interrupt-parent = <10c00>; | |
| clock-setup = <0 00ffffff>; | |
| rx-clock = <1>; | |
| tx-clock = <1>; | |
| }; | |
| scc@11a60 { | |
| device_type = "serial"; | |
| compatible = "cpm_uart"; | |
| model = "SCC"; | |
| device-id = <5>; | |
| reg = <11a60 20 8300 100>; | |
| current-speed = <1c200>; | |
| interrupts = <2b 2>; | |
| interrupt-parent = <10c00>; | |
| clock-setup = <1b ffffff00>; | |
| rx-clock = <4>; | |
| tx-clock = <4>; | |
| }; | |
| }; | |
| interrupt-controller@10c00 { | |
| linux,phandle = <10c00>; | |
| #address-cells = <0>; | |
| #interrupt-cells = <2>; | |
| interrupt-controller; | |
| reg = <10c00 80>; | |
| built-in; | |
| device_type = "cpm-pic"; | |
| compatible = "CPM2"; | |
| }; | |
| pci@0500 { | |
| linux,phandle = <0500>; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| compatible = "8272"; | |
| device_type = "pci"; | |
| reg = <10430 4dc>; | |
| clock-frequency = <3f940aa>; | |
| interrupt-map-mask = <f800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x16 */ | |
| b000 0 0 1 f8200000 40 0 | |
| b000 0 0 2 f8200000 41 0 | |
| b000 0 0 3 f8200000 42 0 | |
| b000 0 0 4 f8200000 43 0 | |
| /* IDSEL 0x17 */ | |
| b800 0 0 1 f8200000 43 0 | |
| b800 0 0 2 f8200000 40 0 | |
| b800 0 0 3 f8200000 41 0 | |
| b800 0 0 4 f8200000 42 0 | |
| /* IDSEL 0x18 */ | |
| c000 0 0 1 f8200000 42 0 | |
| c000 0 0 2 f8200000 43 0 | |
| c000 0 0 3 f8200000 40 0 | |
| c000 0 0 4 f8200000 41 0>; | |
| interrupt-parent = <10c00>; | |
| interrupts = <14 3>; | |
| bus-range = <0 0>; | |
| ranges = <02000000 0 80000000 80000000 0 40000000 | |
| 01000000 0 00000000 f6000000 0 02000000>; | |
| }; | |
| /* May need to remove if on a part without crypto engine */ | |
| crypto@30000 { | |
| device_type = "crypto"; | |
| model = "SEC2"; | |
| compatible = "talitos"; | |
| reg = <30000 10000>; | |
| interrupts = <b 0>; | |
| interrupt-parent = <10c00>; | |
| num-channels = <4>; | |
| channel-fifo-len = <18>; | |
| exec-units-mask = <0000007e>; | |
| /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ | |
| descriptor-types-mask = <01010ebf>; | |
| }; | |
| }; | |
| }; |