| /* | |
| * MPC8360E EMDS Device Tree Source | |
| * | |
| * Copyright 2006 Freescale Semiconductor Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| /* | |
| /memreserve/ 00000000 1000000; | |
| */ | |
| / { | |
| model = "MPC8360EPB"; | |
| compatible = "MPC83xx"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| linux,phandle = <100>; | |
| cpus { | |
| #cpus = <1>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| linux,phandle = <200>; | |
| PowerPC,8360@0 { | |
| device_type = "cpu"; | |
| reg = <0>; | |
| d-cache-line-size = <20>; // 32 bytes | |
| i-cache-line-size = <20>; // 32 bytes | |
| d-cache-size = <8000>; // L1, 32K | |
| i-cache-size = <8000>; // L1, 32K | |
| timebase-frequency = <3EF1480>; | |
| bus-frequency = <FBC5200>; | |
| clock-frequency = <1F78A400>; | |
| 32-bit; | |
| linux,phandle = <201>; | |
| linux,boot-cpu; | |
| }; | |
| }; | |
| memory { | |
| device_type = "memory"; | |
| linux,phandle = <300>; | |
| reg = <00000000 10000000>; | |
| }; | |
| bcsr@f8000000 { | |
| device_type = "board-control"; | |
| reg = <f8000000 8000>; | |
| }; | |
| soc8360@e0000000 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| #interrupt-cells = <2>; | |
| device_type = "soc"; | |
| ranges = <0 e0000000 00100000>; | |
| reg = <e0000000 00000200>; | |
| bus-frequency = <FBC5200>; | |
| wdt@200 { | |
| device_type = "watchdog"; | |
| compatible = "mpc83xx_wdt"; | |
| reg = <200 100>; | |
| }; | |
| i2c@3000 { | |
| device_type = "i2c"; | |
| compatible = "fsl-i2c"; | |
| reg = <3000 100>; | |
| interrupts = <e 8>; | |
| interrupt-parent = <700>; | |
| dfsrr; | |
| }; | |
| i2c@3100 { | |
| device_type = "i2c"; | |
| compatible = "fsl-i2c"; | |
| reg = <3100 100>; | |
| interrupts = <f 8>; | |
| interrupt-parent = <700>; | |
| dfsrr; | |
| }; | |
| serial@4500 { | |
| device_type = "serial"; | |
| compatible = "ns16550"; | |
| reg = <4500 100>; | |
| clock-frequency = <FBC5200>; | |
| interrupts = <9 8>; | |
| interrupt-parent = <700>; | |
| }; | |
| serial@4600 { | |
| device_type = "serial"; | |
| compatible = "ns16550"; | |
| reg = <4600 100>; | |
| clock-frequency = <FBC5200>; | |
| interrupts = <a 8>; | |
| interrupt-parent = <700>; | |
| }; | |
| crypto@30000 { | |
| device_type = "crypto"; | |
| model = "SEC2"; | |
| compatible = "talitos"; | |
| reg = <30000 10000>; | |
| interrupts = <b 8>; | |
| interrupt-parent = <700>; | |
| num-channels = <4>; | |
| channel-fifo-len = <18>; | |
| exec-units-mask = <0000007e>; | |
| /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ | |
| descriptor-types-mask = <01010ebf>; | |
| }; | |
| pci@8500 { | |
| linux,phandle = <8500>; | |
| interrupt-map-mask = <f800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x11 AD17 */ | |
| 8800 0 0 1 700 14 8 | |
| 8800 0 0 2 700 15 8 | |
| 8800 0 0 3 700 16 8 | |
| 8800 0 0 4 700 17 8 | |
| /* IDSEL 0x12 AD18 */ | |
| 9000 0 0 1 700 16 8 | |
| 9000 0 0 2 700 17 8 | |
| 9000 0 0 3 700 14 8 | |
| 9000 0 0 4 700 15 8 | |
| /* IDSEL 0x13 AD19 */ | |
| 9800 0 0 1 700 17 8 | |
| 9800 0 0 2 700 14 8 | |
| 9800 0 0 3 700 15 8 | |
| 9800 0 0 4 700 16 8 | |
| /* IDSEL 0x15 AD21*/ | |
| a800 0 0 1 700 14 8 | |
| a800 0 0 2 700 15 8 | |
| a800 0 0 3 700 16 8 | |
| a800 0 0 4 700 17 8 | |
| /* IDSEL 0x16 AD22*/ | |
| b000 0 0 1 700 17 8 | |
| b000 0 0 2 700 14 8 | |
| b000 0 0 3 700 15 8 | |
| b000 0 0 4 700 16 8 | |
| /* IDSEL 0x17 AD23*/ | |
| b800 0 0 1 700 16 8 | |
| b800 0 0 2 700 17 8 | |
| b800 0 0 3 700 14 8 | |
| b800 0 0 4 700 15 8 | |
| /* IDSEL 0x18 AD24*/ | |
| c000 0 0 1 700 15 8 | |
| c000 0 0 2 700 16 8 | |
| c000 0 0 3 700 17 8 | |
| c000 0 0 4 700 14 8>; | |
| interrupt-parent = <700>; | |
| interrupts = <42 8>; | |
| bus-range = <0 0>; | |
| ranges = <02000000 0 a0000000 a0000000 0 10000000 | |
| 42000000 0 80000000 80000000 0 10000000 | |
| 01000000 0 00000000 e2000000 0 00100000>; | |
| clock-frequency = <3f940aa>; | |
| #interrupt-cells = <1>; | |
| #size-cells = <2>; | |
| #address-cells = <3>; | |
| reg = <8500 100>; | |
| compatible = "83xx"; | |
| device_type = "pci"; | |
| }; | |
| pic@700 { | |
| linux,phandle = <700>; | |
| interrupt-controller; | |
| #address-cells = <0>; | |
| #interrupt-cells = <2>; | |
| reg = <700 100>; | |
| built-in; | |
| device_type = "ipic"; | |
| }; | |
| par_io@1400 { | |
| reg = <1400 100>; | |
| device_type = "par_io"; | |
| num-ports = <7>; | |
| ucc_pin@01 { | |
| linux,phandle = <140001>; | |
| pio-map = < | |
| /* port pin dir open_drain assignment has_irq */ | |
| 0 3 1 0 1 0 /* TxD0 */ | |
| 0 4 1 0 1 0 /* TxD1 */ | |
| 0 5 1 0 1 0 /* TxD2 */ | |
| 0 6 1 0 1 0 /* TxD3 */ | |
| 1 6 1 0 3 0 /* TxD4 */ | |
| 1 7 1 0 1 0 /* TxD5 */ | |
| 1 9 1 0 2 0 /* TxD6 */ | |
| 1 a 1 0 2 0 /* TxD7 */ | |
| 0 9 2 0 1 0 /* RxD0 */ | |
| 0 a 2 0 1 0 /* RxD1 */ | |
| 0 b 2 0 1 0 /* RxD2 */ | |
| 0 c 2 0 1 0 /* RxD3 */ | |
| 0 d 2 0 1 0 /* RxD4 */ | |
| 1 1 2 0 2 0 /* RxD5 */ | |
| 1 0 2 0 2 0 /* RxD6 */ | |
| 1 4 2 0 2 0 /* RxD7 */ | |
| 0 7 1 0 1 0 /* TX_EN */ | |
| 0 8 1 0 1 0 /* TX_ER */ | |
| 0 f 2 0 1 0 /* RX_DV */ | |
| 0 10 2 0 1 0 /* RX_ER */ | |
| 0 0 2 0 1 0 /* RX_CLK */ | |
| 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ | |
| 2 8 2 0 1 0>; /* GTX125 - CLK9 */ | |
| }; | |
| ucc_pin@02 { | |
| linux,phandle = <140002>; | |
| pio-map = < | |
| /* port pin dir open_drain assignment has_irq */ | |
| 0 11 1 0 1 0 /* TxD0 */ | |
| 0 12 1 0 1 0 /* TxD1 */ | |
| 0 13 1 0 1 0 /* TxD2 */ | |
| 0 14 1 0 1 0 /* TxD3 */ | |
| 1 2 1 0 1 0 /* TxD4 */ | |
| 1 3 1 0 2 0 /* TxD5 */ | |
| 1 5 1 0 3 0 /* TxD6 */ | |
| 1 8 1 0 3 0 /* TxD7 */ | |
| 0 17 2 0 1 0 /* RxD0 */ | |
| 0 18 2 0 1 0 /* RxD1 */ | |
| 0 19 2 0 1 0 /* RxD2 */ | |
| 0 1a 2 0 1 0 /* RxD3 */ | |
| 0 1b 2 0 1 0 /* RxD4 */ | |
| 1 c 2 0 2 0 /* RxD5 */ | |
| 1 d 2 0 3 0 /* RxD6 */ | |
| 1 b 2 0 2 0 /* RxD7 */ | |
| 0 15 1 0 1 0 /* TX_EN */ | |
| 0 16 1 0 1 0 /* TX_ER */ | |
| 0 1d 2 0 1 0 /* RX_DV */ | |
| 0 1e 2 0 1 0 /* RX_ER */ | |
| 0 1f 2 0 1 0 /* RX_CLK */ | |
| 2 2 1 0 2 0 /* GTX_CLK - CLK10 */ | |
| 2 3 2 0 1 0 /* GTX125 - CLK4 */ | |
| 0 1 3 0 2 0 /* MDIO */ | |
| 0 2 1 0 1 0>; /* MDC */ | |
| }; | |
| }; | |
| }; | |
| qe@e0100000 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| device_type = "qe"; | |
| model = "QE"; | |
| ranges = <0 e0100000 00100000>; | |
| reg = <e0100000 480>; | |
| brg-frequency = <0>; | |
| bus-frequency = <179A7B00>; | |
| muram@10000 { | |
| device_type = "muram"; | |
| ranges = <0 00010000 0000c000>; | |
| data-only@0{ | |
| reg = <0 c000>; | |
| }; | |
| }; | |
| spi@4c0 { | |
| device_type = "spi"; | |
| compatible = "fsl_spi"; | |
| reg = <4c0 40>; | |
| interrupts = <2>; | |
| interrupt-parent = <80>; | |
| mode = "cpu"; | |
| }; | |
| spi@500 { | |
| device_type = "spi"; | |
| compatible = "fsl_spi"; | |
| reg = <500 40>; | |
| interrupts = <1>; | |
| interrupt-parent = <80>; | |
| mode = "cpu"; | |
| }; | |
| usb@6c0 { | |
| device_type = "usb"; | |
| compatible = "qe_udc"; | |
| reg = <6c0 40 8B00 100>; | |
| interrupts = <b>; | |
| interrupt-parent = <80>; | |
| mode = "slave"; | |
| }; | |
| ucc@2000 { | |
| device_type = "network"; | |
| compatible = "ucc_geth"; | |
| model = "UCC"; | |
| device-id = <1>; | |
| reg = <2000 200>; | |
| interrupts = <20>; | |
| interrupt-parent = <80>; | |
| mac-address = [ 00 04 9f 00 23 23 ]; | |
| rx-clock = <0>; | |
| tx-clock = <19>; | |
| phy-handle = <212000>; | |
| pio-handle = <140001>; | |
| }; | |
| ucc@3000 { | |
| device_type = "network"; | |
| compatible = "ucc_geth"; | |
| model = "UCC"; | |
| device-id = <2>; | |
| reg = <3000 200>; | |
| interrupts = <21>; | |
| interrupt-parent = <80>; | |
| mac-address = [ 00 11 22 33 44 55 ]; | |
| rx-clock = <0>; | |
| tx-clock = <14>; | |
| phy-handle = <212001>; | |
| pio-handle = <140002>; | |
| }; | |
| mdio@2120 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <2120 18>; | |
| device_type = "mdio"; | |
| compatible = "ucc_geth_phy"; | |
| ethernet-phy@00 { | |
| linux,phandle = <212000>; | |
| interrupt-parent = <700>; | |
| interrupts = <11 2>; | |
| reg = <0>; | |
| device_type = "ethernet-phy"; | |
| interface = <6>; //ENET_1000_GMII | |
| }; | |
| ethernet-phy@01 { | |
| linux,phandle = <212001>; | |
| interrupt-parent = <700>; | |
| interrupts = <12 2>; | |
| reg = <1>; | |
| device_type = "ethernet-phy"; | |
| interface = <6>; | |
| }; | |
| }; | |
| qeic@80 { | |
| linux,phandle = <80>; | |
| interrupt-controller; | |
| device_type = "qeic"; | |
| #address-cells = <0>; | |
| #interrupt-cells = <1>; | |
| reg = <80 80>; | |
| built-in; | |
| big-endian; | |
| interrupts = <20 8 21 8>; //high:32 low:33 | |
| interrupt-parent = <700>; | |
| }; | |
| }; | |
| }; |