arch/powerpc/platforms/cell/pervasive.c

/*
 * CBE Pervasive Monitor and Debug
 *
 * (C) Copyright IBM Corporation 2005
 *
 * Authors: Maximino Aguilar (maguilar@us.ibm.com)
 *          Michael N. Day (mnday@us.ibm.com)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#undef DEBUG

#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/percpu.h>
#include <linux/types.h>
#include <linux/kallsyms.h>

#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/pgtable.h>
#include <asm/reg.h>

#include "pervasive.h"
#include "cbe_regs.h"

static DEFINE_SPINLOCK(cbe_pervasive_lock);

static void __init cbe_enable_pause_zero(void)
{
	unsigned long thread_switch_control;
	unsigned long temp_register;
	struct cbe_pmd_regs __iomem *pregs;

	spin_lock_irq(&cbe_pervasive_lock);
	pregs = cbe_get_cpu_pmd_regs(smp_processor_id());
	if (pregs == NULL)
		goto out;

	pr_debug("Power Management: CPU %d\n", smp_processor_id());

	 /* Enable Pause(0) control bit */
	temp_register = in_be64(&pregs->pm_control);

	out_be64(&pregs->pm_control,
		 temp_register | CBE_PMD_PAUSE_ZERO_CONTROL);

	/* Enable DEC and EE interrupt request */
	thread_switch_control  = mfspr(SPRN_TSC_CELL);
	thread_switch_control |= TSC_CELL_EE_ENABLE | TSC_CELL_EE_BOOST;

	switch ((mfspr(SPRN_CTRLF) & CTRL_CT)) {
	case CTRL_CT0:
		thread_switch_control |= TSC_CELL_DEC_ENABLE_0;
		break;
	case CTRL_CT1:
		thread_switch_control |= TSC_CELL_DEC_ENABLE_1;
		break;
	default:
		printk(KERN_WARNING "%s: unknown configuration\n",
			__FUNCTION__);
		break;
	}

	mtspr(SPRN_TSC_CELL, thread_switch_control);

out:
	spin_unlock_irq(&cbe_pervasive_lock);
}

static void cbe_idle(void)
{
	unsigned long ctrl;

	/* Why do we do that on every idle ? Couldn't that be done once for
	 * all or do we lose the state some way ? Also, the pm_control
	 * register setting, that can't be set once at boot ? We really want
	 * to move that away in order to implement a simple powersave
	 */
	cbe_enable_pause_zero();

	while (1) {
		if (!need_resched()) {
			local_irq_disable();
			while (!need_resched()) {
				/* go into low thread priority */
				HMT_low();

				/*
				 * atomically disable thread execution
				 * and runlatch.
				 * External and Decrementer exceptions
				 * are still handled when the thread
				 * is disabled but now enter in
				 * cbe_system_reset_exception()
				 */
				ctrl = mfspr(SPRN_CTRLF);
				ctrl &= ~(CTRL_RUNLATCH | CTRL_TE);
				mtspr(SPRN_CTRLT, ctrl);
			}
			/* restore thread prio */
			HMT_medium();
			local_irq_enable();
		}

		/*
		 * turn runlatch on again before scheduling the
		 * process we just woke up
		 */
		ppc64_runlatch_on();

		preempt_enable_no_resched();
		schedule();
		preempt_disable();
	}
}

static int cbe_system_reset_exception(struct pt_regs *regs)
{
	switch (regs->msr & SRR1_WAKEMASK) {
	case SRR1_WAKEEE:
		do_IRQ(regs);
		break;
	case SRR1_WAKEDEC:
		timer_interrupt(regs);
		break;
	case SRR1_WAKEMT:
		break;
#ifdef CONFIG_CBE_RAS
	case SRR1_WAKESYSERR:
		cbe_system_error_exception(regs);
		break;
	case SRR1_WAKETHERM:
		cbe_thermal_exception(regs);
		break;
#endif /* CONFIG_CBE_RAS */
	default:
		/* do system reset */
		return 0;
	}
	/* everything handled */
	return 1;
}

void __init cbe_pervasive_init(void)
{
	if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
		return;

	ppc_md.idle_loop = cbe_idle;
	ppc_md.system_reset_exception = cbe_system_reset_exception;
}