| /* | |
| * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. | |
| * | |
| * Authors: Shlomi Gridish <gridish@freescale.com> | |
| * Li Yang <leoli@freescale.com> | |
| * | |
| * Description: | |
| * QE UCC Slow API Set - UCC Slow specific routines implementations. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/errno.h> | |
| #include <linux/slab.h> | |
| #include <linux/stddef.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/irq.h> | |
| #include <asm/io.h> | |
| #include <asm/immap_qe.h> | |
| #include <asm/qe.h> | |
| #include <asm/ucc.h> | |
| #include <asm/ucc_slow.h> | |
| #define uccs_printk(level, format, arg...) \ | |
| printk(level format "\n", ## arg) | |
| #define uccs_dbg(format, arg...) \ | |
| uccs_printk(KERN_DEBUG , format , ## arg) | |
| #define uccs_err(format, arg...) \ | |
| uccs_printk(KERN_ERR , format , ## arg) | |
| #define uccs_info(format, arg...) \ | |
| uccs_printk(KERN_INFO , format , ## arg) | |
| #define uccs_warn(format, arg...) \ | |
| uccs_printk(KERN_WARNING , format , ## arg) | |
| #ifdef UCCS_VERBOSE_DEBUG | |
| #define uccs_vdbg uccs_dbg | |
| #else | |
| #define uccs_vdbg(fmt, args...) do { } while (0) | |
| #endif /* UCCS_VERBOSE_DEBUG */ | |
| u32 ucc_slow_get_qe_cr_subblock(int uccs_num) | |
| { | |
| switch (uccs_num) { | |
| case 0: return QE_CR_SUBBLOCK_UCCSLOW1; | |
| case 1: return QE_CR_SUBBLOCK_UCCSLOW2; | |
| case 2: return QE_CR_SUBBLOCK_UCCSLOW3; | |
| case 3: return QE_CR_SUBBLOCK_UCCSLOW4; | |
| case 4: return QE_CR_SUBBLOCK_UCCSLOW5; | |
| case 5: return QE_CR_SUBBLOCK_UCCSLOW6; | |
| case 6: return QE_CR_SUBBLOCK_UCCSLOW7; | |
| case 7: return QE_CR_SUBBLOCK_UCCSLOW8; | |
| default: return QE_CR_SUBBLOCK_INVALID; | |
| } | |
| } | |
| void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs) | |
| { | |
| out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD); | |
| } | |
| void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs) | |
| { | |
| struct ucc_slow_info *us_info = uccs->us_info; | |
| u32 id; | |
| id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); | |
| qe_issue_cmd(QE_GRACEFUL_STOP_TX, id, | |
| QE_CR_PROTOCOL_UNSPECIFIED, 0); | |
| } | |
| void ucc_slow_stop_tx(struct ucc_slow_private * uccs) | |
| { | |
| struct ucc_slow_info *us_info = uccs->us_info; | |
| u32 id; | |
| id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); | |
| qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); | |
| } | |
| void ucc_slow_restart_tx(struct ucc_slow_private * uccs) | |
| { | |
| struct ucc_slow_info *us_info = uccs->us_info; | |
| u32 id; | |
| id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); | |
| qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); | |
| } | |
| void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode) | |
| { | |
| struct ucc_slow *us_regs; | |
| u32 gumr_l; | |
| us_regs = uccs->us_regs; | |
| /* Enable reception and/or transmission on this UCC. */ | |
| gumr_l = in_be32(&us_regs->gumr_l); | |
| if (mode & COMM_DIR_TX) { | |
| gumr_l |= UCC_SLOW_GUMR_L_ENT; | |
| uccs->enabled_tx = 1; | |
| } | |
| if (mode & COMM_DIR_RX) { | |
| gumr_l |= UCC_SLOW_GUMR_L_ENR; | |
| uccs->enabled_rx = 1; | |
| } | |
| out_be32(&us_regs->gumr_l, gumr_l); | |
| } | |
| void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) | |
| { | |
| struct ucc_slow *us_regs; | |
| u32 gumr_l; | |
| us_regs = uccs->us_regs; | |
| /* Disable reception and/or transmission on this UCC. */ | |
| gumr_l = in_be32(&us_regs->gumr_l); | |
| if (mode & COMM_DIR_TX) { | |
| gumr_l &= ~UCC_SLOW_GUMR_L_ENT; | |
| uccs->enabled_tx = 0; | |
| } | |
| if (mode & COMM_DIR_RX) { | |
| gumr_l &= ~UCC_SLOW_GUMR_L_ENR; | |
| uccs->enabled_rx = 0; | |
| } | |
| out_be32(&us_regs->gumr_l, gumr_l); | |
| } | |
| int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret) | |
| { | |
| u32 i; | |
| struct ucc_slow *us_regs; | |
| u32 gumr; | |
| u8 function_code = 0; | |
| u8 *bd; | |
| struct ucc_slow_private *uccs; | |
| u32 id; | |
| u32 command; | |
| int ret; | |
| uccs_vdbg("%s: IN", __FUNCTION__); | |
| if (!us_info) | |
| return -EINVAL; | |
| /* check if the UCC port number is in range. */ | |
| if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { | |
| uccs_err("ucc_slow_init: Illegal UCC number!"); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Set mrblr | |
| * Check that 'max_rx_buf_length' is properly aligned (4), unless | |
| * rfw is 1, meaning that QE accepts one byte at a time, unlike normal | |
| * case when QE accepts 32 bits at a time. | |
| */ | |
| if ((!us_info->rfw) && | |
| (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) { | |
| uccs_err("max_rx_buf_length not aligned."); | |
| return -EINVAL; | |
| } | |
| uccs = (struct ucc_slow_private *) | |
| kmalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); | |
| if (!uccs) { | |
| uccs_err | |
| ("ucc_slow_init: No memory for UCC slow data structure!"); | |
| return -ENOMEM; | |
| } | |
| memset(uccs, 0, sizeof(struct ucc_slow_private)); | |
| /* Fill slow UCC structure */ | |
| uccs->us_info = us_info; | |
| uccs->saved_uccm = 0; | |
| uccs->p_rx_frame = 0; | |
| uccs->us_regs = us_info->us_regs; | |
| us_regs = uccs->us_regs; | |
| uccs->p_ucce = (u16 *) & (us_regs->ucce); | |
| uccs->p_uccm = (u16 *) & (us_regs->uccm); | |
| #ifdef STATISTICS | |
| uccs->rx_frames = 0; | |
| uccs->tx_frames = 0; | |
| uccs->rx_discarded = 0; | |
| #endif /* STATISTICS */ | |
| /* Get PRAM base */ | |
| uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE, | |
| ALIGNMENT_OF_UCC_SLOW_PRAM); | |
| if (IS_MURAM_ERR(uccs->us_pram_offset)) { | |
| uccs_err | |
| ("ucc_slow_init: Can not allocate MURAM memory " | |
| "for Slow UCC."); | |
| ucc_slow_free(uccs); | |
| return -ENOMEM; | |
| } | |
| id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); | |
| qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED, | |
| (u32) uccs->us_pram_offset); | |
| uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); | |
| /* Init Guemr register */ | |
| if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) { | |
| uccs_err("ucc_slow_init: Could not init the guemr register."); | |
| ucc_slow_free(uccs); | |
| return ret; | |
| } | |
| /* Set UCC to slow type */ | |
| if ((ret = ucc_set_type(us_info->ucc_num, | |
| (struct ucc_common *) (us_info->us_regs), | |
| UCC_SPEED_TYPE_SLOW))) { | |
| uccs_err("ucc_slow_init: Could not init the guemr register."); | |
| ucc_slow_free(uccs); | |
| return ret; | |
| } | |
| out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length); | |
| INIT_LIST_HEAD(&uccs->confQ); | |
| /* Allocate BDs. */ | |
| uccs->rx_base_offset = | |
| qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd), | |
| QE_ALIGNMENT_OF_BD); | |
| if (IS_MURAM_ERR(uccs->rx_base_offset)) { | |
| uccs_err("ucc_slow_init: No memory for Rx BD's."); | |
| uccs->rx_base_offset = 0; | |
| ucc_slow_free(uccs); | |
| return -ENOMEM; | |
| } | |
| uccs->tx_base_offset = | |
| qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd), | |
| QE_ALIGNMENT_OF_BD); | |
| if (IS_MURAM_ERR(uccs->tx_base_offset)) { | |
| uccs_err("ucc_slow_init: No memory for Tx BD's."); | |
| uccs->tx_base_offset = 0; | |
| ucc_slow_free(uccs); | |
| return -ENOMEM; | |
| } | |
| /* Init Tx bds */ | |
| bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset); | |
| for (i = 0; i < us_info->tx_bd_ring_len; i++) { | |
| /* clear bd buffer */ | |
| out_be32(&(((struct qe_bd *)bd)->buf), 0); | |
| /* set bd status and length */ | |
| out_be32((u32*)bd, 0); | |
| bd += sizeof(struct qe_bd); | |
| } | |
| bd -= sizeof(struct qe_bd); | |
| /* set bd status and length */ | |
| out_be32((u32*)bd, T_W); /* for last BD set Wrap bit */ | |
| /* Init Rx bds */ | |
| bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset); | |
| for (i = 0; i < us_info->rx_bd_ring_len; i++) { | |
| /* set bd status and length */ | |
| out_be32((u32*)bd, 0); | |
| /* clear bd buffer */ | |
| out_be32(&(((struct qe_bd *)bd)->buf), 0); | |
| bd += sizeof(struct qe_bd); | |
| } | |
| bd -= sizeof(struct qe_bd); | |
| /* set bd status and length */ | |
| out_be32((u32*)bd, R_W); /* for last BD set Wrap bit */ | |
| /* Set GUMR (For more details see the hardware spec.). */ | |
| /* gumr_h */ | |
| gumr = 0; | |
| gumr |= us_info->tcrc; | |
| if (us_info->cdp) | |
| gumr |= UCC_SLOW_GUMR_H_CDP; | |
| if (us_info->ctsp) | |
| gumr |= UCC_SLOW_GUMR_H_CTSP; | |
| if (us_info->cds) | |
| gumr |= UCC_SLOW_GUMR_H_CDS; | |
| if (us_info->ctss) | |
| gumr |= UCC_SLOW_GUMR_H_CTSS; | |
| if (us_info->tfl) | |
| gumr |= UCC_SLOW_GUMR_H_TFL; | |
| if (us_info->rfw) | |
| gumr |= UCC_SLOW_GUMR_H_RFW; | |
| if (us_info->txsy) | |
| gumr |= UCC_SLOW_GUMR_H_TXSY; | |
| if (us_info->rtsm) | |
| gumr |= UCC_SLOW_GUMR_H_RTSM; | |
| out_be32(&us_regs->gumr_h, gumr); | |
| /* gumr_l */ | |
| gumr = 0; | |
| if (us_info->tci) | |
| gumr |= UCC_SLOW_GUMR_L_TCI; | |
| if (us_info->rinv) | |
| gumr |= UCC_SLOW_GUMR_L_RINV; | |
| if (us_info->tinv) | |
| gumr |= UCC_SLOW_GUMR_L_TINV; | |
| if (us_info->tend) | |
| gumr |= UCC_SLOW_GUMR_L_TEND; | |
| gumr |= us_info->tdcr; | |
| gumr |= us_info->rdcr; | |
| gumr |= us_info->tenc; | |
| gumr |= us_info->renc; | |
| gumr |= us_info->diag; | |
| gumr |= us_info->mode; | |
| out_be32(&us_regs->gumr_l, gumr); | |
| /* Function code registers */ | |
| /* function_code has initial value 0 */ | |
| /* if the data is in cachable memory, the 'global' */ | |
| /* in the function code should be set. */ | |
| function_code |= us_info->data_mem_part; | |
| function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */ | |
| uccs->us_pram->tfcr = function_code; | |
| uccs->us_pram->rfcr = function_code; | |
| /* rbase, tbase are offsets from MURAM base */ | |
| out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset); | |
| out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset); | |
| /* Mux clocking */ | |
| /* Grant Support */ | |
| ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support); | |
| /* Breakpoint Support */ | |
| ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support); | |
| /* Set Tsa or NMSI mode. */ | |
| ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa); | |
| /* If NMSI (not Tsa), set Tx and Rx clock. */ | |
| if (!us_info->tsa) { | |
| /* Rx clock routing */ | |
| if (ucc_set_qe_mux_rxtx | |
| (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) { | |
| uccs_err | |
| ("ucc_slow_init: Illegal value for parameter" | |
| " 'RxClock'."); | |
| ucc_slow_free(uccs); | |
| return -EINVAL; | |
| } | |
| /* Tx clock routing */ | |
| if (ucc_set_qe_mux_rxtx(us_info->ucc_num, | |
| us_info->tx_clock, COMM_DIR_TX)) { | |
| uccs_err | |
| ("ucc_slow_init: Illegal value for parameter " | |
| "'TxClock'."); | |
| ucc_slow_free(uccs); | |
| return -EINVAL; | |
| } | |
| } | |
| /* | |
| * INTERRUPTS | |
| */ | |
| /* Set interrupt mask register at UCC level. */ | |
| out_be16(&us_regs->uccm, us_info->uccm_mask); | |
| /* First, clear anything pending at UCC level, */ | |
| /* otherwise, old garbage may come through */ | |
| /* as soon as the dam is opened. */ | |
| /* Writing '1' clears */ | |
| out_be16(&us_regs->ucce, 0xffff); | |
| /* Issue QE Init command */ | |
| if (us_info->init_tx && us_info->init_rx) | |
| command = QE_INIT_TX_RX; | |
| else if (us_info->init_tx) | |
| command = QE_INIT_TX; | |
| else | |
| command = QE_INIT_RX; /* We know at least one is TRUE */ | |
| id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); | |
| qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); | |
| *uccs_ret = uccs; | |
| return 0; | |
| } | |
| void ucc_slow_free(struct ucc_slow_private * uccs) | |
| { | |
| if (!uccs) | |
| return; | |
| if (uccs->rx_base_offset) | |
| qe_muram_free(uccs->rx_base_offset); | |
| if (uccs->tx_base_offset) | |
| qe_muram_free(uccs->tx_base_offset); | |
| if (uccs->us_pram) { | |
| qe_muram_free(uccs->us_pram_offset); | |
| uccs->us_pram = NULL; | |
| } | |
| kfree(uccs); | |
| } |