| /* | |
| * Architecture- / platform-specific boot-time initialization code for | |
| * IBM PowerPC 4xx based boards. Adapted from original | |
| * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek | |
| * <dan@net4x.com>. | |
| * | |
| * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> | |
| * | |
| * 2002 (c) MontaVista, Software, Inc. This file is licensed under | |
| * the terms of the GNU General Public License version 2. This program | |
| * is licensed "as is" without any warranty of any kind, whether express | |
| * or implied. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/smp.h> | |
| #include <linux/threads.h> | |
| #include <linux/param.h> | |
| #include <linux/string.h> | |
| #include <linux/pci.h> | |
| #include <linux/rtc.h> | |
| #include <asm/system.h> | |
| #include <asm/pci-bridge.h> | |
| #include <asm/machdep.h> | |
| #include <asm/page.h> | |
| #include <asm/time.h> | |
| #include <asm/io.h> | |
| #include <asm/ocp.h> | |
| #include <asm/ibm_ocp_pci.h> | |
| #include <asm/todc.h> | |
| #undef DEBUG | |
| #ifdef DEBUG | |
| #define DBG(x...) printk(x) | |
| #else | |
| #define DBG(x...) | |
| #endif | |
| void *kb_cs; | |
| void *kb_data; | |
| void *walnut_rtc_base; | |
| /* Some IRQs unique to Walnut. | |
| * Used by the generic 405 PCI setup functions in ppc4xx_pci.c | |
| */ | |
| int __init | |
| ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) | |
| { | |
| static char pci_irq_table[][4] = | |
| /* | |
| * PCI IDSEL/INTPIN->INTLINE | |
| * A B C D | |
| */ | |
| { | |
| {28, 28, 28, 28}, /* IDSEL 1 - PCI slot 1 */ | |
| {29, 29, 29, 29}, /* IDSEL 2 - PCI slot 2 */ | |
| {30, 30, 30, 30}, /* IDSEL 3 - PCI slot 3 */ | |
| {31, 31, 31, 31}, /* IDSEL 4 - PCI slot 4 */ | |
| }; | |
| const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4; | |
| return PCI_IRQ_TABLE_LOOKUP; | |
| }; | |
| void __init | |
| walnut_setup_arch(void) | |
| { | |
| void *fpga_brdc; | |
| unsigned char fpga_brdc_data; | |
| void *fpga_enable; | |
| void *fpga_polarity; | |
| void *fpga_status; | |
| void *fpga_trigger; | |
| ppc4xx_setup_arch(); | |
| ibm_ocp_set_emac(0, 0); | |
| kb_data = ioremap(WALNUT_PS2_BASE, 8); | |
| if (!kb_data) { | |
| printk(KERN_CRIT | |
| "walnut_setup_arch() kb_data ioremap failed\n"); | |
| return; | |
| } | |
| kb_cs = kb_data + 1; | |
| fpga_status = ioremap(PPC40x_FPGA_BASE, 8); | |
| if (!fpga_status) { | |
| printk(KERN_CRIT | |
| "walnut_setup_arch() fpga_status ioremap failed\n"); | |
| return; | |
| } | |
| fpga_enable = fpga_status + 1; | |
| fpga_polarity = fpga_status + 2; | |
| fpga_trigger = fpga_status + 3; | |
| fpga_brdc = fpga_status + 4; | |
| /* split the keyboard and mouse interrupts */ | |
| fpga_brdc_data = readb(fpga_brdc); | |
| fpga_brdc_data |= 0x80; | |
| writeb(fpga_brdc_data, fpga_brdc); | |
| writeb(0x3, fpga_enable); | |
| writeb(0x3, fpga_polarity); | |
| writeb(0x3, fpga_trigger); | |
| /* RTC step for the walnut */ | |
| walnut_rtc_base = (void *) WALNUT_RTC_VADDR; | |
| TODC_INIT(TODC_TYPE_DS1743, walnut_rtc_base, walnut_rtc_base, | |
| walnut_rtc_base, 8); | |
| /* Identify the system */ | |
| printk("IBM Walnut port (C) 2000-2002 MontaVista Software, Inc. (source@mvista.com)\n"); | |
| } | |
| void __init | |
| bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) | |
| { | |
| #ifdef CONFIG_PCI | |
| unsigned int bar_response, bar; | |
| /* | |
| * Expected PCI mapping: | |
| * | |
| * PLB addr PCI memory addr | |
| * --------------------- --------------------- | |
| * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff | |
| * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff | |
| * | |
| * PLB addr PCI io addr | |
| * --------------------- --------------------- | |
| * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000 | |
| * | |
| * The following code is simplified by assuming that the bootrom | |
| * has been well behaved in following this mapping. | |
| */ | |
| #ifdef DEBUG | |
| int i; | |
| printk("ioremap PCLIO_BASE = 0x%x\n", pcip); | |
| printk("PCI bridge regs before fixup \n"); | |
| for (i = 0; i <= 3; i++) { | |
| printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); | |
| printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); | |
| printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila))); | |
| printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha))); | |
| } | |
| printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); | |
| printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); | |
| printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); | |
| printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); | |
| #endif | |
| /* added for IBM boot rom version 1.15 bios bar changes -AK */ | |
| /* Disable region first */ | |
| out_le32((void *) &(pcip->pmm[0].ma), 0x00000000); | |
| /* PLB starting addr, PCI: 0x80000000 */ | |
| out_le32((void *) &(pcip->pmm[0].la), 0x80000000); | |
| /* PCI start addr, 0x80000000 */ | |
| out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE); | |
| /* 512MB range of PLB to PCI */ | |
| out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000); | |
| /* Enable no pre-fetch, enable region */ | |
| out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff - | |
| (PPC405_PCI_UPPER_MEM - | |
| PPC405_PCI_MEM_BASE)) | 0x01)); | |
| /* Disable region one */ | |
| out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); | |
| out_le32((void *) &(pcip->pmm[1].la), 0x00000000); | |
| out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000); | |
| out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000); | |
| out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); | |
| out_le32((void *) &(pcip->ptm1ms), 0x00000000); | |
| /* Disable region two */ | |
| out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); | |
| out_le32((void *) &(pcip->pmm[2].la), 0x00000000); | |
| out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000); | |
| out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000); | |
| out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); | |
| out_le32((void *) &(pcip->ptm2ms), 0x00000000); | |
| /* Zero config bars */ | |
| for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { | |
| early_write_config_dword(hose, hose->first_busno, | |
| PCI_FUNC(hose->first_busno), bar, | |
| 0x00000000); | |
| early_read_config_dword(hose, hose->first_busno, | |
| PCI_FUNC(hose->first_busno), bar, | |
| &bar_response); | |
| DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n", | |
| hose->first_busno, PCI_SLOT(hose->first_busno), | |
| PCI_FUNC(hose->first_busno), bar, bar_response); | |
| } | |
| /* end work arround */ | |
| #ifdef DEBUG | |
| printk("PCI bridge regs after fixup \n"); | |
| for (i = 0; i <= 3; i++) { | |
| printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma))); | |
| printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la))); | |
| printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila))); | |
| printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha))); | |
| } | |
| printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms))); | |
| printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la))); | |
| printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms))); | |
| printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la))); | |
| #endif | |
| #endif | |
| } | |
| void __init | |
| walnut_map_io(void) | |
| { | |
| ppc4xx_map_io(); | |
| io_block_mapping(WALNUT_RTC_VADDR, | |
| WALNUT_RTC_PADDR, WALNUT_RTC_SIZE, _PAGE_IO); | |
| } | |
| void __init | |
| platform_init(unsigned long r3, unsigned long r4, unsigned long r5, | |
| unsigned long r6, unsigned long r7) | |
| { | |
| ppc4xx_init(r3, r4, r5, r6, r7); | |
| ppc_md.setup_arch = walnut_setup_arch; | |
| ppc_md.setup_io_mappings = walnut_map_io; | |
| #ifdef CONFIG_GEN_RTC | |
| ppc_md.time_init = todc_time_init; | |
| ppc_md.set_rtc_time = todc_set_rtc_time; | |
| ppc_md.get_rtc_time = todc_get_rtc_time; | |
| ppc_md.nvram_read_val = todc_direct_read_val; | |
| ppc_md.nvram_write_val = todc_direct_write_val; | |
| #endif | |
| } |