| /* | |
| * Board setup routines for the Motorola MVME5100. | |
| * | |
| * Author: Matt Porter <mporter@mvista.com> | |
| * | |
| * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under | |
| * the terms of the GNU General Public License version 2. This program | |
| * is licensed "as is" without any warranty of any kind, whether express | |
| * or implied. | |
| */ | |
| #include <linux/stddef.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/errno.h> | |
| #include <linux/pci.h> | |
| #include <linux/initrd.h> | |
| #include <linux/console.h> | |
| #include <linux/delay.h> | |
| #include <linux/ide.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/kdev_t.h> | |
| #include <linux/root_dev.h> | |
| #include <asm/system.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/page.h> | |
| #include <asm/dma.h> | |
| #include <asm/io.h> | |
| #include <asm/machdep.h> | |
| #include <asm/open_pic.h> | |
| #include <asm/i8259.h> | |
| #include <asm/todc.h> | |
| #include <asm/pci-bridge.h> | |
| #include <asm/bootinfo.h> | |
| #include <asm/hawk.h> | |
| #include <platforms/pplus.h> | |
| #include <platforms/mvme5100.h> | |
| static u_char mvme5100_openpic_initsenses[16] __initdata = { | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* i8259 cascade */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* TL16C550 UART 1,2 */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet1 front panel or P2 */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Hawk Watchdog 1,2 */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* DS1621 thermal alarm */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT0# */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT1# */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT2# */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT3# */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTA#, PMC2 INTB# */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTB#, PMC2 INTC# */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTC#, PMC2 INTD# */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTD#, PMC2 INTA# */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet 2 (front panel) */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Abort Switch */ | |
| (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* RTC Alarm */ | |
| }; | |
| static inline int | |
| mvme5100_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) | |
| { | |
| int irq; | |
| static char pci_irq_table[][4] = | |
| /* | |
| * PCI IDSEL/INTPIN->INTLINE | |
| * A B C D | |
| */ | |
| { | |
| { 0, 0, 0, 0 }, /* IDSEL 11 - Winbond */ | |
| { 0, 0, 0, 0 }, /* IDSEL 12 - unused */ | |
| { 21, 22, 23, 24 }, /* IDSEL 13 - Universe II */ | |
| { 18, 0, 0, 0 }, /* IDSEL 14 - Enet 1 */ | |
| { 0, 0, 0, 0 }, /* IDSEL 15 - unused */ | |
| { 25, 26, 27, 28 }, /* IDSEL 16 - PMC Slot 1 */ | |
| { 28, 25, 26, 27 }, /* IDSEL 17 - PMC Slot 2 */ | |
| { 0, 0, 0, 0 }, /* IDSEL 18 - unused */ | |
| { 29, 0, 0, 0 }, /* IDSEL 19 - Enet 2 */ | |
| { 0, 0, 0, 0 }, /* IDSEL 20 - PMCSPAN */ | |
| }; | |
| const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4; | |
| irq = PCI_IRQ_TABLE_LOOKUP; | |
| /* If lookup is zero, always return 0 */ | |
| if (!irq) | |
| return 0; | |
| else | |
| #ifdef CONFIG_MVME5100_IPMC761_PRESENT | |
| /* If IPMC761 present, return table value */ | |
| return irq; | |
| #else | |
| /* If IPMC761 not present, we don't have an i8259 so adjust */ | |
| return (irq - NUM_8259_INTERRUPTS); | |
| #endif | |
| } | |
| static void | |
| mvme5100_pcibios_fixup_resources(struct pci_dev *dev) | |
| { | |
| int i; | |
| if ((dev->vendor == PCI_VENDOR_ID_MOTOROLA) && | |
| (dev->device == PCI_DEVICE_ID_MOTOROLA_HAWK)) | |
| for (i=0; i<DEVICE_COUNT_RESOURCE; i++) | |
| { | |
| dev->resource[i].start = 0; | |
| dev->resource[i].end = 0; | |
| } | |
| } | |
| static void __init | |
| mvme5100_setup_bridge(void) | |
| { | |
| struct pci_controller* hose; | |
| hose = pcibios_alloc_controller(); | |
| if (!hose) | |
| return; | |
| hose->first_busno = 0; | |
| hose->last_busno = 0xff; | |
| hose->pci_mem_offset = MVME5100_PCI_MEM_OFFSET; | |
| pci_init_resource(&hose->io_resource, MVME5100_PCI_LOWER_IO, | |
| MVME5100_PCI_UPPER_IO, IORESOURCE_IO, | |
| "PCI host bridge"); | |
| pci_init_resource(&hose->mem_resources[0], MVME5100_PCI_LOWER_MEM, | |
| MVME5100_PCI_UPPER_MEM, IORESOURCE_MEM, | |
| "PCI host bridge"); | |
| hose->io_space.start = MVME5100_PCI_LOWER_IO; | |
| hose->io_space.end = MVME5100_PCI_UPPER_IO; | |
| hose->mem_space.start = MVME5100_PCI_LOWER_MEM; | |
| hose->mem_space.end = MVME5100_PCI_UPPER_MEM; | |
| hose->io_base_virt = (void *)MVME5100_ISA_IO_BASE; | |
| /* Use indirect method of Hawk */ | |
| setup_indirect_pci(hose, MVME5100_PCI_CONFIG_ADDR, | |
| MVME5100_PCI_CONFIG_DATA); | |
| hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); | |
| ppc_md.pcibios_fixup_resources = mvme5100_pcibios_fixup_resources; | |
| ppc_md.pci_swizzle = common_swizzle; | |
| ppc_md.pci_map_irq = mvme5100_map_irq; | |
| } | |
| static void __init | |
| mvme5100_setup_arch(void) | |
| { | |
| if ( ppc_md.progress ) | |
| ppc_md.progress("mvme5100_setup_arch: enter", 0); | |
| loops_per_jiffy = 50000000 / HZ; | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| if (initrd_start) | |
| ROOT_DEV = Root_RAM0; | |
| else | |
| #endif | |
| #ifdef CONFIG_ROOT_NFS | |
| ROOT_DEV = Root_NFS; | |
| #else | |
| ROOT_DEV = Root_SDA2; | |
| #endif | |
| if ( ppc_md.progress ) | |
| ppc_md.progress("mvme5100_setup_arch: find_bridges", 0); | |
| /* Setup PCI host bridge */ | |
| mvme5100_setup_bridge(); | |
| /* Find and map our OpenPIC */ | |
| hawk_mpic_init(MVME5100_PCI_MEM_OFFSET); | |
| OpenPIC_InitSenses = mvme5100_openpic_initsenses; | |
| OpenPIC_NumInitSenses = sizeof(mvme5100_openpic_initsenses); | |
| printk("MVME5100 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n"); | |
| if ( ppc_md.progress ) | |
| ppc_md.progress("mvme5100_setup_arch: exit", 0); | |
| return; | |
| } | |
| static void __init | |
| mvme5100_init2(void) | |
| { | |
| #ifdef CONFIG_MVME5100_IPMC761_PRESENT | |
| request_region(0x00,0x20,"dma1"); | |
| request_region(0x20,0x20,"pic1"); | |
| request_region(0x40,0x20,"timer"); | |
| request_region(0x80,0x10,"dma page reg"); | |
| request_region(0xa0,0x20,"pic2"); | |
| request_region(0xc0,0x20,"dma2"); | |
| #endif | |
| return; | |
| } | |
| /* | |
| * Interrupt setup and service. | |
| * Have MPIC on HAWK and cascaded 8259s on Winbond cascaded to MPIC. | |
| */ | |
| static void __init | |
| mvme5100_init_IRQ(void) | |
| { | |
| #ifdef CONFIG_MVME5100_IPMC761_PRESENT | |
| int i; | |
| #endif | |
| if ( ppc_md.progress ) | |
| ppc_md.progress("init_irq: enter", 0); | |
| openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000); | |
| #ifdef CONFIG_MVME5100_IPMC761_PRESENT | |
| openpic_init(NUM_8259_INTERRUPTS); | |
| openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", | |
| &i8259_irq); | |
| i8259_init(0, 0); | |
| #else | |
| openpic_init(0); | |
| #endif | |
| if ( ppc_md.progress ) | |
| ppc_md.progress("init_irq: exit", 0); | |
| return; | |
| } | |
| /* | |
| * Set BAT 3 to map 0xf0000000 to end of physical memory space. | |
| */ | |
| static __inline__ void | |
| mvme5100_set_bat(void) | |
| { | |
| mb(); | |
| mtspr(SPRN_DBAT1U, 0xf0001ffe); | |
| mtspr(SPRN_DBAT1L, 0xf000002a); | |
| mb(); | |
| } | |
| static unsigned long __init | |
| mvme5100_find_end_of_memory(void) | |
| { | |
| return hawk_get_mem_size(MVME5100_HAWK_SMC_BASE); | |
| } | |
| static void __init | |
| mvme5100_map_io(void) | |
| { | |
| io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO); | |
| ioremap_base = 0xfe000000; | |
| } | |
| static void | |
| mvme5100_reset_board(void) | |
| { | |
| local_irq_disable(); | |
| /* Set exception prefix high - to the firmware */ | |
| _nmask_and_or_msr(0, MSR_IP); | |
| out_8((u_char *)MVME5100_BOARD_MODRST_REG, 0x01); | |
| return; | |
| } | |
| static void | |
| mvme5100_restart(char *cmd) | |
| { | |
| volatile ulong i = 10000000; | |
| mvme5100_reset_board(); | |
| while (i-- > 0); | |
| panic("restart failed\n"); | |
| } | |
| static void | |
| mvme5100_halt(void) | |
| { | |
| local_irq_disable(); | |
| while (1); | |
| } | |
| static void | |
| mvme5100_power_off(void) | |
| { | |
| mvme5100_halt(); | |
| } | |
| static int | |
| mvme5100_show_cpuinfo(struct seq_file *m) | |
| { | |
| seq_printf(m, "vendor\t\t: Motorola\n"); | |
| seq_printf(m, "machine\t\t: MVME5100\n"); | |
| return 0; | |
| } | |
| TODC_ALLOC(); | |
| void __init | |
| platform_init(unsigned long r3, unsigned long r4, unsigned long r5, | |
| unsigned long r6, unsigned long r7) | |
| { | |
| parse_bootinfo(find_bootinfo()); | |
| mvme5100_set_bat(); | |
| isa_io_base = MVME5100_ISA_IO_BASE; | |
| isa_mem_base = MVME5100_ISA_MEM_BASE; | |
| pci_dram_offset = MVME5100_PCI_DRAM_OFFSET; | |
| ppc_md.setup_arch = mvme5100_setup_arch; | |
| ppc_md.show_cpuinfo = mvme5100_show_cpuinfo; | |
| ppc_md.init_IRQ = mvme5100_init_IRQ; | |
| ppc_md.get_irq = openpic_get_irq; | |
| ppc_md.init = mvme5100_init2; | |
| ppc_md.restart = mvme5100_restart; | |
| ppc_md.power_off = mvme5100_power_off; | |
| ppc_md.halt = mvme5100_halt; | |
| ppc_md.find_end_of_memory = mvme5100_find_end_of_memory; | |
| ppc_md.setup_io_mappings = mvme5100_map_io; | |
| TODC_INIT(TODC_TYPE_MK48T37, MVME5100_NVRAM_AS0, MVME5100_NVRAM_AS1, | |
| MVME5100_NVRAM_DATA, 8); | |
| ppc_md.time_init = todc_time_init; | |
| ppc_md.set_rtc_time = todc_set_rtc_time; | |
| ppc_md.get_rtc_time = todc_get_rtc_time; | |
| ppc_md.calibrate_decr = todc_calibrate_decr; | |
| ppc_md.nvram_read_val = todc_m48txx_read_val; | |
| ppc_md.nvram_write_val = todc_m48txx_write_val; | |
| } |