| /* | |
| * A collection of structures, addresses, and values associated with | |
| * the Motorola MPC8260ADS/MPC8266ADS-PCI boards. | |
| * Copied from the RPX-Classic and SBS8260 stuff. | |
| * | |
| * Copyright (c) 2001 Dan Malek (dan@mvista.com) | |
| */ | |
| #ifdef __KERNEL__ | |
| #ifndef __MACH_ADS8260_DEFS | |
| #define __MACH_ADS8260_DEFS | |
| #include <asm/ppcboot.h> | |
| #if defined(CONFIG_ADS8272) | |
| #define BOARD_CHIP_NAME "8272" | |
| #endif | |
| /* Memory map is configured by the PROM startup. | |
| * We just map a few things we need. The CSR is actually 4 byte-wide | |
| * registers that can be accessed as 8-, 16-, or 32-bit values. | |
| */ | |
| #define CPM_MAP_ADDR ((uint)0xf0000000) | |
| #define BCSR_ADDR ((uint)0xf4500000) | |
| #define BCSR_SIZE ((uint)(32 * 1024)) | |
| #define BOOTROM_RESTART_ADDR ((uint)0xff000104) | |
| /* For our show_cpuinfo hooks. */ | |
| #define CPUINFO_VENDOR "Motorola" | |
| #define CPUINFO_MACHINE "PQ2 ADS PowerPC" | |
| /* The ADS8260 has 16, 32-bit wide control/status registers, accessed | |
| * only on word boundaries. | |
| * Not all are used (yet), or are interesting to us (yet). | |
| */ | |
| /* Things of interest in the CSR. | |
| */ | |
| #define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */ | |
| #define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */ | |
| #define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable */ | |
| #define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */ | |
| #define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 == enable */ | |
| #define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 == enable */ | |
| #define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable */ | |
| #define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */ | |
| #define PHY_INTERRUPT SIU_INT_IRQ7 | |
| #ifdef CONFIG_PCI | |
| /* PCI interrupt controller */ | |
| #define PCI_INT_STAT_REG 0xF8200000 | |
| #define PCI_INT_MASK_REG 0xF8200004 | |
| #define PIRQA (NR_CPM_INTS + 0) | |
| #define PIRQB (NR_CPM_INTS + 1) | |
| #define PIRQC (NR_CPM_INTS + 2) | |
| #define PIRQD (NR_CPM_INTS + 3) | |
| /* | |
| * PCI memory map definitions for MPC8266ADS-PCI. | |
| * | |
| * processor view | |
| * local address PCI address target | |
| * 0x80000000-0x9FFFFFFF 0x80000000-0x9FFFFFFF PCI mem with prefetch | |
| * 0xA0000000-0xBFFFFFFF 0xA0000000-0xBFFFFFFF PCI mem w/o prefetch | |
| * 0xF4000000-0xF7FFFFFF 0x00000000-0x03FFFFFF PCI IO | |
| * | |
| * PCI master view | |
| * local address PCI address target | |
| * 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory | |
| */ | |
| /* All the other PCI memory map definitions reside at syslib/m82xx_pci.h | |
| Here we should redefine what is unique for this board */ | |
| #define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */ | |
| #define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */ | |
| #define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */ | |
| #define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */ | |
| #define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */ | |
| #if defined(CONFIG_ADS8272) | |
| #define PCI_INT_TO_SIU SIU_INT_IRQ2 | |
| #elif defined(CONFIG_PQ2FADS) | |
| #define PCI_INT_TO_SIU SIU_INT_IRQ6 | |
| #else | |
| #warning PCI Bridge will be without interrupts support | |
| #endif | |
| #endif /* CONFIG_PCI */ | |
| #endif /* __MACH_ADS8260_DEFS */ | |
| #endif /* __KERNEL__ */ |