| /* | |
| * MPC83xx Device descriptions | |
| * | |
| * Maintainer: Kumar Gala <galak@kernel.crashing.org> | |
| * | |
| * Copyright 2005 Freescale Semiconductor Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/device.h> | |
| #include <linux/serial_8250.h> | |
| #include <linux/fsl_devices.h> | |
| #include <asm/mpc83xx.h> | |
| #include <asm/irq.h> | |
| #include <asm/ppc_sys.h> | |
| #include <asm/machdep.h> | |
| /* We use offsets for IORESOURCE_MEM since we do not know at compile time | |
| * what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup | |
| */ | |
| struct gianfar_mdio_data mpc83xx_mdio_pdata = { | |
| }; | |
| static struct gianfar_platform_data mpc83xx_tsec1_pdata = { | |
| .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | | |
| FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | | |
| FSL_GIANFAR_DEV_HAS_MULTI_INTR, | |
| }; | |
| static struct gianfar_platform_data mpc83xx_tsec2_pdata = { | |
| .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | | |
| FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | | |
| FSL_GIANFAR_DEV_HAS_MULTI_INTR, | |
| }; | |
| static struct fsl_i2c_platform_data mpc83xx_fsl_i2c1_pdata = { | |
| .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, | |
| }; | |
| static struct fsl_i2c_platform_data mpc83xx_fsl_i2c2_pdata = { | |
| .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, | |
| }; | |
| static struct plat_serial8250_port serial_platform_data[] = { | |
| [0] = { | |
| .mapbase = 0x4500, | |
| .irq = MPC83xx_IRQ_UART1, | |
| .iotype = UPIO_MEM, | |
| .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, | |
| }, | |
| [1] = { | |
| .mapbase = 0x4600, | |
| .irq = MPC83xx_IRQ_UART2, | |
| .iotype = UPIO_MEM, | |
| .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, | |
| }, | |
| { }, | |
| }; | |
| struct platform_device ppc_sys_platform_devices[] = { | |
| [MPC83xx_TSEC1] = { | |
| .name = "fsl-gianfar", | |
| .id = 1, | |
| .dev.platform_data = &mpc83xx_tsec1_pdata, | |
| .num_resources = 4, | |
| .resource = (struct resource[]) { | |
| { | |
| .start = 0x24000, | |
| .end = 0x24fff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| { | |
| .name = "tx", | |
| .start = MPC83xx_IRQ_TSEC1_TX, | |
| .end = MPC83xx_IRQ_TSEC1_TX, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| { | |
| .name = "rx", | |
| .start = MPC83xx_IRQ_TSEC1_RX, | |
| .end = MPC83xx_IRQ_TSEC1_RX, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| { | |
| .name = "error", | |
| .start = MPC83xx_IRQ_TSEC1_ERROR, | |
| .end = MPC83xx_IRQ_TSEC1_ERROR, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| }, | |
| }, | |
| [MPC83xx_TSEC2] = { | |
| .name = "fsl-gianfar", | |
| .id = 2, | |
| .dev.platform_data = &mpc83xx_tsec2_pdata, | |
| .num_resources = 4, | |
| .resource = (struct resource[]) { | |
| { | |
| .start = 0x25000, | |
| .end = 0x25fff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| { | |
| .name = "tx", | |
| .start = MPC83xx_IRQ_TSEC2_TX, | |
| .end = MPC83xx_IRQ_TSEC2_TX, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| { | |
| .name = "rx", | |
| .start = MPC83xx_IRQ_TSEC2_RX, | |
| .end = MPC83xx_IRQ_TSEC2_RX, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| { | |
| .name = "error", | |
| .start = MPC83xx_IRQ_TSEC2_ERROR, | |
| .end = MPC83xx_IRQ_TSEC2_ERROR, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| }, | |
| }, | |
| [MPC83xx_IIC1] = { | |
| .name = "fsl-i2c", | |
| .id = 1, | |
| .dev.platform_data = &mpc83xx_fsl_i2c1_pdata, | |
| .num_resources = 2, | |
| .resource = (struct resource[]) { | |
| { | |
| .start = 0x3000, | |
| .end = 0x30ff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| { | |
| .start = MPC83xx_IRQ_IIC1, | |
| .end = MPC83xx_IRQ_IIC1, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| }, | |
| }, | |
| [MPC83xx_IIC2] = { | |
| .name = "fsl-i2c", | |
| .id = 2, | |
| .dev.platform_data = &mpc83xx_fsl_i2c2_pdata, | |
| .num_resources = 2, | |
| .resource = (struct resource[]) { | |
| { | |
| .start = 0x3100, | |
| .end = 0x31ff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| { | |
| .start = MPC83xx_IRQ_IIC2, | |
| .end = MPC83xx_IRQ_IIC2, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| }, | |
| }, | |
| [MPC83xx_DUART] = { | |
| .name = "serial8250", | |
| .id = PLAT8250_DEV_PLATFORM, | |
| .dev.platform_data = serial_platform_data, | |
| }, | |
| [MPC83xx_SEC2] = { | |
| .name = "fsl-sec2", | |
| .id = 1, | |
| .num_resources = 2, | |
| .resource = (struct resource[]) { | |
| { | |
| .start = 0x30000, | |
| .end = 0x3ffff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| { | |
| .start = MPC83xx_IRQ_SEC2, | |
| .end = MPC83xx_IRQ_SEC2, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| }, | |
| }, | |
| [MPC83xx_USB2_DR] = { | |
| .name = "fsl-ehci", | |
| .id = 1, | |
| .num_resources = 2, | |
| .resource = (struct resource[]) { | |
| { | |
| .start = 0x23000, | |
| .end = 0x23fff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| { | |
| .start = MPC83xx_IRQ_USB2_DR, | |
| .end = MPC83xx_IRQ_USB2_DR, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| }, | |
| }, | |
| [MPC83xx_USB2_MPH] = { | |
| .name = "fsl-ehci", | |
| .id = 2, | |
| .num_resources = 2, | |
| .resource = (struct resource[]) { | |
| { | |
| .start = 0x22000, | |
| .end = 0x22fff, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| { | |
| .start = MPC83xx_IRQ_USB2_MPH, | |
| .end = MPC83xx_IRQ_USB2_MPH, | |
| .flags = IORESOURCE_IRQ, | |
| }, | |
| }, | |
| }, | |
| [MPC83xx_MDIO] = { | |
| .name = "fsl-gianfar_mdio", | |
| .id = 0, | |
| .dev.platform_data = &mpc83xx_mdio_pdata, | |
| .num_resources = 1, | |
| .resource = (struct resource[]) { | |
| { | |
| .start = 0x24520, | |
| .end = 0x2453f, | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| }, | |
| }, | |
| }; | |
| static int __init mach_mpc83xx_fixup(struct platform_device *pdev) | |
| { | |
| ppc_sys_fixup_mem_resource(pdev, immrbar); | |
| return 0; | |
| } | |
| static int __init mach_mpc83xx_init(void) | |
| { | |
| if (ppc_md.progress) | |
| ppc_md.progress("mach_mpc83xx_init:enter", 0); | |
| ppc_sys_device_fixup = mach_mpc83xx_fixup; | |
| return 0; | |
| } | |
| postcore_initcall(mach_mpc83xx_init); |