| /* | |
| * arch/sh/mm/cache-sh4.c | |
| * | |
| * Copyright (C) 1999, 2000, 2002 Niibe Yutaka | |
| * Copyright (C) 2001 - 2006 Paul Mundt | |
| * Copyright (C) 2003 Richard Curnow | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/mm.h> | |
| #include <asm/addrspace.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/processor.h> | |
| #include <asm/cache.h> | |
| #include <asm/io.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/cacheflush.h> | |
| /* | |
| * The maximum number of pages we support up to when doing ranged dcache | |
| * flushing. Anything exceeding this will simply flush the dcache in its | |
| * entirety. | |
| */ | |
| #define MAX_DCACHE_PAGES 64 /* XXX: Tune for ways */ | |
| static void __flush_dcache_segment_1way(unsigned long start, | |
| unsigned long extent); | |
| static void __flush_dcache_segment_2way(unsigned long start, | |
| unsigned long extent); | |
| static void __flush_dcache_segment_4way(unsigned long start, | |
| unsigned long extent); | |
| static void __flush_cache_4096(unsigned long addr, unsigned long phys, | |
| unsigned long exec_offset); | |
| /* | |
| * This is initialised here to ensure that it is not placed in the BSS. If | |
| * that were to happen, note that cache_init gets called before the BSS is | |
| * cleared, so this would get nulled out which would be hopeless. | |
| */ | |
| static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) = | |
| (void (*)(unsigned long, unsigned long))0xdeadbeef; | |
| static void compute_alias(struct cache_info *c) | |
| { | |
| c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1); | |
| c->n_aliases = (c->alias_mask >> PAGE_SHIFT) + 1; | |
| } | |
| static void __init emit_cache_params(void) | |
| { | |
| printk("PVR=%08x CVR=%08x PRR=%08x\n", | |
| ctrl_inl(CCN_PVR), | |
| ctrl_inl(CCN_CVR), | |
| ctrl_inl(CCN_PRR)); | |
| printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n", | |
| cpu_data->icache.ways, | |
| cpu_data->icache.sets, | |
| cpu_data->icache.way_incr); | |
| printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", | |
| cpu_data->icache.entry_mask, | |
| cpu_data->icache.alias_mask, | |
| cpu_data->icache.n_aliases); | |
| printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n", | |
| cpu_data->dcache.ways, | |
| cpu_data->dcache.sets, | |
| cpu_data->dcache.way_incr); | |
| printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", | |
| cpu_data->dcache.entry_mask, | |
| cpu_data->dcache.alias_mask, | |
| cpu_data->dcache.n_aliases); | |
| if (!__flush_dcache_segment_fn) | |
| panic("unknown number of cache ways\n"); | |
| } | |
| /* | |
| * SH-4 has virtually indexed and physically tagged cache. | |
| */ | |
| /* Worst case assumed to be 64k cache, direct-mapped i.e. 4 synonym bits. */ | |
| #define MAX_P3_SEMAPHORES 16 | |
| struct semaphore p3map_sem[MAX_P3_SEMAPHORES]; | |
| void __init p3_cache_init(void) | |
| { | |
| int i; | |
| compute_alias(&cpu_data->icache); | |
| compute_alias(&cpu_data->dcache); | |
| switch (cpu_data->dcache.ways) { | |
| case 1: | |
| __flush_dcache_segment_fn = __flush_dcache_segment_1way; | |
| break; | |
| case 2: | |
| __flush_dcache_segment_fn = __flush_dcache_segment_2way; | |
| break; | |
| case 4: | |
| __flush_dcache_segment_fn = __flush_dcache_segment_4way; | |
| break; | |
| default: | |
| __flush_dcache_segment_fn = NULL; | |
| break; | |
| } | |
| emit_cache_params(); | |
| if (remap_area_pages(P3SEG, 0, PAGE_SIZE * 4, _PAGE_CACHABLE)) | |
| panic("%s failed.", __FUNCTION__); | |
| for (i = 0; i < cpu_data->dcache.n_aliases; i++) | |
| sema_init(&p3map_sem[i], 1); | |
| } | |
| /* | |
| * Write back the dirty D-caches, but not invalidate them. | |
| * | |
| * START: Virtual Address (U0, P1, or P3) | |
| * SIZE: Size of the region. | |
| */ | |
| void __flush_wback_region(void *start, int size) | |
| { | |
| unsigned long v; | |
| unsigned long begin, end; | |
| begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); | |
| end = ((unsigned long)start + size + L1_CACHE_BYTES-1) | |
| & ~(L1_CACHE_BYTES-1); | |
| for (v = begin; v < end; v+=L1_CACHE_BYTES) { | |
| asm volatile("ocbwb %0" | |
| : /* no output */ | |
| : "m" (__m(v))); | |
| } | |
| } | |
| /* | |
| * Write back the dirty D-caches and invalidate them. | |
| * | |
| * START: Virtual Address (U0, P1, or P3) | |
| * SIZE: Size of the region. | |
| */ | |
| void __flush_purge_region(void *start, int size) | |
| { | |
| unsigned long v; | |
| unsigned long begin, end; | |
| begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); | |
| end = ((unsigned long)start + size + L1_CACHE_BYTES-1) | |
| & ~(L1_CACHE_BYTES-1); | |
| for (v = begin; v < end; v+=L1_CACHE_BYTES) { | |
| asm volatile("ocbp %0" | |
| : /* no output */ | |
| : "m" (__m(v))); | |
| } | |
| } | |
| /* | |
| * No write back please | |
| */ | |
| void __flush_invalidate_region(void *start, int size) | |
| { | |
| unsigned long v; | |
| unsigned long begin, end; | |
| begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); | |
| end = ((unsigned long)start + size + L1_CACHE_BYTES-1) | |
| & ~(L1_CACHE_BYTES-1); | |
| for (v = begin; v < end; v+=L1_CACHE_BYTES) { | |
| asm volatile("ocbi %0" | |
| : /* no output */ | |
| : "m" (__m(v))); | |
| } | |
| } | |
| /* | |
| * Write back the range of D-cache, and purge the I-cache. | |
| * | |
| * Called from kernel/module.c:sys_init_module and routine for a.out format. | |
| */ | |
| void flush_icache_range(unsigned long start, unsigned long end) | |
| { | |
| flush_cache_all(); | |
| } | |
| /* | |
| * Write back the D-cache and purge the I-cache for signal trampoline. | |
| * .. which happens to be the same behavior as flush_icache_range(). | |
| * So, we simply flush out a line. | |
| */ | |
| void flush_cache_sigtramp(unsigned long addr) | |
| { | |
| unsigned long v, index; | |
| unsigned long flags; | |
| int i; | |
| v = addr & ~(L1_CACHE_BYTES-1); | |
| asm volatile("ocbwb %0" | |
| : /* no output */ | |
| : "m" (__m(v))); | |
| index = CACHE_IC_ADDRESS_ARRAY | (v & cpu_data->icache.entry_mask); | |
| local_irq_save(flags); | |
| jump_to_P2(); | |
| for (i = 0; i < cpu_data->icache.ways; | |
| i++, index += cpu_data->icache.way_incr) | |
| ctrl_outl(0, index); /* Clear out Valid-bit */ | |
| back_to_P1(); | |
| wmb(); | |
| local_irq_restore(flags); | |
| } | |
| static inline void flush_cache_4096(unsigned long start, | |
| unsigned long phys) | |
| { | |
| unsigned long flags, exec_offset = 0; | |
| /* | |
| * All types of SH-4 require PC to be in P2 to operate on the I-cache. | |
| * Some types of SH-4 require PC to be in P2 to operate on the D-cache. | |
| */ | |
| if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) || | |
| (start < CACHE_OC_ADDRESS_ARRAY)) | |
| exec_offset = 0x20000000; | |
| local_irq_save(flags); | |
| __flush_cache_4096(start | SH_CACHE_ASSOC, | |
| P1SEGADDR(phys), exec_offset); | |
| local_irq_restore(flags); | |
| } | |
| /* | |
| * Write back & invalidate the D-cache of the page. | |
| * (To avoid "alias" issues) | |
| */ | |
| void flush_dcache_page(struct page *page) | |
| { | |
| if (test_bit(PG_mapped, &page->flags)) { | |
| unsigned long phys = PHYSADDR(page_address(page)); | |
| unsigned long addr = CACHE_OC_ADDRESS_ARRAY; | |
| int i, n; | |
| /* Loop all the D-cache */ | |
| n = cpu_data->dcache.n_aliases; | |
| for (i = 0; i < n; i++, addr += PAGE_SIZE) | |
| flush_cache_4096(addr, phys); | |
| } | |
| wmb(); | |
| } | |
| /* TODO: Selective icache invalidation through IC address array.. */ | |
| static inline void flush_icache_all(void) | |
| { | |
| unsigned long flags, ccr; | |
| local_irq_save(flags); | |
| jump_to_P2(); | |
| /* Flush I-cache */ | |
| ccr = ctrl_inl(CCR); | |
| ccr |= CCR_CACHE_ICI; | |
| ctrl_outl(ccr, CCR); | |
| /* | |
| * back_to_P1() will take care of the barrier for us, don't add | |
| * another one! | |
| */ | |
| back_to_P1(); | |
| local_irq_restore(flags); | |
| } | |
| void flush_dcache_all(void) | |
| { | |
| (*__flush_dcache_segment_fn)(0UL, cpu_data->dcache.way_size); | |
| wmb(); | |
| } | |
| void flush_cache_all(void) | |
| { | |
| flush_dcache_all(); | |
| flush_icache_all(); | |
| } | |
| static void __flush_cache_mm(struct mm_struct *mm, unsigned long start, | |
| unsigned long end) | |
| { | |
| unsigned long d = 0, p = start & PAGE_MASK; | |
| unsigned long alias_mask = cpu_data->dcache.alias_mask; | |
| unsigned long n_aliases = cpu_data->dcache.n_aliases; | |
| unsigned long select_bit; | |
| unsigned long all_aliases_mask; | |
| unsigned long addr_offset; | |
| pgd_t *dir; | |
| pmd_t *pmd; | |
| pud_t *pud; | |
| pte_t *pte; | |
| int i; | |
| dir = pgd_offset(mm, p); | |
| pud = pud_offset(dir, p); | |
| pmd = pmd_offset(pud, p); | |
| end = PAGE_ALIGN(end); | |
| all_aliases_mask = (1 << n_aliases) - 1; | |
| do { | |
| if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) { | |
| p &= PMD_MASK; | |
| p += PMD_SIZE; | |
| pmd++; | |
| continue; | |
| } | |
| pte = pte_offset_kernel(pmd, p); | |
| do { | |
| unsigned long phys; | |
| pte_t entry = *pte; | |
| if (!(pte_val(entry) & _PAGE_PRESENT)) { | |
| pte++; | |
| p += PAGE_SIZE; | |
| continue; | |
| } | |
| phys = pte_val(entry) & PTE_PHYS_MASK; | |
| if ((p ^ phys) & alias_mask) { | |
| d |= 1 << ((p & alias_mask) >> PAGE_SHIFT); | |
| d |= 1 << ((phys & alias_mask) >> PAGE_SHIFT); | |
| if (d == all_aliases_mask) | |
| goto loop_exit; | |
| } | |
| pte++; | |
| p += PAGE_SIZE; | |
| } while (p < end && ((unsigned long)pte & ~PAGE_MASK)); | |
| pmd++; | |
| } while (p < end); | |
| loop_exit: | |
| addr_offset = 0; | |
| select_bit = 1; | |
| for (i = 0; i < n_aliases; i++) { | |
| if (d & select_bit) { | |
| (*__flush_dcache_segment_fn)(addr_offset, PAGE_SIZE); | |
| wmb(); | |
| } | |
| select_bit <<= 1; | |
| addr_offset += PAGE_SIZE; | |
| } | |
| } | |
| /* | |
| * Note : (RPC) since the caches are physically tagged, the only point | |
| * of flush_cache_mm for SH-4 is to get rid of aliases from the | |
| * D-cache. The assumption elsewhere, e.g. flush_cache_range, is that | |
| * lines can stay resident so long as the virtual address they were | |
| * accessed with (hence cache set) is in accord with the physical | |
| * address (i.e. tag). It's no different here. So I reckon we don't | |
| * need to flush the I-cache, since aliases don't matter for that. We | |
| * should try that. | |
| * | |
| * Caller takes mm->mmap_sem. | |
| */ | |
| void flush_cache_mm(struct mm_struct *mm) | |
| { | |
| /* | |
| * If cache is only 4k-per-way, there are never any 'aliases'. Since | |
| * the cache is physically tagged, the data can just be left in there. | |
| */ | |
| if (cpu_data->dcache.n_aliases == 0) | |
| return; | |
| /* | |
| * Don't bother groveling around the dcache for the VMA ranges | |
| * if there are too many PTEs to make it worthwhile. | |
| */ | |
| if (mm->nr_ptes >= MAX_DCACHE_PAGES) | |
| flush_dcache_all(); | |
| else { | |
| struct vm_area_struct *vma; | |
| /* | |
| * In this case there are reasonably sized ranges to flush, | |
| * iterate through the VMA list and take care of any aliases. | |
| */ | |
| for (vma = mm->mmap; vma; vma = vma->vm_next) | |
| __flush_cache_mm(mm, vma->vm_start, vma->vm_end); | |
| } | |
| /* Only touch the icache if one of the VMAs has VM_EXEC set. */ | |
| if (mm->exec_vm) | |
| flush_icache_all(); | |
| } | |
| /* | |
| * Write back and invalidate I/D-caches for the page. | |
| * | |
| * ADDR: Virtual Address (U0 address) | |
| * PFN: Physical page number | |
| */ | |
| void flush_cache_page(struct vm_area_struct *vma, unsigned long address, | |
| unsigned long pfn) | |
| { | |
| unsigned long phys = pfn << PAGE_SHIFT; | |
| unsigned int alias_mask; | |
| alias_mask = cpu_data->dcache.alias_mask; | |
| /* We only need to flush D-cache when we have alias */ | |
| if ((address^phys) & alias_mask) { | |
| /* Loop 4K of the D-cache */ | |
| flush_cache_4096( | |
| CACHE_OC_ADDRESS_ARRAY | (address & alias_mask), | |
| phys); | |
| /* Loop another 4K of the D-cache */ | |
| flush_cache_4096( | |
| CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask), | |
| phys); | |
| } | |
| alias_mask = cpu_data->icache.alias_mask; | |
| if (vma->vm_flags & VM_EXEC) { | |
| /* | |
| * Evict entries from the portion of the cache from which code | |
| * may have been executed at this address (virtual). There's | |
| * no need to evict from the portion corresponding to the | |
| * physical address as for the D-cache, because we know the | |
| * kernel has never executed the code through its identity | |
| * translation. | |
| */ | |
| flush_cache_4096( | |
| CACHE_IC_ADDRESS_ARRAY | (address & alias_mask), | |
| phys); | |
| } | |
| } | |
| /* | |
| * Write back and invalidate D-caches. | |
| * | |
| * START, END: Virtual Address (U0 address) | |
| * | |
| * NOTE: We need to flush the _physical_ page entry. | |
| * Flushing the cache lines for U0 only isn't enough. | |
| * We need to flush for P1 too, which may contain aliases. | |
| */ | |
| void flush_cache_range(struct vm_area_struct *vma, unsigned long start, | |
| unsigned long end) | |
| { | |
| /* | |
| * If cache is only 4k-per-way, there are never any 'aliases'. Since | |
| * the cache is physically tagged, the data can just be left in there. | |
| */ | |
| if (cpu_data->dcache.n_aliases == 0) | |
| return; | |
| /* | |
| * Don't bother with the lookup and alias check if we have a | |
| * wide range to cover, just blow away the dcache in its | |
| * entirety instead. -- PFM. | |
| */ | |
| if (((end - start) >> PAGE_SHIFT) >= MAX_DCACHE_PAGES) | |
| flush_dcache_all(); | |
| else | |
| __flush_cache_mm(vma->vm_mm, start, end); | |
| if (vma->vm_flags & VM_EXEC) { | |
| /* | |
| * TODO: Is this required??? Need to look at how I-cache | |
| * coherency is assured when new programs are loaded to see if | |
| * this matters. | |
| */ | |
| flush_icache_all(); | |
| } | |
| } | |
| /* | |
| * flush_icache_user_range | |
| * @vma: VMA of the process | |
| * @page: page | |
| * @addr: U0 address | |
| * @len: length of the range (< page size) | |
| */ | |
| void flush_icache_user_range(struct vm_area_struct *vma, | |
| struct page *page, unsigned long addr, int len) | |
| { | |
| flush_cache_page(vma, addr, page_to_pfn(page)); | |
| mb(); | |
| } | |
| /** | |
| * __flush_cache_4096 | |
| * | |
| * @addr: address in memory mapped cache array | |
| * @phys: P1 address to flush (has to match tags if addr has 'A' bit | |
| * set i.e. associative write) | |
| * @exec_offset: set to 0x20000000 if flush has to be executed from P2 | |
| * region else 0x0 | |
| * | |
| * The offset into the cache array implied by 'addr' selects the | |
| * 'colour' of the virtual address range that will be flushed. The | |
| * operation (purge/write-back) is selected by the lower 2 bits of | |
| * 'phys'. | |
| */ | |
| static void __flush_cache_4096(unsigned long addr, unsigned long phys, | |
| unsigned long exec_offset) | |
| { | |
| int way_count; | |
| unsigned long base_addr = addr; | |
| struct cache_info *dcache; | |
| unsigned long way_incr; | |
| unsigned long a, ea, p; | |
| unsigned long temp_pc; | |
| dcache = &cpu_data->dcache; | |
| /* Write this way for better assembly. */ | |
| way_count = dcache->ways; | |
| way_incr = dcache->way_incr; | |
| /* | |
| * Apply exec_offset (i.e. branch to P2 if required.). | |
| * | |
| * FIXME: | |
| * | |
| * If I write "=r" for the (temp_pc), it puts this in r6 hence | |
| * trashing exec_offset before it's been added on - why? Hence | |
| * "=&r" as a 'workaround' | |
| */ | |
| asm volatile("mov.l 1f, %0\n\t" | |
| "add %1, %0\n\t" | |
| "jmp @%0\n\t" | |
| "nop\n\t" | |
| ".balign 4\n\t" | |
| "1: .long 2f\n\t" | |
| "2:\n" : "=&r" (temp_pc) : "r" (exec_offset)); | |
| /* | |
| * We know there will be >=1 iteration, so write as do-while to avoid | |
| * pointless nead-of-loop check for 0 iterations. | |
| */ | |
| do { | |
| ea = base_addr + PAGE_SIZE; | |
| a = base_addr; | |
| p = phys; | |
| do { | |
| *(volatile unsigned long *)a = p; | |
| /* | |
| * Next line: intentionally not p+32, saves an add, p | |
| * will do since only the cache tag bits need to | |
| * match. | |
| */ | |
| *(volatile unsigned long *)(a+32) = p; | |
| a += 64; | |
| p += 64; | |
| } while (a < ea); | |
| base_addr += way_incr; | |
| } while (--way_count != 0); | |
| } | |
| /* | |
| * Break the 1, 2 and 4 way variants of this out into separate functions to | |
| * avoid nearly all the overhead of having the conditional stuff in the function | |
| * bodies (+ the 1 and 2 way cases avoid saving any registers too). | |
| */ | |
| static void __flush_dcache_segment_1way(unsigned long start, | |
| unsigned long extent_per_way) | |
| { | |
| unsigned long orig_sr, sr_with_bl; | |
| unsigned long base_addr; | |
| unsigned long way_incr, linesz, way_size; | |
| struct cache_info *dcache; | |
| register unsigned long a0, a0e; | |
| asm volatile("stc sr, %0" : "=r" (orig_sr)); | |
| sr_with_bl = orig_sr | (1<<28); | |
| base_addr = ((unsigned long)&empty_zero_page[0]); | |
| /* | |
| * The previous code aligned base_addr to 16k, i.e. the way_size of all | |
| * existing SH-4 D-caches. Whilst I don't see a need to have this | |
| * aligned to any better than the cache line size (which it will be | |
| * anyway by construction), let's align it to at least the way_size of | |
| * any existing or conceivable SH-4 D-cache. -- RPC | |
| */ | |
| base_addr = ((base_addr >> 16) << 16); | |
| base_addr |= start; | |
| dcache = &cpu_data->dcache; | |
| linesz = dcache->linesz; | |
| way_incr = dcache->way_incr; | |
| way_size = dcache->way_size; | |
| a0 = base_addr; | |
| a0e = base_addr + extent_per_way; | |
| do { | |
| asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "ocbi @%0" : : "r" (a0)); | |
| a0 += linesz; | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "ocbi @%0" : : "r" (a0)); | |
| a0 += linesz; | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "ocbi @%0" : : "r" (a0)); | |
| a0 += linesz; | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "ocbi @%0" : : "r" (a0)); | |
| asm volatile("ldc %0, sr" : : "r" (orig_sr)); | |
| a0 += linesz; | |
| } while (a0 < a0e); | |
| } | |
| static void __flush_dcache_segment_2way(unsigned long start, | |
| unsigned long extent_per_way) | |
| { | |
| unsigned long orig_sr, sr_with_bl; | |
| unsigned long base_addr; | |
| unsigned long way_incr, linesz, way_size; | |
| struct cache_info *dcache; | |
| register unsigned long a0, a1, a0e; | |
| asm volatile("stc sr, %0" : "=r" (orig_sr)); | |
| sr_with_bl = orig_sr | (1<<28); | |
| base_addr = ((unsigned long)&empty_zero_page[0]); | |
| /* See comment under 1-way above */ | |
| base_addr = ((base_addr >> 16) << 16); | |
| base_addr |= start; | |
| dcache = &cpu_data->dcache; | |
| linesz = dcache->linesz; | |
| way_incr = dcache->way_incr; | |
| way_size = dcache->way_size; | |
| a0 = base_addr; | |
| a1 = a0 + way_incr; | |
| a0e = base_addr + extent_per_way; | |
| do { | |
| asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "movca.l r0, @%1\n\t" | |
| "ocbi @%0\n\t" | |
| "ocbi @%1" : : | |
| "r" (a0), "r" (a1)); | |
| a0 += linesz; | |
| a1 += linesz; | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "movca.l r0, @%1\n\t" | |
| "ocbi @%0\n\t" | |
| "ocbi @%1" : : | |
| "r" (a0), "r" (a1)); | |
| a0 += linesz; | |
| a1 += linesz; | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "movca.l r0, @%1\n\t" | |
| "ocbi @%0\n\t" | |
| "ocbi @%1" : : | |
| "r" (a0), "r" (a1)); | |
| a0 += linesz; | |
| a1 += linesz; | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "movca.l r0, @%1\n\t" | |
| "ocbi @%0\n\t" | |
| "ocbi @%1" : : | |
| "r" (a0), "r" (a1)); | |
| asm volatile("ldc %0, sr" : : "r" (orig_sr)); | |
| a0 += linesz; | |
| a1 += linesz; | |
| } while (a0 < a0e); | |
| } | |
| static void __flush_dcache_segment_4way(unsigned long start, | |
| unsigned long extent_per_way) | |
| { | |
| unsigned long orig_sr, sr_with_bl; | |
| unsigned long base_addr; | |
| unsigned long way_incr, linesz, way_size; | |
| struct cache_info *dcache; | |
| register unsigned long a0, a1, a2, a3, a0e; | |
| asm volatile("stc sr, %0" : "=r" (orig_sr)); | |
| sr_with_bl = orig_sr | (1<<28); | |
| base_addr = ((unsigned long)&empty_zero_page[0]); | |
| /* See comment under 1-way above */ | |
| base_addr = ((base_addr >> 16) << 16); | |
| base_addr |= start; | |
| dcache = &cpu_data->dcache; | |
| linesz = dcache->linesz; | |
| way_incr = dcache->way_incr; | |
| way_size = dcache->way_size; | |
| a0 = base_addr; | |
| a1 = a0 + way_incr; | |
| a2 = a1 + way_incr; | |
| a3 = a2 + way_incr; | |
| a0e = base_addr + extent_per_way; | |
| do { | |
| asm volatile("ldc %0, sr" : : "r" (sr_with_bl)); | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "movca.l r0, @%1\n\t" | |
| "movca.l r0, @%2\n\t" | |
| "movca.l r0, @%3\n\t" | |
| "ocbi @%0\n\t" | |
| "ocbi @%1\n\t" | |
| "ocbi @%2\n\t" | |
| "ocbi @%3\n\t" : : | |
| "r" (a0), "r" (a1), "r" (a2), "r" (a3)); | |
| a0 += linesz; | |
| a1 += linesz; | |
| a2 += linesz; | |
| a3 += linesz; | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "movca.l r0, @%1\n\t" | |
| "movca.l r0, @%2\n\t" | |
| "movca.l r0, @%3\n\t" | |
| "ocbi @%0\n\t" | |
| "ocbi @%1\n\t" | |
| "ocbi @%2\n\t" | |
| "ocbi @%3\n\t" : : | |
| "r" (a0), "r" (a1), "r" (a2), "r" (a3)); | |
| a0 += linesz; | |
| a1 += linesz; | |
| a2 += linesz; | |
| a3 += linesz; | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "movca.l r0, @%1\n\t" | |
| "movca.l r0, @%2\n\t" | |
| "movca.l r0, @%3\n\t" | |
| "ocbi @%0\n\t" | |
| "ocbi @%1\n\t" | |
| "ocbi @%2\n\t" | |
| "ocbi @%3\n\t" : : | |
| "r" (a0), "r" (a1), "r" (a2), "r" (a3)); | |
| a0 += linesz; | |
| a1 += linesz; | |
| a2 += linesz; | |
| a3 += linesz; | |
| asm volatile("movca.l r0, @%0\n\t" | |
| "movca.l r0, @%1\n\t" | |
| "movca.l r0, @%2\n\t" | |
| "movca.l r0, @%3\n\t" | |
| "ocbi @%0\n\t" | |
| "ocbi @%1\n\t" | |
| "ocbi @%2\n\t" | |
| "ocbi @%3\n\t" : : | |
| "r" (a0), "r" (a1), "r" (a2), "r" (a3)); | |
| asm volatile("ldc %0, sr" : : "r" (orig_sr)); | |
| a0 += linesz; | |
| a1 += linesz; | |
| a2 += linesz; | |
| a3 += linesz; | |
| } while (a0 < a0e); | |
| } |