| /* | |
| * Page fault handler for SH with an MMU. | |
| * | |
| * Copyright (C) 1999 Niibe Yutaka | |
| * Copyright (C) 2003 Paul Mundt | |
| * | |
| * Based on linux/arch/i386/mm/fault.c: | |
| * Copyright (C) 1995 Linus Torvalds | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/hardirq.h> | |
| #include <linux/kprobes.h> | |
| #include <asm/system.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/kgdb.h> | |
| extern void die(const char *,struct pt_regs *,long); | |
| /* | |
| * This routine handles page faults. It determines the address, | |
| * and the problem, and then passes it off to one of the appropriate | |
| * routines. | |
| */ | |
| asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, | |
| unsigned long address) | |
| { | |
| struct task_struct *tsk; | |
| struct mm_struct *mm; | |
| struct vm_area_struct * vma; | |
| unsigned long page; | |
| #ifdef CONFIG_SH_KGDB | |
| if (kgdb_nofault && kgdb_bus_err_hook) | |
| kgdb_bus_err_hook(); | |
| #endif | |
| tsk = current; | |
| mm = tsk->mm; | |
| /* | |
| * If we're in an interrupt or have no user | |
| * context, we must not take the fault.. | |
| */ | |
| if (in_atomic() || !mm) | |
| goto no_context; | |
| down_read(&mm->mmap_sem); | |
| vma = find_vma(mm, address); | |
| if (!vma) | |
| goto bad_area; | |
| if (vma->vm_start <= address) | |
| goto good_area; | |
| if (!(vma->vm_flags & VM_GROWSDOWN)) | |
| goto bad_area; | |
| if (expand_stack(vma, address)) | |
| goto bad_area; | |
| /* | |
| * Ok, we have a good vm_area for this memory access, so | |
| * we can handle it.. | |
| */ | |
| good_area: | |
| if (writeaccess) { | |
| if (!(vma->vm_flags & VM_WRITE)) | |
| goto bad_area; | |
| } else { | |
| if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) | |
| goto bad_area; | |
| } | |
| /* | |
| * If for any reason at all we couldn't handle the fault, | |
| * make sure we exit gracefully rather than endlessly redo | |
| * the fault. | |
| */ | |
| survive: | |
| switch (handle_mm_fault(mm, vma, address, writeaccess)) { | |
| case VM_FAULT_MINOR: | |
| tsk->min_flt++; | |
| break; | |
| case VM_FAULT_MAJOR: | |
| tsk->maj_flt++; | |
| break; | |
| case VM_FAULT_SIGBUS: | |
| goto do_sigbus; | |
| case VM_FAULT_OOM: | |
| goto out_of_memory; | |
| default: | |
| BUG(); | |
| } | |
| up_read(&mm->mmap_sem); | |
| return; | |
| /* | |
| * Something tried to access memory that isn't in our memory map.. | |
| * Fix it, but check if it's kernel or user first.. | |
| */ | |
| bad_area: | |
| up_read(&mm->mmap_sem); | |
| if (user_mode(regs)) { | |
| tsk->thread.address = address; | |
| tsk->thread.error_code = writeaccess; | |
| force_sig(SIGSEGV, tsk); | |
| return; | |
| } | |
| no_context: | |
| /* Are we prepared to handle this kernel fault? */ | |
| if (fixup_exception(regs)) | |
| return; | |
| /* | |
| * Oops. The kernel tried to access some bad page. We'll have to | |
| * terminate things with extreme prejudice. | |
| * | |
| */ | |
| if (address < PAGE_SIZE) | |
| printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); | |
| else | |
| printk(KERN_ALERT "Unable to handle kernel paging request"); | |
| printk(" at virtual address %08lx\n", address); | |
| printk(KERN_ALERT "pc = %08lx\n", regs->pc); | |
| asm volatile("mov.l %1, %0" | |
| : "=r" (page) | |
| : "m" (__m(MMU_TTB))); | |
| if (page) { | |
| page = ((unsigned long *) page)[address >> 22]; | |
| printk(KERN_ALERT "*pde = %08lx\n", page); | |
| if (page & _PAGE_PRESENT) { | |
| page &= PAGE_MASK; | |
| address &= 0x003ff000; | |
| page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT]; | |
| printk(KERN_ALERT "*pte = %08lx\n", page); | |
| } | |
| } | |
| die("Oops", regs, writeaccess); | |
| do_exit(SIGKILL); | |
| /* | |
| * We ran out of memory, or some other thing happened to us that made | |
| * us unable to handle the page fault gracefully. | |
| */ | |
| out_of_memory: | |
| up_read(&mm->mmap_sem); | |
| if (is_init(current)) { | |
| yield(); | |
| down_read(&mm->mmap_sem); | |
| goto survive; | |
| } | |
| printk("VM: killing process %s\n", tsk->comm); | |
| if (user_mode(regs)) | |
| do_exit(SIGKILL); | |
| goto no_context; | |
| do_sigbus: | |
| up_read(&mm->mmap_sem); | |
| /* | |
| * Send a sigbus, regardless of whether we were in kernel | |
| * or user mode. | |
| */ | |
| tsk->thread.address = address; | |
| tsk->thread.error_code = writeaccess; | |
| tsk->thread.trap_no = 14; | |
| force_sig(SIGBUS, tsk); | |
| /* Kernel mode? Handle exceptions or die */ | |
| if (!user_mode(regs)) | |
| goto no_context; | |
| } | |
| #ifdef CONFIG_SH_STORE_QUEUES | |
| /* | |
| * This is a special case for the SH-4 store queues, as pages for this | |
| * space still need to be faulted in before it's possible to flush the | |
| * store queue cache for writeout to the remapped region. | |
| */ | |
| #define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000) | |
| #else | |
| #define P3_ADDR_MAX P4SEG | |
| #endif | |
| /* | |
| * Called with interrupts disabled. | |
| */ | |
| asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, | |
| unsigned long writeaccess, | |
| unsigned long address) | |
| { | |
| pgd_t *pgd; | |
| pud_t *pud; | |
| pmd_t *pmd; | |
| pte_t *pte; | |
| pte_t entry; | |
| struct mm_struct *mm = current->mm; | |
| spinlock_t *ptl; | |
| int ret = 1; | |
| #ifdef CONFIG_SH_KGDB | |
| if (kgdb_nofault && kgdb_bus_err_hook) | |
| kgdb_bus_err_hook(); | |
| #endif | |
| /* | |
| * We don't take page faults for P1, P2, and parts of P4, these | |
| * are always mapped, whether it be due to legacy behaviour in | |
| * 29-bit mode, or due to PMB configuration in 32-bit mode. | |
| */ | |
| if (address >= P3SEG && address < P3_ADDR_MAX) { | |
| pgd = pgd_offset_k(address); | |
| mm = NULL; | |
| } else { | |
| if (unlikely(address >= TASK_SIZE || !mm)) | |
| return 1; | |
| pgd = pgd_offset(mm, address); | |
| } | |
| pud = pud_offset(pgd, address); | |
| if (pud_none_or_clear_bad(pud)) | |
| return 1; | |
| pmd = pmd_offset(pud, address); | |
| if (pmd_none_or_clear_bad(pmd)) | |
| return 1; | |
| if (mm) | |
| pte = pte_offset_map_lock(mm, pmd, address, &ptl); | |
| else | |
| pte = pte_offset_kernel(pmd, address); | |
| entry = *pte; | |
| if (unlikely(pte_none(entry) || pte_not_present(entry))) | |
| goto unlock; | |
| if (unlikely(writeaccess && !pte_write(entry))) | |
| goto unlock; | |
| if (writeaccess) | |
| entry = pte_mkdirty(entry); | |
| entry = pte_mkyoung(entry); | |
| #ifdef CONFIG_CPU_SH4 | |
| /* | |
| * ITLB is not affected by "ldtlb" instruction. | |
| * So, we need to flush the entry by ourselves. | |
| */ | |
| __flush_tlb_page(get_asid(), address & PAGE_MASK); | |
| #endif | |
| set_pte(pte, entry); | |
| update_mmu_cache(NULL, address, entry); | |
| ret = 0; | |
| unlock: | |
| if (mm) | |
| pte_unmap_unlock(pte, ptl); | |
| return ret; | |
| } |