| /* $Id: init.c,v 1.19 2004/02/21 04:42:16 kkojima Exp $ | |
| * | |
| * linux/arch/sh/mm/init.c | |
| * | |
| * Copyright (C) 1999 Niibe Yutaka | |
| * Copyright (C) 2002, 2004 Paul Mundt | |
| * | |
| * Based on linux/arch/i386/mm/init.c: | |
| * Copyright (C) 1995 Linus Torvalds | |
| */ | |
| #include <linux/signal.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/mman.h> | |
| #include <linux/mm.h> | |
| #include <linux/swap.h> | |
| #include <linux/smp.h> | |
| #include <linux/init.h> | |
| #include <linux/highmem.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/proc_fs.h> | |
| #include <asm/processor.h> | |
| #include <asm/system.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/io.h> | |
| #include <asm/tlb.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/cache.h> | |
| DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); | |
| pgd_t swapper_pg_dir[PTRS_PER_PGD]; | |
| /* | |
| * Cache of MMU context last used. | |
| */ | |
| unsigned long mmu_context_cache = NO_CONTEXT; | |
| #ifdef CONFIG_MMU | |
| /* It'd be good if these lines were in the standard header file. */ | |
| #define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT) | |
| #define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn) | |
| #endif | |
| void (*copy_page)(void *from, void *to); | |
| void (*clear_page)(void *to); | |
| void show_mem(void) | |
| { | |
| int i, total = 0, reserved = 0; | |
| int shared = 0, cached = 0; | |
| printk("Mem-info:\n"); | |
| show_free_areas(); | |
| printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); | |
| i = max_mapnr; | |
| while (i-- > 0) { | |
| total++; | |
| if (PageReserved(mem_map+i)) | |
| reserved++; | |
| else if (PageSwapCache(mem_map+i)) | |
| cached++; | |
| else if (page_count(mem_map+i)) | |
| shared += page_count(mem_map+i) - 1; | |
| } | |
| printk("%d pages of RAM\n",total); | |
| printk("%d reserved pages\n",reserved); | |
| printk("%d pages shared\n",shared); | |
| printk("%d pages swap cached\n",cached); | |
| } | |
| static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) | |
| { | |
| pgd_t *pgd; | |
| pud_t *pud; | |
| pmd_t *pmd; | |
| pte_t *pte; | |
| pgd = swapper_pg_dir + pgd_index(addr); | |
| if (pgd_none(*pgd)) { | |
| pgd_ERROR(*pgd); | |
| return; | |
| } | |
| pud = pud_offset(pgd, addr); | |
| if (pud_none(*pud)) { | |
| pmd = (pmd_t *)get_zeroed_page(GFP_ATOMIC); | |
| set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE | _PAGE_USER)); | |
| if (pmd != pmd_offset(pud, 0)) { | |
| pud_ERROR(*pud); | |
| return; | |
| } | |
| } | |
| pmd = pmd_offset(pud, addr); | |
| if (pmd_none(*pmd)) { | |
| pte = (pte_t *)get_zeroed_page(GFP_ATOMIC); | |
| set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE | _PAGE_USER)); | |
| if (pte != pte_offset_kernel(pmd, 0)) { | |
| pmd_ERROR(*pmd); | |
| return; | |
| } | |
| } | |
| pte = pte_offset_kernel(pmd, addr); | |
| if (!pte_none(*pte)) { | |
| pte_ERROR(*pte); | |
| return; | |
| } | |
| set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot)); | |
| __flush_tlb_page(get_asid(), addr); | |
| } | |
| /* | |
| * As a performance optimization, other platforms preserve the fixmap mapping | |
| * across a context switch, we don't presently do this, but this could be done | |
| * in a similar fashion as to the wired TLB interface that sh64 uses (by way | |
| * of the memorry mapped UTLB configuration) -- this unfortunately forces us to | |
| * give up a TLB entry for each mapping we want to preserve. While this may be | |
| * viable for a small number of fixmaps, it's not particularly useful for | |
| * everything and needs to be carefully evaluated. (ie, we may want this for | |
| * the vsyscall page). | |
| * | |
| * XXX: Perhaps add a _PAGE_WIRED flag or something similar that we can pass | |
| * in at __set_fixmap() time to determine the appropriate behavior to follow. | |
| * | |
| * -- PFM. | |
| */ | |
| void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) | |
| { | |
| unsigned long address = __fix_to_virt(idx); | |
| if (idx >= __end_of_fixed_addresses) { | |
| BUG(); | |
| return; | |
| } | |
| set_pte_phys(address, phys, prot); | |
| } | |
| /* References to section boundaries */ | |
| extern char _text, _etext, _edata, __bss_start, _end; | |
| extern char __init_begin, __init_end; | |
| /* | |
| * paging_init() sets up the page tables | |
| * | |
| * This routines also unmaps the page at virtual kernel address 0, so | |
| * that we can trap those pesky NULL-reference errors in the kernel. | |
| */ | |
| void __init paging_init(void) | |
| { | |
| unsigned long zones_size[MAX_NR_ZONES] = { 0, }; | |
| /* | |
| * Setup some defaults for the zone sizes.. these should be safe | |
| * regardless of distcontiguous memory or MMU settings. | |
| */ | |
| zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT; | |
| zones_size[ZONE_NORMAL] = __MEMORY_SIZE >> PAGE_SHIFT; | |
| #ifdef CONFIG_HIGHMEM | |
| zones_size[ZONE_HIGHMEM] = 0 >> PAGE_SHIFT; | |
| #endif | |
| #ifdef CONFIG_MMU | |
| /* | |
| * If we have an MMU, and want to be using it .. we need to adjust | |
| * the zone sizes accordingly, in addition to turning it on. | |
| */ | |
| { | |
| unsigned long max_dma, low, start_pfn; | |
| pgd_t *pg_dir; | |
| int i; | |
| /* We don't need kernel mapping as hardware support that. */ | |
| pg_dir = swapper_pg_dir; | |
| for (i = 0; i < PTRS_PER_PGD; i++) | |
| pgd_val(pg_dir[i]) = 0; | |
| /* Turn on the MMU */ | |
| enable_mmu(); | |
| /* Fixup the zone sizes */ | |
| start_pfn = START_PFN; | |
| max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; | |
| low = MAX_LOW_PFN; | |
| if (low < max_dma) { | |
| zones_size[ZONE_DMA] = low - start_pfn; | |
| zones_size[ZONE_NORMAL] = 0; | |
| } else { | |
| zones_size[ZONE_DMA] = max_dma - start_pfn; | |
| zones_size[ZONE_NORMAL] = low - max_dma; | |
| } | |
| } | |
| #elif defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4) | |
| /* | |
| * If we don't have CONFIG_MMU set and the processor in question | |
| * still has an MMU, care needs to be taken to make sure it doesn't | |
| * stay on.. Since the boot loader could have potentially already | |
| * turned it on, and we clearly don't want it, we simply turn it off. | |
| * | |
| * We don't need to do anything special for the zone sizes, since the | |
| * default values that were already configured up above should be | |
| * satisfactory. | |
| */ | |
| disable_mmu(); | |
| #endif | |
| NODE_DATA(0)->node_mem_map = NULL; | |
| free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0); | |
| } | |
| static struct kcore_list kcore_mem, kcore_vmalloc; | |
| void __init mem_init(void) | |
| { | |
| extern unsigned long empty_zero_page[1024]; | |
| int codesize, reservedpages, datasize, initsize; | |
| int tmp; | |
| extern unsigned long memory_start; | |
| #ifdef CONFIG_MMU | |
| high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE); | |
| #else | |
| extern unsigned long memory_end; | |
| high_memory = (void *)(memory_end & PAGE_MASK); | |
| #endif | |
| max_mapnr = num_physpages = MAP_NR(high_memory) - MAP_NR(memory_start); | |
| /* clear the zero-page */ | |
| memset(empty_zero_page, 0, PAGE_SIZE); | |
| __flush_wback_region(empty_zero_page, PAGE_SIZE); | |
| /* | |
| * Setup wrappers for copy/clear_page(), these will get overridden | |
| * later in the boot process if a better method is available. | |
| */ | |
| #ifdef CONFIG_MMU | |
| copy_page = copy_page_slow; | |
| clear_page = clear_page_slow; | |
| #else | |
| copy_page = copy_page_nommu; | |
| clear_page = clear_page_nommu; | |
| #endif | |
| /* this will put all low memory onto the freelists */ | |
| totalram_pages += free_all_bootmem_node(NODE_DATA(0)); | |
| reservedpages = 0; | |
| for (tmp = 0; tmp < num_physpages; tmp++) | |
| /* | |
| * Only count reserved RAM pages | |
| */ | |
| if (PageReserved(mem_map+tmp)) | |
| reservedpages++; | |
| codesize = (unsigned long) &_etext - (unsigned long) &_text; | |
| datasize = (unsigned long) &_edata - (unsigned long) &_etext; | |
| initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; | |
| kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT); | |
| kclist_add(&kcore_vmalloc, (void *)VMALLOC_START, | |
| VMALLOC_END - VMALLOC_START); | |
| printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, " | |
| "%dk reserved, %dk data, %dk init)\n", | |
| (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), | |
| max_mapnr << (PAGE_SHIFT-10), | |
| codesize >> 10, | |
| reservedpages << (PAGE_SHIFT-10), | |
| datasize >> 10, | |
| initsize >> 10); | |
| p3_cache_init(); | |
| /* Initialize the vDSO */ | |
| vsyscall_init(); | |
| } | |
| void free_initmem(void) | |
| { | |
| unsigned long addr; | |
| addr = (unsigned long)(&__init_begin); | |
| for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { | |
| ClearPageReserved(virt_to_page(addr)); | |
| init_page_count(virt_to_page(addr)); | |
| free_page(addr); | |
| totalram_pages++; | |
| } | |
| printk ("Freeing unused kernel memory: %dk freed\n", (&__init_end - &__init_begin) >> 10); | |
| } | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| void free_initrd_mem(unsigned long start, unsigned long end) | |
| { | |
| unsigned long p; | |
| for (p = start; p < end; p += PAGE_SIZE) { | |
| ClearPageReserved(virt_to_page(p)); | |
| init_page_count(virt_to_page(p)); | |
| free_page(p); | |
| totalram_pages++; | |
| } | |
| printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); | |
| } | |
| #endif | |