| /* | |
| * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) | |
| * | |
| * May be copied or modified under the terms of the GNU General Public | |
| * License. See linux/COPYING for more information. | |
| * | |
| * This file contains the I/O routines for use on the overdrive board | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/delay.h> | |
| #include <asm/system.h> | |
| #include <asm/processor.h> | |
| #include <asm/io.h> | |
| /* | |
| * readX/writeX() are used to access memory mapped devices. On some | |
| * architectures the memory mapped IO stuff needs to be accessed | |
| * differently. On the SuperH architecture, we just read/write the | |
| * memory location directly. | |
| */ | |
| /* This is horrible at the moment - needs more work to do something sensible */ | |
| #define IO_DELAY() | |
| #define OUT_DELAY(x,type) \ | |
| void out##x##_p(unsigned type value,unsigned long port){out##x(value,port);IO_DELAY();} | |
| #define IN_DELAY(x,type) \ | |
| unsigned type in##x##_p(unsigned long port) {unsigned type tmp=in##x(port);IO_DELAY();return tmp;} | |
| #if 1 | |
| OUT_DELAY(b, long) OUT_DELAY(w, long) OUT_DELAY(l, long) | |
| IN_DELAY(b, long) IN_DELAY(w, long) IN_DELAY(l, long) | |
| #endif | |
| /* Now for the string version of these functions */ | |
| void outsb(unsigned long port, const void *addr, unsigned long count) | |
| { | |
| int i; | |
| unsigned char *p = (unsigned char *) addr; | |
| for (i = 0; i < count; i++, p++) { | |
| outb(*p, port); | |
| } | |
| } | |
| void insb(unsigned long port, void *addr, unsigned long count) | |
| { | |
| int i; | |
| unsigned char *p = (unsigned char *) addr; | |
| for (i = 0; i < count; i++, p++) { | |
| *p = inb(port); | |
| } | |
| } | |
| /* For the 16 and 32 bit string functions, we have to worry about alignment. | |
| * The SH does not do unaligned accesses, so we have to read as bytes and | |
| * then write as a word or dword. | |
| * This can be optimised a lot more, especially in the case where the data | |
| * is aligned | |
| */ | |
| void outsw(unsigned long port, const void *addr, unsigned long count) | |
| { | |
| int i; | |
| unsigned short tmp; | |
| unsigned char *p = (unsigned char *) addr; | |
| for (i = 0; i < count; i++, p += 2) { | |
| tmp = (*p) | ((*(p + 1)) << 8); | |
| outw(tmp, port); | |
| } | |
| } | |
| void insw(unsigned long port, void *addr, unsigned long count) | |
| { | |
| int i; | |
| unsigned short tmp; | |
| unsigned char *p = (unsigned char *) addr; | |
| for (i = 0; i < count; i++, p += 2) { | |
| tmp = inw(port); | |
| p[0] = tmp & 0xff; | |
| p[1] = (tmp >> 8) & 0xff; | |
| } | |
| } | |
| void outsl(unsigned long port, const void *addr, unsigned long count) | |
| { | |
| int i; | |
| unsigned tmp; | |
| unsigned char *p = (unsigned char *) addr; | |
| for (i = 0; i < count; i++, p += 4) { | |
| tmp = (*p) | ((*(p + 1)) << 8) | ((*(p + 2)) << 16) | | |
| ((*(p + 3)) << 24); | |
| outl(tmp, port); | |
| } | |
| } | |
| void insl(unsigned long port, void *addr, unsigned long count) | |
| { | |
| int i; | |
| unsigned tmp; | |
| unsigned char *p = (unsigned char *) addr; | |
| for (i = 0; i < count; i++, p += 4) { | |
| tmp = inl(port); | |
| p[0] = tmp & 0xff; | |
| p[1] = (tmp >> 8) & 0xff; | |
| p[2] = (tmp >> 16) & 0xff; | |
| p[3] = (tmp >> 24) & 0xff; | |
| } | |
| } | |
| void memcpy_toio(void __iomem *to, const void *from, long count) | |
| { | |
| unsigned char *p = (unsigned char *) from; | |
| while (count) { | |
| count--; | |
| writeb(*p++, to++); | |
| } | |
| } | |
| void memcpy_fromio(void *to, void __iomem *from, long count) | |
| { | |
| int i; | |
| unsigned char *p = (unsigned char *) to; | |
| for (i = 0; i < count; i++) { | |
| p[i] = readb(from); | |
| from++; | |
| } | |
| } |