| /* | |
| * Dynamic DMA mapping support. | |
| */ | |
| #include <linux/types.h> | |
| #include <linux/mm.h> | |
| #include <linux/string.h> | |
| #include <linux/pci.h> | |
| #include <linux/module.h> | |
| #include <asm/io.h> | |
| #include <asm/proto.h> | |
| #include <asm/calgary.h> | |
| int iommu_merge __read_mostly = 0; | |
| EXPORT_SYMBOL(iommu_merge); | |
| dma_addr_t bad_dma_address __read_mostly; | |
| EXPORT_SYMBOL(bad_dma_address); | |
| /* This tells the BIO block layer to assume merging. Default to off | |
| because we cannot guarantee merging later. */ | |
| int iommu_bio_merge __read_mostly = 0; | |
| EXPORT_SYMBOL(iommu_bio_merge); | |
| int iommu_sac_force __read_mostly = 0; | |
| EXPORT_SYMBOL(iommu_sac_force); | |
| int no_iommu __read_mostly; | |
| #ifdef CONFIG_IOMMU_DEBUG | |
| int panic_on_overflow __read_mostly = 1; | |
| int force_iommu __read_mostly = 1; | |
| #else | |
| int panic_on_overflow __read_mostly = 0; | |
| int force_iommu __read_mostly= 0; | |
| #endif | |
| /* Set this to 1 if there is a HW IOMMU in the system */ | |
| int iommu_detected __read_mostly = 0; | |
| /* Dummy device used for NULL arguments (normally ISA). Better would | |
| be probably a smaller DMA mask, but this is bug-to-bug compatible | |
| to i386. */ | |
| struct device fallback_dev = { | |
| .bus_id = "fallback device", | |
| .coherent_dma_mask = DMA_32BIT_MASK, | |
| .dma_mask = &fallback_dev.coherent_dma_mask, | |
| }; | |
| /* Allocate DMA memory on node near device */ | |
| noinline static void * | |
| dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) | |
| { | |
| struct page *page; | |
| int node; | |
| #ifdef CONFIG_PCI | |
| if (dev->bus == &pci_bus_type) | |
| node = pcibus_to_node(to_pci_dev(dev)->bus); | |
| else | |
| #endif | |
| node = numa_node_id(); | |
| if (node < first_node(node_online_map)) | |
| node = first_node(node_online_map); | |
| page = alloc_pages_node(node, gfp, order); | |
| return page ? page_address(page) : NULL; | |
| } | |
| /* | |
| * Allocate memory for a coherent mapping. | |
| */ | |
| void * | |
| dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, | |
| gfp_t gfp) | |
| { | |
| void *memory; | |
| unsigned long dma_mask = 0; | |
| u64 bus; | |
| if (!dev) | |
| dev = &fallback_dev; | |
| dma_mask = dev->coherent_dma_mask; | |
| if (dma_mask == 0) | |
| dma_mask = DMA_32BIT_MASK; | |
| /* Don't invoke OOM killer */ | |
| gfp |= __GFP_NORETRY; | |
| /* Kludge to make it bug-to-bug compatible with i386. i386 | |
| uses the normal dma_mask for alloc_coherent. */ | |
| dma_mask &= *dev->dma_mask; | |
| /* Why <=? Even when the mask is smaller than 4GB it is often | |
| larger than 16MB and in this case we have a chance of | |
| finding fitting memory in the next higher zone first. If | |
| not retry with true GFP_DMA. -AK */ | |
| if (dma_mask <= DMA_32BIT_MASK) | |
| gfp |= GFP_DMA32; | |
| again: | |
| memory = dma_alloc_pages(dev, gfp, get_order(size)); | |
| if (memory == NULL) | |
| return NULL; | |
| { | |
| int high, mmu; | |
| bus = virt_to_bus(memory); | |
| high = (bus + size) >= dma_mask; | |
| mmu = high; | |
| if (force_iommu && !(gfp & GFP_DMA)) | |
| mmu = 1; | |
| else if (high) { | |
| free_pages((unsigned long)memory, | |
| get_order(size)); | |
| /* Don't use the 16MB ZONE_DMA unless absolutely | |
| needed. It's better to use remapping first. */ | |
| if (dma_mask < DMA_32BIT_MASK && !(gfp & GFP_DMA)) { | |
| gfp = (gfp & ~GFP_DMA32) | GFP_DMA; | |
| goto again; | |
| } | |
| /* Let low level make its own zone decisions */ | |
| gfp &= ~(GFP_DMA32|GFP_DMA); | |
| if (dma_ops->alloc_coherent) | |
| return dma_ops->alloc_coherent(dev, size, | |
| dma_handle, gfp); | |
| return NULL; | |
| } | |
| memset(memory, 0, size); | |
| if (!mmu) { | |
| *dma_handle = virt_to_bus(memory); | |
| return memory; | |
| } | |
| } | |
| if (dma_ops->alloc_coherent) { | |
| free_pages((unsigned long)memory, get_order(size)); | |
| gfp &= ~(GFP_DMA|GFP_DMA32); | |
| return dma_ops->alloc_coherent(dev, size, dma_handle, gfp); | |
| } | |
| if (dma_ops->map_simple) { | |
| *dma_handle = dma_ops->map_simple(dev, memory, | |
| size, | |
| PCI_DMA_BIDIRECTIONAL); | |
| if (*dma_handle != bad_dma_address) | |
| return memory; | |
| } | |
| if (panic_on_overflow) | |
| panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n",size); | |
| free_pages((unsigned long)memory, get_order(size)); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(dma_alloc_coherent); | |
| /* | |
| * Unmap coherent memory. | |
| * The caller must ensure that the device has finished accessing the mapping. | |
| */ | |
| void dma_free_coherent(struct device *dev, size_t size, | |
| void *vaddr, dma_addr_t bus) | |
| { | |
| if (dma_ops->unmap_single) | |
| dma_ops->unmap_single(dev, bus, size, 0); | |
| free_pages((unsigned long)vaddr, get_order(size)); | |
| } | |
| EXPORT_SYMBOL(dma_free_coherent); | |
| static int forbid_dac __read_mostly; | |
| int dma_supported(struct device *dev, u64 mask) | |
| { | |
| #ifdef CONFIG_PCI | |
| if (mask > 0xffffffff && forbid_dac > 0) { | |
| printk(KERN_INFO "PCI: Disallowing DAC for device %s\n", dev->bus_id); | |
| return 0; | |
| } | |
| #endif | |
| if (dma_ops->dma_supported) | |
| return dma_ops->dma_supported(dev, mask); | |
| /* Copied from i386. Doesn't make much sense, because it will | |
| only work for pci_alloc_coherent. | |
| The caller just has to use GFP_DMA in this case. */ | |
| if (mask < DMA_24BIT_MASK) | |
| return 0; | |
| /* Tell the device to use SAC when IOMMU force is on. This | |
| allows the driver to use cheaper accesses in some cases. | |
| Problem with this is that if we overflow the IOMMU area and | |
| return DAC as fallback address the device may not handle it | |
| correctly. | |
| As a special case some controllers have a 39bit address | |
| mode that is as efficient as 32bit (aic79xx). Don't force | |
| SAC for these. Assume all masks <= 40 bits are of this | |
| type. Normally this doesn't make any difference, but gives | |
| more gentle handling of IOMMU overflow. */ | |
| if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) { | |
| printk(KERN_INFO "%s: Force SAC with mask %Lx\n", dev->bus_id,mask); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| EXPORT_SYMBOL(dma_supported); | |
| int dma_set_mask(struct device *dev, u64 mask) | |
| { | |
| if (!dev->dma_mask || !dma_supported(dev, mask)) | |
| return -EIO; | |
| *dev->dma_mask = mask; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(dma_set_mask); | |
| /* iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge] | |
| [,forcesac][,fullflush][,nomerge][,biomerge] | |
| size set size of iommu (in bytes) | |
| noagp don't initialize the AGP driver and use full aperture. | |
| off don't use the IOMMU | |
| leak turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on) | |
| memaper[=order] allocate an own aperture over RAM with size 32MB^order. | |
| noforce don't force IOMMU usage. Default. | |
| force Force IOMMU. | |
| merge Do lazy merging. This may improve performance on some block devices. | |
| Implies force (experimental) | |
| biomerge Do merging at the BIO layer. This is more efficient than merge, | |
| but should be only done with very big IOMMUs. Implies merge,force. | |
| nomerge Don't do SG merging. | |
| forcesac For SAC mode for masks <40bits (experimental) | |
| fullflush Flush IOMMU on each allocation (default) | |
| nofullflush Don't use IOMMU fullflush | |
| allowed overwrite iommu off workarounds for specific chipsets. | |
| soft Use software bounce buffering (default for Intel machines) | |
| noaperture Don't touch the aperture for AGP. | |
| allowdac Allow DMA >4GB | |
| nodac Forbid DMA >4GB | |
| panic Force panic when IOMMU overflows | |
| */ | |
| __init int iommu_setup(char *p) | |
| { | |
| iommu_merge = 1; | |
| if (!p) | |
| return -EINVAL; | |
| while (*p) { | |
| if (!strncmp(p,"off",3)) | |
| no_iommu = 1; | |
| /* gart_parse_options has more force support */ | |
| if (!strncmp(p,"force",5)) | |
| force_iommu = 1; | |
| if (!strncmp(p,"noforce",7)) { | |
| iommu_merge = 0; | |
| force_iommu = 0; | |
| } | |
| if (!strncmp(p, "biomerge",8)) { | |
| iommu_bio_merge = 4096; | |
| iommu_merge = 1; | |
| force_iommu = 1; | |
| } | |
| if (!strncmp(p, "panic",5)) | |
| panic_on_overflow = 1; | |
| if (!strncmp(p, "nopanic",7)) | |
| panic_on_overflow = 0; | |
| if (!strncmp(p, "merge",5)) { | |
| iommu_merge = 1; | |
| force_iommu = 1; | |
| } | |
| if (!strncmp(p, "nomerge",7)) | |
| iommu_merge = 0; | |
| if (!strncmp(p, "forcesac",8)) | |
| iommu_sac_force = 1; | |
| if (!strncmp(p, "allowdac", 8)) | |
| forbid_dac = 0; | |
| if (!strncmp(p, "nodac", 5)) | |
| forbid_dac = -1; | |
| #ifdef CONFIG_SWIOTLB | |
| if (!strncmp(p, "soft",4)) | |
| swiotlb = 1; | |
| #endif | |
| #ifdef CONFIG_IOMMU | |
| gart_parse_options(p); | |
| #endif | |
| p += strcspn(p, ","); | |
| if (*p == ',') | |
| ++p; | |
| } | |
| return 0; | |
| } | |
| early_param("iommu", iommu_setup); | |
| void __init pci_iommu_alloc(void) | |
| { | |
| /* | |
| * The order of these functions is important for | |
| * fall-back/fail-over reasons | |
| */ | |
| #ifdef CONFIG_IOMMU | |
| iommu_hole_init(); | |
| #endif | |
| #ifdef CONFIG_CALGARY_IOMMU | |
| detect_calgary(); | |
| #endif | |
| #ifdef CONFIG_SWIOTLB | |
| pci_swiotlb_init(); | |
| #endif | |
| } | |
| static int __init pci_iommu_init(void) | |
| { | |
| #ifdef CONFIG_CALGARY_IOMMU | |
| calgary_iommu_init(); | |
| #endif | |
| #ifdef CONFIG_IOMMU | |
| gart_iommu_init(); | |
| #endif | |
| no_iommu_init(); | |
| return 0; | |
| } | |
| /* Must execute after PCI subsystem */ | |
| fs_initcall(pci_iommu_init); |