| /* | |
| * linux/arch/x86-64/mm/fault.c | |
| * | |
| * Copyright (C) 1995 Linus Torvalds | |
| * Copyright (C) 2001,2002 Andi Kleen, SuSE Labs. | |
| */ | |
| #include <linux/signal.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/mman.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/smp_lock.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/init.h> | |
| #include <linux/tty.h> | |
| #include <linux/vt_kern.h> /* For unblank_screen() */ | |
| #include <linux/compiler.h> | |
| #include <linux/module.h> | |
| #include <linux/kprobes.h> | |
| #include <asm/system.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/smp.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/proto.h> | |
| #include <asm/kdebug.h> | |
| #include <asm-generic/sections.h> | |
| /* Page fault error code bits */ | |
| #define PF_PROT (1<<0) /* or no page found */ | |
| #define PF_WRITE (1<<1) | |
| #define PF_USER (1<<2) | |
| #define PF_RSVD (1<<3) | |
| #define PF_INSTR (1<<4) | |
| static ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); | |
| /* Hook to register for page fault notifications */ | |
| int register_page_fault_notifier(struct notifier_block *nb) | |
| { | |
| vmalloc_sync_all(); | |
| return atomic_notifier_chain_register(¬ify_page_fault_chain, nb); | |
| } | |
| EXPORT_SYMBOL_GPL(register_page_fault_notifier); | |
| int unregister_page_fault_notifier(struct notifier_block *nb) | |
| { | |
| return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb); | |
| } | |
| EXPORT_SYMBOL_GPL(unregister_page_fault_notifier); | |
| static inline int notify_page_fault(enum die_val val, const char *str, | |
| struct pt_regs *regs, long err, int trap, int sig) | |
| { | |
| struct die_args args = { | |
| .regs = regs, | |
| .str = str, | |
| .err = err, | |
| .trapnr = trap, | |
| .signr = sig | |
| }; | |
| return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); | |
| } | |
| void bust_spinlocks(int yes) | |
| { | |
| int loglevel_save = console_loglevel; | |
| if (yes) { | |
| oops_in_progress = 1; | |
| } else { | |
| #ifdef CONFIG_VT | |
| unblank_screen(); | |
| #endif | |
| oops_in_progress = 0; | |
| /* | |
| * OK, the message is on the console. Now we call printk() | |
| * without oops_in_progress set so that printk will give klogd | |
| * a poke. Hold onto your hats... | |
| */ | |
| console_loglevel = 15; /* NMI oopser may have shut the console up */ | |
| printk(" "); | |
| console_loglevel = loglevel_save; | |
| } | |
| } | |
| /* Sometimes the CPU reports invalid exceptions on prefetch. | |
| Check that here and ignore. | |
| Opcode checker based on code by Richard Brunner */ | |
| static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr, | |
| unsigned long error_code) | |
| { | |
| unsigned char __user *instr; | |
| int scan_more = 1; | |
| int prefetch = 0; | |
| unsigned char *max_instr; | |
| /* If it was a exec fault ignore */ | |
| if (error_code & PF_INSTR) | |
| return 0; | |
| instr = (unsigned char __user *)convert_rip_to_linear(current, regs); | |
| max_instr = instr + 15; | |
| if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE) | |
| return 0; | |
| while (scan_more && instr < max_instr) { | |
| unsigned char opcode; | |
| unsigned char instr_hi; | |
| unsigned char instr_lo; | |
| if (__get_user(opcode, (char __user *)instr)) | |
| break; | |
| instr_hi = opcode & 0xf0; | |
| instr_lo = opcode & 0x0f; | |
| instr++; | |
| switch (instr_hi) { | |
| case 0x20: | |
| case 0x30: | |
| /* Values 0x26,0x2E,0x36,0x3E are valid x86 | |
| prefixes. In long mode, the CPU will signal | |
| invalid opcode if some of these prefixes are | |
| present so we will never get here anyway */ | |
| scan_more = ((instr_lo & 7) == 0x6); | |
| break; | |
| case 0x40: | |
| /* In AMD64 long mode, 0x40 to 0x4F are valid REX prefixes | |
| Need to figure out under what instruction mode the | |
| instruction was issued ... */ | |
| /* Could check the LDT for lm, but for now it's good | |
| enough to assume that long mode only uses well known | |
| segments or kernel. */ | |
| scan_more = (!user_mode(regs)) || (regs->cs == __USER_CS); | |
| break; | |
| case 0x60: | |
| /* 0x64 thru 0x67 are valid prefixes in all modes. */ | |
| scan_more = (instr_lo & 0xC) == 0x4; | |
| break; | |
| case 0xF0: | |
| /* 0xF0, 0xF2, and 0xF3 are valid prefixes in all modes. */ | |
| scan_more = !instr_lo || (instr_lo>>1) == 1; | |
| break; | |
| case 0x00: | |
| /* Prefetch instruction is 0x0F0D or 0x0F18 */ | |
| scan_more = 0; | |
| if (__get_user(opcode, (char __user *)instr)) | |
| break; | |
| prefetch = (instr_lo == 0xF) && | |
| (opcode == 0x0D || opcode == 0x18); | |
| break; | |
| default: | |
| scan_more = 0; | |
| break; | |
| } | |
| } | |
| return prefetch; | |
| } | |
| static int bad_address(void *p) | |
| { | |
| unsigned long dummy; | |
| return __get_user(dummy, (unsigned long __user *)p); | |
| } | |
| void dump_pagetable(unsigned long address) | |
| { | |
| pgd_t *pgd; | |
| pud_t *pud; | |
| pmd_t *pmd; | |
| pte_t *pte; | |
| asm("movq %%cr3,%0" : "=r" (pgd)); | |
| pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK); | |
| pgd += pgd_index(address); | |
| if (bad_address(pgd)) goto bad; | |
| printk("PGD %lx ", pgd_val(*pgd)); | |
| if (!pgd_present(*pgd)) goto ret; | |
| pud = pud_offset(pgd, address); | |
| if (bad_address(pud)) goto bad; | |
| printk("PUD %lx ", pud_val(*pud)); | |
| if (!pud_present(*pud)) goto ret; | |
| pmd = pmd_offset(pud, address); | |
| if (bad_address(pmd)) goto bad; | |
| printk("PMD %lx ", pmd_val(*pmd)); | |
| if (!pmd_present(*pmd)) goto ret; | |
| pte = pte_offset_kernel(pmd, address); | |
| if (bad_address(pte)) goto bad; | |
| printk("PTE %lx", pte_val(*pte)); | |
| ret: | |
| printk("\n"); | |
| return; | |
| bad: | |
| printk("BAD\n"); | |
| } | |
| static const char errata93_warning[] = | |
| KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n" | |
| KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n" | |
| KERN_ERR "******* Please consider a BIOS update.\n" | |
| KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n"; | |
| /* Workaround for K8 erratum #93 & buggy BIOS. | |
| BIOS SMM functions are required to use a specific workaround | |
| to avoid corruption of the 64bit RIP register on C stepping K8. | |
| A lot of BIOS that didn't get tested properly miss this. | |
| The OS sees this as a page fault with the upper 32bits of RIP cleared. | |
| Try to work around it here. | |
| Note we only handle faults in kernel here. */ | |
| static int is_errata93(struct pt_regs *regs, unsigned long address) | |
| { | |
| static int warned; | |
| if (address != regs->rip) | |
| return 0; | |
| if ((address >> 32) != 0) | |
| return 0; | |
| address |= 0xffffffffUL << 32; | |
| if ((address >= (u64)_stext && address <= (u64)_etext) || | |
| (address >= MODULES_VADDR && address <= MODULES_END)) { | |
| if (!warned) { | |
| printk(errata93_warning); | |
| warned = 1; | |
| } | |
| regs->rip = address; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| int unhandled_signal(struct task_struct *tsk, int sig) | |
| { | |
| if (is_init(tsk)) | |
| return 1; | |
| if (tsk->ptrace & PT_PTRACED) | |
| return 0; | |
| return (tsk->sighand->action[sig-1].sa.sa_handler == SIG_IGN) || | |
| (tsk->sighand->action[sig-1].sa.sa_handler == SIG_DFL); | |
| } | |
| static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs, | |
| unsigned long error_code) | |
| { | |
| unsigned long flags = oops_begin(); | |
| struct task_struct *tsk; | |
| printk(KERN_ALERT "%s: Corrupted page table at address %lx\n", | |
| current->comm, address); | |
| dump_pagetable(address); | |
| tsk = current; | |
| tsk->thread.cr2 = address; | |
| tsk->thread.trap_no = 14; | |
| tsk->thread.error_code = error_code; | |
| __die("Bad pagetable", regs, error_code); | |
| oops_end(flags); | |
| do_exit(SIGKILL); | |
| } | |
| /* | |
| * Handle a fault on the vmalloc area | |
| * | |
| * This assumes no large pages in there. | |
| */ | |
| static int vmalloc_fault(unsigned long address) | |
| { | |
| pgd_t *pgd, *pgd_ref; | |
| pud_t *pud, *pud_ref; | |
| pmd_t *pmd, *pmd_ref; | |
| pte_t *pte, *pte_ref; | |
| /* Copy kernel mappings over when needed. This can also | |
| happen within a race in page table update. In the later | |
| case just flush. */ | |
| pgd = pgd_offset(current->mm ?: &init_mm, address); | |
| pgd_ref = pgd_offset_k(address); | |
| if (pgd_none(*pgd_ref)) | |
| return -1; | |
| if (pgd_none(*pgd)) | |
| set_pgd(pgd, *pgd_ref); | |
| else | |
| BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref)); | |
| /* Below here mismatches are bugs because these lower tables | |
| are shared */ | |
| pud = pud_offset(pgd, address); | |
| pud_ref = pud_offset(pgd_ref, address); | |
| if (pud_none(*pud_ref)) | |
| return -1; | |
| if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref)) | |
| BUG(); | |
| pmd = pmd_offset(pud, address); | |
| pmd_ref = pmd_offset(pud_ref, address); | |
| if (pmd_none(*pmd_ref)) | |
| return -1; | |
| if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref)) | |
| BUG(); | |
| pte_ref = pte_offset_kernel(pmd_ref, address); | |
| if (!pte_present(*pte_ref)) | |
| return -1; | |
| pte = pte_offset_kernel(pmd, address); | |
| /* Don't use pte_page here, because the mappings can point | |
| outside mem_map, and the NUMA hash lookup cannot handle | |
| that. */ | |
| if (!pte_present(*pte) || pte_pfn(*pte) != pte_pfn(*pte_ref)) | |
| BUG(); | |
| return 0; | |
| } | |
| int page_fault_trace = 0; | |
| int exception_trace = 1; | |
| /* | |
| * This routine handles page faults. It determines the address, | |
| * and the problem, and then passes it off to one of the appropriate | |
| * routines. | |
| */ | |
| asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, | |
| unsigned long error_code) | |
| { | |
| struct task_struct *tsk; | |
| struct mm_struct *mm; | |
| struct vm_area_struct * vma; | |
| unsigned long address; | |
| const struct exception_table_entry *fixup; | |
| int write; | |
| unsigned long flags; | |
| siginfo_t info; | |
| tsk = current; | |
| mm = tsk->mm; | |
| prefetchw(&mm->mmap_sem); | |
| /* get the address */ | |
| __asm__("movq %%cr2,%0":"=r" (address)); | |
| info.si_code = SEGV_MAPERR; | |
| /* | |
| * We fault-in kernel-space virtual memory on-demand. The | |
| * 'reference' page table is init_mm.pgd. | |
| * | |
| * NOTE! We MUST NOT take any locks for this case. We may | |
| * be in an interrupt or a critical region, and should | |
| * only copy the information from the master page table, | |
| * nothing more. | |
| * | |
| * This verifies that the fault happens in kernel space | |
| * (error_code & 4) == 0, and that the fault was not a | |
| * protection error (error_code & 9) == 0. | |
| */ | |
| if (unlikely(address >= TASK_SIZE64)) { | |
| /* | |
| * Don't check for the module range here: its PML4 | |
| * is always initialized because it's shared with the main | |
| * kernel text. Only vmalloc may need PML4 syncups. | |
| */ | |
| if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) && | |
| ((address >= VMALLOC_START && address < VMALLOC_END))) { | |
| if (vmalloc_fault(address) >= 0) | |
| return; | |
| } | |
| if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, | |
| SIGSEGV) == NOTIFY_STOP) | |
| return; | |
| /* | |
| * Don't take the mm semaphore here. If we fixup a prefetch | |
| * fault we could otherwise deadlock. | |
| */ | |
| goto bad_area_nosemaphore; | |
| } | |
| if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, | |
| SIGSEGV) == NOTIFY_STOP) | |
| return; | |
| if (likely(regs->eflags & X86_EFLAGS_IF)) | |
| local_irq_enable(); | |
| if (unlikely(page_fault_trace)) | |
| printk("pagefault rip:%lx rsp:%lx cs:%lu ss:%lu address %lx error %lx\n", | |
| regs->rip,regs->rsp,regs->cs,regs->ss,address,error_code); | |
| if (unlikely(error_code & PF_RSVD)) | |
| pgtable_bad(address, regs, error_code); | |
| /* | |
| * If we're in an interrupt or have no user | |
| * context, we must not take the fault.. | |
| */ | |
| if (unlikely(in_atomic() || !mm)) | |
| goto bad_area_nosemaphore; | |
| again: | |
| /* When running in the kernel we expect faults to occur only to | |
| * addresses in user space. All other faults represent errors in the | |
| * kernel and should generate an OOPS. Unfortunatly, in the case of an | |
| * erroneous fault occurring in a code path which already holds mmap_sem | |
| * we will deadlock attempting to validate the fault against the | |
| * address space. Luckily the kernel only validly references user | |
| * space from well defined areas of code, which are listed in the | |
| * exceptions table. | |
| * | |
| * As the vast majority of faults will be valid we will only perform | |
| * the source reference check when there is a possibilty of a deadlock. | |
| * Attempt to lock the address space, if we cannot we then validate the | |
| * source. If this is invalid we can skip the address space check, | |
| * thus avoiding the deadlock. | |
| */ | |
| if (!down_read_trylock(&mm->mmap_sem)) { | |
| if ((error_code & PF_USER) == 0 && | |
| !search_exception_tables(regs->rip)) | |
| goto bad_area_nosemaphore; | |
| down_read(&mm->mmap_sem); | |
| } | |
| vma = find_vma(mm, address); | |
| if (!vma) | |
| goto bad_area; | |
| if (likely(vma->vm_start <= address)) | |
| goto good_area; | |
| if (!(vma->vm_flags & VM_GROWSDOWN)) | |
| goto bad_area; | |
| if (error_code & 4) { | |
| /* Allow userspace just enough access below the stack pointer | |
| * to let the 'enter' instruction work. | |
| */ | |
| if (address + 65536 + 32 * sizeof(unsigned long) < regs->rsp) | |
| goto bad_area; | |
| } | |
| if (expand_stack(vma, address)) | |
| goto bad_area; | |
| /* | |
| * Ok, we have a good vm_area for this memory access, so | |
| * we can handle it.. | |
| */ | |
| good_area: | |
| info.si_code = SEGV_ACCERR; | |
| write = 0; | |
| switch (error_code & (PF_PROT|PF_WRITE)) { | |
| default: /* 3: write, present */ | |
| /* fall through */ | |
| case PF_WRITE: /* write, not present */ | |
| if (!(vma->vm_flags & VM_WRITE)) | |
| goto bad_area; | |
| write++; | |
| break; | |
| case PF_PROT: /* read, present */ | |
| goto bad_area; | |
| case 0: /* read, not present */ | |
| if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) | |
| goto bad_area; | |
| } | |
| /* | |
| * If for any reason at all we couldn't handle the fault, | |
| * make sure we exit gracefully rather than endlessly redo | |
| * the fault. | |
| */ | |
| switch (handle_mm_fault(mm, vma, address, write)) { | |
| case VM_FAULT_MINOR: | |
| tsk->min_flt++; | |
| break; | |
| case VM_FAULT_MAJOR: | |
| tsk->maj_flt++; | |
| break; | |
| case VM_FAULT_SIGBUS: | |
| goto do_sigbus; | |
| default: | |
| goto out_of_memory; | |
| } | |
| up_read(&mm->mmap_sem); | |
| return; | |
| /* | |
| * Something tried to access memory that isn't in our memory map.. | |
| * Fix it, but check if it's kernel or user first.. | |
| */ | |
| bad_area: | |
| up_read(&mm->mmap_sem); | |
| bad_area_nosemaphore: | |
| /* User mode accesses just cause a SIGSEGV */ | |
| if (error_code & PF_USER) { | |
| if (is_prefetch(regs, address, error_code)) | |
| return; | |
| /* Work around K8 erratum #100 K8 in compat mode | |
| occasionally jumps to illegal addresses >4GB. We | |
| catch this here in the page fault handler because | |
| these addresses are not reachable. Just detect this | |
| case and return. Any code segment in LDT is | |
| compatibility mode. */ | |
| if ((regs->cs == __USER32_CS || (regs->cs & (1<<2))) && | |
| (address >> 32)) | |
| return; | |
| if (exception_trace && unhandled_signal(tsk, SIGSEGV)) { | |
| printk( | |
| "%s%s[%d]: segfault at %016lx rip %016lx rsp %016lx error %lx\n", | |
| tsk->pid > 1 ? KERN_INFO : KERN_EMERG, | |
| tsk->comm, tsk->pid, address, regs->rip, | |
| regs->rsp, error_code); | |
| } | |
| tsk->thread.cr2 = address; | |
| /* Kernel addresses are always protection faults */ | |
| tsk->thread.error_code = error_code | (address >= TASK_SIZE); | |
| tsk->thread.trap_no = 14; | |
| info.si_signo = SIGSEGV; | |
| info.si_errno = 0; | |
| /* info.si_code has been set above */ | |
| info.si_addr = (void __user *)address; | |
| force_sig_info(SIGSEGV, &info, tsk); | |
| return; | |
| } | |
| no_context: | |
| /* Are we prepared to handle this kernel fault? */ | |
| fixup = search_exception_tables(regs->rip); | |
| if (fixup) { | |
| regs->rip = fixup->fixup; | |
| return; | |
| } | |
| /* | |
| * Hall of shame of CPU/BIOS bugs. | |
| */ | |
| if (is_prefetch(regs, address, error_code)) | |
| return; | |
| if (is_errata93(regs, address)) | |
| return; | |
| /* | |
| * Oops. The kernel tried to access some bad page. We'll have to | |
| * terminate things with extreme prejudice. | |
| */ | |
| flags = oops_begin(); | |
| if (address < PAGE_SIZE) | |
| printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); | |
| else | |
| printk(KERN_ALERT "Unable to handle kernel paging request"); | |
| printk(" at %016lx RIP: \n" KERN_ALERT,address); | |
| printk_address(regs->rip); | |
| dump_pagetable(address); | |
| tsk->thread.cr2 = address; | |
| tsk->thread.trap_no = 14; | |
| tsk->thread.error_code = error_code; | |
| __die("Oops", regs, error_code); | |
| /* Executive summary in case the body of the oops scrolled away */ | |
| printk(KERN_EMERG "CR2: %016lx\n", address); | |
| oops_end(flags); | |
| do_exit(SIGKILL); | |
| /* | |
| * We ran out of memory, or some other thing happened to us that made | |
| * us unable to handle the page fault gracefully. | |
| */ | |
| out_of_memory: | |
| up_read(&mm->mmap_sem); | |
| if (is_init(current)) { | |
| yield(); | |
| goto again; | |
| } | |
| printk("VM: killing process %s\n", tsk->comm); | |
| if (error_code & 4) | |
| do_exit(SIGKILL); | |
| goto no_context; | |
| do_sigbus: | |
| up_read(&mm->mmap_sem); | |
| /* Kernel mode? Handle exceptions or die */ | |
| if (!(error_code & PF_USER)) | |
| goto no_context; | |
| tsk->thread.cr2 = address; | |
| tsk->thread.error_code = error_code; | |
| tsk->thread.trap_no = 14; | |
| info.si_signo = SIGBUS; | |
| info.si_errno = 0; | |
| info.si_code = BUS_ADRERR; | |
| info.si_addr = (void __user *)address; | |
| force_sig_info(SIGBUS, &info, tsk); | |
| return; | |
| } | |
| DEFINE_SPINLOCK(pgd_lock); | |
| struct page *pgd_list; | |
| void vmalloc_sync_all(void) | |
| { | |
| /* Note that races in the updates of insync and start aren't | |
| problematic: | |
| insync can only get set bits added, and updates to start are only | |
| improving performance (without affecting correctness if undone). */ | |
| static DECLARE_BITMAP(insync, PTRS_PER_PGD); | |
| static unsigned long start = VMALLOC_START & PGDIR_MASK; | |
| unsigned long address; | |
| for (address = start; address <= VMALLOC_END; address += PGDIR_SIZE) { | |
| if (!test_bit(pgd_index(address), insync)) { | |
| const pgd_t *pgd_ref = pgd_offset_k(address); | |
| struct page *page; | |
| if (pgd_none(*pgd_ref)) | |
| continue; | |
| spin_lock(&pgd_lock); | |
| for (page = pgd_list; page; | |
| page = (struct page *)page->index) { | |
| pgd_t *pgd; | |
| pgd = (pgd_t *)page_address(page) + pgd_index(address); | |
| if (pgd_none(*pgd)) | |
| set_pgd(pgd, *pgd_ref); | |
| else | |
| BUG_ON(pgd_page_vaddr(*pgd) != pgd_page_vaddr(*pgd_ref)); | |
| } | |
| spin_unlock(&pgd_lock); | |
| set_bit(pgd_index(address), insync); | |
| } | |
| if (address == start) | |
| start = address + PGDIR_SIZE; | |
| } | |
| /* Check that there is no need to do the same for the modules area. */ | |
| BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL)); | |
| BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) == | |
| (__START_KERNEL & PGDIR_MASK))); | |
| } | |
| static int __init enable_pagefaulttrace(char *str) | |
| { | |
| page_fault_trace = 1; | |
| return 1; | |
| } | |
| __setup("pagefaulttrace", enable_pagefaulttrace); |