| /****************************************************************************** | |
| * | |
| * Module Name: evregion - ACPI address_space (op_region) handler dispatch | |
| * | |
| *****************************************************************************/ | |
| /* | |
| * Copyright (C) 2000 - 2006, R. Byron Moore | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer | |
| * substantially similar to the "NO WARRANTY" disclaimer below | |
| * ("Disclaimer") and any redistribution must be conditioned upon | |
| * including a substantially similar Disclaimer requirement for further | |
| * binary redistribution. | |
| * 3. Neither the names of the above-listed copyright holders nor the names | |
| * of any contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2 as published by the Free | |
| * Software Foundation. | |
| * | |
| * NO WARRANTY | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGES. | |
| */ | |
| #include <acpi/acpi.h> | |
| #include <acpi/acevents.h> | |
| #include <acpi/acnamesp.h> | |
| #include <acpi/acinterp.h> | |
| #define _COMPONENT ACPI_EVENTS | |
| ACPI_MODULE_NAME("evregion") | |
| #define ACPI_NUM_DEFAULT_SPACES 4 | |
| static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = { | |
| ACPI_ADR_SPACE_SYSTEM_MEMORY, | |
| ACPI_ADR_SPACE_SYSTEM_IO, | |
| ACPI_ADR_SPACE_PCI_CONFIG, | |
| ACPI_ADR_SPACE_DATA_TABLE | |
| }; | |
| /* Local prototypes */ | |
| static acpi_status | |
| acpi_ev_reg_run(acpi_handle obj_handle, | |
| u32 level, void *context, void **return_value); | |
| static acpi_status | |
| acpi_ev_install_handler(acpi_handle obj_handle, | |
| u32 level, void *context, void **return_value); | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_install_region_handlers | |
| * | |
| * PARAMETERS: None | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Installs the core subsystem default address space handlers. | |
| * | |
| ******************************************************************************/ | |
| acpi_status acpi_ev_install_region_handlers(void) | |
| { | |
| acpi_status status; | |
| acpi_native_uint i; | |
| ACPI_FUNCTION_TRACE(ev_install_region_handlers); | |
| status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); | |
| if (ACPI_FAILURE(status)) { | |
| return_ACPI_STATUS(status); | |
| } | |
| /* | |
| * All address spaces (PCI Config, EC, SMBus) are scope dependent | |
| * and registration must occur for a specific device. | |
| * | |
| * In the case of the system memory and IO address spaces there is currently | |
| * no device associated with the address space. For these we use the root. | |
| * | |
| * We install the default PCI config space handler at the root so | |
| * that this space is immediately available even though the we have | |
| * not enumerated all the PCI Root Buses yet. This is to conform | |
| * to the ACPI specification which states that the PCI config | |
| * space must be always available -- even though we are nowhere | |
| * near ready to find the PCI root buses at this point. | |
| * | |
| * NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler | |
| * has already been installed (via acpi_install_address_space_handler). | |
| * Similar for AE_SAME_HANDLER. | |
| */ | |
| for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) { | |
| status = acpi_ev_install_space_handler(acpi_gbl_root_node, | |
| acpi_gbl_default_address_spaces | |
| [i], | |
| ACPI_DEFAULT_HANDLER, | |
| NULL, NULL); | |
| switch (status) { | |
| case AE_OK: | |
| case AE_SAME_HANDLER: | |
| case AE_ALREADY_EXISTS: | |
| /* These exceptions are all OK */ | |
| status = AE_OK; | |
| break; | |
| default: | |
| goto unlock_and_exit; | |
| } | |
| } | |
| unlock_and_exit: | |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); | |
| return_ACPI_STATUS(status); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_initialize_op_regions | |
| * | |
| * PARAMETERS: None | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Execute _REG methods for all Operation Regions that have | |
| * an installed default region handler. | |
| * | |
| ******************************************************************************/ | |
| acpi_status acpi_ev_initialize_op_regions(void) | |
| { | |
| acpi_status status; | |
| acpi_native_uint i; | |
| ACPI_FUNCTION_TRACE(ev_initialize_op_regions); | |
| status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); | |
| if (ACPI_FAILURE(status)) { | |
| return_ACPI_STATUS(status); | |
| } | |
| /* | |
| * Run the _REG methods for op_regions in each default address space | |
| */ | |
| for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) { | |
| /* TBD: Make sure handler is the DEFAULT handler, otherwise | |
| * _REG will have already been run. | |
| */ | |
| status = acpi_ev_execute_reg_methods(acpi_gbl_root_node, | |
| acpi_gbl_default_address_spaces | |
| [i]); | |
| } | |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); | |
| return_ACPI_STATUS(status); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_execute_reg_method | |
| * | |
| * PARAMETERS: region_obj - Region object | |
| * Function - Passed to _REG: On (1) or Off (0) | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Execute _REG method for a region | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) | |
| { | |
| struct acpi_evaluate_info *info; | |
| union acpi_operand_object *args[3]; | |
| union acpi_operand_object *region_obj2; | |
| acpi_status status; | |
| ACPI_FUNCTION_TRACE(ev_execute_reg_method); | |
| region_obj2 = acpi_ns_get_secondary_object(region_obj); | |
| if (!region_obj2) { | |
| return_ACPI_STATUS(AE_NOT_EXIST); | |
| } | |
| if (region_obj2->extra.method_REG == NULL) { | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| /* Allocate and initialize the evaluation information block */ | |
| info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info)); | |
| if (!info) { | |
| return_ACPI_STATUS(AE_NO_MEMORY); | |
| } | |
| info->prefix_node = region_obj2->extra.method_REG; | |
| info->pathname = NULL; | |
| info->parameters = args; | |
| info->parameter_type = ACPI_PARAM_ARGS; | |
| info->flags = ACPI_IGNORE_RETURN_VALUE; | |
| /* | |
| * The _REG method has two arguments: | |
| * | |
| * Arg0 - Integer: | |
| * Operation region space ID Same value as region_obj->Region.space_id | |
| * | |
| * Arg1 - Integer: | |
| * connection status 1 for connecting the handler, 0 for disconnecting | |
| * the handler (Passed as a parameter) | |
| */ | |
| args[0] = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER); | |
| if (!args[0]) { | |
| status = AE_NO_MEMORY; | |
| goto cleanup1; | |
| } | |
| args[1] = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER); | |
| if (!args[1]) { | |
| status = AE_NO_MEMORY; | |
| goto cleanup2; | |
| } | |
| /* Setup the parameter objects */ | |
| args[0]->integer.value = region_obj->region.space_id; | |
| args[1]->integer.value = function; | |
| args[2] = NULL; | |
| /* Execute the method, no return value */ | |
| ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname | |
| (ACPI_TYPE_METHOD, info->prefix_node, NULL)); | |
| status = acpi_ns_evaluate(info); | |
| acpi_ut_remove_reference(args[1]); | |
| cleanup2: | |
| acpi_ut_remove_reference(args[0]); | |
| cleanup1: | |
| ACPI_FREE(info); | |
| return_ACPI_STATUS(status); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_address_space_dispatch | |
| * | |
| * PARAMETERS: region_obj - Internal region object | |
| * Function - Read or Write operation | |
| * Address - Where in the space to read or write | |
| * bit_width - Field width in bits (8, 16, 32, or 64) | |
| * Value - Pointer to in or out value, must be | |
| * full 64-bit acpi_integer | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Dispatch an address space or operation region access to | |
| * a previously installed handler. | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, | |
| u32 function, | |
| acpi_physical_address address, | |
| u32 bit_width, acpi_integer * value) | |
| { | |
| acpi_status status; | |
| acpi_status status2; | |
| acpi_adr_space_handler handler; | |
| acpi_adr_space_setup region_setup; | |
| union acpi_operand_object *handler_desc; | |
| union acpi_operand_object *region_obj2; | |
| void *region_context = NULL; | |
| ACPI_FUNCTION_TRACE(ev_address_space_dispatch); | |
| region_obj2 = acpi_ns_get_secondary_object(region_obj); | |
| if (!region_obj2) { | |
| return_ACPI_STATUS(AE_NOT_EXIST); | |
| } | |
| /* Ensure that there is a handler associated with this region */ | |
| handler_desc = region_obj->region.handler; | |
| if (!handler_desc) { | |
| ACPI_ERROR((AE_INFO, | |
| "No handler for Region [%4.4s] (%p) [%s]", | |
| acpi_ut_get_node_name(region_obj->region.node), | |
| region_obj, | |
| acpi_ut_get_region_name(region_obj->region. | |
| space_id))); | |
| return_ACPI_STATUS(AE_NOT_EXIST); | |
| } | |
| /* | |
| * It may be the case that the region has never been initialized | |
| * Some types of regions require special init code | |
| */ | |
| if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) { | |
| /* | |
| * This region has not been initialized yet, do it | |
| */ | |
| region_setup = handler_desc->address_space.setup; | |
| if (!region_setup) { | |
| /* No initialization routine, exit with error */ | |
| ACPI_ERROR((AE_INFO, | |
| "No init routine for region(%p) [%s]", | |
| region_obj, | |
| acpi_ut_get_region_name(region_obj->region. | |
| space_id))); | |
| return_ACPI_STATUS(AE_NOT_EXIST); | |
| } | |
| /* | |
| * We must exit the interpreter because the region | |
| * setup will potentially execute control methods | |
| * (e.g., _REG method for this region) | |
| */ | |
| acpi_ex_exit_interpreter(); | |
| status = region_setup(region_obj, ACPI_REGION_ACTIVATE, | |
| handler_desc->address_space.context, | |
| ®ion_context); | |
| /* Re-enter the interpreter */ | |
| status2 = acpi_ex_enter_interpreter(); | |
| if (ACPI_FAILURE(status2)) { | |
| return_ACPI_STATUS(status2); | |
| } | |
| /* Check for failure of the Region Setup */ | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_EXCEPTION((AE_INFO, status, | |
| "During region initialization: [%s]", | |
| acpi_ut_get_region_name(region_obj-> | |
| region. | |
| space_id))); | |
| return_ACPI_STATUS(status); | |
| } | |
| /* | |
| * Region initialization may have been completed by region_setup | |
| */ | |
| if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) { | |
| region_obj->region.flags |= AOPOBJ_SETUP_COMPLETE; | |
| if (region_obj2->extra.region_context) { | |
| /* The handler for this region was already installed */ | |
| ACPI_FREE(region_context); | |
| } else { | |
| /* | |
| * Save the returned context for use in all accesses to | |
| * this particular region | |
| */ | |
| region_obj2->extra.region_context = | |
| region_context; | |
| } | |
| } | |
| } | |
| /* We have everything we need, we can invoke the address space handler */ | |
| handler = handler_desc->address_space.handler; | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "Handler %p (@%p) Address %8.8X%8.8X [%s]\n", | |
| ®ion_obj->region.handler->address_space, handler, | |
| ACPI_FORMAT_UINT64(address), | |
| acpi_ut_get_region_name(region_obj->region. | |
| space_id))); | |
| if (!(handler_desc->address_space.handler_flags & | |
| ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) { | |
| /* | |
| * For handlers other than the default (supplied) handlers, we must | |
| * exit the interpreter because the handler *might* block -- we don't | |
| * know what it will do, so we can't hold the lock on the intepreter. | |
| */ | |
| acpi_ex_exit_interpreter(); | |
| } | |
| /* Call the handler */ | |
| status = handler(function, address, bit_width, value, | |
| handler_desc->address_space.context, | |
| region_obj2->extra.region_context); | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_EXCEPTION((AE_INFO, status, "Returned by Handler for [%s]", | |
| acpi_ut_get_region_name(region_obj->region. | |
| space_id))); | |
| } | |
| if (!(handler_desc->address_space.handler_flags & | |
| ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) { | |
| /* | |
| * We just returned from a non-default handler, we must re-enter the | |
| * interpreter | |
| */ | |
| status2 = acpi_ex_enter_interpreter(); | |
| if (ACPI_FAILURE(status2)) { | |
| return_ACPI_STATUS(status2); | |
| } | |
| } | |
| return_ACPI_STATUS(status); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_detach_region | |
| * | |
| * PARAMETERS: region_obj - Region Object | |
| * acpi_ns_is_locked - Namespace Region Already Locked? | |
| * | |
| * RETURN: None | |
| * | |
| * DESCRIPTION: Break the association between the handler and the region | |
| * this is a two way association. | |
| * | |
| ******************************************************************************/ | |
| void | |
| acpi_ev_detach_region(union acpi_operand_object *region_obj, | |
| u8 acpi_ns_is_locked) | |
| { | |
| union acpi_operand_object *handler_obj; | |
| union acpi_operand_object *obj_desc; | |
| union acpi_operand_object **last_obj_ptr; | |
| acpi_adr_space_setup region_setup; | |
| void **region_context; | |
| union acpi_operand_object *region_obj2; | |
| acpi_status status; | |
| ACPI_FUNCTION_TRACE(ev_detach_region); | |
| region_obj2 = acpi_ns_get_secondary_object(region_obj); | |
| if (!region_obj2) { | |
| return_VOID; | |
| } | |
| region_context = ®ion_obj2->extra.region_context; | |
| /* Get the address handler from the region object */ | |
| handler_obj = region_obj->region.handler; | |
| if (!handler_obj) { | |
| /* This region has no handler, all done */ | |
| return_VOID; | |
| } | |
| /* Find this region in the handler's list */ | |
| obj_desc = handler_obj->address_space.region_list; | |
| last_obj_ptr = &handler_obj->address_space.region_list; | |
| while (obj_desc) { | |
| /* Is this the correct Region? */ | |
| if (obj_desc == region_obj) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "Removing Region %p from address handler %p\n", | |
| region_obj, handler_obj)); | |
| /* This is it, remove it from the handler's list */ | |
| *last_obj_ptr = obj_desc->region.next; | |
| obj_desc->region.next = NULL; /* Must clear field */ | |
| if (acpi_ns_is_locked) { | |
| status = | |
| acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); | |
| if (ACPI_FAILURE(status)) { | |
| return_VOID; | |
| } | |
| } | |
| /* Now stop region accesses by executing the _REG method */ | |
| status = acpi_ev_execute_reg_method(region_obj, 0); | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_EXCEPTION((AE_INFO, status, | |
| "from region _REG, [%s]", | |
| acpi_ut_get_region_name | |
| (region_obj->region.space_id))); | |
| } | |
| if (acpi_ns_is_locked) { | |
| status = | |
| acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); | |
| if (ACPI_FAILURE(status)) { | |
| return_VOID; | |
| } | |
| } | |
| /* | |
| * If the region has been activated, call the setup handler | |
| * with the deactivate notification | |
| */ | |
| if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) { | |
| region_setup = handler_obj->address_space.setup; | |
| status = | |
| region_setup(region_obj, | |
| ACPI_REGION_DEACTIVATE, | |
| handler_obj->address_space. | |
| context, region_context); | |
| /* Init routine may fail, Just ignore errors */ | |
| if (ACPI_FAILURE(status)) { | |
| ACPI_EXCEPTION((AE_INFO, status, | |
| "from region handler - deactivate, [%s]", | |
| acpi_ut_get_region_name | |
| (region_obj->region. | |
| space_id))); | |
| } | |
| region_obj->region.flags &= | |
| ~(AOPOBJ_SETUP_COMPLETE); | |
| } | |
| /* | |
| * Remove handler reference in the region | |
| * | |
| * NOTE: this doesn't mean that the region goes away, the region | |
| * is just inaccessible as indicated to the _REG method | |
| * | |
| * If the region is on the handler's list, this must be the | |
| * region's handler | |
| */ | |
| region_obj->region.handler = NULL; | |
| acpi_ut_remove_reference(handler_obj); | |
| return_VOID; | |
| } | |
| /* Walk the linked list of handlers */ | |
| last_obj_ptr = &obj_desc->region.next; | |
| obj_desc = obj_desc->region.next; | |
| } | |
| /* If we get here, the region was not in the handler's region list */ | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "Cannot remove region %p from address handler %p\n", | |
| region_obj, handler_obj)); | |
| return_VOID; | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_attach_region | |
| * | |
| * PARAMETERS: handler_obj - Handler Object | |
| * region_obj - Region Object | |
| * acpi_ns_is_locked - Namespace Region Already Locked? | |
| * | |
| * RETURN: None | |
| * | |
| * DESCRIPTION: Create the association between the handler and the region | |
| * this is a two way association. | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_attach_region(union acpi_operand_object *handler_obj, | |
| union acpi_operand_object *region_obj, | |
| u8 acpi_ns_is_locked) | |
| { | |
| ACPI_FUNCTION_TRACE(ev_attach_region); | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "Adding Region [%4.4s] %p to address handler %p [%s]\n", | |
| acpi_ut_get_node_name(region_obj->region.node), | |
| region_obj, handler_obj, | |
| acpi_ut_get_region_name(region_obj->region. | |
| space_id))); | |
| /* Link this region to the front of the handler's list */ | |
| region_obj->region.next = handler_obj->address_space.region_list; | |
| handler_obj->address_space.region_list = region_obj; | |
| /* Install the region's handler */ | |
| if (region_obj->region.handler) { | |
| return_ACPI_STATUS(AE_ALREADY_EXISTS); | |
| } | |
| region_obj->region.handler = handler_obj; | |
| acpi_ut_add_reference(handler_obj); | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_install_handler | |
| * | |
| * PARAMETERS: walk_namespace callback | |
| * | |
| * DESCRIPTION: This routine installs an address handler into objects that are | |
| * of type Region or Device. | |
| * | |
| * If the Object is a Device, and the device has a handler of | |
| * the same type then the search is terminated in that branch. | |
| * | |
| * This is because the existing handler is closer in proximity | |
| * to any more regions than the one we are trying to install. | |
| * | |
| ******************************************************************************/ | |
| static acpi_status | |
| acpi_ev_install_handler(acpi_handle obj_handle, | |
| u32 level, void *context, void **return_value) | |
| { | |
| union acpi_operand_object *handler_obj; | |
| union acpi_operand_object *next_handler_obj; | |
| union acpi_operand_object *obj_desc; | |
| struct acpi_namespace_node *node; | |
| acpi_status status; | |
| ACPI_FUNCTION_NAME(ev_install_handler); | |
| handler_obj = (union acpi_operand_object *)context; | |
| /* Parameter validation */ | |
| if (!handler_obj) { | |
| return (AE_OK); | |
| } | |
| /* Convert and validate the device handle */ | |
| node = acpi_ns_map_handle_to_node(obj_handle); | |
| if (!node) { | |
| return (AE_BAD_PARAMETER); | |
| } | |
| /* | |
| * We only care about regions.and objects | |
| * that are allowed to have address space handlers | |
| */ | |
| if ((node->type != ACPI_TYPE_DEVICE) && | |
| (node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) { | |
| return (AE_OK); | |
| } | |
| /* Check for an existing internal object */ | |
| obj_desc = acpi_ns_get_attached_object(node); | |
| if (!obj_desc) { | |
| /* No object, just exit */ | |
| return (AE_OK); | |
| } | |
| /* Devices are handled different than regions */ | |
| if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_DEVICE) { | |
| /* Check if this Device already has a handler for this address space */ | |
| next_handler_obj = obj_desc->device.handler; | |
| while (next_handler_obj) { | |
| /* Found a handler, is it for the same address space? */ | |
| if (next_handler_obj->address_space.space_id == | |
| handler_obj->address_space.space_id) { | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "Found handler for region [%s] in device %p(%p) handler %p\n", | |
| acpi_ut_get_region_name | |
| (handler_obj->address_space. | |
| space_id), obj_desc, | |
| next_handler_obj, | |
| handler_obj)); | |
| /* | |
| * Since the object we found it on was a device, then it | |
| * means that someone has already installed a handler for | |
| * the branch of the namespace from this device on. Just | |
| * bail out telling the walk routine to not traverse this | |
| * branch. This preserves the scoping rule for handlers. | |
| */ | |
| return (AE_CTRL_DEPTH); | |
| } | |
| /* Walk the linked list of handlers attached to this device */ | |
| next_handler_obj = next_handler_obj->address_space.next; | |
| } | |
| /* | |
| * As long as the device didn't have a handler for this | |
| * space we don't care about it. We just ignore it and | |
| * proceed. | |
| */ | |
| return (AE_OK); | |
| } | |
| /* Object is a Region */ | |
| if (obj_desc->region.space_id != handler_obj->address_space.space_id) { | |
| /* | |
| * This region is for a different address space | |
| * -- just ignore it | |
| */ | |
| return (AE_OK); | |
| } | |
| /* | |
| * Now we have a region and it is for the handler's address | |
| * space type. | |
| * | |
| * First disconnect region for any previous handler (if any) | |
| */ | |
| acpi_ev_detach_region(obj_desc, FALSE); | |
| /* Connect the region to the new handler */ | |
| status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE); | |
| return (status); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_install_space_handler | |
| * | |
| * PARAMETERS: Node - Namespace node for the device | |
| * space_id - The address space ID | |
| * Handler - Address of the handler | |
| * Setup - Address of the setup function | |
| * Context - Value passed to the handler on each access | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Install a handler for all op_regions of a given space_id. | |
| * Assumes namespace is locked | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_install_space_handler(struct acpi_namespace_node * node, | |
| acpi_adr_space_type space_id, | |
| acpi_adr_space_handler handler, | |
| acpi_adr_space_setup setup, void *context) | |
| { | |
| union acpi_operand_object *obj_desc; | |
| union acpi_operand_object *handler_obj; | |
| acpi_status status; | |
| acpi_object_type type; | |
| u8 flags = 0; | |
| ACPI_FUNCTION_TRACE(ev_install_space_handler); | |
| /* | |
| * This registration is valid for only the types below | |
| * and the root. This is where the default handlers | |
| * get placed. | |
| */ | |
| if ((node->type != ACPI_TYPE_DEVICE) && | |
| (node->type != ACPI_TYPE_PROCESSOR) && | |
| (node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) { | |
| status = AE_BAD_PARAMETER; | |
| goto unlock_and_exit; | |
| } | |
| if (handler == ACPI_DEFAULT_HANDLER) { | |
| flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED; | |
| switch (space_id) { | |
| case ACPI_ADR_SPACE_SYSTEM_MEMORY: | |
| handler = acpi_ex_system_memory_space_handler; | |
| setup = acpi_ev_system_memory_region_setup; | |
| break; | |
| case ACPI_ADR_SPACE_SYSTEM_IO: | |
| handler = acpi_ex_system_io_space_handler; | |
| setup = acpi_ev_io_space_region_setup; | |
| break; | |
| case ACPI_ADR_SPACE_PCI_CONFIG: | |
| handler = acpi_ex_pci_config_space_handler; | |
| setup = acpi_ev_pci_config_region_setup; | |
| break; | |
| case ACPI_ADR_SPACE_CMOS: | |
| handler = acpi_ex_cmos_space_handler; | |
| setup = acpi_ev_cmos_region_setup; | |
| break; | |
| case ACPI_ADR_SPACE_PCI_BAR_TARGET: | |
| handler = acpi_ex_pci_bar_space_handler; | |
| setup = acpi_ev_pci_bar_region_setup; | |
| break; | |
| case ACPI_ADR_SPACE_DATA_TABLE: | |
| handler = acpi_ex_data_table_space_handler; | |
| setup = NULL; | |
| break; | |
| default: | |
| status = AE_BAD_PARAMETER; | |
| goto unlock_and_exit; | |
| } | |
| } | |
| /* If the caller hasn't specified a setup routine, use the default */ | |
| if (!setup) { | |
| setup = acpi_ev_default_region_setup; | |
| } | |
| /* Check for an existing internal object */ | |
| obj_desc = acpi_ns_get_attached_object(node); | |
| if (obj_desc) { | |
| /* | |
| * The attached device object already exists. | |
| * Make sure the handler is not already installed. | |
| */ | |
| handler_obj = obj_desc->device.handler; | |
| /* Walk the handler list for this device */ | |
| while (handler_obj) { | |
| /* Same space_id indicates a handler already installed */ | |
| if (handler_obj->address_space.space_id == space_id) { | |
| if (handler_obj->address_space.handler == | |
| handler) { | |
| /* | |
| * It is (relatively) OK to attempt to install the SAME | |
| * handler twice. This can easily happen | |
| * with PCI_Config space. | |
| */ | |
| status = AE_SAME_HANDLER; | |
| goto unlock_and_exit; | |
| } else { | |
| /* A handler is already installed */ | |
| status = AE_ALREADY_EXISTS; | |
| } | |
| goto unlock_and_exit; | |
| } | |
| /* Walk the linked list of handlers */ | |
| handler_obj = handler_obj->address_space.next; | |
| } | |
| } else { | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "Creating object on Device %p while installing handler\n", | |
| node)); | |
| /* obj_desc does not exist, create one */ | |
| if (node->type == ACPI_TYPE_ANY) { | |
| type = ACPI_TYPE_DEVICE; | |
| } else { | |
| type = node->type; | |
| } | |
| obj_desc = acpi_ut_create_internal_object(type); | |
| if (!obj_desc) { | |
| status = AE_NO_MEMORY; | |
| goto unlock_and_exit; | |
| } | |
| /* Init new descriptor */ | |
| obj_desc->common.type = (u8) type; | |
| /* Attach the new object to the Node */ | |
| status = acpi_ns_attach_object(node, obj_desc, type); | |
| /* Remove local reference to the object */ | |
| acpi_ut_remove_reference(obj_desc); | |
| if (ACPI_FAILURE(status)) { | |
| goto unlock_and_exit; | |
| } | |
| } | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n", | |
| acpi_ut_get_region_name(space_id), space_id, | |
| acpi_ut_get_node_name(node), node, obj_desc)); | |
| /* | |
| * Install the handler | |
| * | |
| * At this point there is no existing handler. | |
| * Just allocate the object for the handler and link it | |
| * into the list. | |
| */ | |
| handler_obj = | |
| acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER); | |
| if (!handler_obj) { | |
| status = AE_NO_MEMORY; | |
| goto unlock_and_exit; | |
| } | |
| /* Init handler obj */ | |
| handler_obj->address_space.space_id = (u8) space_id; | |
| handler_obj->address_space.handler_flags = flags; | |
| handler_obj->address_space.region_list = NULL; | |
| handler_obj->address_space.node = node; | |
| handler_obj->address_space.handler = handler; | |
| handler_obj->address_space.context = context; | |
| handler_obj->address_space.setup = setup; | |
| /* Install at head of Device.address_space list */ | |
| handler_obj->address_space.next = obj_desc->device.handler; | |
| /* | |
| * The Device object is the first reference on the handler_obj. | |
| * Each region that uses the handler adds a reference. | |
| */ | |
| obj_desc->device.handler = handler_obj; | |
| /* | |
| * Walk the namespace finding all of the regions this | |
| * handler will manage. | |
| * | |
| * Start at the device and search the branch toward | |
| * the leaf nodes until either the leaf is encountered or | |
| * a device is detected that has an address handler of the | |
| * same type. | |
| * | |
| * In either case, back up and search down the remainder | |
| * of the branch | |
| */ | |
| status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX, | |
| ACPI_NS_WALK_UNLOCK, | |
| acpi_ev_install_handler, handler_obj, | |
| NULL); | |
| unlock_and_exit: | |
| return_ACPI_STATUS(status); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_execute_reg_methods | |
| * | |
| * PARAMETERS: Node - Namespace node for the device | |
| * space_id - The address space ID | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Run all _REG methods for the input Space ID; | |
| * Note: assumes namespace is locked, or system init time. | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_execute_reg_methods(struct acpi_namespace_node *node, | |
| acpi_adr_space_type space_id) | |
| { | |
| acpi_status status; | |
| ACPI_FUNCTION_TRACE(ev_execute_reg_methods); | |
| /* | |
| * Run all _REG methods for all Operation Regions for this | |
| * space ID. This is a separate walk in order to handle any | |
| * interdependencies between regions and _REG methods. (i.e. handlers | |
| * must be installed for all regions of this Space ID before we | |
| * can run any _REG methods) | |
| */ | |
| status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX, | |
| ACPI_NS_WALK_UNLOCK, acpi_ev_reg_run, | |
| &space_id, NULL); | |
| return_ACPI_STATUS(status); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_reg_run | |
| * | |
| * PARAMETERS: walk_namespace callback | |
| * | |
| * DESCRIPTION: Run _REG method for region objects of the requested space_iD | |
| * | |
| ******************************************************************************/ | |
| static acpi_status | |
| acpi_ev_reg_run(acpi_handle obj_handle, | |
| u32 level, void *context, void **return_value) | |
| { | |
| union acpi_operand_object *obj_desc; | |
| struct acpi_namespace_node *node; | |
| acpi_adr_space_type space_id; | |
| acpi_status status; | |
| space_id = *ACPI_CAST_PTR(acpi_adr_space_type, context); | |
| /* Convert and validate the device handle */ | |
| node = acpi_ns_map_handle_to_node(obj_handle); | |
| if (!node) { | |
| return (AE_BAD_PARAMETER); | |
| } | |
| /* | |
| * We only care about regions.and objects | |
| * that are allowed to have address space handlers | |
| */ | |
| if ((node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) { | |
| return (AE_OK); | |
| } | |
| /* Check for an existing internal object */ | |
| obj_desc = acpi_ns_get_attached_object(node); | |
| if (!obj_desc) { | |
| /* No object, just exit */ | |
| return (AE_OK); | |
| } | |
| /* Object is a Region */ | |
| if (obj_desc->region.space_id != space_id) { | |
| /* | |
| * This region is for a different address space | |
| * -- just ignore it | |
| */ | |
| return (AE_OK); | |
| } | |
| status = acpi_ev_execute_reg_method(obj_desc, 1); | |
| return (status); | |
| } |