| /****************************************************************************** | |
| * | |
| * Module Name: evrgnini- ACPI address_space (op_region) init | |
| * | |
| *****************************************************************************/ | |
| /* | |
| * Copyright (C) 2000 - 2006, R. Byron Moore | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer | |
| * substantially similar to the "NO WARRANTY" disclaimer below | |
| * ("Disclaimer") and any redistribution must be conditioned upon | |
| * including a substantially similar Disclaimer requirement for further | |
| * binary redistribution. | |
| * 3. Neither the names of the above-listed copyright holders nor the names | |
| * of any contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * Alternatively, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2 as published by the Free | |
| * Software Foundation. | |
| * | |
| * NO WARRANTY | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGES. | |
| */ | |
| #include <acpi/acpi.h> | |
| #include <acpi/acevents.h> | |
| #include <acpi/acnamesp.h> | |
| #define _COMPONENT ACPI_EVENTS | |
| ACPI_MODULE_NAME("evrgnini") | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_system_memory_region_setup | |
| * | |
| * PARAMETERS: Handle - Region we are interested in | |
| * Function - Start or stop | |
| * handler_context - Address space handler context | |
| * region_context - Region specific context | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Setup a system_memory operation region | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_system_memory_region_setup(acpi_handle handle, | |
| u32 function, | |
| void *handler_context, void **region_context) | |
| { | |
| union acpi_operand_object *region_desc = | |
| (union acpi_operand_object *)handle; | |
| struct acpi_mem_space_context *local_region_context; | |
| ACPI_FUNCTION_TRACE(ev_system_memory_region_setup); | |
| if (function == ACPI_REGION_DEACTIVATE) { | |
| if (*region_context) { | |
| local_region_context = | |
| (struct acpi_mem_space_context *)*region_context; | |
| /* Delete a cached mapping if present */ | |
| if (local_region_context->mapped_length) { | |
| acpi_os_unmap_memory(local_region_context-> | |
| mapped_logical_address, | |
| local_region_context-> | |
| mapped_length); | |
| } | |
| ACPI_FREE(local_region_context); | |
| *region_context = NULL; | |
| } | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| /* Create a new context */ | |
| local_region_context = | |
| ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_mem_space_context)); | |
| if (!(local_region_context)) { | |
| return_ACPI_STATUS(AE_NO_MEMORY); | |
| } | |
| /* Save the region length and address for use in the handler */ | |
| local_region_context->length = region_desc->region.length; | |
| local_region_context->address = region_desc->region.address; | |
| *region_context = local_region_context; | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_io_space_region_setup | |
| * | |
| * PARAMETERS: Handle - Region we are interested in | |
| * Function - Start or stop | |
| * handler_context - Address space handler context | |
| * region_context - Region specific context | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Setup a IO operation region | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_io_space_region_setup(acpi_handle handle, | |
| u32 function, | |
| void *handler_context, void **region_context) | |
| { | |
| ACPI_FUNCTION_TRACE(ev_io_space_region_setup); | |
| if (function == ACPI_REGION_DEACTIVATE) { | |
| *region_context = NULL; | |
| } else { | |
| *region_context = handler_context; | |
| } | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_pci_config_region_setup | |
| * | |
| * PARAMETERS: Handle - Region we are interested in | |
| * Function - Start or stop | |
| * handler_context - Address space handler context | |
| * region_context - Region specific context | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Setup a PCI_Config operation region | |
| * | |
| * MUTEX: Assumes namespace is not locked | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_pci_config_region_setup(acpi_handle handle, | |
| u32 function, | |
| void *handler_context, void **region_context) | |
| { | |
| acpi_status status = AE_OK; | |
| acpi_integer pci_value; | |
| struct acpi_pci_id *pci_id = *region_context; | |
| union acpi_operand_object *handler_obj; | |
| struct acpi_namespace_node *parent_node; | |
| struct acpi_namespace_node *pci_root_node; | |
| union acpi_operand_object *region_obj = | |
| (union acpi_operand_object *)handle; | |
| struct acpi_device_id object_hID; | |
| ACPI_FUNCTION_TRACE(ev_pci_config_region_setup); | |
| handler_obj = region_obj->region.handler; | |
| if (!handler_obj) { | |
| /* | |
| * No installed handler. This shouldn't happen because the dispatch | |
| * routine checks before we get here, but we check again just in case. | |
| */ | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "Attempting to init a region %p, with no handler\n", | |
| region_obj)); | |
| return_ACPI_STATUS(AE_NOT_EXIST); | |
| } | |
| *region_context = NULL; | |
| if (function == ACPI_REGION_DEACTIVATE) { | |
| if (pci_id) { | |
| ACPI_FREE(pci_id); | |
| } | |
| return_ACPI_STATUS(status); | |
| } | |
| parent_node = acpi_ns_get_parent_node(region_obj->region.node); | |
| /* | |
| * Get the _SEG and _BBN values from the device upon which the handler | |
| * is installed. | |
| * | |
| * We need to get the _SEG and _BBN objects relative to the PCI BUS device. | |
| * This is the device the handler has been registered to handle. | |
| */ | |
| /* | |
| * If the address_space.Node is still pointing to the root, we need | |
| * to scan upward for a PCI Root bridge and re-associate the op_region | |
| * handlers with that device. | |
| */ | |
| if (handler_obj->address_space.node == acpi_gbl_root_node) { | |
| /* Start search from the parent object */ | |
| pci_root_node = parent_node; | |
| while (pci_root_node != acpi_gbl_root_node) { | |
| status = | |
| acpi_ut_execute_HID(pci_root_node, &object_hID); | |
| if (ACPI_SUCCESS(status)) { | |
| /* | |
| * Got a valid _HID string, check if this is a PCI root. | |
| * New for ACPI 3.0: check for a PCI Express root also. | |
| */ | |
| if (! | |
| (ACPI_STRNCMP | |
| (object_hID.value, PCI_ROOT_HID_STRING, | |
| sizeof(PCI_ROOT_HID_STRING))) | |
| || | |
| !(ACPI_STRNCMP | |
| (object_hID.value, | |
| PCI_EXPRESS_ROOT_HID_STRING, | |
| sizeof(PCI_EXPRESS_ROOT_HID_STRING)))) { | |
| /* Install a handler for this PCI root bridge */ | |
| status = | |
| acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL); | |
| if (ACPI_FAILURE(status)) { | |
| if (status == AE_SAME_HANDLER) { | |
| /* | |
| * It is OK if the handler is already installed on the root | |
| * bridge. Still need to return a context object for the | |
| * new PCI_Config operation region, however. | |
| */ | |
| status = AE_OK; | |
| } else { | |
| ACPI_EXCEPTION((AE_INFO, | |
| status, | |
| "Could not install PciConfig handler for Root Bridge %4.4s", | |
| acpi_ut_get_node_name | |
| (pci_root_node))); | |
| } | |
| } | |
| break; | |
| } | |
| } | |
| pci_root_node = acpi_ns_get_parent_node(pci_root_node); | |
| } | |
| /* PCI root bridge not found, use namespace root node */ | |
| } else { | |
| pci_root_node = handler_obj->address_space.node; | |
| } | |
| /* | |
| * If this region is now initialized, we are done. | |
| * (install_address_space_handler could have initialized it) | |
| */ | |
| if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) { | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| /* Region is still not initialized. Create a new context */ | |
| pci_id = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pci_id)); | |
| if (!pci_id) { | |
| return_ACPI_STATUS(AE_NO_MEMORY); | |
| } | |
| /* | |
| * For PCI_Config space access, we need the segment, bus, | |
| * device and function numbers. Acquire them here. | |
| */ | |
| /* | |
| * Get the PCI device and function numbers from the _ADR object | |
| * contained in the parent's scope. | |
| */ | |
| status = | |
| acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, parent_node, | |
| &pci_value); | |
| /* | |
| * The default is zero, and since the allocation above zeroed | |
| * the data, just do nothing on failure. | |
| */ | |
| if (ACPI_SUCCESS(status)) { | |
| pci_id->device = ACPI_HIWORD(ACPI_LODWORD(pci_value)); | |
| pci_id->function = ACPI_LOWORD(ACPI_LODWORD(pci_value)); | |
| } | |
| /* The PCI segment number comes from the _SEG method */ | |
| status = | |
| acpi_ut_evaluate_numeric_object(METHOD_NAME__SEG, pci_root_node, | |
| &pci_value); | |
| if (ACPI_SUCCESS(status)) { | |
| pci_id->segment = ACPI_LOWORD(pci_value); | |
| } | |
| /* The PCI bus number comes from the _BBN method */ | |
| status = | |
| acpi_ut_evaluate_numeric_object(METHOD_NAME__BBN, pci_root_node, | |
| &pci_value); | |
| if (ACPI_SUCCESS(status)) { | |
| pci_id->bus = ACPI_LOWORD(pci_value); | |
| } | |
| /* Complete this device's pci_id */ | |
| acpi_os_derive_pci_id(pci_root_node, region_obj->region.node, &pci_id); | |
| *region_context = pci_id; | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_pci_bar_region_setup | |
| * | |
| * PARAMETERS: Handle - Region we are interested in | |
| * Function - Start or stop | |
| * handler_context - Address space handler context | |
| * region_context - Region specific context | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Setup a pci_bAR operation region | |
| * | |
| * MUTEX: Assumes namespace is not locked | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_pci_bar_region_setup(acpi_handle handle, | |
| u32 function, | |
| void *handler_context, void **region_context) | |
| { | |
| ACPI_FUNCTION_TRACE(ev_pci_bar_region_setup); | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_cmos_region_setup | |
| * | |
| * PARAMETERS: Handle - Region we are interested in | |
| * Function - Start or stop | |
| * handler_context - Address space handler context | |
| * region_context - Region specific context | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Setup a CMOS operation region | |
| * | |
| * MUTEX: Assumes namespace is not locked | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_cmos_region_setup(acpi_handle handle, | |
| u32 function, | |
| void *handler_context, void **region_context) | |
| { | |
| ACPI_FUNCTION_TRACE(ev_cmos_region_setup); | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_default_region_setup | |
| * | |
| * PARAMETERS: Handle - Region we are interested in | |
| * Function - Start or stop | |
| * handler_context - Address space handler context | |
| * region_context - Region specific context | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Default region initialization | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_default_region_setup(acpi_handle handle, | |
| u32 function, | |
| void *handler_context, void **region_context) | |
| { | |
| ACPI_FUNCTION_TRACE(ev_default_region_setup); | |
| if (function == ACPI_REGION_DEACTIVATE) { | |
| *region_context = NULL; | |
| } else { | |
| *region_context = handler_context; | |
| } | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| /******************************************************************************* | |
| * | |
| * FUNCTION: acpi_ev_initialize_region | |
| * | |
| * PARAMETERS: region_obj - Region we are initializing | |
| * acpi_ns_locked - Is namespace locked? | |
| * | |
| * RETURN: Status | |
| * | |
| * DESCRIPTION: Initializes the region, finds any _REG methods and saves them | |
| * for execution at a later time | |
| * | |
| * Get the appropriate address space handler for a newly | |
| * created region. | |
| * | |
| * This also performs address space specific initialization. For | |
| * example, PCI regions must have an _ADR object that contains | |
| * a PCI address in the scope of the definition. This address is | |
| * required to perform an access to PCI config space. | |
| * | |
| ******************************************************************************/ | |
| acpi_status | |
| acpi_ev_initialize_region(union acpi_operand_object *region_obj, | |
| u8 acpi_ns_locked) | |
| { | |
| union acpi_operand_object *handler_obj; | |
| union acpi_operand_object *obj_desc; | |
| acpi_adr_space_type space_id; | |
| struct acpi_namespace_node *node; | |
| acpi_status status; | |
| struct acpi_namespace_node *method_node; | |
| acpi_name *reg_name_ptr = (acpi_name *) METHOD_NAME__REG; | |
| union acpi_operand_object *region_obj2; | |
| ACPI_FUNCTION_TRACE_U32(ev_initialize_region, acpi_ns_locked); | |
| if (!region_obj) { | |
| return_ACPI_STATUS(AE_BAD_PARAMETER); | |
| } | |
| if (region_obj->common.flags & AOPOBJ_OBJECT_INITIALIZED) { | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| region_obj2 = acpi_ns_get_secondary_object(region_obj); | |
| if (!region_obj2) { | |
| return_ACPI_STATUS(AE_NOT_EXIST); | |
| } | |
| node = acpi_ns_get_parent_node(region_obj->region.node); | |
| space_id = region_obj->region.space_id; | |
| /* Setup defaults */ | |
| region_obj->region.handler = NULL; | |
| region_obj2->extra.method_REG = NULL; | |
| region_obj->common.flags &= ~(AOPOBJ_SETUP_COMPLETE); | |
| region_obj->common.flags |= AOPOBJ_OBJECT_INITIALIZED; | |
| /* Find any "_REG" method associated with this region definition */ | |
| status = | |
| acpi_ns_search_one_scope(*reg_name_ptr, node, ACPI_TYPE_METHOD, | |
| &method_node); | |
| if (ACPI_SUCCESS(status)) { | |
| /* | |
| * The _REG method is optional and there can be only one per region | |
| * definition. This will be executed when the handler is attached | |
| * or removed | |
| */ | |
| region_obj2->extra.method_REG = method_node; | |
| } | |
| /* | |
| * The following loop depends upon the root Node having no parent | |
| * ie: acpi_gbl_root_node->parent_entry being set to NULL | |
| */ | |
| while (node) { | |
| /* Check to see if a handler exists */ | |
| handler_obj = NULL; | |
| obj_desc = acpi_ns_get_attached_object(node); | |
| if (obj_desc) { | |
| /* Can only be a handler if the object exists */ | |
| switch (node->type) { | |
| case ACPI_TYPE_DEVICE: | |
| handler_obj = obj_desc->device.handler; | |
| break; | |
| case ACPI_TYPE_PROCESSOR: | |
| handler_obj = obj_desc->processor.handler; | |
| break; | |
| case ACPI_TYPE_THERMAL: | |
| handler_obj = obj_desc->thermal_zone.handler; | |
| break; | |
| default: | |
| /* Ignore other objects */ | |
| break; | |
| } | |
| while (handler_obj) { | |
| /* Is this handler of the correct type? */ | |
| if (handler_obj->address_space.space_id == | |
| space_id) { | |
| /* Found correct handler */ | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "Found handler %p for region %p in obj %p\n", | |
| handler_obj, | |
| region_obj, | |
| obj_desc)); | |
| status = | |
| acpi_ev_attach_region(handler_obj, | |
| region_obj, | |
| acpi_ns_locked); | |
| /* | |
| * Tell all users that this region is usable by running the _REG | |
| * method | |
| */ | |
| if (acpi_ns_locked) { | |
| status = | |
| acpi_ut_release_mutex | |
| (ACPI_MTX_NAMESPACE); | |
| if (ACPI_FAILURE(status)) { | |
| return_ACPI_STATUS | |
| (status); | |
| } | |
| } | |
| status = | |
| acpi_ev_execute_reg_method | |
| (region_obj, 1); | |
| if (acpi_ns_locked) { | |
| status = | |
| acpi_ut_acquire_mutex | |
| (ACPI_MTX_NAMESPACE); | |
| if (ACPI_FAILURE(status)) { | |
| return_ACPI_STATUS | |
| (status); | |
| } | |
| } | |
| return_ACPI_STATUS(AE_OK); | |
| } | |
| /* Try next handler in the list */ | |
| handler_obj = handler_obj->address_space.next; | |
| } | |
| } | |
| /* | |
| * This node does not have the handler we need; | |
| * Pop up one level | |
| */ | |
| node = acpi_ns_get_parent_node(node); | |
| } | |
| /* If we get here, there is no handler for this region */ | |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, | |
| "No handler for RegionType %s(%X) (RegionObj %p)\n", | |
| acpi_ut_get_region_name(space_id), space_id, | |
| region_obj)); | |
| return_ACPI_STATUS(AE_NOT_EXIST); | |
| } |