| # | |
| # SATA/PATA driver configuration | |
| # | |
| menu "Serial ATA (prod) and Parallel ATA (experimental) drivers" | |
| config ATA | |
| tristate "ATA device support" | |
| depends on BLOCK | |
| depends on !(M32R || M68K) || BROKEN | |
| depends on !SUN4 || BROKEN | |
| select SCSI | |
| ---help--- | |
| If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or | |
| any other ATA device under Linux, say Y and make sure that you know | |
| the name of your ATA host adapter (the card inside your computer | |
| that "speaks" the ATA protocol, also called ATA controller), | |
| because you will be asked for it. | |
| if ATA | |
| config SATA_AHCI | |
| tristate "AHCI SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for AHCI Serial ATA. | |
| If unsure, say N. | |
| config SATA_SVW | |
| tristate "ServerWorks Frodo / Apple K2 SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Broadcom/Serverworks/Apple K2 | |
| SATA support. | |
| If unsure, say N. | |
| config ATA_PIIX | |
| tristate "Intel PIIX/ICH SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for ICH5/6/7/8 Serial ATA. | |
| If PATA support was enabled previously, this enables | |
| support for select Intel PIIX/ICH PATA host controllers. | |
| If unsure, say N. | |
| config SATA_MV | |
| tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the Marvell Serial ATA family. | |
| Currently supports 88SX[56]0[48][01] chips. | |
| If unsure, say N. | |
| config SATA_NV | |
| tristate "NVIDIA SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for NVIDIA Serial ATA. | |
| If unsure, say N. | |
| config PDC_ADMA | |
| tristate "Pacific Digital ADMA support" | |
| depends on PCI | |
| help | |
| This option enables support for Pacific Digital ADMA controllers | |
| If unsure, say N. | |
| config SATA_QSTOR | |
| tristate "Pacific Digital SATA QStor support" | |
| depends on PCI | |
| help | |
| This option enables support for Pacific Digital Serial ATA QStor. | |
| If unsure, say N. | |
| config SATA_PROMISE | |
| tristate "Promise SATA TX2/TX4 support" | |
| depends on PCI | |
| help | |
| This option enables support for Promise Serial ATA TX2/TX4. | |
| If unsure, say N. | |
| config SATA_SX4 | |
| tristate "Promise SATA SX4 support" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for Promise Serial ATA SX4. | |
| If unsure, say N. | |
| config SATA_SIL | |
| tristate "Silicon Image SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Silicon Image Serial ATA. | |
| If unsure, say N. | |
| config SATA_SIL24 | |
| tristate "Silicon Image 3124/3132 SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Silicon Image 3124/3132 Serial ATA. | |
| If unsure, say N. | |
| config SATA_SIS | |
| tristate "SiS 964/180 SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for SiS Serial ATA 964/180. | |
| If unsure, say N. | |
| config SATA_ULI | |
| tristate "ULi Electronics SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for ULi Electronics SATA. | |
| If unsure, say N. | |
| config SATA_VIA | |
| tristate "VIA SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for VIA Serial ATA. | |
| If unsure, say N. | |
| config SATA_VITESSE | |
| tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" | |
| depends on PCI | |
| help | |
| This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. | |
| If unsure, say N. | |
| config SATA_INTEL_COMBINED | |
| bool | |
| depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX) | |
| default y | |
| config PATA_ALI | |
| tristate "ALi PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the ALi ATA interfaces | |
| found on the many ALi chipsets. | |
| If unsure, say N. | |
| config PATA_AMD | |
| tristate "AMD/NVidia PATA support (Experimental)" | |
| depends on PCI | |
| help | |
| This option enables support for the AMD and NVidia PATA | |
| interfaces found on the chipsets for Athlon/Athlon64. | |
| If unsure, say N. | |
| config PATA_ARTOP | |
| tristate "ARTOP 6210/6260 PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for ARTOP PATA controllers. | |
| If unsure, say N. | |
| config PATA_ATIIXP | |
| tristate "ATI PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the ATI ATA interfaces | |
| found on the many ATI chipsets. | |
| If unsure, say N. | |
| config PATA_CMD64X | |
| tristate "CMD64x PATA support (Very Experimental)" | |
| depends on PCI&& EXPERIMENTAL | |
| help | |
| This option enables support for the CMD64x series chips | |
| except for the CMD640. | |
| If unsure, say N. | |
| config PATA_CS5520 | |
| tristate "CS5510/5520 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the Cyrix 5510/5520 | |
| companion chip used with the MediaGX/Geode processor family. | |
| If unsure, say N. | |
| config PATA_CS5530 | |
| tristate "CS5530 PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the Cyrix/NatSemi/AMD CS5530 | |
| companion chip used with the MediaGX/Geode processor family. | |
| If unsure, say N. | |
| config PATA_CS5535 | |
| tristate "CS5535 PATA support (Experimental)" | |
| depends on PCI && X86 && !X86_64 && EXPERIMENTAL | |
| help | |
| This option enables support for the NatSemi/AMD CS5535 | |
| companion chip used with the Geode processor family. | |
| If unsure, say N. | |
| config PATA_CYPRESS | |
| tristate "Cypress CY82C693 PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the Cypress/Contaq CY82C693 | |
| chipset found in some Alpha systems | |
| If unsure, say N. | |
| config PATA_EFAR | |
| tristate "EFAR SLC90E66 support" | |
| depends on PCI | |
| help | |
| This option enables support for the EFAR SLC90E66 | |
| IDE controller found on some older machines. | |
| If unsure, say N. | |
| config ATA_GENERIC | |
| tristate "Generic ATA support" | |
| depends on PCI | |
| help | |
| This option enables support for generic BIOS configured | |
| ATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_HPT366 | |
| tristate "HPT 366/368 PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the HPT 366 and 368 | |
| PATA controllers via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_HPT37X | |
| tristate "HPT 370/370A/371/372/374/302 PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the majority of the later HPT | |
| PATA controllers via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_HPT3X2N | |
| tristate "HPT 372N/302N PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the N variant HPT PATA | |
| controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_HPT3X3 | |
| tristate "HPT 343/363 PATA support (Experimental)" | |
| depends on PCI | |
| help | |
| This option enables support for the HPT 343/363 | |
| PATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_ISAPNP | |
| tristate "ISA Plug and Play PATA support (Very Experimental)" | |
| depends on EXPERIMENTAL && ISAPNP | |
| help | |
| This option enables support for ISA plug & play ATA | |
| controllers such as those found on old soundcards. | |
| If unsure, say N. | |
| config PATA_IT821X | |
| tristate "IT821x PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the ITE 8211 and 8212 | |
| PATA controllers via the new ATA layer, including RAID | |
| mode. | |
| If unsure, say N. | |
| config PATA_JMICRON | |
| tristate "JMicron PATA support" | |
| depends on PCI | |
| help | |
| Enable support for the JMicron IDE controller, via the new | |
| ATA layer. | |
| If unsure, say N. | |
| config PATA_LEGACY | |
| tristate "Legacy ISA PATA support (Experimental)" | |
| depends on ISA && EXPERIMENTAL | |
| help | |
| This option enables support for ISA/VLB bus legacy PATA | |
| ports and allows them to be accessed via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_TRIFLEX | |
| tristate "Compaq Triflex PATA support" | |
| depends on PCI | |
| help | |
| Enable support for the Compaq 'Triflex' IDE controller as found | |
| on many Compaq Pentium-Pro systems, via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_MPIIX | |
| tristate "Intel PATA MPIIX support" | |
| depends on PCI | |
| help | |
| This option enables support for MPIIX PATA support. | |
| If unsure, say N. | |
| config PATA_OLDPIIX | |
| tristate "Intel PATA old PIIX support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for old(?) PIIX PATA support. | |
| If unsure, say N. | |
| config PATA_NETCELL | |
| tristate "NETCELL Revolution RAID support" | |
| depends on PCI | |
| help | |
| This option enables support for the Netcell Revolution RAID | |
| PATA controller. | |
| If unsure, say N. | |
| config PATA_NS87410 | |
| tristate "Nat Semi NS87410 PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the National Semiconductor | |
| NS87410 PCI-IDE controller. | |
| If unsure, say N. | |
| config PATA_OPTI | |
| tristate "OPTI621/6215 PATA support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables full PIO support for the early Opti ATA | |
| controllers found on some old motherboards. | |
| If unsure, say N. | |
| config PATA_OPTIDMA | |
| tristate "OPTI FireStar PATA support (Veyr Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables DMA/PIO support for the later OPTi | |
| controllers found on some old motherboards and in some | |
| latops | |
| If unsure, say N. | |
| config PATA_PCMCIA | |
| tristate "PCMCIA PATA support" | |
| depends on PCMCIA | |
| help | |
| This option enables support for PCMCIA ATA interfaces, including | |
| compact flash card adapters via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_PDC_OLD | |
| tristate "Older Promise PATA controller support (Very Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the Promise 20246, 20262, 20263, | |
| 20265 and 20267 adapters. | |
| If unsure, say N. | |
| config PATA_QDI | |
| tristate "QDI VLB PATA support" | |
| depends on ISA | |
| help | |
| Support for QDI 6500 and 6580 PATA controllers on VESA local bus. | |
| config PATA_RADISYS | |
| tristate "RADISYS 82600 PATA support (Very experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the RADISYS 82600 | |
| PATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_RZ1000 | |
| tristate "PC Tech RZ1000 PATA support" | |
| depends on PCI | |
| help | |
| This option enables basic support for the PC Tech RZ1000/1 | |
| PATA controllers via the new ATA layer | |
| If unsure, say N. | |
| config PATA_SC1200 | |
| tristate "SC1200 PATA support (Raving Lunatic)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the NatSemi/AMD SC1200 SoC | |
| companion chip used with the Geode processor family. | |
| If unsure, say N. | |
| config PATA_SERVERWORKS | |
| tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for the Serverworks OSB4/CSB5/CSB6 and | |
| HT1000 PATA controllers, via the new ATA layer. | |
| If unsure, say N. | |
| config PATA_PDC2027X | |
| tristate "Promise PATA 2027x support" | |
| depends on PCI | |
| help | |
| This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. | |
| If unsure, say N. | |
| config PATA_SIL680 | |
| tristate "CMD / Silicon Image 680 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for CMD / Silicon Image 680 PATA. | |
| If unsure, say N. | |
| config PATA_SIS | |
| tristate "SiS PATA support (Experimental)" | |
| depends on PCI && EXPERIMENTAL | |
| help | |
| This option enables support for SiS PATA controllers | |
| If unsure, say N. | |
| config PATA_VIA | |
| tristate "VIA PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for the VIA PATA interfaces | |
| found on the many VIA chipsets. | |
| If unsure, say N. | |
| config PATA_WINBOND | |
| tristate "Winbond SL82C105 PATA support" | |
| depends on PCI | |
| help | |
| This option enables support for SL82C105 PATA devices found in the | |
| Netwinder and some other systems | |
| If unsure, say N. | |
| endif | |
| endmenu | |