| /* | |
| * ahci.c - AHCI SATA support | |
| * | |
| * Maintained by: Jeff Garzik <jgarzik@pobox.com> | |
| * Please ALWAYS copy linux-ide@vger.kernel.org | |
| * on emails. | |
| * | |
| * Copyright 2004-2005 Red Hat, Inc. | |
| * | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; see the file COPYING. If not, write to | |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| * | |
| * libata documentation is available via 'make {ps|pdf}docs', | |
| * as Documentation/DocBook/libata.* | |
| * | |
| * AHCI hardware documentation: | |
| * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf | |
| * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/init.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/sched.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/device.h> | |
| #include <scsi/scsi_host.h> | |
| #include <scsi/scsi_cmnd.h> | |
| #include <linux/libata.h> | |
| #include <asm/io.h> | |
| #define DRV_NAME "ahci" | |
| #define DRV_VERSION "2.0" | |
| enum { | |
| AHCI_PCI_BAR = 5, | |
| AHCI_MAX_SG = 168, /* hardware max is 64K */ | |
| AHCI_DMA_BOUNDARY = 0xffffffff, | |
| AHCI_USE_CLUSTERING = 0, | |
| AHCI_MAX_CMDS = 32, | |
| AHCI_CMD_SZ = 32, | |
| AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, | |
| AHCI_RX_FIS_SZ = 256, | |
| AHCI_CMD_TBL_CDB = 0x40, | |
| AHCI_CMD_TBL_HDR_SZ = 0x80, | |
| AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), | |
| AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, | |
| AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + | |
| AHCI_RX_FIS_SZ, | |
| AHCI_IRQ_ON_SG = (1 << 31), | |
| AHCI_CMD_ATAPI = (1 << 5), | |
| AHCI_CMD_WRITE = (1 << 6), | |
| AHCI_CMD_PREFETCH = (1 << 7), | |
| AHCI_CMD_RESET = (1 << 8), | |
| AHCI_CMD_CLR_BUSY = (1 << 10), | |
| RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ | |
| RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ | |
| board_ahci = 0, | |
| board_ahci_vt8251 = 1, | |
| /* global controller registers */ | |
| HOST_CAP = 0x00, /* host capabilities */ | |
| HOST_CTL = 0x04, /* global host control */ | |
| HOST_IRQ_STAT = 0x08, /* interrupt status */ | |
| HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ | |
| HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ | |
| /* HOST_CTL bits */ | |
| HOST_RESET = (1 << 0), /* reset controller; self-clear */ | |
| HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ | |
| HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ | |
| /* HOST_CAP bits */ | |
| HOST_CAP_SSC = (1 << 14), /* Slumber capable */ | |
| HOST_CAP_CLO = (1 << 24), /* Command List Override support */ | |
| HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ | |
| HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ | |
| HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ | |
| /* registers for each SATA port */ | |
| PORT_LST_ADDR = 0x00, /* command list DMA addr */ | |
| PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ | |
| PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */ | |
| PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */ | |
| PORT_IRQ_STAT = 0x10, /* interrupt status */ | |
| PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */ | |
| PORT_CMD = 0x18, /* port command */ | |
| PORT_TFDATA = 0x20, /* taskfile data */ | |
| PORT_SIG = 0x24, /* device TF signature */ | |
| PORT_CMD_ISSUE = 0x38, /* command issue */ | |
| PORT_SCR = 0x28, /* SATA phy register block */ | |
| PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ | |
| PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ | |
| PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ | |
| PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ | |
| /* PORT_IRQ_{STAT,MASK} bits */ | |
| PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ | |
| PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ | |
| PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ | |
| PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ | |
| PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ | |
| PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ | |
| PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ | |
| PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ | |
| PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ | |
| PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ | |
| PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ | |
| PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ | |
| PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ | |
| PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ | |
| PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ | |
| PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ | |
| PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ | |
| PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | | |
| PORT_IRQ_IF_ERR | | |
| PORT_IRQ_CONNECT | | |
| PORT_IRQ_PHYRDY | | |
| PORT_IRQ_UNK_FIS, | |
| PORT_IRQ_ERROR = PORT_IRQ_FREEZE | | |
| PORT_IRQ_TF_ERR | | |
| PORT_IRQ_HBUS_DATA_ERR, | |
| DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | | |
| PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | | |
| PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, | |
| /* PORT_CMD bits */ | |
| PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ | |
| PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ | |
| PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ | |
| PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ | |
| PORT_CMD_CLO = (1 << 3), /* Command list override */ | |
| PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ | |
| PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ | |
| PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ | |
| PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ | |
| PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ | |
| PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ | |
| PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ | |
| /* hpriv->flags bits */ | |
| AHCI_FLAG_MSI = (1 << 0), | |
| /* ap->flags bits */ | |
| AHCI_FLAG_RESET_NEEDS_CLO = (1 << 24), | |
| AHCI_FLAG_NO_NCQ = (1 << 25), | |
| }; | |
| struct ahci_cmd_hdr { | |
| u32 opts; | |
| u32 status; | |
| u32 tbl_addr; | |
| u32 tbl_addr_hi; | |
| u32 reserved[4]; | |
| }; | |
| struct ahci_sg { | |
| u32 addr; | |
| u32 addr_hi; | |
| u32 reserved; | |
| u32 flags_size; | |
| }; | |
| struct ahci_host_priv { | |
| unsigned long flags; | |
| u32 cap; /* cache of HOST_CAP register */ | |
| u32 port_map; /* cache of HOST_PORTS_IMPL reg */ | |
| }; | |
| struct ahci_port_priv { | |
| struct ahci_cmd_hdr *cmd_slot; | |
| dma_addr_t cmd_slot_dma; | |
| void *cmd_tbl; | |
| dma_addr_t cmd_tbl_dma; | |
| void *rx_fis; | |
| dma_addr_t rx_fis_dma; | |
| }; | |
| static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg); | |
| static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); | |
| static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); | |
| static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); | |
| static irqreturn_t ahci_interrupt (int irq, void *dev_instance); | |
| static void ahci_irq_clear(struct ata_port *ap); | |
| static int ahci_port_start(struct ata_port *ap); | |
| static void ahci_port_stop(struct ata_port *ap); | |
| static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf); | |
| static void ahci_qc_prep(struct ata_queued_cmd *qc); | |
| static u8 ahci_check_status(struct ata_port *ap); | |
| static void ahci_freeze(struct ata_port *ap); | |
| static void ahci_thaw(struct ata_port *ap); | |
| static void ahci_error_handler(struct ata_port *ap); | |
| static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); | |
| static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); | |
| static int ahci_port_resume(struct ata_port *ap); | |
| static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); | |
| static int ahci_pci_device_resume(struct pci_dev *pdev); | |
| static void ahci_remove_one (struct pci_dev *pdev); | |
| static struct scsi_host_template ahci_sht = { | |
| .module = THIS_MODULE, | |
| .name = DRV_NAME, | |
| .ioctl = ata_scsi_ioctl, | |
| .queuecommand = ata_scsi_queuecmd, | |
| .change_queue_depth = ata_scsi_change_queue_depth, | |
| .can_queue = AHCI_MAX_CMDS - 1, | |
| .this_id = ATA_SHT_THIS_ID, | |
| .sg_tablesize = AHCI_MAX_SG, | |
| .cmd_per_lun = ATA_SHT_CMD_PER_LUN, | |
| .emulated = ATA_SHT_EMULATED, | |
| .use_clustering = AHCI_USE_CLUSTERING, | |
| .proc_name = DRV_NAME, | |
| .dma_boundary = AHCI_DMA_BOUNDARY, | |
| .slave_configure = ata_scsi_slave_config, | |
| .slave_destroy = ata_scsi_slave_destroy, | |
| .bios_param = ata_std_bios_param, | |
| .suspend = ata_scsi_device_suspend, | |
| .resume = ata_scsi_device_resume, | |
| }; | |
| static const struct ata_port_operations ahci_ops = { | |
| .port_disable = ata_port_disable, | |
| .check_status = ahci_check_status, | |
| .check_altstatus = ahci_check_status, | |
| .dev_select = ata_noop_dev_select, | |
| .tf_read = ahci_tf_read, | |
| .qc_prep = ahci_qc_prep, | |
| .qc_issue = ahci_qc_issue, | |
| .irq_handler = ahci_interrupt, | |
| .irq_clear = ahci_irq_clear, | |
| .scr_read = ahci_scr_read, | |
| .scr_write = ahci_scr_write, | |
| .freeze = ahci_freeze, | |
| .thaw = ahci_thaw, | |
| .error_handler = ahci_error_handler, | |
| .post_internal_cmd = ahci_post_internal_cmd, | |
| .port_suspend = ahci_port_suspend, | |
| .port_resume = ahci_port_resume, | |
| .port_start = ahci_port_start, | |
| .port_stop = ahci_port_stop, | |
| }; | |
| static const struct ata_port_info ahci_port_info[] = { | |
| /* board_ahci */ | |
| { | |
| .sht = &ahci_sht, | |
| .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | | |
| ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | | |
| ATA_FLAG_SKIP_D2H_BSY, | |
| .pio_mask = 0x1f, /* pio0-4 */ | |
| .udma_mask = 0x7f, /* udma0-6 ; FIXME */ | |
| .port_ops = &ahci_ops, | |
| }, | |
| /* board_ahci_vt8251 */ | |
| { | |
| .sht = &ahci_sht, | |
| .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | | |
| ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | | |
| ATA_FLAG_SKIP_D2H_BSY | | |
| AHCI_FLAG_RESET_NEEDS_CLO | AHCI_FLAG_NO_NCQ, | |
| .pio_mask = 0x1f, /* pio0-4 */ | |
| .udma_mask = 0x7f, /* udma0-6 ; FIXME */ | |
| .port_ops = &ahci_ops, | |
| }, | |
| }; | |
| static const struct pci_device_id ahci_pci_tbl[] = { | |
| /* Intel */ | |
| { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */ | |
| { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */ | |
| { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */ | |
| { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */ | |
| { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */ | |
| { PCI_VDEVICE(AL, 0x5288), board_ahci }, /* ULi M5288 */ | |
| { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */ | |
| { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */ | |
| { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */ | |
| { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */ | |
| { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */ | |
| { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */ | |
| { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */ | |
| { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */ | |
| { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */ | |
| { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */ | |
| { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */ | |
| { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */ | |
| { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */ | |
| { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */ | |
| { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */ | |
| { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */ | |
| { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */ | |
| { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */ | |
| { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */ | |
| { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */ | |
| /* JMicron */ | |
| { PCI_VDEVICE(JMICRON, 0x2360), board_ahci }, /* JMicron JMB360 */ | |
| { PCI_VDEVICE(JMICRON, 0x2361), board_ahci }, /* JMicron JMB361 */ | |
| { PCI_VDEVICE(JMICRON, 0x2363), board_ahci }, /* JMicron JMB363 */ | |
| { PCI_VDEVICE(JMICRON, 0x2365), board_ahci }, /* JMicron JMB365 */ | |
| { PCI_VDEVICE(JMICRON, 0x2366), board_ahci }, /* JMicron JMB366 */ | |
| /* ATI */ | |
| { PCI_VDEVICE(ATI, 0x4380), board_ahci }, /* ATI SB600 non-raid */ | |
| { PCI_VDEVICE(ATI, 0x4381), board_ahci }, /* ATI SB600 raid */ | |
| /* VIA */ | |
| { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */ | |
| /* NVIDIA */ | |
| { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */ | |
| { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */ | |
| { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */ | |
| { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */ | |
| { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */ | |
| { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */ | |
| { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */ | |
| { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */ | |
| { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */ | |
| { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */ | |
| { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */ | |
| { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */ | |
| /* SiS */ | |
| { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ | |
| { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */ | |
| { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */ | |
| { } /* terminate list */ | |
| }; | |
| static struct pci_driver ahci_pci_driver = { | |
| .name = DRV_NAME, | |
| .id_table = ahci_pci_tbl, | |
| .probe = ahci_init_one, | |
| .suspend = ahci_pci_device_suspend, | |
| .resume = ahci_pci_device_resume, | |
| .remove = ahci_remove_one, | |
| }; | |
| static inline unsigned long ahci_port_base_ul (unsigned long base, unsigned int port) | |
| { | |
| return base + 0x100 + (port * 0x80); | |
| } | |
| static inline void __iomem *ahci_port_base (void __iomem *base, unsigned int port) | |
| { | |
| return (void __iomem *) ahci_port_base_ul((unsigned long)base, port); | |
| } | |
| static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in) | |
| { | |
| unsigned int sc_reg; | |
| switch (sc_reg_in) { | |
| case SCR_STATUS: sc_reg = 0; break; | |
| case SCR_CONTROL: sc_reg = 1; break; | |
| case SCR_ERROR: sc_reg = 2; break; | |
| case SCR_ACTIVE: sc_reg = 3; break; | |
| default: | |
| return 0xffffffffU; | |
| } | |
| return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); | |
| } | |
| static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in, | |
| u32 val) | |
| { | |
| unsigned int sc_reg; | |
| switch (sc_reg_in) { | |
| case SCR_STATUS: sc_reg = 0; break; | |
| case SCR_CONTROL: sc_reg = 1; break; | |
| case SCR_ERROR: sc_reg = 2; break; | |
| case SCR_ACTIVE: sc_reg = 3; break; | |
| default: | |
| return; | |
| } | |
| writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); | |
| } | |
| static void ahci_start_engine(void __iomem *port_mmio) | |
| { | |
| u32 tmp; | |
| /* start DMA */ | |
| tmp = readl(port_mmio + PORT_CMD); | |
| tmp |= PORT_CMD_START; | |
| writel(tmp, port_mmio + PORT_CMD); | |
| readl(port_mmio + PORT_CMD); /* flush */ | |
| } | |
| static int ahci_stop_engine(void __iomem *port_mmio) | |
| { | |
| u32 tmp; | |
| tmp = readl(port_mmio + PORT_CMD); | |
| /* check if the HBA is idle */ | |
| if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) | |
| return 0; | |
| /* setting HBA to idle */ | |
| tmp &= ~PORT_CMD_START; | |
| writel(tmp, port_mmio + PORT_CMD); | |
| /* wait for engine to stop. This could be as long as 500 msec */ | |
| tmp = ata_wait_register(port_mmio + PORT_CMD, | |
| PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); | |
| if (tmp & PORT_CMD_LIST_ON) | |
| return -EIO; | |
| return 0; | |
| } | |
| static void ahci_start_fis_rx(void __iomem *port_mmio, u32 cap, | |
| dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma) | |
| { | |
| u32 tmp; | |
| /* set FIS registers */ | |
| if (cap & HOST_CAP_64) | |
| writel((cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI); | |
| writel(cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); | |
| if (cap & HOST_CAP_64) | |
| writel((rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI); | |
| writel(rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); | |
| /* enable FIS reception */ | |
| tmp = readl(port_mmio + PORT_CMD); | |
| tmp |= PORT_CMD_FIS_RX; | |
| writel(tmp, port_mmio + PORT_CMD); | |
| /* flush */ | |
| readl(port_mmio + PORT_CMD); | |
| } | |
| static int ahci_stop_fis_rx(void __iomem *port_mmio) | |
| { | |
| u32 tmp; | |
| /* disable FIS reception */ | |
| tmp = readl(port_mmio + PORT_CMD); | |
| tmp &= ~PORT_CMD_FIS_RX; | |
| writel(tmp, port_mmio + PORT_CMD); | |
| /* wait for completion, spec says 500ms, give it 1000 */ | |
| tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, | |
| PORT_CMD_FIS_ON, 10, 1000); | |
| if (tmp & PORT_CMD_FIS_ON) | |
| return -EBUSY; | |
| return 0; | |
| } | |
| static void ahci_power_up(void __iomem *port_mmio, u32 cap) | |
| { | |
| u32 cmd; | |
| cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; | |
| /* spin up device */ | |
| if (cap & HOST_CAP_SSS) { | |
| cmd |= PORT_CMD_SPIN_UP; | |
| writel(cmd, port_mmio + PORT_CMD); | |
| } | |
| /* wake up link */ | |
| writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); | |
| } | |
| static void ahci_power_down(void __iomem *port_mmio, u32 cap) | |
| { | |
| u32 cmd, scontrol; | |
| cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; | |
| if (cap & HOST_CAP_SSC) { | |
| /* enable transitions to slumber mode */ | |
| scontrol = readl(port_mmio + PORT_SCR_CTL); | |
| if ((scontrol & 0x0f00) > 0x100) { | |
| scontrol &= ~0xf00; | |
| writel(scontrol, port_mmio + PORT_SCR_CTL); | |
| } | |
| /* put device into slumber mode */ | |
| writel(cmd | PORT_CMD_ICC_SLUMBER, port_mmio + PORT_CMD); | |
| /* wait for the transition to complete */ | |
| ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_ICC_SLUMBER, | |
| PORT_CMD_ICC_SLUMBER, 1, 50); | |
| } | |
| /* put device into listen mode */ | |
| if (cap & HOST_CAP_SSS) { | |
| /* first set PxSCTL.DET to 0 */ | |
| scontrol = readl(port_mmio + PORT_SCR_CTL); | |
| scontrol &= ~0xf; | |
| writel(scontrol, port_mmio + PORT_SCR_CTL); | |
| /* then set PxCMD.SUD to 0 */ | |
| cmd &= ~PORT_CMD_SPIN_UP; | |
| writel(cmd, port_mmio + PORT_CMD); | |
| } | |
| } | |
| static void ahci_init_port(void __iomem *port_mmio, u32 cap, | |
| dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma) | |
| { | |
| /* power up */ | |
| ahci_power_up(port_mmio, cap); | |
| /* enable FIS reception */ | |
| ahci_start_fis_rx(port_mmio, cap, cmd_slot_dma, rx_fis_dma); | |
| /* enable DMA */ | |
| ahci_start_engine(port_mmio); | |
| } | |
| static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg) | |
| { | |
| int rc; | |
| /* disable DMA */ | |
| rc = ahci_stop_engine(port_mmio); | |
| if (rc) { | |
| *emsg = "failed to stop engine"; | |
| return rc; | |
| } | |
| /* disable FIS reception */ | |
| rc = ahci_stop_fis_rx(port_mmio); | |
| if (rc) { | |
| *emsg = "failed stop FIS RX"; | |
| return rc; | |
| } | |
| /* put device into slumber mode */ | |
| ahci_power_down(port_mmio, cap); | |
| return 0; | |
| } | |
| static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev) | |
| { | |
| u32 cap_save, tmp; | |
| cap_save = readl(mmio + HOST_CAP); | |
| cap_save &= ( (1<<28) | (1<<17) ); | |
| cap_save |= (1 << 27); | |
| /* global controller reset */ | |
| tmp = readl(mmio + HOST_CTL); | |
| if ((tmp & HOST_RESET) == 0) { | |
| writel(tmp | HOST_RESET, mmio + HOST_CTL); | |
| readl(mmio + HOST_CTL); /* flush */ | |
| } | |
| /* reset must complete within 1 second, or | |
| * the hardware should be considered fried. | |
| */ | |
| ssleep(1); | |
| tmp = readl(mmio + HOST_CTL); | |
| if (tmp & HOST_RESET) { | |
| dev_printk(KERN_ERR, &pdev->dev, | |
| "controller reset failed (0x%x)\n", tmp); | |
| return -EIO; | |
| } | |
| writel(HOST_AHCI_EN, mmio + HOST_CTL); | |
| (void) readl(mmio + HOST_CTL); /* flush */ | |
| writel(cap_save, mmio + HOST_CAP); | |
| writel(0xf, mmio + HOST_PORTS_IMPL); | |
| (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ | |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL) { | |
| u16 tmp16; | |
| /* configure PCS */ | |
| pci_read_config_word(pdev, 0x92, &tmp16); | |
| tmp16 |= 0xf; | |
| pci_write_config_word(pdev, 0x92, tmp16); | |
| } | |
| return 0; | |
| } | |
| static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev, | |
| int n_ports, u32 cap) | |
| { | |
| int i, rc; | |
| u32 tmp; | |
| for (i = 0; i < n_ports; i++) { | |
| void __iomem *port_mmio = ahci_port_base(mmio, i); | |
| const char *emsg = NULL; | |
| #if 0 /* BIOSen initialize this incorrectly */ | |
| if (!(hpriv->port_map & (1 << i))) | |
| continue; | |
| #endif | |
| /* make sure port is not active */ | |
| rc = ahci_deinit_port(port_mmio, cap, &emsg); | |
| if (rc) | |
| dev_printk(KERN_WARNING, &pdev->dev, | |
| "%s (%d)\n", emsg, rc); | |
| /* clear SError */ | |
| tmp = readl(port_mmio + PORT_SCR_ERR); | |
| VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); | |
| writel(tmp, port_mmio + PORT_SCR_ERR); | |
| /* clear port IRQ */ | |
| tmp = readl(port_mmio + PORT_IRQ_STAT); | |
| VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); | |
| if (tmp) | |
| writel(tmp, port_mmio + PORT_IRQ_STAT); | |
| writel(1 << i, mmio + HOST_IRQ_STAT); | |
| } | |
| tmp = readl(mmio + HOST_CTL); | |
| VPRINTK("HOST_CTL 0x%x\n", tmp); | |
| writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); | |
| tmp = readl(mmio + HOST_CTL); | |
| VPRINTK("HOST_CTL 0x%x\n", tmp); | |
| } | |
| static unsigned int ahci_dev_classify(struct ata_port *ap) | |
| { | |
| void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; | |
| struct ata_taskfile tf; | |
| u32 tmp; | |
| tmp = readl(port_mmio + PORT_SIG); | |
| tf.lbah = (tmp >> 24) & 0xff; | |
| tf.lbam = (tmp >> 16) & 0xff; | |
| tf.lbal = (tmp >> 8) & 0xff; | |
| tf.nsect = (tmp) & 0xff; | |
| return ata_dev_classify(&tf); | |
| } | |
| static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, | |
| u32 opts) | |
| { | |
| dma_addr_t cmd_tbl_dma; | |
| cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; | |
| pp->cmd_slot[tag].opts = cpu_to_le32(opts); | |
| pp->cmd_slot[tag].status = 0; | |
| pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); | |
| pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); | |
| } | |
| static int ahci_clo(struct ata_port *ap) | |
| { | |
| void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; | |
| struct ahci_host_priv *hpriv = ap->host->private_data; | |
| u32 tmp; | |
| if (!(hpriv->cap & HOST_CAP_CLO)) | |
| return -EOPNOTSUPP; | |
| tmp = readl(port_mmio + PORT_CMD); | |
| tmp |= PORT_CMD_CLO; | |
| writel(tmp, port_mmio + PORT_CMD); | |
| tmp = ata_wait_register(port_mmio + PORT_CMD, | |
| PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); | |
| if (tmp & PORT_CMD_CLO) | |
| return -EIO; | |
| return 0; | |
| } | |
| static int ahci_prereset(struct ata_port *ap) | |
| { | |
| if ((ap->flags & AHCI_FLAG_RESET_NEEDS_CLO) && | |
| (ata_busy_wait(ap, ATA_BUSY, 1000) & ATA_BUSY)) { | |
| /* ATA_BUSY hasn't cleared, so send a CLO */ | |
| ahci_clo(ap); | |
| } | |
| return ata_std_prereset(ap); | |
| } | |
| static int ahci_softreset(struct ata_port *ap, unsigned int *class) | |
| { | |
| struct ahci_port_priv *pp = ap->private_data; | |
| void __iomem *mmio = ap->host->mmio_base; | |
| void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | |
| const u32 cmd_fis_len = 5; /* five dwords */ | |
| const char *reason = NULL; | |
| struct ata_taskfile tf; | |
| u32 tmp; | |
| u8 *fis; | |
| int rc; | |
| DPRINTK("ENTER\n"); | |
| if (ata_port_offline(ap)) { | |
| DPRINTK("PHY reports no device\n"); | |
| *class = ATA_DEV_NONE; | |
| return 0; | |
| } | |
| /* prepare for SRST (AHCI-1.1 10.4.1) */ | |
| rc = ahci_stop_engine(port_mmio); | |
| if (rc) { | |
| reason = "failed to stop engine"; | |
| goto fail_restart; | |
| } | |
| /* check BUSY/DRQ, perform Command List Override if necessary */ | |
| if (ahci_check_status(ap) & (ATA_BUSY | ATA_DRQ)) { | |
| rc = ahci_clo(ap); | |
| if (rc == -EOPNOTSUPP) { | |
| reason = "port busy but CLO unavailable"; | |
| goto fail_restart; | |
| } else if (rc) { | |
| reason = "port busy but CLO failed"; | |
| goto fail_restart; | |
| } | |
| } | |
| /* restart engine */ | |
| ahci_start_engine(port_mmio); | |
| ata_tf_init(ap->device, &tf); | |
| fis = pp->cmd_tbl; | |
| /* issue the first D2H Register FIS */ | |
| ahci_fill_cmd_slot(pp, 0, | |
| cmd_fis_len | AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY); | |
| tf.ctl |= ATA_SRST; | |
| ata_tf_to_fis(&tf, fis, 0); | |
| fis[1] &= ~(1 << 7); /* turn off Command FIS bit */ | |
| writel(1, port_mmio + PORT_CMD_ISSUE); | |
| tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, 1, 500); | |
| if (tmp & 0x1) { | |
| rc = -EIO; | |
| reason = "1st FIS failed"; | |
| goto fail; | |
| } | |
| /* spec says at least 5us, but be generous and sleep for 1ms */ | |
| msleep(1); | |
| /* issue the second D2H Register FIS */ | |
| ahci_fill_cmd_slot(pp, 0, cmd_fis_len); | |
| tf.ctl &= ~ATA_SRST; | |
| ata_tf_to_fis(&tf, fis, 0); | |
| fis[1] &= ~(1 << 7); /* turn off Command FIS bit */ | |
| writel(1, port_mmio + PORT_CMD_ISSUE); | |
| readl(port_mmio + PORT_CMD_ISSUE); /* flush */ | |
| /* spec mandates ">= 2ms" before checking status. | |
| * We wait 150ms, because that was the magic delay used for | |
| * ATAPI devices in Hale Landis's ATADRVR, for the period of time | |
| * between when the ATA command register is written, and then | |
| * status is checked. Because waiting for "a while" before | |
| * checking status is fine, post SRST, we perform this magic | |
| * delay here as well. | |
| */ | |
| msleep(150); | |
| *class = ATA_DEV_NONE; | |
| if (ata_port_online(ap)) { | |
| if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { | |
| rc = -EIO; | |
| reason = "device not ready"; | |
| goto fail; | |
| } | |
| *class = ahci_dev_classify(ap); | |
| } | |
| DPRINTK("EXIT, class=%u\n", *class); | |
| return 0; | |
| fail_restart: | |
| ahci_start_engine(port_mmio); | |
| fail: | |
| ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason); | |
| return rc; | |
| } | |
| static int ahci_hardreset(struct ata_port *ap, unsigned int *class) | |
| { | |
| struct ahci_port_priv *pp = ap->private_data; | |
| u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; | |
| struct ata_taskfile tf; | |
| void __iomem *mmio = ap->host->mmio_base; | |
| void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | |
| int rc; | |
| DPRINTK("ENTER\n"); | |
| ahci_stop_engine(port_mmio); | |
| /* clear D2H reception area to properly wait for D2H FIS */ | |
| ata_tf_init(ap->device, &tf); | |
| tf.command = 0xff; | |
| ata_tf_to_fis(&tf, d2h_fis, 0); | |
| rc = sata_std_hardreset(ap, class); | |
| ahci_start_engine(port_mmio); | |
| if (rc == 0 && ata_port_online(ap)) | |
| *class = ahci_dev_classify(ap); | |
| if (*class == ATA_DEV_UNKNOWN) | |
| *class = ATA_DEV_NONE; | |
| DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); | |
| return rc; | |
| } | |
| static void ahci_postreset(struct ata_port *ap, unsigned int *class) | |
| { | |
| void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; | |
| u32 new_tmp, tmp; | |
| ata_std_postreset(ap, class); | |
| /* Make sure port's ATAPI bit is set appropriately */ | |
| new_tmp = tmp = readl(port_mmio + PORT_CMD); | |
| if (*class == ATA_DEV_ATAPI) | |
| new_tmp |= PORT_CMD_ATAPI; | |
| else | |
| new_tmp &= ~PORT_CMD_ATAPI; | |
| if (new_tmp != tmp) { | |
| writel(new_tmp, port_mmio + PORT_CMD); | |
| readl(port_mmio + PORT_CMD); /* flush */ | |
| } | |
| } | |
| static u8 ahci_check_status(struct ata_port *ap) | |
| { | |
| void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr; | |
| return readl(mmio + PORT_TFDATA) & 0xFF; | |
| } | |
| static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) | |
| { | |
| struct ahci_port_priv *pp = ap->private_data; | |
| u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; | |
| ata_tf_from_fis(d2h_fis, tf); | |
| } | |
| static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) | |
| { | |
| struct scatterlist *sg; | |
| struct ahci_sg *ahci_sg; | |
| unsigned int n_sg = 0; | |
| VPRINTK("ENTER\n"); | |
| /* | |
| * Next, the S/G list. | |
| */ | |
| ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; | |
| ata_for_each_sg(sg, qc) { | |
| dma_addr_t addr = sg_dma_address(sg); | |
| u32 sg_len = sg_dma_len(sg); | |
| ahci_sg->addr = cpu_to_le32(addr & 0xffffffff); | |
| ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); | |
| ahci_sg->flags_size = cpu_to_le32(sg_len - 1); | |
| ahci_sg++; | |
| n_sg++; | |
| } | |
| return n_sg; | |
| } | |
| static void ahci_qc_prep(struct ata_queued_cmd *qc) | |
| { | |
| struct ata_port *ap = qc->ap; | |
| struct ahci_port_priv *pp = ap->private_data; | |
| int is_atapi = is_atapi_taskfile(&qc->tf); | |
| void *cmd_tbl; | |
| u32 opts; | |
| const u32 cmd_fis_len = 5; /* five dwords */ | |
| unsigned int n_elem; | |
| /* | |
| * Fill in command table information. First, the header, | |
| * a SATA Register - Host to Device command FIS. | |
| */ | |
| cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; | |
| ata_tf_to_fis(&qc->tf, cmd_tbl, 0); | |
| if (is_atapi) { | |
| memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); | |
| memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); | |
| } | |
| n_elem = 0; | |
| if (qc->flags & ATA_QCFLAG_DMAMAP) | |
| n_elem = ahci_fill_sg(qc, cmd_tbl); | |
| /* | |
| * Fill in command slot information. | |
| */ | |
| opts = cmd_fis_len | n_elem << 16; | |
| if (qc->tf.flags & ATA_TFLAG_WRITE) | |
| opts |= AHCI_CMD_WRITE; | |
| if (is_atapi) | |
| opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; | |
| ahci_fill_cmd_slot(pp, qc->tag, opts); | |
| } | |
| static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) | |
| { | |
| struct ahci_port_priv *pp = ap->private_data; | |
| struct ata_eh_info *ehi = &ap->eh_info; | |
| unsigned int err_mask = 0, action = 0; | |
| struct ata_queued_cmd *qc; | |
| u32 serror; | |
| ata_ehi_clear_desc(ehi); | |
| /* AHCI needs SError cleared; otherwise, it might lock up */ | |
| serror = ahci_scr_read(ap, SCR_ERROR); | |
| ahci_scr_write(ap, SCR_ERROR, serror); | |
| /* analyze @irq_stat */ | |
| ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat); | |
| if (irq_stat & PORT_IRQ_TF_ERR) | |
| err_mask |= AC_ERR_DEV; | |
| if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { | |
| err_mask |= AC_ERR_HOST_BUS; | |
| action |= ATA_EH_SOFTRESET; | |
| } | |
| if (irq_stat & PORT_IRQ_IF_ERR) { | |
| err_mask |= AC_ERR_ATA_BUS; | |
| action |= ATA_EH_SOFTRESET; | |
| ata_ehi_push_desc(ehi, ", interface fatal error"); | |
| } | |
| if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { | |
| ata_ehi_hotplugged(ehi); | |
| ata_ehi_push_desc(ehi, ", %s", irq_stat & PORT_IRQ_CONNECT ? | |
| "connection status changed" : "PHY RDY changed"); | |
| } | |
| if (irq_stat & PORT_IRQ_UNK_FIS) { | |
| u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); | |
| err_mask |= AC_ERR_HSM; | |
| action |= ATA_EH_SOFTRESET; | |
| ata_ehi_push_desc(ehi, ", unknown FIS %08x %08x %08x %08x", | |
| unk[0], unk[1], unk[2], unk[3]); | |
| } | |
| /* okay, let's hand over to EH */ | |
| ehi->serror |= serror; | |
| ehi->action |= action; | |
| qc = ata_qc_from_tag(ap, ap->active_tag); | |
| if (qc) | |
| qc->err_mask |= err_mask; | |
| else | |
| ehi->err_mask |= err_mask; | |
| if (irq_stat & PORT_IRQ_FREEZE) | |
| ata_port_freeze(ap); | |
| else | |
| ata_port_abort(ap); | |
| } | |
| static void ahci_host_intr(struct ata_port *ap) | |
| { | |
| void __iomem *mmio = ap->host->mmio_base; | |
| void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | |
| struct ata_eh_info *ehi = &ap->eh_info; | |
| u32 status, qc_active; | |
| int rc; | |
| status = readl(port_mmio + PORT_IRQ_STAT); | |
| writel(status, port_mmio + PORT_IRQ_STAT); | |
| if (unlikely(status & PORT_IRQ_ERROR)) { | |
| ahci_error_intr(ap, status); | |
| return; | |
| } | |
| if (ap->sactive) | |
| qc_active = readl(port_mmio + PORT_SCR_ACT); | |
| else | |
| qc_active = readl(port_mmio + PORT_CMD_ISSUE); | |
| rc = ata_qc_complete_multiple(ap, qc_active, NULL); | |
| if (rc > 0) | |
| return; | |
| if (rc < 0) { | |
| ehi->err_mask |= AC_ERR_HSM; | |
| ehi->action |= ATA_EH_SOFTRESET; | |
| ata_port_freeze(ap); | |
| return; | |
| } | |
| /* hmmm... a spurious interupt */ | |
| /* some devices send D2H reg with I bit set during NCQ command phase */ | |
| if (ap->sactive && (status & PORT_IRQ_D2H_REG_FIS)) | |
| return; | |
| /* ignore interim PIO setup fis interrupts */ | |
| if (ata_tag_valid(ap->active_tag) && (status & PORT_IRQ_PIOS_FIS)) | |
| return; | |
| if (ata_ratelimit()) | |
| ata_port_printk(ap, KERN_INFO, "spurious interrupt " | |
| "(irq_stat 0x%x active_tag %d sactive 0x%x)\n", | |
| status, ap->active_tag, ap->sactive); | |
| } | |
| static void ahci_irq_clear(struct ata_port *ap) | |
| { | |
| /* TODO */ | |
| } | |
| static irqreturn_t ahci_interrupt(int irq, void *dev_instance) | |
| { | |
| struct ata_host *host = dev_instance; | |
| struct ahci_host_priv *hpriv; | |
| unsigned int i, handled = 0; | |
| void __iomem *mmio; | |
| u32 irq_stat, irq_ack = 0; | |
| VPRINTK("ENTER\n"); | |
| hpriv = host->private_data; | |
| mmio = host->mmio_base; | |
| /* sigh. 0xffffffff is a valid return from h/w */ | |
| irq_stat = readl(mmio + HOST_IRQ_STAT); | |
| irq_stat &= hpriv->port_map; | |
| if (!irq_stat) | |
| return IRQ_NONE; | |
| spin_lock(&host->lock); | |
| for (i = 0; i < host->n_ports; i++) { | |
| struct ata_port *ap; | |
| if (!(irq_stat & (1 << i))) | |
| continue; | |
| ap = host->ports[i]; | |
| if (ap) { | |
| ahci_host_intr(ap); | |
| VPRINTK("port %u\n", i); | |
| } else { | |
| VPRINTK("port %u (no irq)\n", i); | |
| if (ata_ratelimit()) | |
| dev_printk(KERN_WARNING, host->dev, | |
| "interrupt on disabled port %u\n", i); | |
| } | |
| irq_ack |= (1 << i); | |
| } | |
| if (irq_ack) { | |
| writel(irq_ack, mmio + HOST_IRQ_STAT); | |
| handled = 1; | |
| } | |
| spin_unlock(&host->lock); | |
| VPRINTK("EXIT\n"); | |
| return IRQ_RETVAL(handled); | |
| } | |
| static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) | |
| { | |
| struct ata_port *ap = qc->ap; | |
| void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr; | |
| if (qc->tf.protocol == ATA_PROT_NCQ) | |
| writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); | |
| writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); | |
| readl(port_mmio + PORT_CMD_ISSUE); /* flush */ | |
| return 0; | |
| } | |
| static void ahci_freeze(struct ata_port *ap) | |
| { | |
| void __iomem *mmio = ap->host->mmio_base; | |
| void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | |
| /* turn IRQ off */ | |
| writel(0, port_mmio + PORT_IRQ_MASK); | |
| } | |
| static void ahci_thaw(struct ata_port *ap) | |
| { | |
| void __iomem *mmio = ap->host->mmio_base; | |
| void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | |
| u32 tmp; | |
| /* clear IRQ */ | |
| tmp = readl(port_mmio + PORT_IRQ_STAT); | |
| writel(tmp, port_mmio + PORT_IRQ_STAT); | |
| writel(1 << ap->id, mmio + HOST_IRQ_STAT); | |
| /* turn IRQ back on */ | |
| writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); | |
| } | |
| static void ahci_error_handler(struct ata_port *ap) | |
| { | |
| void __iomem *mmio = ap->host->mmio_base; | |
| void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | |
| if (!(ap->pflags & ATA_PFLAG_FROZEN)) { | |
| /* restart engine */ | |
| ahci_stop_engine(port_mmio); | |
| ahci_start_engine(port_mmio); | |
| } | |
| /* perform recovery */ | |
| ata_do_eh(ap, ahci_prereset, ahci_softreset, ahci_hardreset, | |
| ahci_postreset); | |
| } | |
| static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) | |
| { | |
| struct ata_port *ap = qc->ap; | |
| void __iomem *mmio = ap->host->mmio_base; | |
| void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | |
| if (qc->flags & ATA_QCFLAG_FAILED) | |
| qc->err_mask |= AC_ERR_OTHER; | |
| if (qc->err_mask) { | |
| /* make DMA engine forget about the failed command */ | |
| ahci_stop_engine(port_mmio); | |
| ahci_start_engine(port_mmio); | |
| } | |
| } | |
| static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) | |
| { | |
| struct ahci_host_priv *hpriv = ap->host->private_data; | |
| struct ahci_port_priv *pp = ap->private_data; | |
| void __iomem *mmio = ap->host->mmio_base; | |
| void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | |
| const char *emsg = NULL; | |
| int rc; | |
| rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); | |
| if (rc) { | |
| ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc); | |
| ahci_init_port(port_mmio, hpriv->cap, | |
| pp->cmd_slot_dma, pp->rx_fis_dma); | |
| } | |
| return rc; | |
| } | |
| static int ahci_port_resume(struct ata_port *ap) | |
| { | |
| struct ahci_port_priv *pp = ap->private_data; | |
| struct ahci_host_priv *hpriv = ap->host->private_data; | |
| void __iomem *mmio = ap->host->mmio_base; | |
| void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | |
| ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma); | |
| return 0; | |
| } | |
| static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) | |
| { | |
| struct ata_host *host = dev_get_drvdata(&pdev->dev); | |
| void __iomem *mmio = host->mmio_base; | |
| u32 ctl; | |
| if (mesg.event == PM_EVENT_SUSPEND) { | |
| /* AHCI spec rev1.1 section 8.3.3: | |
| * Software must disable interrupts prior to requesting a | |
| * transition of the HBA to D3 state. | |
| */ | |
| ctl = readl(mmio + HOST_CTL); | |
| ctl &= ~HOST_IRQ_EN; | |
| writel(ctl, mmio + HOST_CTL); | |
| readl(mmio + HOST_CTL); /* flush */ | |
| } | |
| return ata_pci_device_suspend(pdev, mesg); | |
| } | |
| static int ahci_pci_device_resume(struct pci_dev *pdev) | |
| { | |
| struct ata_host *host = dev_get_drvdata(&pdev->dev); | |
| struct ahci_host_priv *hpriv = host->private_data; | |
| void __iomem *mmio = host->mmio_base; | |
| int rc; | |
| ata_pci_device_do_resume(pdev); | |
| if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { | |
| rc = ahci_reset_controller(mmio, pdev); | |
| if (rc) | |
| return rc; | |
| ahci_init_controller(mmio, pdev, host->n_ports, hpriv->cap); | |
| } | |
| ata_host_resume(host); | |
| return 0; | |
| } | |
| static int ahci_port_start(struct ata_port *ap) | |
| { | |
| struct device *dev = ap->host->dev; | |
| struct ahci_host_priv *hpriv = ap->host->private_data; | |
| struct ahci_port_priv *pp; | |
| void __iomem *mmio = ap->host->mmio_base; | |
| void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | |
| void *mem; | |
| dma_addr_t mem_dma; | |
| int rc; | |
| pp = kmalloc(sizeof(*pp), GFP_KERNEL); | |
| if (!pp) | |
| return -ENOMEM; | |
| memset(pp, 0, sizeof(*pp)); | |
| rc = ata_pad_alloc(ap, dev); | |
| if (rc) { | |
| kfree(pp); | |
| return rc; | |
| } | |
| mem = dma_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); | |
| if (!mem) { | |
| ata_pad_free(ap, dev); | |
| kfree(pp); | |
| return -ENOMEM; | |
| } | |
| memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); | |
| /* | |
| * First item in chunk of DMA memory: 32-slot command table, | |
| * 32 bytes each in size | |
| */ | |
| pp->cmd_slot = mem; | |
| pp->cmd_slot_dma = mem_dma; | |
| mem += AHCI_CMD_SLOT_SZ; | |
| mem_dma += AHCI_CMD_SLOT_SZ; | |
| /* | |
| * Second item: Received-FIS area | |
| */ | |
| pp->rx_fis = mem; | |
| pp->rx_fis_dma = mem_dma; | |
| mem += AHCI_RX_FIS_SZ; | |
| mem_dma += AHCI_RX_FIS_SZ; | |
| /* | |
| * Third item: data area for storing a single command | |
| * and its scatter-gather table | |
| */ | |
| pp->cmd_tbl = mem; | |
| pp->cmd_tbl_dma = mem_dma; | |
| ap->private_data = pp; | |
| /* initialize port */ | |
| ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma); | |
| return 0; | |
| } | |
| static void ahci_port_stop(struct ata_port *ap) | |
| { | |
| struct device *dev = ap->host->dev; | |
| struct ahci_host_priv *hpriv = ap->host->private_data; | |
| struct ahci_port_priv *pp = ap->private_data; | |
| void __iomem *mmio = ap->host->mmio_base; | |
| void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); | |
| const char *emsg = NULL; | |
| int rc; | |
| /* de-initialize port */ | |
| rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg); | |
| if (rc) | |
| ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc); | |
| ap->private_data = NULL; | |
| dma_free_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, | |
| pp->cmd_slot, pp->cmd_slot_dma); | |
| ata_pad_free(ap, dev); | |
| kfree(pp); | |
| } | |
| static void ahci_setup_port(struct ata_ioports *port, unsigned long base, | |
| unsigned int port_idx) | |
| { | |
| VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx); | |
| base = ahci_port_base_ul(base, port_idx); | |
| VPRINTK("base now==0x%lx\n", base); | |
| port->cmd_addr = base; | |
| port->scr_addr = base + PORT_SCR; | |
| VPRINTK("EXIT\n"); | |
| } | |
| static int ahci_host_init(struct ata_probe_ent *probe_ent) | |
| { | |
| struct ahci_host_priv *hpriv = probe_ent->private_data; | |
| struct pci_dev *pdev = to_pci_dev(probe_ent->dev); | |
| void __iomem *mmio = probe_ent->mmio_base; | |
| unsigned int i, using_dac; | |
| int rc; | |
| rc = ahci_reset_controller(mmio, pdev); | |
| if (rc) | |
| return rc; | |
| hpriv->cap = readl(mmio + HOST_CAP); | |
| hpriv->port_map = readl(mmio + HOST_PORTS_IMPL); | |
| probe_ent->n_ports = (hpriv->cap & 0x1f) + 1; | |
| VPRINTK("cap 0x%x port_map 0x%x n_ports %d\n", | |
| hpriv->cap, hpriv->port_map, probe_ent->n_ports); | |
| using_dac = hpriv->cap & HOST_CAP_64; | |
| if (using_dac && | |
| !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { | |
| rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); | |
| if (rc) { | |
| rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); | |
| if (rc) { | |
| dev_printk(KERN_ERR, &pdev->dev, | |
| "64-bit DMA enable failed\n"); | |
| return rc; | |
| } | |
| } | |
| } else { | |
| rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); | |
| if (rc) { | |
| dev_printk(KERN_ERR, &pdev->dev, | |
| "32-bit DMA enable failed\n"); | |
| return rc; | |
| } | |
| rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); | |
| if (rc) { | |
| dev_printk(KERN_ERR, &pdev->dev, | |
| "32-bit consistent DMA enable failed\n"); | |
| return rc; | |
| } | |
| } | |
| for (i = 0; i < probe_ent->n_ports; i++) | |
| ahci_setup_port(&probe_ent->port[i], (unsigned long) mmio, i); | |
| ahci_init_controller(mmio, pdev, probe_ent->n_ports, hpriv->cap); | |
| pci_set_master(pdev); | |
| return 0; | |
| } | |
| static void ahci_print_info(struct ata_probe_ent *probe_ent) | |
| { | |
| struct ahci_host_priv *hpriv = probe_ent->private_data; | |
| struct pci_dev *pdev = to_pci_dev(probe_ent->dev); | |
| void __iomem *mmio = probe_ent->mmio_base; | |
| u32 vers, cap, impl, speed; | |
| const char *speed_s; | |
| u16 cc; | |
| const char *scc_s; | |
| vers = readl(mmio + HOST_VERSION); | |
| cap = hpriv->cap; | |
| impl = hpriv->port_map; | |
| speed = (cap >> 20) & 0xf; | |
| if (speed == 1) | |
| speed_s = "1.5"; | |
| else if (speed == 2) | |
| speed_s = "3"; | |
| else | |
| speed_s = "?"; | |
| pci_read_config_word(pdev, 0x0a, &cc); | |
| if (cc == 0x0101) | |
| scc_s = "IDE"; | |
| else if (cc == 0x0106) | |
| scc_s = "SATA"; | |
| else if (cc == 0x0104) | |
| scc_s = "RAID"; | |
| else | |
| scc_s = "unknown"; | |
| dev_printk(KERN_INFO, &pdev->dev, | |
| "AHCI %02x%02x.%02x%02x " | |
| "%u slots %u ports %s Gbps 0x%x impl %s mode\n" | |
| , | |
| (vers >> 24) & 0xff, | |
| (vers >> 16) & 0xff, | |
| (vers >> 8) & 0xff, | |
| vers & 0xff, | |
| ((cap >> 8) & 0x1f) + 1, | |
| (cap & 0x1f) + 1, | |
| speed_s, | |
| impl, | |
| scc_s); | |
| dev_printk(KERN_INFO, &pdev->dev, | |
| "flags: " | |
| "%s%s%s%s%s%s" | |
| "%s%s%s%s%s%s%s\n" | |
| , | |
| cap & (1 << 31) ? "64bit " : "", | |
| cap & (1 << 30) ? "ncq " : "", | |
| cap & (1 << 28) ? "ilck " : "", | |
| cap & (1 << 27) ? "stag " : "", | |
| cap & (1 << 26) ? "pm " : "", | |
| cap & (1 << 25) ? "led " : "", | |
| cap & (1 << 24) ? "clo " : "", | |
| cap & (1 << 19) ? "nz " : "", | |
| cap & (1 << 18) ? "only " : "", | |
| cap & (1 << 17) ? "pmp " : "", | |
| cap & (1 << 15) ? "pio " : "", | |
| cap & (1 << 14) ? "slum " : "", | |
| cap & (1 << 13) ? "part " : "" | |
| ); | |
| } | |
| static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) | |
| { | |
| static int printed_version; | |
| struct ata_probe_ent *probe_ent = NULL; | |
| struct ahci_host_priv *hpriv; | |
| unsigned long base; | |
| void __iomem *mmio_base; | |
| unsigned int board_idx = (unsigned int) ent->driver_data; | |
| int have_msi, pci_dev_busy = 0; | |
| int rc; | |
| VPRINTK("ENTER\n"); | |
| WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS); | |
| if (!printed_version++) | |
| dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); | |
| /* JMicron-specific fixup: make sure we're in AHCI mode */ | |
| /* This is protected from races with ata_jmicron by the pci probe | |
| locking */ | |
| if (pdev->vendor == PCI_VENDOR_ID_JMICRON) { | |
| /* AHCI enable, AHCI on function 0 */ | |
| pci_write_config_byte(pdev, 0x41, 0xa1); | |
| /* Function 1 is the PATA controller */ | |
| if (PCI_FUNC(pdev->devfn)) | |
| return -ENODEV; | |
| } | |
| rc = pci_enable_device(pdev); | |
| if (rc) | |
| return rc; | |
| rc = pci_request_regions(pdev, DRV_NAME); | |
| if (rc) { | |
| pci_dev_busy = 1; | |
| goto err_out; | |
| } | |
| if (pci_enable_msi(pdev) == 0) | |
| have_msi = 1; | |
| else { | |
| pci_intx(pdev, 1); | |
| have_msi = 0; | |
| } | |
| probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); | |
| if (probe_ent == NULL) { | |
| rc = -ENOMEM; | |
| goto err_out_msi; | |
| } | |
| memset(probe_ent, 0, sizeof(*probe_ent)); | |
| probe_ent->dev = pci_dev_to_dev(pdev); | |
| INIT_LIST_HEAD(&probe_ent->node); | |
| mmio_base = pci_iomap(pdev, AHCI_PCI_BAR, 0); | |
| if (mmio_base == NULL) { | |
| rc = -ENOMEM; | |
| goto err_out_free_ent; | |
| } | |
| base = (unsigned long) mmio_base; | |
| hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); | |
| if (!hpriv) { | |
| rc = -ENOMEM; | |
| goto err_out_iounmap; | |
| } | |
| memset(hpriv, 0, sizeof(*hpriv)); | |
| probe_ent->sht = ahci_port_info[board_idx].sht; | |
| probe_ent->port_flags = ahci_port_info[board_idx].flags; | |
| probe_ent->pio_mask = ahci_port_info[board_idx].pio_mask; | |
| probe_ent->udma_mask = ahci_port_info[board_idx].udma_mask; | |
| probe_ent->port_ops = ahci_port_info[board_idx].port_ops; | |
| probe_ent->irq = pdev->irq; | |
| probe_ent->irq_flags = IRQF_SHARED; | |
| probe_ent->mmio_base = mmio_base; | |
| probe_ent->private_data = hpriv; | |
| if (have_msi) | |
| hpriv->flags |= AHCI_FLAG_MSI; | |
| /* initialize adapter */ | |
| rc = ahci_host_init(probe_ent); | |
| if (rc) | |
| goto err_out_hpriv; | |
| if (!(probe_ent->port_flags & AHCI_FLAG_NO_NCQ) && | |
| (hpriv->cap & HOST_CAP_NCQ)) | |
| probe_ent->port_flags |= ATA_FLAG_NCQ; | |
| ahci_print_info(probe_ent); | |
| /* FIXME: check ata_device_add return value */ | |
| ata_device_add(probe_ent); | |
| kfree(probe_ent); | |
| return 0; | |
| err_out_hpriv: | |
| kfree(hpriv); | |
| err_out_iounmap: | |
| pci_iounmap(pdev, mmio_base); | |
| err_out_free_ent: | |
| kfree(probe_ent); | |
| err_out_msi: | |
| if (have_msi) | |
| pci_disable_msi(pdev); | |
| else | |
| pci_intx(pdev, 0); | |
| pci_release_regions(pdev); | |
| err_out: | |
| if (!pci_dev_busy) | |
| pci_disable_device(pdev); | |
| return rc; | |
| } | |
| static void ahci_remove_one (struct pci_dev *pdev) | |
| { | |
| struct device *dev = pci_dev_to_dev(pdev); | |
| struct ata_host *host = dev_get_drvdata(dev); | |
| struct ahci_host_priv *hpriv = host->private_data; | |
| unsigned int i; | |
| int have_msi; | |
| for (i = 0; i < host->n_ports; i++) | |
| ata_port_detach(host->ports[i]); | |
| have_msi = hpriv->flags & AHCI_FLAG_MSI; | |
| free_irq(host->irq, host); | |
| for (i = 0; i < host->n_ports; i++) { | |
| struct ata_port *ap = host->ports[i]; | |
| ata_scsi_release(ap->scsi_host); | |
| scsi_host_put(ap->scsi_host); | |
| } | |
| kfree(hpriv); | |
| pci_iounmap(pdev, host->mmio_base); | |
| kfree(host); | |
| if (have_msi) | |
| pci_disable_msi(pdev); | |
| else | |
| pci_intx(pdev, 0); | |
| pci_release_regions(pdev); | |
| pci_disable_device(pdev); | |
| dev_set_drvdata(dev, NULL); | |
| } | |
| static int __init ahci_init(void) | |
| { | |
| return pci_register_driver(&ahci_pci_driver); | |
| } | |
| static void __exit ahci_exit(void) | |
| { | |
| pci_unregister_driver(&ahci_pci_driver); | |
| } | |
| MODULE_AUTHOR("Jeff Garzik"); | |
| MODULE_DESCRIPTION("AHCI SATA low-level driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); | |
| MODULE_VERSION(DRV_VERSION); | |
| module_init(ahci_init); | |
| module_exit(ahci_exit); |