| /* | |
| * pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer | |
| * (C) 2006 Red Hat Inc | |
| * Alan Cox <alan@redhat.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; see the file COPYING. If not, write to | |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/init.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/delay.h> | |
| #include <scsi/scsi_host.h> | |
| #include <linux/libata.h> | |
| #define DRV_NAME "pata_ns87410" | |
| #define DRV_VERSION "0.4.2" | |
| /** | |
| * ns87410_pre_reset - probe begin | |
| * @ap: ATA port | |
| * | |
| * Set up cable type and use generic probe init | |
| */ | |
| static int ns87410_pre_reset(struct ata_port *ap) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
| static const struct pci_bits ns87410_enable_bits[] = { | |
| { 0x43, 1, 0x08, 0x08 }, | |
| { 0x47, 1, 0x08, 0x08 } | |
| }; | |
| if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) | |
| return -ENOENT; | |
| ap->cbl = ATA_CBL_PATA40; | |
| return ata_std_prereset(ap); | |
| } | |
| /** | |
| * ns87410_error_handler - probe reset | |
| * @ap: ATA port | |
| * | |
| * Perform the ATA probe and bus reset sequence plus specific handling | |
| * for this hardware. The MPIIX has the enable bits in a different place | |
| * to PIIX4 and friends. As a pure PIO device it has no cable detect | |
| */ | |
| static void ns87410_error_handler(struct ata_port *ap) | |
| { | |
| ata_bmdma_drive_eh(ap, ns87410_pre_reset, ata_std_softreset, NULL, ata_std_postreset); | |
| } | |
| /** | |
| * ns87410_set_piomode - set initial PIO mode data | |
| * @ap: ATA interface | |
| * @adev: ATA device | |
| * | |
| * Program timing data. This is kept per channel not per device, | |
| * and only affects the data port. | |
| */ | |
| static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
| int port = 0x40 + 4 * ap->port_no; | |
| u8 idetcr, idefr; | |
| struct ata_timing at; | |
| static const u8 activebits[15] = { | |
| 0, 1, 2, 3, 4, | |
| 5, 5, 6, 6, 6, | |
| 6, 7, 7, 7, 7 | |
| }; | |
| static const u8 recoverbits[12] = { | |
| 0, 1, 2, 3, 4, 5, 6, 6, 7, 7, 7, 7 | |
| }; | |
| pci_read_config_byte(pdev, port + 3, &idefr); | |
| if (ata_pio_need_iordy(adev)) | |
| idefr |= 0x04; /* IORDY enable */ | |
| else | |
| idefr &= ~0x04; | |
| if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) { | |
| dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", adev->pio_mode); | |
| return; | |
| } | |
| at.active = FIT(at.active, 2, 16) - 2; | |
| at.setup = FIT(at.setup, 1, 4) - 1; | |
| at.recover = FIT(at.recover, 1, 12) - 1; | |
| idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active]; | |
| pci_write_config_byte(pdev, port, idetcr); | |
| pci_write_config_byte(pdev, port + 3, idefr); | |
| /* We use ap->private_data as a pointer to the device currently | |
| loaded for timing */ | |
| ap->private_data = adev; | |
| } | |
| /** | |
| * ns87410_qc_issue_prot - command issue | |
| * @qc: command pending | |
| * | |
| * Called when the libata layer is about to issue a command. We wrap | |
| * this interface so that we can load the correct ATA timings if | |
| * neccessary. | |
| */ | |
| static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc) | |
| { | |
| struct ata_port *ap = qc->ap; | |
| struct ata_device *adev = qc->dev; | |
| /* If modes have been configured and the channel data is not loaded | |
| then load it. We have to check if pio_mode is set as the core code | |
| does not set adev->pio_mode to XFER_PIO_0 while probing as would be | |
| logical */ | |
| if (adev->pio_mode && adev != ap->private_data) | |
| ns87410_set_piomode(ap, adev); | |
| return ata_qc_issue_prot(qc); | |
| } | |
| static struct scsi_host_template ns87410_sht = { | |
| .module = THIS_MODULE, | |
| .name = DRV_NAME, | |
| .ioctl = ata_scsi_ioctl, | |
| .queuecommand = ata_scsi_queuecmd, | |
| .can_queue = ATA_DEF_QUEUE, | |
| .this_id = ATA_SHT_THIS_ID, | |
| .sg_tablesize = LIBATA_MAX_PRD, | |
| .max_sectors = ATA_MAX_SECTORS, | |
| .cmd_per_lun = ATA_SHT_CMD_PER_LUN, | |
| .emulated = ATA_SHT_EMULATED, | |
| .use_clustering = ATA_SHT_USE_CLUSTERING, | |
| .proc_name = DRV_NAME, | |
| .dma_boundary = ATA_DMA_BOUNDARY, | |
| .slave_configure = ata_scsi_slave_config, | |
| .bios_param = ata_std_bios_param, | |
| }; | |
| static struct ata_port_operations ns87410_port_ops = { | |
| .port_disable = ata_port_disable, | |
| .set_piomode = ns87410_set_piomode, | |
| .tf_load = ata_tf_load, | |
| .tf_read = ata_tf_read, | |
| .check_status = ata_check_status, | |
| .exec_command = ata_exec_command, | |
| .dev_select = ata_std_dev_select, | |
| .freeze = ata_bmdma_freeze, | |
| .thaw = ata_bmdma_thaw, | |
| .error_handler = ns87410_error_handler, | |
| .post_internal_cmd = ata_bmdma_post_internal_cmd, | |
| .qc_prep = ata_qc_prep, | |
| .qc_issue = ns87410_qc_issue_prot, | |
| .data_xfer = ata_pio_data_xfer, | |
| .irq_handler = ata_interrupt, | |
| .irq_clear = ata_bmdma_irq_clear, | |
| .port_start = ata_port_start, | |
| .port_stop = ata_port_stop, | |
| .host_stop = ata_host_stop | |
| }; | |
| static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |
| { | |
| static struct ata_port_info info = { | |
| .sht = &ns87410_sht, | |
| .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, | |
| .pio_mask = 0x0F, | |
| .port_ops = &ns87410_port_ops | |
| }; | |
| static struct ata_port_info *port_info[2] = {&info, &info}; | |
| return ata_pci_init_one(dev, port_info, 2); | |
| } | |
| static const struct pci_device_id ns87410[] = { | |
| { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87410), }, | |
| { }, | |
| }; | |
| static struct pci_driver ns87410_pci_driver = { | |
| .name = DRV_NAME, | |
| .id_table = ns87410, | |
| .probe = ns87410_init_one, | |
| .remove = ata_pci_remove_one | |
| }; | |
| static int __init ns87410_init(void) | |
| { | |
| return pci_register_driver(&ns87410_pci_driver); | |
| } | |
| static void __exit ns87410_exit(void) | |
| { | |
| pci_unregister_driver(&ns87410_pci_driver); | |
| } | |
| MODULE_AUTHOR("Alan Cox"); | |
| MODULE_DESCRIPTION("low-level driver for Nat Semi 87410"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DEVICE_TABLE(pci, ns87410); | |
| MODULE_VERSION(DRV_VERSION); | |
| module_init(ns87410_init); | |
| module_exit(ns87410_exit); |