| /* | |
| * Copyright (C) 2004 IBM Corporation | |
| * | |
| * Authors: | |
| * Leendert van Doorn <leendert@watson.ibm.com> | |
| * Dave Safford <safford@watson.ibm.com> | |
| * Reiner Sailer <sailer@watson.ibm.com> | |
| * Kylene Hall <kjhall@us.ibm.com> | |
| * | |
| * Maintained by: <tpmdd_devel@lists.sourceforge.net> | |
| * | |
| * Device driver for TCG/TCPA TPM (trusted platform module). | |
| * Specifications at www.trustedcomputinggroup.org | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation, version 2 of the | |
| * License. | |
| * | |
| */ | |
| #include <linux/platform_device.h> | |
| #include "tpm.h" | |
| /* National definitions */ | |
| enum tpm_nsc_addr{ | |
| TPM_NSC_IRQ = 0x07, | |
| TPM_NSC_BASE0_HI = 0x60, | |
| TPM_NSC_BASE0_LO = 0x61, | |
| TPM_NSC_BASE1_HI = 0x62, | |
| TPM_NSC_BASE1_LO = 0x63 | |
| }; | |
| enum tpm_nsc_index { | |
| NSC_LDN_INDEX = 0x07, | |
| NSC_SID_INDEX = 0x20, | |
| NSC_LDC_INDEX = 0x30, | |
| NSC_DIO_INDEX = 0x60, | |
| NSC_CIO_INDEX = 0x62, | |
| NSC_IRQ_INDEX = 0x70, | |
| NSC_ITS_INDEX = 0x71 | |
| }; | |
| enum tpm_nsc_status_loc { | |
| NSC_STATUS = 0x01, | |
| NSC_COMMAND = 0x01, | |
| NSC_DATA = 0x00 | |
| }; | |
| /* status bits */ | |
| enum tpm_nsc_status { | |
| NSC_STATUS_OBF = 0x01, /* output buffer full */ | |
| NSC_STATUS_IBF = 0x02, /* input buffer full */ | |
| NSC_STATUS_F0 = 0x04, /* F0 */ | |
| NSC_STATUS_A2 = 0x08, /* A2 */ | |
| NSC_STATUS_RDY = 0x10, /* ready to receive command */ | |
| NSC_STATUS_IBR = 0x20 /* ready to receive data */ | |
| }; | |
| /* command bits */ | |
| enum tpm_nsc_cmd_mode { | |
| NSC_COMMAND_NORMAL = 0x01, /* normal mode */ | |
| NSC_COMMAND_EOC = 0x03, | |
| NSC_COMMAND_CANCEL = 0x22 | |
| }; | |
| /* | |
| * Wait for a certain status to appear | |
| */ | |
| static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data) | |
| { | |
| unsigned long stop; | |
| /* status immediately available check */ | |
| *data = inb(chip->vendor.base + NSC_STATUS); | |
| if ((*data & mask) == val) | |
| return 0; | |
| /* wait for status */ | |
| stop = jiffies + 10 * HZ; | |
| do { | |
| msleep(TPM_TIMEOUT); | |
| *data = inb(chip->vendor.base + 1); | |
| if ((*data & mask) == val) | |
| return 0; | |
| } | |
| while (time_before(jiffies, stop)); | |
| return -EBUSY; | |
| } | |
| static int nsc_wait_for_ready(struct tpm_chip *chip) | |
| { | |
| int status; | |
| unsigned long stop; | |
| /* status immediately available check */ | |
| status = inb(chip->vendor.base + NSC_STATUS); | |
| if (status & NSC_STATUS_OBF) | |
| status = inb(chip->vendor.base + NSC_DATA); | |
| if (status & NSC_STATUS_RDY) | |
| return 0; | |
| /* wait for status */ | |
| stop = jiffies + 100; | |
| do { | |
| msleep(TPM_TIMEOUT); | |
| status = inb(chip->vendor.base + NSC_STATUS); | |
| if (status & NSC_STATUS_OBF) | |
| status = inb(chip->vendor.base + NSC_DATA); | |
| if (status & NSC_STATUS_RDY) | |
| return 0; | |
| } | |
| while (time_before(jiffies, stop)); | |
| dev_info(chip->dev, "wait for ready failed\n"); | |
| return -EBUSY; | |
| } | |
| static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count) | |
| { | |
| u8 *buffer = buf; | |
| u8 data, *p; | |
| u32 size; | |
| __be32 *native_size; | |
| if (count < 6) | |
| return -EIO; | |
| if (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0) { | |
| dev_err(chip->dev, "F0 timeout\n"); | |
| return -EIO; | |
| } | |
| if ((data = | |
| inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_NORMAL) { | |
| dev_err(chip->dev, "not in normal mode (0x%x)\n", | |
| data); | |
| return -EIO; | |
| } | |
| /* read the whole packet */ | |
| for (p = buffer; p < &buffer[count]; p++) { | |
| if (wait_for_stat | |
| (chip, NSC_STATUS_OBF, NSC_STATUS_OBF, &data) < 0) { | |
| dev_err(chip->dev, | |
| "OBF timeout (while reading data)\n"); | |
| return -EIO; | |
| } | |
| if (data & NSC_STATUS_F0) | |
| break; | |
| *p = inb(chip->vendor.base + NSC_DATA); | |
| } | |
| if ((data & NSC_STATUS_F0) == 0 && | |
| (wait_for_stat(chip, NSC_STATUS_F0, NSC_STATUS_F0, &data) < 0)) { | |
| dev_err(chip->dev, "F0 not set\n"); | |
| return -EIO; | |
| } | |
| if ((data = inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_EOC) { | |
| dev_err(chip->dev, | |
| "expected end of command(0x%x)\n", data); | |
| return -EIO; | |
| } | |
| native_size = (__force __be32 *) (buf + 2); | |
| size = be32_to_cpu(*native_size); | |
| if (count < size) | |
| return -EIO; | |
| return size; | |
| } | |
| static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count) | |
| { | |
| u8 data; | |
| int i; | |
| /* | |
| * If we hit the chip with back to back commands it locks up | |
| * and never set IBF. Hitting it with this "hammer" seems to | |
| * fix it. Not sure why this is needed, we followed the flow | |
| * chart in the manual to the letter. | |
| */ | |
| outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND); | |
| if (nsc_wait_for_ready(chip) != 0) | |
| return -EIO; | |
| if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) { | |
| dev_err(chip->dev, "IBF timeout\n"); | |
| return -EIO; | |
| } | |
| outb(NSC_COMMAND_NORMAL, chip->vendor.base + NSC_COMMAND); | |
| if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) { | |
| dev_err(chip->dev, "IBR timeout\n"); | |
| return -EIO; | |
| } | |
| for (i = 0; i < count; i++) { | |
| if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) { | |
| dev_err(chip->dev, | |
| "IBF timeout (while writing data)\n"); | |
| return -EIO; | |
| } | |
| outb(buf[i], chip->vendor.base + NSC_DATA); | |
| } | |
| if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) { | |
| dev_err(chip->dev, "IBF timeout\n"); | |
| return -EIO; | |
| } | |
| outb(NSC_COMMAND_EOC, chip->vendor.base + NSC_COMMAND); | |
| return count; | |
| } | |
| static void tpm_nsc_cancel(struct tpm_chip *chip) | |
| { | |
| outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND); | |
| } | |
| static u8 tpm_nsc_status(struct tpm_chip *chip) | |
| { | |
| return inb(chip->vendor.base + NSC_STATUS); | |
| } | |
| static const struct file_operations nsc_ops = { | |
| .owner = THIS_MODULE, | |
| .llseek = no_llseek, | |
| .open = tpm_open, | |
| .read = tpm_read, | |
| .write = tpm_write, | |
| .release = tpm_release, | |
| }; | |
| static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); | |
| static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL); | |
| static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL); | |
| static DEVICE_ATTR(cancel, S_IWUSR|S_IWGRP, NULL, tpm_store_cancel); | |
| static struct attribute * nsc_attrs[] = { | |
| &dev_attr_pubek.attr, | |
| &dev_attr_pcrs.attr, | |
| &dev_attr_caps.attr, | |
| &dev_attr_cancel.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group nsc_attr_grp = { .attrs = nsc_attrs }; | |
| static const struct tpm_vendor_specific tpm_nsc = { | |
| .recv = tpm_nsc_recv, | |
| .send = tpm_nsc_send, | |
| .cancel = tpm_nsc_cancel, | |
| .status = tpm_nsc_status, | |
| .req_complete_mask = NSC_STATUS_OBF, | |
| .req_complete_val = NSC_STATUS_OBF, | |
| .req_canceled = NSC_STATUS_RDY, | |
| .attr_group = &nsc_attr_grp, | |
| .miscdev = { .fops = &nsc_ops, }, | |
| }; | |
| static struct platform_device *pdev = NULL; | |
| static void __devexit tpm_nsc_remove(struct device *dev) | |
| { | |
| struct tpm_chip *chip = dev_get_drvdata(dev); | |
| if ( chip ) { | |
| release_region(chip->vendor.base, 2); | |
| tpm_remove_hardware(chip->dev); | |
| } | |
| } | |
| static struct device_driver nsc_drv = { | |
| .name = "tpm_nsc", | |
| .bus = &platform_bus_type, | |
| .owner = THIS_MODULE, | |
| .suspend = tpm_pm_suspend, | |
| .resume = tpm_pm_resume, | |
| }; | |
| static int __init init_nsc(void) | |
| { | |
| int rc = 0; | |
| int lo, hi, err; | |
| int nscAddrBase = TPM_ADDR; | |
| struct tpm_chip *chip; | |
| unsigned long base; | |
| /* verify that it is a National part (SID) */ | |
| if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) { | |
| nscAddrBase = (tpm_read_index(TPM_SUPERIO_ADDR, 0x2C)<<8)| | |
| (tpm_read_index(TPM_SUPERIO_ADDR, 0x2B)&0xFE); | |
| if (tpm_read_index(nscAddrBase, NSC_SID_INDEX) != 0xF6) | |
| return -ENODEV; | |
| } | |
| err = driver_register(&nsc_drv); | |
| if (err) | |
| return err; | |
| hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI); | |
| lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO); | |
| base = (hi<<8) | lo; | |
| /* enable the DPM module */ | |
| tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01); | |
| pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL); | |
| if (!pdev) { | |
| rc = -ENOMEM; | |
| goto err_unreg_drv; | |
| } | |
| pdev->name = "tpm_nscl0"; | |
| pdev->id = -1; | |
| pdev->num_resources = 0; | |
| pdev->dev.release = tpm_nsc_remove; | |
| pdev->dev.driver = &nsc_drv; | |
| if ((rc = platform_device_register(pdev)) < 0) | |
| goto err_free_dev; | |
| if (request_region(base, 2, "tpm_nsc0") == NULL ) { | |
| rc = -EBUSY; | |
| goto err_unreg_dev; | |
| } | |
| if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_nsc))) { | |
| rc = -ENODEV; | |
| goto err_rel_reg; | |
| } | |
| dev_dbg(&pdev->dev, "NSC TPM detected\n"); | |
| dev_dbg(&pdev->dev, | |
| "NSC LDN 0x%x, SID 0x%x, SRID 0x%x\n", | |
| tpm_read_index(nscAddrBase,0x07), tpm_read_index(nscAddrBase,0x20), | |
| tpm_read_index(nscAddrBase,0x27)); | |
| dev_dbg(&pdev->dev, | |
| "NSC SIOCF1 0x%x SIOCF5 0x%x SIOCF6 0x%x SIOCF8 0x%x\n", | |
| tpm_read_index(nscAddrBase,0x21), tpm_read_index(nscAddrBase,0x25), | |
| tpm_read_index(nscAddrBase,0x26), tpm_read_index(nscAddrBase,0x28)); | |
| dev_dbg(&pdev->dev, "NSC IO Base0 0x%x\n", | |
| (tpm_read_index(nscAddrBase,0x60) << 8) | tpm_read_index(nscAddrBase,0x61)); | |
| dev_dbg(&pdev->dev, "NSC IO Base1 0x%x\n", | |
| (tpm_read_index(nscAddrBase,0x62) << 8) | tpm_read_index(nscAddrBase,0x63)); | |
| dev_dbg(&pdev->dev, "NSC Interrupt number and wakeup 0x%x\n", | |
| tpm_read_index(nscAddrBase,0x70)); | |
| dev_dbg(&pdev->dev, "NSC IRQ type select 0x%x\n", | |
| tpm_read_index(nscAddrBase,0x71)); | |
| dev_dbg(&pdev->dev, | |
| "NSC DMA channel select0 0x%x, select1 0x%x\n", | |
| tpm_read_index(nscAddrBase,0x74), tpm_read_index(nscAddrBase,0x75)); | |
| dev_dbg(&pdev->dev, | |
| "NSC Config " | |
| "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", | |
| tpm_read_index(nscAddrBase,0xF0), tpm_read_index(nscAddrBase,0xF1), | |
| tpm_read_index(nscAddrBase,0xF2), tpm_read_index(nscAddrBase,0xF3), | |
| tpm_read_index(nscAddrBase,0xF4), tpm_read_index(nscAddrBase,0xF5), | |
| tpm_read_index(nscAddrBase,0xF6), tpm_read_index(nscAddrBase,0xF7), | |
| tpm_read_index(nscAddrBase,0xF8), tpm_read_index(nscAddrBase,0xF9)); | |
| dev_info(&pdev->dev, | |
| "NSC TPM revision %d\n", | |
| tpm_read_index(nscAddrBase, 0x27) & 0x1F); | |
| chip->vendor.base = base; | |
| return 0; | |
| err_rel_reg: | |
| release_region(base, 2); | |
| err_unreg_dev: | |
| platform_device_unregister(pdev); | |
| err_free_dev: | |
| kfree(pdev); | |
| err_unreg_drv: | |
| driver_unregister(&nsc_drv); | |
| return rc; | |
| } | |
| static void __exit cleanup_nsc(void) | |
| { | |
| if (pdev) { | |
| tpm_nsc_remove(&pdev->dev); | |
| platform_device_unregister(pdev); | |
| kfree(pdev); | |
| pdev = NULL; | |
| } | |
| driver_unregister(&nsc_drv); | |
| } | |
| module_init(init_nsc); | |
| module_exit(cleanup_nsc); | |
| MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)"); | |
| MODULE_DESCRIPTION("TPM Driver"); | |
| MODULE_VERSION("2.0"); | |
| MODULE_LICENSE("GPL"); |