| /* | |
| * drivers/cpufreq/cpufreq_ondemand.c | |
| * | |
| * Copyright (C) 2001 Russell King | |
| * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. | |
| * Jun Nakajima <jun.nakajima@intel.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/cpu.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/mutex.h> | |
| /* | |
| * dbs is used in this file as a shortform for demandbased switching | |
| * It helps to keep variable names smaller, simpler | |
| */ | |
| #define DEF_FREQUENCY_UP_THRESHOLD (80) | |
| #define MIN_FREQUENCY_UP_THRESHOLD (11) | |
| #define MAX_FREQUENCY_UP_THRESHOLD (100) | |
| /* | |
| * The polling frequency of this governor depends on the capability of | |
| * the processor. Default polling frequency is 1000 times the transition | |
| * latency of the processor. The governor will work on any processor with | |
| * transition latency <= 10mS, using appropriate sampling | |
| * rate. | |
| * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL) | |
| * this governor will not work. | |
| * All times here are in uS. | |
| */ | |
| static unsigned int def_sampling_rate; | |
| #define MIN_SAMPLING_RATE_RATIO (2) | |
| /* for correct statistics, we need at least 10 ticks between each measure */ | |
| #define MIN_STAT_SAMPLING_RATE (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10)) | |
| #define MIN_SAMPLING_RATE (def_sampling_rate / MIN_SAMPLING_RATE_RATIO) | |
| #define MAX_SAMPLING_RATE (500 * def_sampling_rate) | |
| #define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000) | |
| #define TRANSITION_LATENCY_LIMIT (10 * 1000) | |
| static void do_dbs_timer(void *data); | |
| struct cpu_dbs_info_s { | |
| cputime64_t prev_cpu_idle; | |
| cputime64_t prev_cpu_wall; | |
| struct cpufreq_policy *cur_policy; | |
| struct work_struct work; | |
| unsigned int enable; | |
| struct cpufreq_frequency_table *freq_table; | |
| unsigned int freq_lo; | |
| unsigned int freq_lo_jiffies; | |
| unsigned int freq_hi_jiffies; | |
| }; | |
| static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); | |
| static unsigned int dbs_enable; /* number of CPUs using this policy */ | |
| /* | |
| * DEADLOCK ALERT! There is a ordering requirement between cpu_hotplug | |
| * lock and dbs_mutex. cpu_hotplug lock should always be held before | |
| * dbs_mutex. If any function that can potentially take cpu_hotplug lock | |
| * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then | |
| * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock | |
| * is recursive for the same process. -Venki | |
| */ | |
| static DEFINE_MUTEX(dbs_mutex); | |
| static struct workqueue_struct *kondemand_wq; | |
| static struct dbs_tuners { | |
| unsigned int sampling_rate; | |
| unsigned int up_threshold; | |
| unsigned int ignore_nice; | |
| unsigned int powersave_bias; | |
| } dbs_tuners_ins = { | |
| .up_threshold = DEF_FREQUENCY_UP_THRESHOLD, | |
| .ignore_nice = 0, | |
| .powersave_bias = 0, | |
| }; | |
| static inline cputime64_t get_cpu_idle_time(unsigned int cpu) | |
| { | |
| cputime64_t retval; | |
| retval = cputime64_add(kstat_cpu(cpu).cpustat.idle, | |
| kstat_cpu(cpu).cpustat.iowait); | |
| if (dbs_tuners_ins.ignore_nice) | |
| retval = cputime64_add(retval, kstat_cpu(cpu).cpustat.nice); | |
| return retval; | |
| } | |
| /* | |
| * Find right freq to be set now with powersave_bias on. | |
| * Returns the freq_hi to be used right now and will set freq_hi_jiffies, | |
| * freq_lo, and freq_lo_jiffies in percpu area for averaging freqs. | |
| */ | |
| static unsigned int powersave_bias_target(struct cpufreq_policy *policy, | |
| unsigned int freq_next, | |
| unsigned int relation) | |
| { | |
| unsigned int freq_req, freq_reduc, freq_avg; | |
| unsigned int freq_hi, freq_lo; | |
| unsigned int index = 0; | |
| unsigned int jiffies_total, jiffies_hi, jiffies_lo; | |
| struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, policy->cpu); | |
| if (!dbs_info->freq_table) { | |
| dbs_info->freq_lo = 0; | |
| dbs_info->freq_lo_jiffies = 0; | |
| return freq_next; | |
| } | |
| cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_next, | |
| relation, &index); | |
| freq_req = dbs_info->freq_table[index].frequency; | |
| freq_reduc = freq_req * dbs_tuners_ins.powersave_bias / 1000; | |
| freq_avg = freq_req - freq_reduc; | |
| /* Find freq bounds for freq_avg in freq_table */ | |
| index = 0; | |
| cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_avg, | |
| CPUFREQ_RELATION_H, &index); | |
| freq_lo = dbs_info->freq_table[index].frequency; | |
| index = 0; | |
| cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_avg, | |
| CPUFREQ_RELATION_L, &index); | |
| freq_hi = dbs_info->freq_table[index].frequency; | |
| /* Find out how long we have to be in hi and lo freqs */ | |
| if (freq_hi == freq_lo) { | |
| dbs_info->freq_lo = 0; | |
| dbs_info->freq_lo_jiffies = 0; | |
| return freq_lo; | |
| } | |
| jiffies_total = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); | |
| jiffies_hi = (freq_avg - freq_lo) * jiffies_total; | |
| jiffies_hi += ((freq_hi - freq_lo) / 2); | |
| jiffies_hi /= (freq_hi - freq_lo); | |
| jiffies_lo = jiffies_total - jiffies_hi; | |
| dbs_info->freq_lo = freq_lo; | |
| dbs_info->freq_lo_jiffies = jiffies_lo; | |
| dbs_info->freq_hi_jiffies = jiffies_hi; | |
| return freq_hi; | |
| } | |
| static void ondemand_powersave_bias_init(void) | |
| { | |
| int i; | |
| for_each_online_cpu(i) { | |
| struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, i); | |
| dbs_info->freq_table = cpufreq_frequency_get_table(i); | |
| dbs_info->freq_lo = 0; | |
| } | |
| } | |
| /************************** sysfs interface ************************/ | |
| static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf) | |
| { | |
| return sprintf (buf, "%u\n", MAX_SAMPLING_RATE); | |
| } | |
| static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf) | |
| { | |
| return sprintf (buf, "%u\n", MIN_SAMPLING_RATE); | |
| } | |
| #define define_one_ro(_name) \ | |
| static struct freq_attr _name = \ | |
| __ATTR(_name, 0444, show_##_name, NULL) | |
| define_one_ro(sampling_rate_max); | |
| define_one_ro(sampling_rate_min); | |
| /* cpufreq_ondemand Governor Tunables */ | |
| #define show_one(file_name, object) \ | |
| static ssize_t show_##file_name \ | |
| (struct cpufreq_policy *unused, char *buf) \ | |
| { \ | |
| return sprintf(buf, "%u\n", dbs_tuners_ins.object); \ | |
| } | |
| show_one(sampling_rate, sampling_rate); | |
| show_one(up_threshold, up_threshold); | |
| show_one(ignore_nice_load, ignore_nice); | |
| show_one(powersave_bias, powersave_bias); | |
| static ssize_t store_sampling_rate(struct cpufreq_policy *unused, | |
| const char *buf, size_t count) | |
| { | |
| unsigned int input; | |
| int ret; | |
| ret = sscanf(buf, "%u", &input); | |
| mutex_lock(&dbs_mutex); | |
| if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) { | |
| mutex_unlock(&dbs_mutex); | |
| return -EINVAL; | |
| } | |
| dbs_tuners_ins.sampling_rate = input; | |
| mutex_unlock(&dbs_mutex); | |
| return count; | |
| } | |
| static ssize_t store_up_threshold(struct cpufreq_policy *unused, | |
| const char *buf, size_t count) | |
| { | |
| unsigned int input; | |
| int ret; | |
| ret = sscanf(buf, "%u", &input); | |
| mutex_lock(&dbs_mutex); | |
| if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || | |
| input < MIN_FREQUENCY_UP_THRESHOLD) { | |
| mutex_unlock(&dbs_mutex); | |
| return -EINVAL; | |
| } | |
| dbs_tuners_ins.up_threshold = input; | |
| mutex_unlock(&dbs_mutex); | |
| return count; | |
| } | |
| static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy, | |
| const char *buf, size_t count) | |
| { | |
| unsigned int input; | |
| int ret; | |
| unsigned int j; | |
| ret = sscanf(buf, "%u", &input); | |
| if ( ret != 1 ) | |
| return -EINVAL; | |
| if ( input > 1 ) | |
| input = 1; | |
| mutex_lock(&dbs_mutex); | |
| if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */ | |
| mutex_unlock(&dbs_mutex); | |
| return count; | |
| } | |
| dbs_tuners_ins.ignore_nice = input; | |
| /* we need to re-evaluate prev_cpu_idle */ | |
| for_each_online_cpu(j) { | |
| struct cpu_dbs_info_s *dbs_info; | |
| dbs_info = &per_cpu(cpu_dbs_info, j); | |
| dbs_info->prev_cpu_idle = get_cpu_idle_time(j); | |
| dbs_info->prev_cpu_wall = get_jiffies_64(); | |
| } | |
| mutex_unlock(&dbs_mutex); | |
| return count; | |
| } | |
| static ssize_t store_powersave_bias(struct cpufreq_policy *unused, | |
| const char *buf, size_t count) | |
| { | |
| unsigned int input; | |
| int ret; | |
| ret = sscanf(buf, "%u", &input); | |
| if (ret != 1) | |
| return -EINVAL; | |
| if (input > 1000) | |
| input = 1000; | |
| mutex_lock(&dbs_mutex); | |
| dbs_tuners_ins.powersave_bias = input; | |
| ondemand_powersave_bias_init(); | |
| mutex_unlock(&dbs_mutex); | |
| return count; | |
| } | |
| #define define_one_rw(_name) \ | |
| static struct freq_attr _name = \ | |
| __ATTR(_name, 0644, show_##_name, store_##_name) | |
| define_one_rw(sampling_rate); | |
| define_one_rw(up_threshold); | |
| define_one_rw(ignore_nice_load); | |
| define_one_rw(powersave_bias); | |
| static struct attribute * dbs_attributes[] = { | |
| &sampling_rate_max.attr, | |
| &sampling_rate_min.attr, | |
| &sampling_rate.attr, | |
| &up_threshold.attr, | |
| &ignore_nice_load.attr, | |
| &powersave_bias.attr, | |
| NULL | |
| }; | |
| static struct attribute_group dbs_attr_group = { | |
| .attrs = dbs_attributes, | |
| .name = "ondemand", | |
| }; | |
| /************************** sysfs end ************************/ | |
| static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info) | |
| { | |
| unsigned int idle_ticks, total_ticks; | |
| unsigned int load; | |
| cputime64_t cur_jiffies; | |
| struct cpufreq_policy *policy; | |
| unsigned int j; | |
| if (!this_dbs_info->enable) | |
| return; | |
| this_dbs_info->freq_lo = 0; | |
| policy = this_dbs_info->cur_policy; | |
| cur_jiffies = jiffies64_to_cputime64(get_jiffies_64()); | |
| total_ticks = (unsigned int) cputime64_sub(cur_jiffies, | |
| this_dbs_info->prev_cpu_wall); | |
| this_dbs_info->prev_cpu_wall = cur_jiffies; | |
| if (!total_ticks) | |
| return; | |
| /* | |
| * Every sampling_rate, we check, if current idle time is less | |
| * than 20% (default), then we try to increase frequency | |
| * Every sampling_rate, we look for a the lowest | |
| * frequency which can sustain the load while keeping idle time over | |
| * 30%. If such a frequency exist, we try to decrease to this frequency. | |
| * | |
| * Any frequency increase takes it to the maximum frequency. | |
| * Frequency reduction happens at minimum steps of | |
| * 5% (default) of current frequency | |
| */ | |
| /* Get Idle Time */ | |
| idle_ticks = UINT_MAX; | |
| for_each_cpu_mask(j, policy->cpus) { | |
| cputime64_t total_idle_ticks; | |
| unsigned int tmp_idle_ticks; | |
| struct cpu_dbs_info_s *j_dbs_info; | |
| j_dbs_info = &per_cpu(cpu_dbs_info, j); | |
| total_idle_ticks = get_cpu_idle_time(j); | |
| tmp_idle_ticks = (unsigned int) cputime64_sub(total_idle_ticks, | |
| j_dbs_info->prev_cpu_idle); | |
| j_dbs_info->prev_cpu_idle = total_idle_ticks; | |
| if (tmp_idle_ticks < idle_ticks) | |
| idle_ticks = tmp_idle_ticks; | |
| } | |
| load = (100 * (total_ticks - idle_ticks)) / total_ticks; | |
| /* Check for frequency increase */ | |
| if (load > dbs_tuners_ins.up_threshold) { | |
| /* if we are already at full speed then break out early */ | |
| if (!dbs_tuners_ins.powersave_bias) { | |
| if (policy->cur == policy->max) | |
| return; | |
| __cpufreq_driver_target(policy, policy->max, | |
| CPUFREQ_RELATION_H); | |
| } else { | |
| int freq = powersave_bias_target(policy, policy->max, | |
| CPUFREQ_RELATION_H); | |
| __cpufreq_driver_target(policy, freq, | |
| CPUFREQ_RELATION_L); | |
| } | |
| return; | |
| } | |
| /* Check for frequency decrease */ | |
| /* if we cannot reduce the frequency anymore, break out early */ | |
| if (policy->cur == policy->min) | |
| return; | |
| /* | |
| * The optimal frequency is the frequency that is the lowest that | |
| * can support the current CPU usage without triggering the up | |
| * policy. To be safe, we focus 10 points under the threshold. | |
| */ | |
| if (load < (dbs_tuners_ins.up_threshold - 10)) { | |
| unsigned int freq_next = (policy->cur * load) / | |
| (dbs_tuners_ins.up_threshold - 10); | |
| if (!dbs_tuners_ins.powersave_bias) { | |
| __cpufreq_driver_target(policy, freq_next, | |
| CPUFREQ_RELATION_L); | |
| } else { | |
| int freq = powersave_bias_target(policy, freq_next, | |
| CPUFREQ_RELATION_L); | |
| __cpufreq_driver_target(policy, freq, | |
| CPUFREQ_RELATION_L); | |
| } | |
| } | |
| } | |
| /* Sampling types */ | |
| enum {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE}; | |
| static void do_dbs_timer(void *data) | |
| { | |
| unsigned int cpu = smp_processor_id(); | |
| struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu); | |
| /* We want all CPUs to do sampling nearly on same jiffy */ | |
| int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); | |
| delay -= jiffies % delay; | |
| if (!dbs_info->enable) | |
| return; | |
| /* Common NORMAL_SAMPLE setup */ | |
| INIT_WORK(&dbs_info->work, do_dbs_timer, (void *)DBS_NORMAL_SAMPLE); | |
| if (!dbs_tuners_ins.powersave_bias || | |
| (unsigned long) data == DBS_NORMAL_SAMPLE) { | |
| lock_cpu_hotplug(); | |
| dbs_check_cpu(dbs_info); | |
| unlock_cpu_hotplug(); | |
| if (dbs_info->freq_lo) { | |
| /* Setup timer for SUB_SAMPLE */ | |
| INIT_WORK(&dbs_info->work, do_dbs_timer, | |
| (void *)DBS_SUB_SAMPLE); | |
| delay = dbs_info->freq_hi_jiffies; | |
| } | |
| } else { | |
| __cpufreq_driver_target(dbs_info->cur_policy, | |
| dbs_info->freq_lo, | |
| CPUFREQ_RELATION_H); | |
| } | |
| queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay); | |
| } | |
| static inline void dbs_timer_init(unsigned int cpu) | |
| { | |
| struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu); | |
| /* We want all CPUs to do sampling nearly on same jiffy */ | |
| int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate); | |
| delay -= jiffies % delay; | |
| ondemand_powersave_bias_init(); | |
| INIT_WORK(&dbs_info->work, do_dbs_timer, NULL); | |
| queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay); | |
| } | |
| static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) | |
| { | |
| dbs_info->enable = 0; | |
| cancel_delayed_work(&dbs_info->work); | |
| flush_workqueue(kondemand_wq); | |
| } | |
| static int cpufreq_governor_dbs(struct cpufreq_policy *policy, | |
| unsigned int event) | |
| { | |
| unsigned int cpu = policy->cpu; | |
| struct cpu_dbs_info_s *this_dbs_info; | |
| unsigned int j; | |
| this_dbs_info = &per_cpu(cpu_dbs_info, cpu); | |
| switch (event) { | |
| case CPUFREQ_GOV_START: | |
| if ((!cpu_online(cpu)) || (!policy->cur)) | |
| return -EINVAL; | |
| if (policy->cpuinfo.transition_latency > | |
| (TRANSITION_LATENCY_LIMIT * 1000)) { | |
| printk(KERN_WARNING "ondemand governor failed to load " | |
| "due to too long transition latency\n"); | |
| return -EINVAL; | |
| } | |
| if (this_dbs_info->enable) /* Already enabled */ | |
| break; | |
| mutex_lock(&dbs_mutex); | |
| dbs_enable++; | |
| if (dbs_enable == 1) { | |
| kondemand_wq = create_workqueue("kondemand"); | |
| if (!kondemand_wq) { | |
| printk(KERN_ERR "Creation of kondemand failed\n"); | |
| dbs_enable--; | |
| mutex_unlock(&dbs_mutex); | |
| return -ENOSPC; | |
| } | |
| } | |
| for_each_cpu_mask(j, policy->cpus) { | |
| struct cpu_dbs_info_s *j_dbs_info; | |
| j_dbs_info = &per_cpu(cpu_dbs_info, j); | |
| j_dbs_info->cur_policy = policy; | |
| j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j); | |
| j_dbs_info->prev_cpu_wall = get_jiffies_64(); | |
| } | |
| this_dbs_info->enable = 1; | |
| sysfs_create_group(&policy->kobj, &dbs_attr_group); | |
| /* | |
| * Start the timerschedule work, when this governor | |
| * is used for first time | |
| */ | |
| if (dbs_enable == 1) { | |
| unsigned int latency; | |
| /* policy latency is in nS. Convert it to uS first */ | |
| latency = policy->cpuinfo.transition_latency / 1000; | |
| if (latency == 0) | |
| latency = 1; | |
| def_sampling_rate = latency * | |
| DEF_SAMPLING_RATE_LATENCY_MULTIPLIER; | |
| if (def_sampling_rate < MIN_STAT_SAMPLING_RATE) | |
| def_sampling_rate = MIN_STAT_SAMPLING_RATE; | |
| dbs_tuners_ins.sampling_rate = def_sampling_rate; | |
| } | |
| dbs_timer_init(policy->cpu); | |
| mutex_unlock(&dbs_mutex); | |
| break; | |
| case CPUFREQ_GOV_STOP: | |
| mutex_lock(&dbs_mutex); | |
| dbs_timer_exit(this_dbs_info); | |
| sysfs_remove_group(&policy->kobj, &dbs_attr_group); | |
| dbs_enable--; | |
| if (dbs_enable == 0) | |
| destroy_workqueue(kondemand_wq); | |
| mutex_unlock(&dbs_mutex); | |
| break; | |
| case CPUFREQ_GOV_LIMITS: | |
| mutex_lock(&dbs_mutex); | |
| if (policy->max < this_dbs_info->cur_policy->cur) | |
| __cpufreq_driver_target(this_dbs_info->cur_policy, | |
| policy->max, | |
| CPUFREQ_RELATION_H); | |
| else if (policy->min > this_dbs_info->cur_policy->cur) | |
| __cpufreq_driver_target(this_dbs_info->cur_policy, | |
| policy->min, | |
| CPUFREQ_RELATION_L); | |
| mutex_unlock(&dbs_mutex); | |
| break; | |
| } | |
| return 0; | |
| } | |
| static struct cpufreq_governor cpufreq_gov_dbs = { | |
| .name = "ondemand", | |
| .governor = cpufreq_governor_dbs, | |
| .owner = THIS_MODULE, | |
| }; | |
| static int __init cpufreq_gov_dbs_init(void) | |
| { | |
| return cpufreq_register_governor(&cpufreq_gov_dbs); | |
| } | |
| static void __exit cpufreq_gov_dbs_exit(void) | |
| { | |
| cpufreq_unregister_governor(&cpufreq_gov_dbs); | |
| } | |
| MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>"); | |
| MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>"); | |
| MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for " | |
| "Low Latency Frequency Transition capable processors"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(cpufreq_gov_dbs_init); | |
| module_exit(cpufreq_gov_dbs_exit); |