| /* | |
| adm1021.c - Part of lm_sensors, Linux kernel modules for hardware | |
| monitoring | |
| Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and | |
| Philip Edelbrock <phil@netroedge.com> | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/i2c.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| /* Addresses to scan */ | |
| static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, | |
| 0x29, 0x2a, 0x2b, | |
| 0x4c, 0x4d, 0x4e, | |
| I2C_CLIENT_END }; | |
| /* Insmod parameters */ | |
| I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066); | |
| /* adm1021 constants specified below */ | |
| /* The adm1021 registers */ | |
| /* Read-only */ | |
| #define ADM1021_REG_TEMP 0x00 | |
| #define ADM1021_REG_REMOTE_TEMP 0x01 | |
| #define ADM1021_REG_STATUS 0x02 | |
| #define ADM1021_REG_MAN_ID 0x0FE /* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/ | |
| #define ADM1021_REG_DEV_ID 0x0FF /* ADM1021 = 0x0X, ADM1023 = 0x3X */ | |
| #define ADM1021_REG_DIE_CODE 0x0FF /* MAX1617A */ | |
| /* These use different addresses for reading/writing */ | |
| #define ADM1021_REG_CONFIG_R 0x03 | |
| #define ADM1021_REG_CONFIG_W 0x09 | |
| #define ADM1021_REG_CONV_RATE_R 0x04 | |
| #define ADM1021_REG_CONV_RATE_W 0x0A | |
| /* These are for the ADM1023's additional precision on the remote temp sensor */ | |
| #define ADM1021_REG_REM_TEMP_PREC 0x010 | |
| #define ADM1021_REG_REM_OFFSET 0x011 | |
| #define ADM1021_REG_REM_OFFSET_PREC 0x012 | |
| #define ADM1021_REG_REM_TOS_PREC 0x013 | |
| #define ADM1021_REG_REM_THYST_PREC 0x014 | |
| /* limits */ | |
| #define ADM1021_REG_TOS_R 0x05 | |
| #define ADM1021_REG_TOS_W 0x0B | |
| #define ADM1021_REG_REMOTE_TOS_R 0x07 | |
| #define ADM1021_REG_REMOTE_TOS_W 0x0D | |
| #define ADM1021_REG_THYST_R 0x06 | |
| #define ADM1021_REG_THYST_W 0x0C | |
| #define ADM1021_REG_REMOTE_THYST_R 0x08 | |
| #define ADM1021_REG_REMOTE_THYST_W 0x0E | |
| /* write-only */ | |
| #define ADM1021_REG_ONESHOT 0x0F | |
| /* Conversions. Rounding and limit checking is only done on the TO_REG | |
| variants. Note that you should be a bit careful with which arguments | |
| these macros are called: arguments may be evaluated more than once. | |
| Fixing this is just not worth it. */ | |
| /* Conversions note: 1021 uses normal integer signed-byte format*/ | |
| #define TEMP_FROM_REG(val) (val > 127 ? (val-256)*1000 : val*1000) | |
| #define TEMP_TO_REG(val) (SENSORS_LIMIT((val < 0 ? (val/1000)+256 : val/1000),0,255)) | |
| /* Initial values */ | |
| /* Note: Even though I left the low and high limits named os and hyst, | |
| they don't quite work like a thermostat the way the LM75 does. I.e., | |
| a lower temp than THYST actually triggers an alarm instead of | |
| clearing it. Weird, ey? --Phil */ | |
| /* Each client has this additional data */ | |
| struct adm1021_data { | |
| struct i2c_client client; | |
| struct class_device *class_dev; | |
| enum chips type; | |
| struct mutex update_lock; | |
| char valid; /* !=0 if following fields are valid */ | |
| unsigned long last_updated; /* In jiffies */ | |
| u8 temp_max; /* Register values */ | |
| u8 temp_hyst; | |
| u8 temp_input; | |
| u8 remote_temp_max; | |
| u8 remote_temp_hyst; | |
| u8 remote_temp_input; | |
| u8 alarms; | |
| /* Special values for ADM1023 only */ | |
| u8 remote_temp_prec; | |
| u8 remote_temp_os_prec; | |
| u8 remote_temp_hyst_prec; | |
| u8 remote_temp_offset; | |
| u8 remote_temp_offset_prec; | |
| }; | |
| static int adm1021_attach_adapter(struct i2c_adapter *adapter); | |
| static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind); | |
| static void adm1021_init_client(struct i2c_client *client); | |
| static int adm1021_detach_client(struct i2c_client *client); | |
| static int adm1021_read_value(struct i2c_client *client, u8 reg); | |
| static int adm1021_write_value(struct i2c_client *client, u8 reg, | |
| u16 value); | |
| static struct adm1021_data *adm1021_update_device(struct device *dev); | |
| /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ | |
| static int read_only; | |
| /* This is the driver that will be inserted */ | |
| static struct i2c_driver adm1021_driver = { | |
| .driver = { | |
| .name = "adm1021", | |
| }, | |
| .id = I2C_DRIVERID_ADM1021, | |
| .attach_adapter = adm1021_attach_adapter, | |
| .detach_client = adm1021_detach_client, | |
| }; | |
| #define show(value) \ | |
| static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ | |
| { \ | |
| struct adm1021_data *data = adm1021_update_device(dev); \ | |
| return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ | |
| } | |
| show(temp_max); | |
| show(temp_hyst); | |
| show(temp_input); | |
| show(remote_temp_max); | |
| show(remote_temp_hyst); | |
| show(remote_temp_input); | |
| #define show2(value) \ | |
| static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ | |
| { \ | |
| struct adm1021_data *data = adm1021_update_device(dev); \ | |
| return sprintf(buf, "%d\n", data->value); \ | |
| } | |
| show2(alarms); | |
| #define set(value, reg) \ | |
| static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ | |
| { \ | |
| struct i2c_client *client = to_i2c_client(dev); \ | |
| struct adm1021_data *data = i2c_get_clientdata(client); \ | |
| int temp = simple_strtoul(buf, NULL, 10); \ | |
| \ | |
| mutex_lock(&data->update_lock); \ | |
| data->value = TEMP_TO_REG(temp); \ | |
| adm1021_write_value(client, reg, data->value); \ | |
| mutex_unlock(&data->update_lock); \ | |
| return count; \ | |
| } | |
| set(temp_max, ADM1021_REG_TOS_W); | |
| set(temp_hyst, ADM1021_REG_THYST_W); | |
| set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W); | |
| set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W); | |
| static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); | |
| static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst); | |
| static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL); | |
| static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max); | |
| static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst); | |
| static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL); | |
| static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); | |
| static int adm1021_attach_adapter(struct i2c_adapter *adapter) | |
| { | |
| if (!(adapter->class & I2C_CLASS_HWMON)) | |
| return 0; | |
| return i2c_probe(adapter, &addr_data, adm1021_detect); | |
| } | |
| static struct attribute *adm1021_attributes[] = { | |
| &dev_attr_temp1_max.attr, | |
| &dev_attr_temp1_min.attr, | |
| &dev_attr_temp1_input.attr, | |
| &dev_attr_temp2_max.attr, | |
| &dev_attr_temp2_min.attr, | |
| &dev_attr_temp2_input.attr, | |
| &dev_attr_alarms.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group adm1021_group = { | |
| .attrs = adm1021_attributes, | |
| }; | |
| static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) | |
| { | |
| int i; | |
| struct i2c_client *new_client; | |
| struct adm1021_data *data; | |
| int err = 0; | |
| const char *type_name = ""; | |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
| goto error0; | |
| /* OK. For now, we presume we have a valid client. We now create the | |
| client structure, even though we cannot fill it completely yet. | |
| But it allows us to access adm1021_{read,write}_value. */ | |
| if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { | |
| err = -ENOMEM; | |
| goto error0; | |
| } | |
| new_client = &data->client; | |
| i2c_set_clientdata(new_client, data); | |
| new_client->addr = address; | |
| new_client->adapter = adapter; | |
| new_client->driver = &adm1021_driver; | |
| new_client->flags = 0; | |
| /* Now, we do the remaining detection. */ | |
| if (kind < 0) { | |
| if ((adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0x03) != 0x00 | |
| || (adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x3F) != 0x00 | |
| || (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) & 0xF8) != 0x00) { | |
| err = -ENODEV; | |
| goto error1; | |
| } | |
| } | |
| /* Determine the chip type. */ | |
| if (kind <= 0) { | |
| i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID); | |
| if (i == 0x41) | |
| if ((adm1021_read_value(new_client, ADM1021_REG_DEV_ID) & 0x0F0) == 0x030) | |
| kind = adm1023; | |
| else | |
| kind = adm1021; | |
| else if (i == 0x49) | |
| kind = thmc10; | |
| else if (i == 0x23) | |
| kind = gl523sm; | |
| else if ((i == 0x4d) && | |
| (adm1021_read_value(new_client, ADM1021_REG_DEV_ID) == 0x01)) | |
| kind = max1617a; | |
| else if (i == 0x54) | |
| kind = mc1066; | |
| /* LM84 Mfr ID in a different place, and it has more unused bits */ | |
| else if (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) == 0x00 | |
| && (kind == 0 /* skip extra detection */ | |
| || ((adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x7F) == 0x00 | |
| && (adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0xAB) == 0x00))) | |
| kind = lm84; | |
| else | |
| kind = max1617; | |
| } | |
| if (kind == max1617) { | |
| type_name = "max1617"; | |
| } else if (kind == max1617a) { | |
| type_name = "max1617a"; | |
| } else if (kind == adm1021) { | |
| type_name = "adm1021"; | |
| } else if (kind == adm1023) { | |
| type_name = "adm1023"; | |
| } else if (kind == thmc10) { | |
| type_name = "thmc10"; | |
| } else if (kind == lm84) { | |
| type_name = "lm84"; | |
| } else if (kind == gl523sm) { | |
| type_name = "gl523sm"; | |
| } else if (kind == mc1066) { | |
| type_name = "mc1066"; | |
| } | |
| /* Fill in the remaining client fields and put it into the global list */ | |
| strlcpy(new_client->name, type_name, I2C_NAME_SIZE); | |
| data->type = kind; | |
| data->valid = 0; | |
| mutex_init(&data->update_lock); | |
| /* Tell the I2C layer a new client has arrived */ | |
| if ((err = i2c_attach_client(new_client))) | |
| goto error1; | |
| /* Initialize the ADM1021 chip */ | |
| if (kind != lm84) | |
| adm1021_init_client(new_client); | |
| /* Register sysfs hooks */ | |
| if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1021_group))) | |
| goto error2; | |
| data->class_dev = hwmon_device_register(&new_client->dev); | |
| if (IS_ERR(data->class_dev)) { | |
| err = PTR_ERR(data->class_dev); | |
| goto error3; | |
| } | |
| return 0; | |
| error3: | |
| sysfs_remove_group(&new_client->dev.kobj, &adm1021_group); | |
| error2: | |
| i2c_detach_client(new_client); | |
| error1: | |
| kfree(data); | |
| error0: | |
| return err; | |
| } | |
| static void adm1021_init_client(struct i2c_client *client) | |
| { | |
| /* Enable ADC and disable suspend mode */ | |
| adm1021_write_value(client, ADM1021_REG_CONFIG_W, | |
| adm1021_read_value(client, ADM1021_REG_CONFIG_R) & 0xBF); | |
| /* Set Conversion rate to 1/sec (this can be tinkered with) */ | |
| adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04); | |
| } | |
| static int adm1021_detach_client(struct i2c_client *client) | |
| { | |
| struct adm1021_data *data = i2c_get_clientdata(client); | |
| int err; | |
| hwmon_device_unregister(data->class_dev); | |
| sysfs_remove_group(&client->dev.kobj, &adm1021_group); | |
| if ((err = i2c_detach_client(client))) | |
| return err; | |
| kfree(data); | |
| return 0; | |
| } | |
| /* All registers are byte-sized */ | |
| static int adm1021_read_value(struct i2c_client *client, u8 reg) | |
| { | |
| return i2c_smbus_read_byte_data(client, reg); | |
| } | |
| static int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value) | |
| { | |
| if (!read_only) | |
| return i2c_smbus_write_byte_data(client, reg, value); | |
| return 0; | |
| } | |
| static struct adm1021_data *adm1021_update_device(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct adm1021_data *data = i2c_get_clientdata(client); | |
| mutex_lock(&data->update_lock); | |
| if (time_after(jiffies, data->last_updated + HZ + HZ / 2) | |
| || !data->valid) { | |
| dev_dbg(&client->dev, "Starting adm1021 update\n"); | |
| data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP); | |
| data->temp_max = adm1021_read_value(client, ADM1021_REG_TOS_R); | |
| data->temp_hyst = adm1021_read_value(client, ADM1021_REG_THYST_R); | |
| data->remote_temp_input = adm1021_read_value(client, ADM1021_REG_REMOTE_TEMP); | |
| data->remote_temp_max = adm1021_read_value(client, ADM1021_REG_REMOTE_TOS_R); | |
| data->remote_temp_hyst = adm1021_read_value(client, ADM1021_REG_REMOTE_THYST_R); | |
| data->alarms = adm1021_read_value(client, ADM1021_REG_STATUS) & 0x7c; | |
| if (data->type == adm1023) { | |
| data->remote_temp_prec = adm1021_read_value(client, ADM1021_REG_REM_TEMP_PREC); | |
| data->remote_temp_os_prec = adm1021_read_value(client, ADM1021_REG_REM_TOS_PREC); | |
| data->remote_temp_hyst_prec = adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC); | |
| data->remote_temp_offset = adm1021_read_value(client, ADM1021_REG_REM_OFFSET); | |
| data->remote_temp_offset_prec = adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC); | |
| } | |
| data->last_updated = jiffies; | |
| data->valid = 1; | |
| } | |
| mutex_unlock(&data->update_lock); | |
| return data; | |
| } | |
| static int __init sensors_adm1021_init(void) | |
| { | |
| return i2c_add_driver(&adm1021_driver); | |
| } | |
| static void __exit sensors_adm1021_exit(void) | |
| { | |
| i2c_del_driver(&adm1021_driver); | |
| } | |
| MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl> and " | |
| "Philip Edelbrock <phil@netroedge.com>"); | |
| MODULE_DESCRIPTION("adm1021 driver"); | |
| MODULE_LICENSE("GPL"); | |
| module_param(read_only, bool, 0); | |
| MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); | |
| module_init(sensors_adm1021_init) | |
| module_exit(sensors_adm1021_exit) |