| /* | |
| * k8temp.c - Linux kernel module for hardware monitoring | |
| * | |
| * Copyright (C) 2006 Rudolf Marek <r.marek@sh.cvut.cz> | |
| * | |
| * Inspired from the w83785 and amd756 drivers. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | |
| * 02110-1301 USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/pci.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| #define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000) | |
| #define REG_TEMP 0xe4 | |
| #define SEL_PLACE 0x40 | |
| #define SEL_CORE 0x04 | |
| struct k8temp_data { | |
| struct class_device *class_dev; | |
| struct mutex update_lock; | |
| const char *name; | |
| char valid; /* zero until following fields are valid */ | |
| unsigned long last_updated; /* in jiffies */ | |
| /* registers values */ | |
| u8 sensorsp; /* sensor presence bits - SEL_CORE & SEL_PLACE */ | |
| u32 temp[2][2]; /* core, place */ | |
| }; | |
| static struct k8temp_data *k8temp_update_device(struct device *dev) | |
| { | |
| struct k8temp_data *data = dev_get_drvdata(dev); | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| u8 tmp; | |
| mutex_lock(&data->update_lock); | |
| if (!data->valid | |
| || time_after(jiffies, data->last_updated + HZ)) { | |
| pci_read_config_byte(pdev, REG_TEMP, &tmp); | |
| tmp &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */ | |
| pci_write_config_byte(pdev, REG_TEMP, tmp); | |
| pci_read_config_dword(pdev, REG_TEMP, &data->temp[0][0]); | |
| if (data->sensorsp & SEL_PLACE) { | |
| tmp |= SEL_PLACE; /* Select sensor 1, core0 */ | |
| pci_write_config_byte(pdev, REG_TEMP, tmp); | |
| pci_read_config_dword(pdev, REG_TEMP, | |
| &data->temp[0][1]); | |
| } | |
| if (data->sensorsp & SEL_CORE) { | |
| tmp &= ~SEL_PLACE; /* Select sensor 0, core1 */ | |
| tmp |= SEL_CORE; | |
| pci_write_config_byte(pdev, REG_TEMP, tmp); | |
| pci_read_config_dword(pdev, REG_TEMP, | |
| &data->temp[1][0]); | |
| if (data->sensorsp & SEL_PLACE) { | |
| tmp |= SEL_PLACE; /* Select sensor 1, core1 */ | |
| pci_write_config_byte(pdev, REG_TEMP, tmp); | |
| pci_read_config_dword(pdev, REG_TEMP, | |
| &data->temp[1][1]); | |
| } | |
| } | |
| data->last_updated = jiffies; | |
| data->valid = 1; | |
| } | |
| mutex_unlock(&data->update_lock); | |
| return data; | |
| } | |
| /* | |
| * Sysfs stuff | |
| */ | |
| static ssize_t show_name(struct device *dev, struct device_attribute | |
| *devattr, char *buf) | |
| { | |
| struct k8temp_data *data = dev_get_drvdata(dev); | |
| return sprintf(buf, "%s\n", data->name); | |
| } | |
| static ssize_t show_temp(struct device *dev, | |
| struct device_attribute *devattr, char *buf) | |
| { | |
| struct sensor_device_attribute_2 *attr = | |
| to_sensor_dev_attr_2(devattr); | |
| int core = attr->nr; | |
| int place = attr->index; | |
| struct k8temp_data *data = k8temp_update_device(dev); | |
| return sprintf(buf, "%d\n", | |
| TEMP_FROM_REG(data->temp[core][place])); | |
| } | |
| /* core, place */ | |
| static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0); | |
| static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1); | |
| static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 1, 0); | |
| static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 1, 1); | |
| static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); | |
| static struct pci_device_id k8temp_ids[] = { | |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, | |
| { 0 }, | |
| }; | |
| MODULE_DEVICE_TABLE(pci, k8temp_ids); | |
| static int __devinit k8temp_probe(struct pci_dev *pdev, | |
| const struct pci_device_id *id) | |
| { | |
| int err; | |
| u8 scfg; | |
| u32 temp; | |
| struct k8temp_data *data; | |
| u32 cpuid = cpuid_eax(1); | |
| /* this feature should be available since SH-C0 core */ | |
| if ((cpuid == 0xf40) || (cpuid == 0xf50) || (cpuid == 0xf51)) { | |
| err = -ENODEV; | |
| goto exit; | |
| } | |
| if (!(data = kzalloc(sizeof(struct k8temp_data), GFP_KERNEL))) { | |
| err = -ENOMEM; | |
| goto exit; | |
| } | |
| pci_read_config_byte(pdev, REG_TEMP, &scfg); | |
| scfg &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */ | |
| pci_write_config_byte(pdev, REG_TEMP, scfg); | |
| pci_read_config_byte(pdev, REG_TEMP, &scfg); | |
| if (scfg & (SEL_PLACE | SEL_CORE)) { | |
| dev_err(&pdev->dev, "Configuration bit(s) stuck at 1!\n"); | |
| err = -ENODEV; | |
| goto exit_free; | |
| } | |
| scfg |= (SEL_PLACE | SEL_CORE); | |
| pci_write_config_byte(pdev, REG_TEMP, scfg); | |
| /* now we know if we can change core and/or sensor */ | |
| pci_read_config_byte(pdev, REG_TEMP, &data->sensorsp); | |
| if (data->sensorsp & SEL_PLACE) { | |
| scfg &= ~SEL_CORE; /* Select sensor 1, core0 */ | |
| pci_write_config_byte(pdev, REG_TEMP, scfg); | |
| pci_read_config_dword(pdev, REG_TEMP, &temp); | |
| scfg |= SEL_CORE; /* prepare for next selection */ | |
| if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is not likely */ | |
| data->sensorsp &= ~SEL_PLACE; | |
| } | |
| if (data->sensorsp & SEL_CORE) { | |
| scfg &= ~SEL_PLACE; /* Select sensor 0, core1 */ | |
| pci_write_config_byte(pdev, REG_TEMP, scfg); | |
| pci_read_config_dword(pdev, REG_TEMP, &temp); | |
| if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is not likely */ | |
| data->sensorsp &= ~SEL_CORE; | |
| } | |
| data->name = "k8temp"; | |
| mutex_init(&data->update_lock); | |
| dev_set_drvdata(&pdev->dev, data); | |
| /* Register sysfs hooks */ | |
| err = device_create_file(&pdev->dev, | |
| &sensor_dev_attr_temp1_input.dev_attr); | |
| if (err) | |
| goto exit_remove; | |
| /* sensor can be changed and reports something */ | |
| if (data->sensorsp & SEL_PLACE) { | |
| err = device_create_file(&pdev->dev, | |
| &sensor_dev_attr_temp2_input.dev_attr); | |
| if (err) | |
| goto exit_remove; | |
| } | |
| /* core can be changed and reports something */ | |
| if (data->sensorsp & SEL_CORE) { | |
| err = device_create_file(&pdev->dev, | |
| &sensor_dev_attr_temp3_input.dev_attr); | |
| if (err) | |
| goto exit_remove; | |
| if (data->sensorsp & SEL_PLACE) | |
| err = device_create_file(&pdev->dev, | |
| &sensor_dev_attr_temp4_input. | |
| dev_attr); | |
| if (err) | |
| goto exit_remove; | |
| } | |
| err = device_create_file(&pdev->dev, &dev_attr_name); | |
| if (err) | |
| goto exit_remove; | |
| data->class_dev = hwmon_device_register(&pdev->dev); | |
| if (IS_ERR(data->class_dev)) { | |
| err = PTR_ERR(data->class_dev); | |
| goto exit_remove; | |
| } | |
| return 0; | |
| exit_remove: | |
| device_remove_file(&pdev->dev, | |
| &sensor_dev_attr_temp1_input.dev_attr); | |
| device_remove_file(&pdev->dev, | |
| &sensor_dev_attr_temp2_input.dev_attr); | |
| device_remove_file(&pdev->dev, | |
| &sensor_dev_attr_temp3_input.dev_attr); | |
| device_remove_file(&pdev->dev, | |
| &sensor_dev_attr_temp4_input.dev_attr); | |
| device_remove_file(&pdev->dev, &dev_attr_name); | |
| exit_free: | |
| dev_set_drvdata(&pdev->dev, NULL); | |
| kfree(data); | |
| exit: | |
| return err; | |
| } | |
| static void __devexit k8temp_remove(struct pci_dev *pdev) | |
| { | |
| struct k8temp_data *data = dev_get_drvdata(&pdev->dev); | |
| hwmon_device_unregister(data->class_dev); | |
| device_remove_file(&pdev->dev, | |
| &sensor_dev_attr_temp1_input.dev_attr); | |
| device_remove_file(&pdev->dev, | |
| &sensor_dev_attr_temp2_input.dev_attr); | |
| device_remove_file(&pdev->dev, | |
| &sensor_dev_attr_temp3_input.dev_attr); | |
| device_remove_file(&pdev->dev, | |
| &sensor_dev_attr_temp4_input.dev_attr); | |
| device_remove_file(&pdev->dev, &dev_attr_name); | |
| dev_set_drvdata(&pdev->dev, NULL); | |
| kfree(data); | |
| } | |
| static struct pci_driver k8temp_driver = { | |
| .name = "k8temp", | |
| .id_table = k8temp_ids, | |
| .probe = k8temp_probe, | |
| .remove = __devexit_p(k8temp_remove), | |
| }; | |
| static int __init k8temp_init(void) | |
| { | |
| return pci_register_driver(&k8temp_driver); | |
| } | |
| static void __exit k8temp_exit(void) | |
| { | |
| pci_unregister_driver(&k8temp_driver); | |
| } | |
| MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>"); | |
| MODULE_DESCRIPTION("AMD K8 core temperature monitor"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(k8temp_init) | |
| module_exit(k8temp_exit) |