| /* | |
| ------------------------------------------------------------------------- | |
| i2c-adap-ite.c i2c-hw access for the IIC peripheral on the ITE MIPS system | |
| ------------------------------------------------------------------------- | |
| Hai-Pao Fan, MontaVista Software, Inc. | |
| hpfan@mvista.com or source@mvista.com | |
| Copyright 2001 MontaVista Software Inc. | |
| ---------------------------------------------------------------------------- | |
| This file was highly leveraged from i2c-elektor.c, which was created | |
| by Simon G. Vogl and Hans Berglund: | |
| Copyright (C) 1995-97 Simon G. Vogl | |
| 1998-99 Hans Berglund | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ | |
| /* ------------------------------------------------------------------------- */ | |
| /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even | |
| Frodo Looijaard <frodol@dds.nl> */ | |
| #include <linux/kernel.h> | |
| #include <linux/ioport.h> | |
| #include <linux/module.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <linux/init.h> | |
| #include <linux/wait.h> | |
| #include <asm/irq.h> | |
| #include <asm/io.h> | |
| #include <linux/i2c.h> | |
| #include <linux/i2c-algo-ite.h> | |
| #include <linux/i2c-adap-ite.h> | |
| #include "../i2c-ite.h" | |
| #define DEFAULT_BASE 0x14014030 | |
| #define ITE_IIC_IO_SIZE 0x40 | |
| #define DEFAULT_IRQ 0 | |
| #define DEFAULT_CLOCK 0x1b0e /* default 16MHz/(27+14) = 400KHz */ | |
| #define DEFAULT_OWN 0x55 | |
| static int base; | |
| static int irq; | |
| static int clock; | |
| static int own; | |
| static struct iic_ite gpi; | |
| static wait_queue_head_t iic_wait; | |
| static int iic_pending; | |
| static spinlock_t lock; | |
| /* ----- local functions ---------------------------------------------- */ | |
| static void iic_ite_setiic(void *data, int ctl, short val) | |
| { | |
| unsigned long j = jiffies + 10; | |
| pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff); | |
| #ifdef DEBUG | |
| while (time_before(jiffies, j)) | |
| schedule(); | |
| #endif | |
| outw(val,ctl); | |
| } | |
| static short iic_ite_getiic(void *data, int ctl) | |
| { | |
| short val; | |
| val = inw(ctl); | |
| pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff); | |
| return (val); | |
| } | |
| /* Return our slave address. This is the address | |
| * put on the I2C bus when another master on the bus wants to address us | |
| * as a slave | |
| */ | |
| static int iic_ite_getown(void *data) | |
| { | |
| return (gpi.iic_own); | |
| } | |
| static int iic_ite_getclock(void *data) | |
| { | |
| return (gpi.iic_clock); | |
| } | |
| /* Put this process to sleep. We will wake up when the | |
| * IIC controller interrupts. | |
| */ | |
| static void iic_ite_waitforpin(void) { | |
| DEFINE_WAIT(wait); | |
| int timeout = 2; | |
| unsigned long flags; | |
| /* If interrupts are enabled (which they are), then put the process to | |
| * sleep. This process will be awakened by two events -- either the | |
| * the IIC peripheral interrupts or the timeout expires. | |
| * If interrupts are not enabled then delay for a reasonable amount | |
| * of time and return. | |
| */ | |
| if (gpi.iic_irq > 0) { | |
| spin_lock_irqsave(&lock, flags); | |
| if (iic_pending == 0) { | |
| spin_unlock_irqrestore(&lock, flags); | |
| prepare_to_wait(&iic_wait, &wait, TASK_INTERRUPTIBLE); | |
| if (schedule_timeout(timeout*HZ)) { | |
| spin_lock_irqsave(&lock, flags); | |
| if (iic_pending == 1) { | |
| iic_pending = 0; | |
| } | |
| spin_unlock_irqrestore(&lock, flags); | |
| } | |
| finish_wait(&iic_wait, &wait); | |
| } else { | |
| iic_pending = 0; | |
| spin_unlock_irqrestore(&lock, flags); | |
| } | |
| } else { | |
| udelay(100); | |
| } | |
| } | |
| static irqreturn_t iic_ite_handler(int this_irq, void *dev_id) | |
| { | |
| spin_lock(&lock); | |
| iic_pending = 1; | |
| spin_unlock(&lock); | |
| wake_up_interruptible(&iic_wait); | |
| return IRQ_HANDLED; | |
| } | |
| /* Lock the region of memory where I/O registers exist. Request our | |
| * interrupt line and register its associated handler. | |
| */ | |
| static int iic_hw_resrc_init(void) | |
| { | |
| if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c")) | |
| return -ENODEV; | |
| if (gpi.iic_irq <= 0) | |
| return 0; | |
| if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0) | |
| gpi.iic_irq = 0; | |
| else | |
| enable_irq(gpi.iic_irq); | |
| return 0; | |
| } | |
| static void iic_ite_release(void) | |
| { | |
| if (gpi.iic_irq > 0) { | |
| disable_irq(gpi.iic_irq); | |
| free_irq(gpi.iic_irq, 0); | |
| } | |
| release_region(gpi.iic_base , 2); | |
| } | |
| /* ------------------------------------------------------------------------ | |
| * Encapsulate the above functions in the correct operations structure. | |
| * This is only done when more than one hardware adapter is supported. | |
| */ | |
| static struct i2c_algo_iic_data iic_ite_data = { | |
| NULL, | |
| iic_ite_setiic, | |
| iic_ite_getiic, | |
| iic_ite_getown, | |
| iic_ite_getclock, | |
| iic_ite_waitforpin, | |
| 80, 80, 100, /* waits, timeout */ | |
| }; | |
| static struct i2c_adapter iic_ite_ops = { | |
| .owner = THIS_MODULE, | |
| .id = I2C_HW_I_IIC, | |
| .algo_data = &iic_ite_data, | |
| .name = "ITE IIC adapter", | |
| }; | |
| /* Called when the module is loaded. This function starts the | |
| * cascade of calls up through the hierarchy of i2c modules (i.e. up to the | |
| * algorithm layer and into to the core layer) | |
| */ | |
| static int __init iic_ite_init(void) | |
| { | |
| struct iic_ite *piic = &gpi; | |
| printk(KERN_INFO "Initialize ITE IIC adapter module\n"); | |
| if (base == 0) | |
| piic->iic_base = DEFAULT_BASE; | |
| else | |
| piic->iic_base = base; | |
| if (irq == 0) | |
| piic->iic_irq = DEFAULT_IRQ; | |
| else | |
| piic->iic_irq = irq; | |
| if (clock == 0) | |
| piic->iic_clock = DEFAULT_CLOCK; | |
| else | |
| piic->iic_clock = clock; | |
| if (own == 0) | |
| piic->iic_own = DEFAULT_OWN; | |
| else | |
| piic->iic_own = own; | |
| iic_ite_data.data = (void *)piic; | |
| init_waitqueue_head(&iic_wait); | |
| spin_lock_init(&lock); | |
| if (iic_hw_resrc_init() == 0) { | |
| if (i2c_iic_add_bus(&iic_ite_ops) < 0) | |
| return -ENODEV; | |
| } else { | |
| return -ENODEV; | |
| } | |
| printk(KERN_INFO " found device at %#x irq %d.\n", | |
| piic->iic_base, piic->iic_irq); | |
| return 0; | |
| } | |
| static void iic_ite_exit(void) | |
| { | |
| i2c_iic_del_bus(&iic_ite_ops); | |
| iic_ite_release(); | |
| } | |
| /* If modules is NOT defined when this file is compiled, then the MODULE_* | |
| * macros will resolve to nothing | |
| */ | |
| MODULE_AUTHOR("MontaVista Software <www.mvista.com>"); | |
| MODULE_DESCRIPTION("I2C-Bus adapter routines for ITE IIC bus adapter"); | |
| MODULE_LICENSE("GPL"); | |
| module_param(base, int, 0); | |
| module_param(irq, int, 0); | |
| module_param(clock, int, 0); | |
| module_param(own, int, 0); | |
| /* Called when module is loaded or when kernel is initialized. | |
| * If MODULES is defined when this file is compiled, then this function will | |
| * resolve to init_module (the function called when insmod is invoked for a | |
| * module). Otherwise, this function is called early in the boot, when the | |
| * kernel is intialized. Check out /include/init.h to see how this works. | |
| */ | |
| module_init(iic_ite_init); | |
| /* Resolves to module_cleanup when MODULES is defined. */ | |
| module_exit(iic_ite_exit); |