| /* | |
| * (C) Copyright 2003-2004 | |
| * Humboldt Solutions Ltd, adrian@humboldt.co.uk. | |
| * This is a combined i2c adapter and algorithm driver for the | |
| * MPC107/Tsi107 PowerPC northbridge and processors that include | |
| * the same I2C unit (8240, 8245, 85xx). | |
| * | |
| * Release 0.8 | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/sched.h> | |
| #include <linux/init.h> | |
| #include <linux/pci.h> | |
| #include <linux/platform_device.h> | |
| #include <asm/io.h> | |
| #include <linux/fsl_devices.h> | |
| #include <linux/i2c.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/delay.h> | |
| #define MPC_I2C_ADDR 0x00 | |
| #define MPC_I2C_FDR 0x04 | |
| #define MPC_I2C_CR 0x08 | |
| #define MPC_I2C_SR 0x0c | |
| #define MPC_I2C_DR 0x10 | |
| #define MPC_I2C_DFSRR 0x14 | |
| #define MPC_I2C_REGION 0x20 | |
| #define CCR_MEN 0x80 | |
| #define CCR_MIEN 0x40 | |
| #define CCR_MSTA 0x20 | |
| #define CCR_MTX 0x10 | |
| #define CCR_TXAK 0x08 | |
| #define CCR_RSTA 0x04 | |
| #define CSR_MCF 0x80 | |
| #define CSR_MAAS 0x40 | |
| #define CSR_MBB 0x20 | |
| #define CSR_MAL 0x10 | |
| #define CSR_SRW 0x04 | |
| #define CSR_MIF 0x02 | |
| #define CSR_RXAK 0x01 | |
| struct mpc_i2c { | |
| void __iomem *base; | |
| u32 interrupt; | |
| wait_queue_head_t queue; | |
| struct i2c_adapter adap; | |
| int irq; | |
| u32 flags; | |
| }; | |
| static __inline__ void writeccr(struct mpc_i2c *i2c, u32 x) | |
| { | |
| writeb(x, i2c->base + MPC_I2C_CR); | |
| } | |
| static irqreturn_t mpc_i2c_isr(int irq, void *dev_id) | |
| { | |
| struct mpc_i2c *i2c = dev_id; | |
| if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) { | |
| /* Read again to allow register to stabilise */ | |
| i2c->interrupt = readb(i2c->base + MPC_I2C_SR); | |
| writeb(0, i2c->base + MPC_I2C_SR); | |
| wake_up_interruptible(&i2c->queue); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) | |
| { | |
| unsigned long orig_jiffies = jiffies; | |
| u32 x; | |
| int result = 0; | |
| if (i2c->irq == 0) | |
| { | |
| while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) { | |
| schedule(); | |
| if (time_after(jiffies, orig_jiffies + timeout)) { | |
| pr_debug("I2C: timeout\n"); | |
| result = -EIO; | |
| break; | |
| } | |
| } | |
| x = readb(i2c->base + MPC_I2C_SR); | |
| writeb(0, i2c->base + MPC_I2C_SR); | |
| } else { | |
| /* Interrupt mode */ | |
| result = wait_event_interruptible_timeout(i2c->queue, | |
| (i2c->interrupt & CSR_MIF), timeout * HZ); | |
| if (unlikely(result < 0)) | |
| pr_debug("I2C: wait interrupted\n"); | |
| else if (unlikely(!(i2c->interrupt & CSR_MIF))) { | |
| pr_debug("I2C: wait timeout\n"); | |
| result = -ETIMEDOUT; | |
| } | |
| x = i2c->interrupt; | |
| i2c->interrupt = 0; | |
| } | |
| if (result < 0) | |
| return result; | |
| if (!(x & CSR_MCF)) { | |
| pr_debug("I2C: unfinished\n"); | |
| return -EIO; | |
| } | |
| if (x & CSR_MAL) { | |
| pr_debug("I2C: MAL\n"); | |
| return -EIO; | |
| } | |
| if (writing && (x & CSR_RXAK)) { | |
| pr_debug("I2C: No RXAK\n"); | |
| /* generate stop */ | |
| writeccr(i2c, CCR_MEN); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static void mpc_i2c_setclock(struct mpc_i2c *i2c) | |
| { | |
| /* Set clock and filters */ | |
| if (i2c->flags & FSL_I2C_DEV_SEPARATE_DFSRR) { | |
| writeb(0x31, i2c->base + MPC_I2C_FDR); | |
| writeb(0x10, i2c->base + MPC_I2C_DFSRR); | |
| } else if (i2c->flags & FSL_I2C_DEV_CLOCK_5200) | |
| writeb(0x3f, i2c->base + MPC_I2C_FDR); | |
| else | |
| writel(0x1031, i2c->base + MPC_I2C_FDR); | |
| } | |
| static void mpc_i2c_start(struct mpc_i2c *i2c) | |
| { | |
| /* Clear arbitration */ | |
| writeb(0, i2c->base + MPC_I2C_SR); | |
| /* Start with MEN */ | |
| writeccr(i2c, CCR_MEN); | |
| } | |
| static void mpc_i2c_stop(struct mpc_i2c *i2c) | |
| { | |
| writeccr(i2c, CCR_MEN); | |
| } | |
| static int mpc_write(struct mpc_i2c *i2c, int target, | |
| const u8 * data, int length, int restart) | |
| { | |
| int i; | |
| unsigned timeout = i2c->adap.timeout; | |
| u32 flags = restart ? CCR_RSTA : 0; | |
| /* Start with MEN */ | |
| if (!restart) | |
| writeccr(i2c, CCR_MEN); | |
| /* Start as master */ | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); | |
| /* Write target byte */ | |
| writeb((target << 1), i2c->base + MPC_I2C_DR); | |
| if (i2c_wait(i2c, timeout, 1) < 0) | |
| return -1; | |
| for (i = 0; i < length; i++) { | |
| /* Write data byte */ | |
| writeb(data[i], i2c->base + MPC_I2C_DR); | |
| if (i2c_wait(i2c, timeout, 1) < 0) | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static int mpc_read(struct mpc_i2c *i2c, int target, | |
| u8 * data, int length, int restart) | |
| { | |
| unsigned timeout = i2c->adap.timeout; | |
| int i; | |
| u32 flags = restart ? CCR_RSTA : 0; | |
| /* Start with MEN */ | |
| if (!restart) | |
| writeccr(i2c, CCR_MEN); | |
| /* Switch to read - restart */ | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); | |
| /* Write target address byte - this time with the read flag set */ | |
| writeb((target << 1) | 1, i2c->base + MPC_I2C_DR); | |
| if (i2c_wait(i2c, timeout, 1) < 0) | |
| return -1; | |
| if (length) { | |
| if (length == 1) | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); | |
| else | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA); | |
| /* Dummy read */ | |
| readb(i2c->base + MPC_I2C_DR); | |
| } | |
| for (i = 0; i < length; i++) { | |
| if (i2c_wait(i2c, timeout, 0) < 0) | |
| return -1; | |
| /* Generate txack on next to last byte */ | |
| if (i == length - 2) | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); | |
| /* Generate stop on last byte */ | |
| if (i == length - 1) | |
| writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK); | |
| data[i] = readb(i2c->base + MPC_I2C_DR); | |
| } | |
| return length; | |
| } | |
| static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) | |
| { | |
| struct i2c_msg *pmsg; | |
| int i; | |
| int ret = 0; | |
| unsigned long orig_jiffies = jiffies; | |
| struct mpc_i2c *i2c = i2c_get_adapdata(adap); | |
| mpc_i2c_start(i2c); | |
| /* Allow bus up to 1s to become not busy */ | |
| while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { | |
| if (signal_pending(current)) { | |
| pr_debug("I2C: Interrupted\n"); | |
| return -EINTR; | |
| } | |
| if (time_after(jiffies, orig_jiffies + HZ)) { | |
| pr_debug("I2C: timeout\n"); | |
| return -EIO; | |
| } | |
| schedule(); | |
| } | |
| for (i = 0; ret >= 0 && i < num; i++) { | |
| pmsg = &msgs[i]; | |
| pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n", | |
| pmsg->flags & I2C_M_RD ? "read" : "write", | |
| pmsg->len, pmsg->addr, i + 1, num); | |
| if (pmsg->flags & I2C_M_RD) | |
| ret = | |
| mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); | |
| else | |
| ret = | |
| mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); | |
| } | |
| mpc_i2c_stop(i2c); | |
| return (ret < 0) ? ret : num; | |
| } | |
| static u32 mpc_functionality(struct i2c_adapter *adap) | |
| { | |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | |
| } | |
| static const struct i2c_algorithm mpc_algo = { | |
| .master_xfer = mpc_xfer, | |
| .functionality = mpc_functionality, | |
| }; | |
| static struct i2c_adapter mpc_ops = { | |
| .owner = THIS_MODULE, | |
| .name = "MPC adapter", | |
| .id = I2C_HW_MPC107, | |
| .algo = &mpc_algo, | |
| .class = I2C_CLASS_HWMON, | |
| .timeout = 1, | |
| .retries = 1 | |
| }; | |
| static int fsl_i2c_probe(struct platform_device *pdev) | |
| { | |
| int result = 0; | |
| struct mpc_i2c *i2c; | |
| struct fsl_i2c_platform_data *pdata; | |
| struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data; | |
| if (!(i2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) { | |
| return -ENOMEM; | |
| } | |
| i2c->irq = platform_get_irq(pdev, 0); | |
| if (i2c->irq < 0) { | |
| result = -ENXIO; | |
| goto fail_get_irq; | |
| } | |
| i2c->flags = pdata->device_flags; | |
| init_waitqueue_head(&i2c->queue); | |
| i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION); | |
| if (!i2c->base) { | |
| printk(KERN_ERR "i2c-mpc - failed to map controller\n"); | |
| result = -ENOMEM; | |
| goto fail_map; | |
| } | |
| if (i2c->irq != 0) | |
| if ((result = request_irq(i2c->irq, mpc_i2c_isr, | |
| IRQF_SHARED, "i2c-mpc", i2c)) < 0) { | |
| printk(KERN_ERR | |
| "i2c-mpc - failed to attach interrupt\n"); | |
| goto fail_irq; | |
| } | |
| mpc_i2c_setclock(i2c); | |
| platform_set_drvdata(pdev, i2c); | |
| i2c->adap = mpc_ops; | |
| i2c_set_adapdata(&i2c->adap, i2c); | |
| i2c->adap.dev.parent = &pdev->dev; | |
| if ((result = i2c_add_adapter(&i2c->adap)) < 0) { | |
| printk(KERN_ERR "i2c-mpc - failed to add adapter\n"); | |
| goto fail_add; | |
| } | |
| return result; | |
| fail_add: | |
| if (i2c->irq != 0) | |
| free_irq(i2c->irq, NULL); | |
| fail_irq: | |
| iounmap(i2c->base); | |
| fail_map: | |
| fail_get_irq: | |
| kfree(i2c); | |
| return result; | |
| }; | |
| static int fsl_i2c_remove(struct platform_device *pdev) | |
| { | |
| struct mpc_i2c *i2c = platform_get_drvdata(pdev); | |
| i2c_del_adapter(&i2c->adap); | |
| platform_set_drvdata(pdev, NULL); | |
| if (i2c->irq != 0) | |
| free_irq(i2c->irq, i2c); | |
| iounmap(i2c->base); | |
| kfree(i2c); | |
| return 0; | |
| }; | |
| /* Structure for a device driver */ | |
| static struct platform_driver fsl_i2c_driver = { | |
| .probe = fsl_i2c_probe, | |
| .remove = fsl_i2c_remove, | |
| .driver = { | |
| .owner = THIS_MODULE, | |
| .name = "fsl-i2c", | |
| }, | |
| }; | |
| static int __init fsl_i2c_init(void) | |
| { | |
| return platform_driver_register(&fsl_i2c_driver); | |
| } | |
| static void __exit fsl_i2c_exit(void) | |
| { | |
| platform_driver_unregister(&fsl_i2c_driver); | |
| } | |
| module_init(fsl_i2c_init); | |
| module_exit(fsl_i2c_exit); | |
| MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); | |
| MODULE_DESCRIPTION | |
| ("I2C-Bus adapter for MPC107 bridge and MPC824x/85xx/52xx processors"); | |
| MODULE_LICENSE("GPL"); |