| /* | |
| i2c Support for Apple SMU Controller | |
| Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp. | |
| <benh@kernel.crashing.org> | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/i2c.h> | |
| #include <linux/init.h> | |
| #include <linux/completion.h> | |
| #include <linux/device.h> | |
| #include <linux/platform_device.h> | |
| #include <asm/prom.h> | |
| #include <asm/pmac_low_i2c.h> | |
| MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); | |
| MODULE_DESCRIPTION("I2C driver for Apple PowerMac"); | |
| MODULE_LICENSE("GPL"); | |
| /* | |
| * SMBUS-type transfer entrypoint | |
| */ | |
| static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap, | |
| u16 addr, | |
| unsigned short flags, | |
| char read_write, | |
| u8 command, | |
| int size, | |
| union i2c_smbus_data* data) | |
| { | |
| struct pmac_i2c_bus *bus = i2c_get_adapdata(adap); | |
| int rc = 0; | |
| int read = (read_write == I2C_SMBUS_READ); | |
| int addrdir = (addr << 1) | read; | |
| u8 local[2]; | |
| rc = pmac_i2c_open(bus, 0); | |
| if (rc) | |
| return rc; | |
| switch (size) { | |
| case I2C_SMBUS_QUICK: | |
| rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std); | |
| if (rc) | |
| goto bail; | |
| rc = pmac_i2c_xfer(bus, addrdir, 0, 0, NULL, 0); | |
| break; | |
| case I2C_SMBUS_BYTE: | |
| rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std); | |
| if (rc) | |
| goto bail; | |
| rc = pmac_i2c_xfer(bus, addrdir, 0, 0, &data->byte, 1); | |
| break; | |
| case I2C_SMBUS_BYTE_DATA: | |
| rc = pmac_i2c_setmode(bus, read ? | |
| pmac_i2c_mode_combined : | |
| pmac_i2c_mode_stdsub); | |
| if (rc) | |
| goto bail; | |
| rc = pmac_i2c_xfer(bus, addrdir, 1, command, &data->byte, 1); | |
| break; | |
| case I2C_SMBUS_WORD_DATA: | |
| rc = pmac_i2c_setmode(bus, read ? | |
| pmac_i2c_mode_combined : | |
| pmac_i2c_mode_stdsub); | |
| if (rc) | |
| goto bail; | |
| if (!read) { | |
| local[0] = data->word & 0xff; | |
| local[1] = (data->word >> 8) & 0xff; | |
| } | |
| rc = pmac_i2c_xfer(bus, addrdir, 1, command, local, 2); | |
| if (rc == 0 && read) { | |
| data->word = ((u16)local[1]) << 8; | |
| data->word |= local[0]; | |
| } | |
| break; | |
| /* Note that these are broken vs. the expected smbus API where | |
| * on reads, the lenght is actually returned from the function, | |
| * but I think the current API makes no sense and I don't want | |
| * any driver that I haven't verified for correctness to go | |
| * anywhere near a pmac i2c bus anyway ... | |
| * | |
| * I'm also not completely sure what kind of phases to do between | |
| * the actual command and the data (what I am _supposed_ to do that | |
| * is). For now, I assume writes are a single stream and reads have | |
| * a repeat start/addr phase (but not stop in between) | |
| */ | |
| case I2C_SMBUS_BLOCK_DATA: | |
| rc = pmac_i2c_setmode(bus, read ? | |
| pmac_i2c_mode_combined : | |
| pmac_i2c_mode_stdsub); | |
| if (rc) | |
| goto bail; | |
| rc = pmac_i2c_xfer(bus, addrdir, 1, command, data->block, | |
| data->block[0] + 1); | |
| break; | |
| case I2C_SMBUS_I2C_BLOCK_DATA: | |
| rc = pmac_i2c_setmode(bus, read ? | |
| pmac_i2c_mode_combined : | |
| pmac_i2c_mode_stdsub); | |
| if (rc) | |
| goto bail; | |
| rc = pmac_i2c_xfer(bus, addrdir, 1, command, | |
| read ? data->block : &data->block[1], | |
| data->block[0]); | |
| break; | |
| default: | |
| rc = -EINVAL; | |
| } | |
| bail: | |
| pmac_i2c_close(bus); | |
| return rc; | |
| } | |
| /* | |
| * Generic i2c master transfer entrypoint. This driver only support single | |
| * messages (for "lame i2c" transfers). Anything else should use the smbus | |
| * entry point | |
| */ | |
| static int i2c_powermac_master_xfer( struct i2c_adapter *adap, | |
| struct i2c_msg *msgs, | |
| int num) | |
| { | |
| struct pmac_i2c_bus *bus = i2c_get_adapdata(adap); | |
| int rc = 0; | |
| int read; | |
| int addrdir; | |
| if (msgs->flags & I2C_M_TEN) | |
| return -EINVAL; | |
| read = (msgs->flags & I2C_M_RD) != 0; | |
| addrdir = (msgs->addr << 1) | read; | |
| if (msgs->flags & I2C_M_REV_DIR_ADDR) | |
| addrdir ^= 1; | |
| rc = pmac_i2c_open(bus, 0); | |
| if (rc) | |
| return rc; | |
| rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std); | |
| if (rc) | |
| goto bail; | |
| rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len); | |
| bail: | |
| pmac_i2c_close(bus); | |
| return rc < 0 ? rc : 1; | |
| } | |
| static u32 i2c_powermac_func(struct i2c_adapter * adapter) | |
| { | |
| return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | | |
| I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | | |
| I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_I2C; | |
| } | |
| /* For now, we only handle smbus */ | |
| static const struct i2c_algorithm i2c_powermac_algorithm = { | |
| .smbus_xfer = i2c_powermac_smbus_xfer, | |
| .master_xfer = i2c_powermac_master_xfer, | |
| .functionality = i2c_powermac_func, | |
| }; | |
| static int i2c_powermac_remove(struct platform_device *dev) | |
| { | |
| struct i2c_adapter *adapter = platform_get_drvdata(dev); | |
| struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter); | |
| int rc; | |
| rc = i2c_del_adapter(adapter); | |
| pmac_i2c_detach_adapter(bus, adapter); | |
| i2c_set_adapdata(adapter, NULL); | |
| /* We aren't that prepared to deal with this... */ | |
| if (rc) | |
| printk("i2c-powermac.c: Failed to remove bus %s !\n", | |
| adapter->name); | |
| platform_set_drvdata(dev, NULL); | |
| kfree(adapter); | |
| return 0; | |
| } | |
| static int __devexit i2c_powermac_probe(struct platform_device *dev) | |
| { | |
| struct pmac_i2c_bus *bus = dev->dev.platform_data; | |
| struct device_node *parent = NULL; | |
| struct i2c_adapter *adapter; | |
| char name[32]; | |
| const char *basename; | |
| int rc; | |
| if (bus == NULL) | |
| return -EINVAL; | |
| /* Ok, now we need to make up a name for the interface that will | |
| * match what we used to do in the past, that is basically the | |
| * controller's parent device node for keywest. PMU didn't have a | |
| * naming convention and SMU has a different one | |
| */ | |
| switch(pmac_i2c_get_type(bus)) { | |
| case pmac_i2c_bus_keywest: | |
| parent = of_get_parent(pmac_i2c_get_controller(bus)); | |
| if (parent == NULL) | |
| return -EINVAL; | |
| basename = parent->name; | |
| break; | |
| case pmac_i2c_bus_pmu: | |
| basename = "pmu"; | |
| break; | |
| case pmac_i2c_bus_smu: | |
| /* This is not what we used to do but I'm fixing drivers at | |
| * the same time as this change | |
| */ | |
| basename = "smu"; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| snprintf(name, 32, "%s %d", basename, pmac_i2c_get_channel(bus)); | |
| of_node_put(parent); | |
| adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); | |
| if (adapter == NULL) { | |
| printk(KERN_ERR "i2c-powermac: can't allocate inteface !\n"); | |
| return -ENOMEM; | |
| } | |
| platform_set_drvdata(dev, adapter); | |
| strcpy(adapter->name, name); | |
| adapter->algo = &i2c_powermac_algorithm; | |
| i2c_set_adapdata(adapter, bus); | |
| adapter->dev.parent = &dev->dev; | |
| pmac_i2c_attach_adapter(bus, adapter); | |
| rc = i2c_add_adapter(adapter); | |
| if (rc) { | |
| printk(KERN_ERR "i2c-powermac: Adapter %s registration " | |
| "failed\n", name); | |
| i2c_set_adapdata(adapter, NULL); | |
| pmac_i2c_detach_adapter(bus, adapter); | |
| } | |
| printk(KERN_INFO "PowerMac i2c bus %s registered\n", name); | |
| return rc; | |
| } | |
| static struct platform_driver i2c_powermac_driver = { | |
| .probe = i2c_powermac_probe, | |
| .remove = __devexit_p(i2c_powermac_remove), | |
| .driver = { | |
| .name = "i2c-powermac", | |
| .bus = &platform_bus_type, | |
| }, | |
| }; | |
| static int __init i2c_powermac_init(void) | |
| { | |
| platform_driver_register(&i2c_powermac_driver); | |
| return 0; | |
| } | |
| static void __exit i2c_powermac_cleanup(void) | |
| { | |
| platform_driver_unregister(&i2c_powermac_driver); | |
| } | |
| module_init(i2c_powermac_init); | |
| module_exit(i2c_powermac_cleanup); |