| /* | |
| * triflex.c | |
| * | |
| * IDE Chipset driver for the Compaq TriFlex IDE controller. | |
| * | |
| * Known to work with the Compaq Workstation 5x00 series. | |
| * | |
| * Copyright (C) 2002 Hewlett-Packard Development Group, L.P. | |
| * Author: Torben Mathiasen <torben.mathiasen@hp.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| * Loosely based on the piix & svwks drivers. | |
| * | |
| * Documentation: | |
| * Not publically available. | |
| */ | |
| #include <linux/types.h> | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/delay.h> | |
| #include <linux/timer.h> | |
| #include <linux/mm.h> | |
| #include <linux/ioport.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/hdreg.h> | |
| #include <linux/pci.h> | |
| #include <linux/ide.h> | |
| #include <linux/init.h> | |
| static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed) | |
| { | |
| ide_hwif_t *hwif = HWIF(drive); | |
| struct pci_dev *dev = hwif->pci_dev; | |
| u8 channel_offset = hwif->channel ? 0x74 : 0x70; | |
| u16 timing = 0; | |
| u32 triflex_timings = 0; | |
| u8 unit = (drive->select.b.unit & 0x01); | |
| u8 speed = ide_rate_filter(0, xferspeed); | |
| pci_read_config_dword(dev, channel_offset, &triflex_timings); | |
| switch(speed) { | |
| case XFER_MW_DMA_2: | |
| timing = 0x0103; | |
| break; | |
| case XFER_MW_DMA_1: | |
| timing = 0x0203; | |
| break; | |
| case XFER_MW_DMA_0: | |
| timing = 0x0808; | |
| break; | |
| case XFER_SW_DMA_2: | |
| case XFER_SW_DMA_1: | |
| case XFER_SW_DMA_0: | |
| timing = 0x0f0f; | |
| break; | |
| case XFER_PIO_4: | |
| timing = 0x0202; | |
| break; | |
| case XFER_PIO_3: | |
| timing = 0x0204; | |
| break; | |
| case XFER_PIO_2: | |
| timing = 0x0404; | |
| break; | |
| case XFER_PIO_1: | |
| timing = 0x0508; | |
| break; | |
| case XFER_PIO_0: | |
| timing = 0x0808; | |
| break; | |
| default: | |
| return -1; | |
| } | |
| triflex_timings &= ~(0xFFFF << (16 * unit)); | |
| triflex_timings |= (timing << (16 * unit)); | |
| pci_write_config_dword(dev, channel_offset, triflex_timings); | |
| return (ide_config_drive_speed(drive, speed)); | |
| } | |
| static void triflex_tune_drive(ide_drive_t *drive, u8 pio) | |
| { | |
| int use_pio = ide_get_best_pio_mode(drive, pio, 4, NULL); | |
| (void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio)); | |
| } | |
| static int triflex_config_drive_for_dma(ide_drive_t *drive) | |
| { | |
| int speed = ide_dma_speed(drive, 0); /* No ultra speeds */ | |
| if (!speed) { | |
| u8 pspeed = ide_get_best_pio_mode(drive, 255, 4, NULL); | |
| speed = XFER_PIO_0 + pspeed; | |
| } | |
| (void) triflex_tune_chipset(drive, speed); | |
| return ide_dma_enable(drive); | |
| } | |
| static int triflex_config_drive_xfer_rate(ide_drive_t *drive) | |
| { | |
| ide_hwif_t *hwif = HWIF(drive); | |
| struct hd_driveid *id = drive->id; | |
| if ((id->capability & 1) && drive->autodma) { | |
| if (ide_use_dma(drive)) { | |
| if (triflex_config_drive_for_dma(drive)) | |
| return hwif->ide_dma_on(drive); | |
| } | |
| } | |
| hwif->tuneproc(drive, 255); | |
| return hwif->ide_dma_off_quietly(drive); | |
| } | |
| static void __devinit init_hwif_triflex(ide_hwif_t *hwif) | |
| { | |
| hwif->tuneproc = &triflex_tune_drive; | |
| hwif->speedproc = &triflex_tune_chipset; | |
| hwif->atapi_dma = 1; | |
| hwif->mwdma_mask = 0x07; | |
| hwif->swdma_mask = 0x07; | |
| hwif->ide_dma_check = &triflex_config_drive_xfer_rate; | |
| if (!noautodma) | |
| hwif->autodma = 1; | |
| hwif->drives[0].autodma = hwif->autodma; | |
| hwif->drives[1].autodma = hwif->autodma; | |
| } | |
| static ide_pci_device_t triflex_device __devinitdata = { | |
| .name = "TRIFLEX", | |
| .init_hwif = init_hwif_triflex, | |
| .channels = 2, | |
| .autodma = AUTODMA, | |
| .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}}, | |
| .bootable = ON_BOARD, | |
| }; | |
| static int __devinit triflex_init_one(struct pci_dev *dev, | |
| const struct pci_device_id *id) | |
| { | |
| return ide_setup_pci_device(dev, &triflex_device); | |
| } | |
| static struct pci_device_id triflex_pci_tbl[] = { | |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE, | |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, | |
| { 0, }, | |
| }; | |
| MODULE_DEVICE_TABLE(pci, triflex_pci_tbl); | |
| static struct pci_driver driver = { | |
| .name = "TRIFLEX_IDE", | |
| .id_table = triflex_pci_tbl, | |
| .probe = triflex_init_one, | |
| }; | |
| static int triflex_ide_init(void) | |
| { | |
| return ide_pci_register_driver(&driver); | |
| } | |
| module_init(triflex_ide_init); | |
| MODULE_AUTHOR("Torben Mathiasen"); | |
| MODULE_DESCRIPTION("PCI driver module for Compaq Triflex IDE"); | |
| MODULE_LICENSE("GPL"); | |