| /* | |
| * Node information (ConfigROM) collection and management. | |
| * | |
| * Copyright (C) 2000 Andreas E. Bombe | |
| * 2001-2003 Ben Collins <bcollins@debian.net> | |
| * | |
| * This code is licensed under the GPL. See the file COPYING in the root | |
| * directory of the kernel sources for details. | |
| */ | |
| #include <linux/bitmap.h> | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/kthread.h> | |
| #include <linux/moduleparam.h> | |
| #include <asm/atomic.h> | |
| #include "csr.h" | |
| #include "highlevel.h" | |
| #include "hosts.h" | |
| #include "ieee1394.h" | |
| #include "ieee1394_core.h" | |
| #include "ieee1394_hotplug.h" | |
| #include "ieee1394_types.h" | |
| #include "ieee1394_transactions.h" | |
| #include "nodemgr.h" | |
| static int ignore_drivers; | |
| module_param(ignore_drivers, int, S_IRUGO | S_IWUSR); | |
| MODULE_PARM_DESC(ignore_drivers, "Disable automatic probing for drivers."); | |
| struct nodemgr_csr_info { | |
| struct hpsb_host *host; | |
| nodeid_t nodeid; | |
| unsigned int generation; | |
| unsigned int speed_unverified:1; | |
| }; | |
| static char *nodemgr_find_oui_name(int oui) | |
| { | |
| #ifdef CONFIG_IEEE1394_OUI_DB | |
| extern struct oui_list_struct { | |
| int oui; | |
| char *name; | |
| } oui_list[]; | |
| int i; | |
| for (i = 0; oui_list[i].name; i++) | |
| if (oui_list[i].oui == oui) | |
| return oui_list[i].name; | |
| #endif | |
| return NULL; | |
| } | |
| /* | |
| * Correct the speed map entry. This is necessary | |
| * - for nodes with link speed < phy speed, | |
| * - for 1394b nodes with negotiated phy port speed < IEEE1394_SPEED_MAX. | |
| * A possible speed is determined by trial and error, using quadlet reads. | |
| */ | |
| static int nodemgr_check_speed(struct nodemgr_csr_info *ci, u64 addr, | |
| quadlet_t *buffer) | |
| { | |
| quadlet_t q; | |
| u8 i, *speed, old_speed, good_speed; | |
| int ret; | |
| speed = &(ci->host->speed[NODEID_TO_NODE(ci->nodeid)]); | |
| old_speed = *speed; | |
| good_speed = IEEE1394_SPEED_MAX + 1; | |
| /* Try every speed from S100 to old_speed. | |
| * If we did it the other way around, a too low speed could be caught | |
| * if the retry succeeded for some other reason, e.g. because the link | |
| * just finished its initialization. */ | |
| for (i = IEEE1394_SPEED_100; i <= old_speed; i++) { | |
| *speed = i; | |
| ret = hpsb_read(ci->host, ci->nodeid, ci->generation, addr, | |
| &q, sizeof(quadlet_t)); | |
| if (ret) | |
| break; | |
| *buffer = q; | |
| good_speed = i; | |
| } | |
| if (good_speed <= IEEE1394_SPEED_MAX) { | |
| HPSB_DEBUG("Speed probe of node " NODE_BUS_FMT " yields %s", | |
| NODE_BUS_ARGS(ci->host, ci->nodeid), | |
| hpsb_speedto_str[good_speed]); | |
| *speed = good_speed; | |
| ci->speed_unverified = 0; | |
| return 0; | |
| } | |
| *speed = old_speed; | |
| return ret; | |
| } | |
| static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length, | |
| void *buffer, void *__ci) | |
| { | |
| struct nodemgr_csr_info *ci = (struct nodemgr_csr_info*)__ci; | |
| int i, ret; | |
| for (i = 1; ; i++) { | |
| ret = hpsb_read(ci->host, ci->nodeid, ci->generation, addr, | |
| buffer, length); | |
| if (!ret) { | |
| ci->speed_unverified = 0; | |
| break; | |
| } | |
| /* Give up after 3rd failure. */ | |
| if (i == 3) | |
| break; | |
| /* The ieee1394_core guessed the node's speed capability from | |
| * the self ID. Check whether a lower speed works. */ | |
| if (ci->speed_unverified && length == sizeof(quadlet_t)) { | |
| ret = nodemgr_check_speed(ci, addr, buffer); | |
| if (!ret) | |
| break; | |
| } | |
| if (msleep_interruptible(334)) | |
| return -EINTR; | |
| } | |
| return ret; | |
| } | |
| static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci) | |
| { | |
| return (CSR1212_BE32_TO_CPU(bus_info_data[2]) >> 8) & 0x3; | |
| } | |
| static struct csr1212_bus_ops nodemgr_csr_ops = { | |
| .bus_read = nodemgr_bus_read, | |
| .get_max_rom = nodemgr_get_max_rom | |
| }; | |
| /* | |
| * Basically what we do here is start off retrieving the bus_info block. | |
| * From there will fill in some info about the node, verify it is of IEEE | |
| * 1394 type, and that the crc checks out ok. After that we start off with | |
| * the root directory, and subdirectories. To do this, we retrieve the | |
| * quadlet header for a directory, find out the length, and retrieve the | |
| * complete directory entry (be it a leaf or a directory). We then process | |
| * it and add the info to our structure for that particular node. | |
| * | |
| * We verify CRC's along the way for each directory/block/leaf. The entire | |
| * node structure is generic, and simply stores the information in a way | |
| * that's easy to parse by the protocol interface. | |
| */ | |
| /* | |
| * The nodemgr relies heavily on the Driver Model for device callbacks and | |
| * driver/device mappings. The old nodemgr used to handle all this itself, | |
| * but now we are much simpler because of the LDM. | |
| */ | |
| static DEFINE_MUTEX(nodemgr_serialize); | |
| struct host_info { | |
| struct hpsb_host *host; | |
| struct list_head list; | |
| struct task_struct *thread; | |
| }; | |
| static int nodemgr_bus_match(struct device * dev, struct device_driver * drv); | |
| static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp, | |
| char *buffer, int buffer_size); | |
| static void nodemgr_resume_ne(struct node_entry *ne); | |
| static void nodemgr_remove_ne(struct node_entry *ne); | |
| static struct node_entry *find_entry_by_guid(u64 guid); | |
| struct bus_type ieee1394_bus_type = { | |
| .name = "ieee1394", | |
| .match = nodemgr_bus_match, | |
| }; | |
| static void host_cls_release(struct class_device *class_dev) | |
| { | |
| put_device(&container_of((class_dev), struct hpsb_host, class_dev)->device); | |
| } | |
| struct class hpsb_host_class = { | |
| .name = "ieee1394_host", | |
| .release = host_cls_release, | |
| }; | |
| static void ne_cls_release(struct class_device *class_dev) | |
| { | |
| put_device(&container_of((class_dev), struct node_entry, class_dev)->device); | |
| } | |
| static struct class nodemgr_ne_class = { | |
| .name = "ieee1394_node", | |
| .release = ne_cls_release, | |
| }; | |
| static void ud_cls_release(struct class_device *class_dev) | |
| { | |
| put_device(&container_of((class_dev), struct unit_directory, class_dev)->device); | |
| } | |
| /* The name here is only so that unit directory hotplug works with old | |
| * style hotplug, which only ever did unit directories anyway. */ | |
| static struct class nodemgr_ud_class = { | |
| .name = "ieee1394", | |
| .release = ud_cls_release, | |
| .uevent = nodemgr_uevent, | |
| }; | |
| static struct hpsb_highlevel nodemgr_highlevel; | |
| static void nodemgr_release_ud(struct device *dev) | |
| { | |
| struct unit_directory *ud = container_of(dev, struct unit_directory, device); | |
| if (ud->vendor_name_kv) | |
| csr1212_release_keyval(ud->vendor_name_kv); | |
| if (ud->model_name_kv) | |
| csr1212_release_keyval(ud->model_name_kv); | |
| kfree(ud); | |
| } | |
| static void nodemgr_release_ne(struct device *dev) | |
| { | |
| struct node_entry *ne = container_of(dev, struct node_entry, device); | |
| if (ne->vendor_name_kv) | |
| csr1212_release_keyval(ne->vendor_name_kv); | |
| kfree(ne); | |
| } | |
| static void nodemgr_release_host(struct device *dev) | |
| { | |
| struct hpsb_host *host = container_of(dev, struct hpsb_host, device); | |
| csr1212_destroy_csr(host->csr.rom); | |
| kfree(host); | |
| } | |
| static int nodemgr_ud_platform_data; | |
| static struct device nodemgr_dev_template_ud = { | |
| .bus = &ieee1394_bus_type, | |
| .release = nodemgr_release_ud, | |
| .platform_data = &nodemgr_ud_platform_data, | |
| }; | |
| static struct device nodemgr_dev_template_ne = { | |
| .bus = &ieee1394_bus_type, | |
| .release = nodemgr_release_ne, | |
| }; | |
| struct device nodemgr_dev_template_host = { | |
| .bus = &ieee1394_bus_type, | |
| .release = nodemgr_release_host, | |
| }; | |
| #define fw_attr(class, class_type, field, type, format_string) \ | |
| static ssize_t fw_show_##class##_##field (struct device *dev, struct device_attribute *attr, char *buf)\ | |
| { \ | |
| class_type *class; \ | |
| class = container_of(dev, class_type, device); \ | |
| return sprintf(buf, format_string, (type)class->field); \ | |
| } \ | |
| static struct device_attribute dev_attr_##class##_##field = { \ | |
| .attr = {.name = __stringify(field), .mode = S_IRUGO }, \ | |
| .show = fw_show_##class##_##field, \ | |
| }; | |
| #define fw_attr_td(class, class_type, td_kv) \ | |
| static ssize_t fw_show_##class##_##td_kv (struct device *dev, struct device_attribute *attr, char *buf)\ | |
| { \ | |
| int len; \ | |
| class_type *class = container_of(dev, class_type, device); \ | |
| len = (class->td_kv->value.leaf.len - 2) * sizeof(quadlet_t); \ | |
| memcpy(buf, \ | |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_DATA(class->td_kv), \ | |
| len); \ | |
| while ((buf + len - 1) == '\0') \ | |
| len--; \ | |
| buf[len++] = '\n'; \ | |
| buf[len] = '\0'; \ | |
| return len; \ | |
| } \ | |
| static struct device_attribute dev_attr_##class##_##td_kv = { \ | |
| .attr = {.name = __stringify(td_kv), .mode = S_IRUGO }, \ | |
| .show = fw_show_##class##_##td_kv, \ | |
| }; | |
| #define fw_drv_attr(field, type, format_string) \ | |
| static ssize_t fw_drv_show_##field (struct device_driver *drv, char *buf) \ | |
| { \ | |
| struct hpsb_protocol_driver *driver; \ | |
| driver = container_of(drv, struct hpsb_protocol_driver, driver); \ | |
| return sprintf(buf, format_string, (type)driver->field);\ | |
| } \ | |
| static struct driver_attribute driver_attr_drv_##field = { \ | |
| .attr = {.name = __stringify(field), .mode = S_IRUGO }, \ | |
| .show = fw_drv_show_##field, \ | |
| }; | |
| static ssize_t fw_show_ne_bus_options(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct node_entry *ne = container_of(dev, struct node_entry, device); | |
| return sprintf(buf, "IRMC(%d) CMC(%d) ISC(%d) BMC(%d) PMC(%d) GEN(%d) " | |
| "LSPD(%d) MAX_REC(%d) MAX_ROM(%d) CYC_CLK_ACC(%d)\n", | |
| ne->busopt.irmc, | |
| ne->busopt.cmc, ne->busopt.isc, ne->busopt.bmc, | |
| ne->busopt.pmc, ne->busopt.generation, ne->busopt.lnkspd, | |
| ne->busopt.max_rec, | |
| ne->busopt.max_rom, | |
| ne->busopt.cyc_clk_acc); | |
| } | |
| static DEVICE_ATTR(bus_options,S_IRUGO,fw_show_ne_bus_options,NULL); | |
| #ifdef HPSB_DEBUG_TLABELS | |
| static ssize_t fw_show_ne_tlabels_free(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct node_entry *ne = container_of(dev, struct node_entry, device); | |
| unsigned long flags; | |
| unsigned long *tp = ne->host->tl_pool[NODEID_TO_NODE(ne->nodeid)].map; | |
| int tf; | |
| spin_lock_irqsave(&hpsb_tlabel_lock, flags); | |
| tf = 64 - bitmap_weight(tp, 64); | |
| spin_unlock_irqrestore(&hpsb_tlabel_lock, flags); | |
| return sprintf(buf, "%d\n", tf); | |
| } | |
| static DEVICE_ATTR(tlabels_free,S_IRUGO,fw_show_ne_tlabels_free,NULL); | |
| static ssize_t fw_show_ne_tlabels_mask(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct node_entry *ne = container_of(dev, struct node_entry, device); | |
| unsigned long flags; | |
| unsigned long *tp = ne->host->tl_pool[NODEID_TO_NODE(ne->nodeid)].map; | |
| u64 tm; | |
| spin_lock_irqsave(&hpsb_tlabel_lock, flags); | |
| #if (BITS_PER_LONG <= 32) | |
| tm = ((u64)tp[0] << 32) + tp[1]; | |
| #else | |
| tm = tp[0]; | |
| #endif | |
| spin_unlock_irqrestore(&hpsb_tlabel_lock, flags); | |
| return sprintf(buf, "0x%016llx\n", tm); | |
| } | |
| static DEVICE_ATTR(tlabels_mask, S_IRUGO, fw_show_ne_tlabels_mask, NULL); | |
| #endif /* HPSB_DEBUG_TLABELS */ | |
| static ssize_t fw_set_ignore_driver(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| struct unit_directory *ud = container_of(dev, struct unit_directory, device); | |
| int state = simple_strtoul(buf, NULL, 10); | |
| if (state == 1) { | |
| down_write(&dev->bus->subsys.rwsem); | |
| device_release_driver(dev); | |
| ud->ignore_driver = 1; | |
| up_write(&dev->bus->subsys.rwsem); | |
| } else if (!state) | |
| ud->ignore_driver = 0; | |
| return count; | |
| } | |
| static ssize_t fw_get_ignore_driver(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| struct unit_directory *ud = container_of(dev, struct unit_directory, device); | |
| return sprintf(buf, "%d\n", ud->ignore_driver); | |
| } | |
| static DEVICE_ATTR(ignore_driver, S_IWUSR | S_IRUGO, fw_get_ignore_driver, fw_set_ignore_driver); | |
| static ssize_t fw_set_destroy_node(struct bus_type *bus, const char *buf, size_t count) | |
| { | |
| struct node_entry *ne; | |
| u64 guid = (u64)simple_strtoull(buf, NULL, 16); | |
| ne = find_entry_by_guid(guid); | |
| if (ne == NULL || !ne->in_limbo) | |
| return -EINVAL; | |
| nodemgr_remove_ne(ne); | |
| return count; | |
| } | |
| static ssize_t fw_get_destroy_node(struct bus_type *bus, char *buf) | |
| { | |
| return sprintf(buf, "You can destroy in_limbo nodes by writing their GUID to this file\n"); | |
| } | |
| static BUS_ATTR(destroy_node, S_IWUSR | S_IRUGO, fw_get_destroy_node, fw_set_destroy_node); | |
| static ssize_t fw_set_rescan(struct bus_type *bus, const char *buf, size_t count) | |
| { | |
| if (simple_strtoul(buf, NULL, 10) == 1) | |
| bus_rescan_devices(&ieee1394_bus_type); | |
| return count; | |
| } | |
| static ssize_t fw_get_rescan(struct bus_type *bus, char *buf) | |
| { | |
| return sprintf(buf, "You can force a rescan of the bus for " | |
| "drivers by writing a 1 to this file\n"); | |
| } | |
| static BUS_ATTR(rescan, S_IWUSR | S_IRUGO, fw_get_rescan, fw_set_rescan); | |
| static ssize_t fw_set_ignore_drivers(struct bus_type *bus, const char *buf, size_t count) | |
| { | |
| int state = simple_strtoul(buf, NULL, 10); | |
| if (state == 1) | |
| ignore_drivers = 1; | |
| else if (!state) | |
| ignore_drivers = 0; | |
| return count; | |
| } | |
| static ssize_t fw_get_ignore_drivers(struct bus_type *bus, char *buf) | |
| { | |
| return sprintf(buf, "%d\n", ignore_drivers); | |
| } | |
| static BUS_ATTR(ignore_drivers, S_IWUSR | S_IRUGO, fw_get_ignore_drivers, fw_set_ignore_drivers); | |
| struct bus_attribute *const fw_bus_attrs[] = { | |
| &bus_attr_destroy_node, | |
| &bus_attr_rescan, | |
| &bus_attr_ignore_drivers, | |
| NULL | |
| }; | |
| fw_attr(ne, struct node_entry, capabilities, unsigned int, "0x%06x\n") | |
| fw_attr(ne, struct node_entry, nodeid, unsigned int, "0x%04x\n") | |
| fw_attr(ne, struct node_entry, vendor_id, unsigned int, "0x%06x\n") | |
| fw_attr_td(ne, struct node_entry, vendor_name_kv) | |
| fw_attr(ne, struct node_entry, vendor_oui, const char *, "%s\n") | |
| fw_attr(ne, struct node_entry, guid, unsigned long long, "0x%016Lx\n") | |
| fw_attr(ne, struct node_entry, guid_vendor_id, unsigned int, "0x%06x\n") | |
| fw_attr(ne, struct node_entry, guid_vendor_oui, const char *, "%s\n") | |
| fw_attr(ne, struct node_entry, in_limbo, int, "%d\n"); | |
| static struct device_attribute *const fw_ne_attrs[] = { | |
| &dev_attr_ne_guid, | |
| &dev_attr_ne_guid_vendor_id, | |
| &dev_attr_ne_capabilities, | |
| &dev_attr_ne_vendor_id, | |
| &dev_attr_ne_nodeid, | |
| &dev_attr_bus_options, | |
| #ifdef HPSB_DEBUG_TLABELS | |
| &dev_attr_tlabels_free, | |
| &dev_attr_tlabels_mask, | |
| #endif | |
| }; | |
| fw_attr(ud, struct unit_directory, address, unsigned long long, "0x%016Lx\n") | |
| fw_attr(ud, struct unit_directory, length, int, "%d\n") | |
| /* These are all dependent on the value being provided */ | |
| fw_attr(ud, struct unit_directory, vendor_id, unsigned int, "0x%06x\n") | |
| fw_attr(ud, struct unit_directory, model_id, unsigned int, "0x%06x\n") | |
| fw_attr(ud, struct unit_directory, specifier_id, unsigned int, "0x%06x\n") | |
| fw_attr(ud, struct unit_directory, version, unsigned int, "0x%06x\n") | |
| fw_attr_td(ud, struct unit_directory, vendor_name_kv) | |
| fw_attr(ud, struct unit_directory, vendor_oui, const char *, "%s\n") | |
| fw_attr_td(ud, struct unit_directory, model_name_kv) | |
| static struct device_attribute *const fw_ud_attrs[] = { | |
| &dev_attr_ud_address, | |
| &dev_attr_ud_length, | |
| &dev_attr_ignore_driver, | |
| }; | |
| fw_attr(host, struct hpsb_host, node_count, int, "%d\n") | |
| fw_attr(host, struct hpsb_host, selfid_count, int, "%d\n") | |
| fw_attr(host, struct hpsb_host, nodes_active, int, "%d\n") | |
| fw_attr(host, struct hpsb_host, in_bus_reset, int, "%d\n") | |
| fw_attr(host, struct hpsb_host, is_root, int, "%d\n") | |
| fw_attr(host, struct hpsb_host, is_cycmst, int, "%d\n") | |
| fw_attr(host, struct hpsb_host, is_irm, int, "%d\n") | |
| fw_attr(host, struct hpsb_host, is_busmgr, int, "%d\n") | |
| static struct device_attribute *const fw_host_attrs[] = { | |
| &dev_attr_host_node_count, | |
| &dev_attr_host_selfid_count, | |
| &dev_attr_host_nodes_active, | |
| &dev_attr_host_in_bus_reset, | |
| &dev_attr_host_is_root, | |
| &dev_attr_host_is_cycmst, | |
| &dev_attr_host_is_irm, | |
| &dev_attr_host_is_busmgr, | |
| }; | |
| static ssize_t fw_show_drv_device_ids(struct device_driver *drv, char *buf) | |
| { | |
| struct hpsb_protocol_driver *driver; | |
| struct ieee1394_device_id *id; | |
| int length = 0; | |
| char *scratch = buf; | |
| driver = container_of(drv, struct hpsb_protocol_driver, driver); | |
| for (id = driver->id_table; id->match_flags != 0; id++) { | |
| int need_coma = 0; | |
| if (id->match_flags & IEEE1394_MATCH_VENDOR_ID) { | |
| length += sprintf(scratch, "vendor_id=0x%06x", id->vendor_id); | |
| scratch = buf + length; | |
| need_coma++; | |
| } | |
| if (id->match_flags & IEEE1394_MATCH_MODEL_ID) { | |
| length += sprintf(scratch, "%smodel_id=0x%06x", | |
| need_coma++ ? "," : "", | |
| id->model_id); | |
| scratch = buf + length; | |
| } | |
| if (id->match_flags & IEEE1394_MATCH_SPECIFIER_ID) { | |
| length += sprintf(scratch, "%sspecifier_id=0x%06x", | |
| need_coma++ ? "," : "", | |
| id->specifier_id); | |
| scratch = buf + length; | |
| } | |
| if (id->match_flags & IEEE1394_MATCH_VERSION) { | |
| length += sprintf(scratch, "%sversion=0x%06x", | |
| need_coma++ ? "," : "", | |
| id->version); | |
| scratch = buf + length; | |
| } | |
| if (need_coma) { | |
| *scratch++ = '\n'; | |
| length++; | |
| } | |
| } | |
| return length; | |
| } | |
| static DRIVER_ATTR(device_ids,S_IRUGO,fw_show_drv_device_ids,NULL); | |
| fw_drv_attr(name, const char *, "%s\n") | |
| static struct driver_attribute *const fw_drv_attrs[] = { | |
| &driver_attr_drv_name, | |
| &driver_attr_device_ids, | |
| }; | |
| static void nodemgr_create_drv_files(struct hpsb_protocol_driver *driver) | |
| { | |
| struct device_driver *drv = &driver->driver; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(fw_drv_attrs); i++) | |
| driver_create_file(drv, fw_drv_attrs[i]); | |
| } | |
| static void nodemgr_remove_drv_files(struct hpsb_protocol_driver *driver) | |
| { | |
| struct device_driver *drv = &driver->driver; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(fw_drv_attrs); i++) | |
| driver_remove_file(drv, fw_drv_attrs[i]); | |
| } | |
| static void nodemgr_create_ne_dev_files(struct node_entry *ne) | |
| { | |
| struct device *dev = &ne->device; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(fw_ne_attrs); i++) | |
| device_create_file(dev, fw_ne_attrs[i]); | |
| } | |
| static void nodemgr_create_host_dev_files(struct hpsb_host *host) | |
| { | |
| struct device *dev = &host->device; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(fw_host_attrs); i++) | |
| device_create_file(dev, fw_host_attrs[i]); | |
| } | |
| static struct node_entry *find_entry_by_nodeid(struct hpsb_host *host, nodeid_t nodeid); | |
| static void nodemgr_update_host_dev_links(struct hpsb_host *host) | |
| { | |
| struct device *dev = &host->device; | |
| struct node_entry *ne; | |
| sysfs_remove_link(&dev->kobj, "irm_id"); | |
| sysfs_remove_link(&dev->kobj, "busmgr_id"); | |
| sysfs_remove_link(&dev->kobj, "host_id"); | |
| if ((ne = find_entry_by_nodeid(host, host->irm_id))) | |
| sysfs_create_link(&dev->kobj, &ne->device.kobj, "irm_id"); | |
| if ((ne = find_entry_by_nodeid(host, host->busmgr_id))) | |
| sysfs_create_link(&dev->kobj, &ne->device.kobj, "busmgr_id"); | |
| if ((ne = find_entry_by_nodeid(host, host->node_id))) | |
| sysfs_create_link(&dev->kobj, &ne->device.kobj, "host_id"); | |
| } | |
| static void nodemgr_create_ud_dev_files(struct unit_directory *ud) | |
| { | |
| struct device *dev = &ud->device; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(fw_ud_attrs); i++) | |
| device_create_file(dev, fw_ud_attrs[i]); | |
| if (ud->flags & UNIT_DIRECTORY_SPECIFIER_ID) | |
| device_create_file(dev, &dev_attr_ud_specifier_id); | |
| if (ud->flags & UNIT_DIRECTORY_VERSION) | |
| device_create_file(dev, &dev_attr_ud_version); | |
| if (ud->flags & UNIT_DIRECTORY_VENDOR_ID) { | |
| device_create_file(dev, &dev_attr_ud_vendor_id); | |
| if (ud->vendor_name_kv) | |
| device_create_file(dev, &dev_attr_ud_vendor_name_kv); | |
| } | |
| if (ud->flags & UNIT_DIRECTORY_MODEL_ID) { | |
| device_create_file(dev, &dev_attr_ud_model_id); | |
| if (ud->model_name_kv) | |
| device_create_file(dev, &dev_attr_ud_model_name_kv); | |
| } | |
| } | |
| static int nodemgr_bus_match(struct device * dev, struct device_driver * drv) | |
| { | |
| struct hpsb_protocol_driver *driver; | |
| struct unit_directory *ud; | |
| struct ieee1394_device_id *id; | |
| /* We only match unit directories */ | |
| if (dev->platform_data != &nodemgr_ud_platform_data) | |
| return 0; | |
| ud = container_of(dev, struct unit_directory, device); | |
| driver = container_of(drv, struct hpsb_protocol_driver, driver); | |
| if (ud->ne->in_limbo || ud->ignore_driver) | |
| return 0; | |
| for (id = driver->id_table; id->match_flags != 0; id++) { | |
| if ((id->match_flags & IEEE1394_MATCH_VENDOR_ID) && | |
| id->vendor_id != ud->vendor_id) | |
| continue; | |
| if ((id->match_flags & IEEE1394_MATCH_MODEL_ID) && | |
| id->model_id != ud->model_id) | |
| continue; | |
| if ((id->match_flags & IEEE1394_MATCH_SPECIFIER_ID) && | |
| id->specifier_id != ud->specifier_id) | |
| continue; | |
| if ((id->match_flags & IEEE1394_MATCH_VERSION) && | |
| id->version != ud->version) | |
| continue; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static void nodemgr_remove_uds(struct node_entry *ne) | |
| { | |
| struct class_device *cdev, *next; | |
| struct unit_directory *ud; | |
| list_for_each_entry_safe(cdev, next, &nodemgr_ud_class.children, node) { | |
| ud = container_of(cdev, struct unit_directory, class_dev); | |
| if (ud->ne != ne) | |
| continue; | |
| class_device_unregister(&ud->class_dev); | |
| device_unregister(&ud->device); | |
| } | |
| } | |
| static void nodemgr_remove_ne(struct node_entry *ne) | |
| { | |
| struct device *dev = &ne->device; | |
| dev = get_device(&ne->device); | |
| if (!dev) | |
| return; | |
| HPSB_DEBUG("Node removed: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]", | |
| NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid); | |
| nodemgr_remove_uds(ne); | |
| class_device_unregister(&ne->class_dev); | |
| device_unregister(dev); | |
| put_device(dev); | |
| } | |
| static int __nodemgr_remove_host_dev(struct device *dev, void *data) | |
| { | |
| nodemgr_remove_ne(container_of(dev, struct node_entry, device)); | |
| return 0; | |
| } | |
| static void nodemgr_remove_host_dev(struct device *dev) | |
| { | |
| device_for_each_child(dev, NULL, __nodemgr_remove_host_dev); | |
| sysfs_remove_link(&dev->kobj, "irm_id"); | |
| sysfs_remove_link(&dev->kobj, "busmgr_id"); | |
| sysfs_remove_link(&dev->kobj, "host_id"); | |
| } | |
| static void nodemgr_update_bus_options(struct node_entry *ne) | |
| { | |
| #ifdef CONFIG_IEEE1394_VERBOSEDEBUG | |
| static const u16 mr[] = { 4, 64, 1024, 0}; | |
| #endif | |
| quadlet_t busoptions = be32_to_cpu(ne->csr->bus_info_data[2]); | |
| ne->busopt.irmc = (busoptions >> 31) & 1; | |
| ne->busopt.cmc = (busoptions >> 30) & 1; | |
| ne->busopt.isc = (busoptions >> 29) & 1; | |
| ne->busopt.bmc = (busoptions >> 28) & 1; | |
| ne->busopt.pmc = (busoptions >> 27) & 1; | |
| ne->busopt.cyc_clk_acc = (busoptions >> 16) & 0xff; | |
| ne->busopt.max_rec = 1 << (((busoptions >> 12) & 0xf) + 1); | |
| ne->busopt.max_rom = (busoptions >> 8) & 0x3; | |
| ne->busopt.generation = (busoptions >> 4) & 0xf; | |
| ne->busopt.lnkspd = busoptions & 0x7; | |
| HPSB_VERBOSE("NodeMgr: raw=0x%08x irmc=%d cmc=%d isc=%d bmc=%d pmc=%d " | |
| "cyc_clk_acc=%d max_rec=%d max_rom=%d gen=%d lspd=%d", | |
| busoptions, ne->busopt.irmc, ne->busopt.cmc, | |
| ne->busopt.isc, ne->busopt.bmc, ne->busopt.pmc, | |
| ne->busopt.cyc_clk_acc, ne->busopt.max_rec, | |
| mr[ne->busopt.max_rom], | |
| ne->busopt.generation, ne->busopt.lnkspd); | |
| } | |
| static struct node_entry *nodemgr_create_node(octlet_t guid, struct csr1212_csr *csr, | |
| struct host_info *hi, nodeid_t nodeid, | |
| unsigned int generation) | |
| { | |
| struct hpsb_host *host = hi->host; | |
| struct node_entry *ne; | |
| ne = kzalloc(sizeof(*ne), GFP_KERNEL); | |
| if (!ne) | |
| return NULL; | |
| ne->host = host; | |
| ne->nodeid = nodeid; | |
| ne->generation = generation; | |
| ne->needs_probe = 1; | |
| ne->guid = guid; | |
| ne->guid_vendor_id = (guid >> 40) & 0xffffff; | |
| ne->guid_vendor_oui = nodemgr_find_oui_name(ne->guid_vendor_id); | |
| ne->csr = csr; | |
| memcpy(&ne->device, &nodemgr_dev_template_ne, | |
| sizeof(ne->device)); | |
| ne->device.parent = &host->device; | |
| snprintf(ne->device.bus_id, BUS_ID_SIZE, "%016Lx", | |
| (unsigned long long)(ne->guid)); | |
| ne->class_dev.dev = &ne->device; | |
| ne->class_dev.class = &nodemgr_ne_class; | |
| snprintf(ne->class_dev.class_id, BUS_ID_SIZE, "%016Lx", | |
| (unsigned long long)(ne->guid)); | |
| device_register(&ne->device); | |
| class_device_register(&ne->class_dev); | |
| get_device(&ne->device); | |
| if (ne->guid_vendor_oui) | |
| device_create_file(&ne->device, &dev_attr_ne_guid_vendor_oui); | |
| nodemgr_create_ne_dev_files(ne); | |
| nodemgr_update_bus_options(ne); | |
| HPSB_DEBUG("%s added: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]", | |
| (host->node_id == nodeid) ? "Host" : "Node", | |
| NODE_BUS_ARGS(host, nodeid), (unsigned long long)guid); | |
| return ne; | |
| } | |
| static struct node_entry *find_entry_by_guid(u64 guid) | |
| { | |
| struct class *class = &nodemgr_ne_class; | |
| struct class_device *cdev; | |
| struct node_entry *ne, *ret_ne = NULL; | |
| down_read(&class->subsys.rwsem); | |
| list_for_each_entry(cdev, &class->children, node) { | |
| ne = container_of(cdev, struct node_entry, class_dev); | |
| if (ne->guid == guid) { | |
| ret_ne = ne; | |
| break; | |
| } | |
| } | |
| up_read(&class->subsys.rwsem); | |
| return ret_ne; | |
| } | |
| static struct node_entry *find_entry_by_nodeid(struct hpsb_host *host, nodeid_t nodeid) | |
| { | |
| struct class *class = &nodemgr_ne_class; | |
| struct class_device *cdev; | |
| struct node_entry *ne, *ret_ne = NULL; | |
| down_read(&class->subsys.rwsem); | |
| list_for_each_entry(cdev, &class->children, node) { | |
| ne = container_of(cdev, struct node_entry, class_dev); | |
| if (ne->host == host && ne->nodeid == nodeid) { | |
| ret_ne = ne; | |
| break; | |
| } | |
| } | |
| up_read(&class->subsys.rwsem); | |
| return ret_ne; | |
| } | |
| static void nodemgr_register_device(struct node_entry *ne, | |
| struct unit_directory *ud, struct device *parent) | |
| { | |
| memcpy(&ud->device, &nodemgr_dev_template_ud, | |
| sizeof(ud->device)); | |
| ud->device.parent = parent; | |
| snprintf(ud->device.bus_id, BUS_ID_SIZE, "%s-%u", | |
| ne->device.bus_id, ud->id); | |
| ud->class_dev.dev = &ud->device; | |
| ud->class_dev.class = &nodemgr_ud_class; | |
| snprintf(ud->class_dev.class_id, BUS_ID_SIZE, "%s-%u", | |
| ne->device.bus_id, ud->id); | |
| device_register(&ud->device); | |
| class_device_register(&ud->class_dev); | |
| get_device(&ud->device); | |
| if (ud->vendor_oui) | |
| device_create_file(&ud->device, &dev_attr_ud_vendor_oui); | |
| nodemgr_create_ud_dev_files(ud); | |
| } | |
| /* This implementation currently only scans the config rom and its | |
| * immediate unit directories looking for software_id and | |
| * software_version entries, in order to get driver autoloading working. */ | |
| static struct unit_directory *nodemgr_process_unit_directory | |
| (struct host_info *hi, struct node_entry *ne, struct csr1212_keyval *ud_kv, | |
| unsigned int *id, struct unit_directory *parent) | |
| { | |
| struct unit_directory *ud; | |
| struct unit_directory *ud_child = NULL; | |
| struct csr1212_dentry *dentry; | |
| struct csr1212_keyval *kv; | |
| u8 last_key_id = 0; | |
| ud = kzalloc(sizeof(*ud), GFP_KERNEL); | |
| if (!ud) | |
| goto unit_directory_error; | |
| ud->ne = ne; | |
| ud->ignore_driver = ignore_drivers; | |
| ud->address = ud_kv->offset + CSR1212_CONFIG_ROM_SPACE_BASE; | |
| ud->ud_kv = ud_kv; | |
| ud->id = (*id)++; | |
| csr1212_for_each_dir_entry(ne->csr, kv, ud_kv, dentry) { | |
| switch (kv->key.id) { | |
| case CSR1212_KV_ID_VENDOR: | |
| if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE) { | |
| ud->vendor_id = kv->value.immediate; | |
| ud->flags |= UNIT_DIRECTORY_VENDOR_ID; | |
| if (ud->vendor_id) | |
| ud->vendor_oui = nodemgr_find_oui_name(ud->vendor_id); | |
| } | |
| break; | |
| case CSR1212_KV_ID_MODEL: | |
| ud->model_id = kv->value.immediate; | |
| ud->flags |= UNIT_DIRECTORY_MODEL_ID; | |
| break; | |
| case CSR1212_KV_ID_SPECIFIER_ID: | |
| ud->specifier_id = kv->value.immediate; | |
| ud->flags |= UNIT_DIRECTORY_SPECIFIER_ID; | |
| break; | |
| case CSR1212_KV_ID_VERSION: | |
| ud->version = kv->value.immediate; | |
| ud->flags |= UNIT_DIRECTORY_VERSION; | |
| break; | |
| case CSR1212_KV_ID_DESCRIPTOR: | |
| if (kv->key.type == CSR1212_KV_TYPE_LEAF && | |
| CSR1212_DESCRIPTOR_LEAF_TYPE(kv) == 0 && | |
| CSR1212_DESCRIPTOR_LEAF_SPECIFIER_ID(kv) == 0 && | |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_WIDTH(kv) == 0 && | |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_CHAR_SET(kv) == 0 && | |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_LANGUAGE(kv) == 0) { | |
| switch (last_key_id) { | |
| case CSR1212_KV_ID_VENDOR: | |
| ud->vendor_name_kv = kv; | |
| csr1212_keep_keyval(kv); | |
| break; | |
| case CSR1212_KV_ID_MODEL: | |
| ud->model_name_kv = kv; | |
| csr1212_keep_keyval(kv); | |
| break; | |
| } | |
| } /* else if (kv->key.type == CSR1212_KV_TYPE_DIRECTORY) ... */ | |
| break; | |
| case CSR1212_KV_ID_DEPENDENT_INFO: | |
| /* Logical Unit Number */ | |
| if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE) { | |
| if (ud->flags & UNIT_DIRECTORY_HAS_LUN) { | |
| ud_child = kmalloc(sizeof(*ud_child), GFP_KERNEL); | |
| if (!ud_child) | |
| goto unit_directory_error; | |
| memcpy(ud_child, ud, sizeof(*ud_child)); | |
| nodemgr_register_device(ne, ud_child, &ne->device); | |
| ud_child = NULL; | |
| ud->id = (*id)++; | |
| } | |
| ud->lun = kv->value.immediate; | |
| ud->flags |= UNIT_DIRECTORY_HAS_LUN; | |
| /* Logical Unit Directory */ | |
| } else if (kv->key.type == CSR1212_KV_TYPE_DIRECTORY) { | |
| /* This should really be done in SBP2 as this is | |
| * doing SBP2 specific parsing. | |
| */ | |
| /* first register the parent unit */ | |
| ud->flags |= UNIT_DIRECTORY_HAS_LUN_DIRECTORY; | |
| if (ud->device.bus != &ieee1394_bus_type) | |
| nodemgr_register_device(ne, ud, &ne->device); | |
| /* process the child unit */ | |
| ud_child = nodemgr_process_unit_directory(hi, ne, kv, id, ud); | |
| if (ud_child == NULL) | |
| break; | |
| /* inherit unspecified values, the driver core picks it up */ | |
| if ((ud->flags & UNIT_DIRECTORY_MODEL_ID) && | |
| !(ud_child->flags & UNIT_DIRECTORY_MODEL_ID)) | |
| { | |
| ud_child->flags |= UNIT_DIRECTORY_MODEL_ID; | |
| ud_child->model_id = ud->model_id; | |
| } | |
| if ((ud->flags & UNIT_DIRECTORY_SPECIFIER_ID) && | |
| !(ud_child->flags & UNIT_DIRECTORY_SPECIFIER_ID)) | |
| { | |
| ud_child->flags |= UNIT_DIRECTORY_SPECIFIER_ID; | |
| ud_child->specifier_id = ud->specifier_id; | |
| } | |
| if ((ud->flags & UNIT_DIRECTORY_VERSION) && | |
| !(ud_child->flags & UNIT_DIRECTORY_VERSION)) | |
| { | |
| ud_child->flags |= UNIT_DIRECTORY_VERSION; | |
| ud_child->version = ud->version; | |
| } | |
| /* register the child unit */ | |
| ud_child->flags |= UNIT_DIRECTORY_LUN_DIRECTORY; | |
| nodemgr_register_device(ne, ud_child, &ud->device); | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| last_key_id = kv->key.id; | |
| } | |
| /* do not process child units here and only if not already registered */ | |
| if (!parent && ud->device.bus != &ieee1394_bus_type) | |
| nodemgr_register_device(ne, ud, &ne->device); | |
| return ud; | |
| unit_directory_error: | |
| kfree(ud); | |
| return NULL; | |
| } | |
| static void nodemgr_process_root_directory(struct host_info *hi, struct node_entry *ne) | |
| { | |
| unsigned int ud_id = 0; | |
| struct csr1212_dentry *dentry; | |
| struct csr1212_keyval *kv; | |
| u8 last_key_id = 0; | |
| ne->needs_probe = 0; | |
| csr1212_for_each_dir_entry(ne->csr, kv, ne->csr->root_kv, dentry) { | |
| switch (kv->key.id) { | |
| case CSR1212_KV_ID_VENDOR: | |
| ne->vendor_id = kv->value.immediate; | |
| if (ne->vendor_id) | |
| ne->vendor_oui = nodemgr_find_oui_name(ne->vendor_id); | |
| break; | |
| case CSR1212_KV_ID_NODE_CAPABILITIES: | |
| ne->capabilities = kv->value.immediate; | |
| break; | |
| case CSR1212_KV_ID_UNIT: | |
| nodemgr_process_unit_directory(hi, ne, kv, &ud_id, NULL); | |
| break; | |
| case CSR1212_KV_ID_DESCRIPTOR: | |
| if (last_key_id == CSR1212_KV_ID_VENDOR) { | |
| if (kv->key.type == CSR1212_KV_TYPE_LEAF && | |
| CSR1212_DESCRIPTOR_LEAF_TYPE(kv) == 0 && | |
| CSR1212_DESCRIPTOR_LEAF_SPECIFIER_ID(kv) == 0 && | |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_WIDTH(kv) == 0 && | |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_CHAR_SET(kv) == 0 && | |
| CSR1212_TEXTUAL_DESCRIPTOR_LEAF_LANGUAGE(kv) == 0) { | |
| ne->vendor_name_kv = kv; | |
| csr1212_keep_keyval(kv); | |
| } | |
| } | |
| break; | |
| } | |
| last_key_id = kv->key.id; | |
| } | |
| if (ne->vendor_oui) | |
| device_create_file(&ne->device, &dev_attr_ne_vendor_oui); | |
| if (ne->vendor_name_kv) | |
| device_create_file(&ne->device, &dev_attr_ne_vendor_name_kv); | |
| } | |
| #ifdef CONFIG_HOTPLUG | |
| static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp, | |
| char *buffer, int buffer_size) | |
| { | |
| struct unit_directory *ud; | |
| int i = 0; | |
| int length = 0; | |
| /* ieee1394:venNmoNspNverN */ | |
| char buf[8 + 1 + 3 + 8 + 2 + 8 + 2 + 8 + 3 + 8 + 1]; | |
| if (!cdev) | |
| return -ENODEV; | |
| ud = container_of(cdev, struct unit_directory, class_dev); | |
| if (ud->ne->in_limbo || ud->ignore_driver) | |
| return -ENODEV; | |
| #define PUT_ENVP(fmt,val) \ | |
| do { \ | |
| int printed; \ | |
| envp[i++] = buffer; \ | |
| printed = snprintf(buffer, buffer_size - length, \ | |
| fmt, val); \ | |
| if ((buffer_size - (length+printed) <= 0) || (i >= num_envp)) \ | |
| return -ENOMEM; \ | |
| length += printed+1; \ | |
| buffer += printed+1; \ | |
| } while (0) | |
| PUT_ENVP("VENDOR_ID=%06x", ud->vendor_id); | |
| PUT_ENVP("MODEL_ID=%06x", ud->model_id); | |
| PUT_ENVP("GUID=%016Lx", (unsigned long long)ud->ne->guid); | |
| PUT_ENVP("SPECIFIER_ID=%06x", ud->specifier_id); | |
| PUT_ENVP("VERSION=%06x", ud->version); | |
| snprintf(buf, sizeof(buf), "ieee1394:ven%08Xmo%08Xsp%08Xver%08X", | |
| ud->vendor_id, | |
| ud->model_id, | |
| ud->specifier_id, | |
| ud->version); | |
| PUT_ENVP("MODALIAS=%s", buf); | |
| #undef PUT_ENVP | |
| envp[i] = NULL; | |
| return 0; | |
| } | |
| #else | |
| static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp, | |
| char *buffer, int buffer_size) | |
| { | |
| return -ENODEV; | |
| } | |
| #endif /* CONFIG_HOTPLUG */ | |
| int hpsb_register_protocol(struct hpsb_protocol_driver *driver) | |
| { | |
| int ret; | |
| /* This will cause a probe for devices */ | |
| ret = driver_register(&driver->driver); | |
| if (!ret) | |
| nodemgr_create_drv_files(driver); | |
| return ret; | |
| } | |
| void hpsb_unregister_protocol(struct hpsb_protocol_driver *driver) | |
| { | |
| nodemgr_remove_drv_files(driver); | |
| /* This will subsequently disconnect all devices that our driver | |
| * is attached to. */ | |
| driver_unregister(&driver->driver); | |
| } | |
| /* | |
| * This function updates nodes that were present on the bus before the | |
| * reset and still are after the reset. The nodeid and the config rom | |
| * may have changed, and the drivers managing this device must be | |
| * informed that this device just went through a bus reset, to allow | |
| * the to take whatever actions required. | |
| */ | |
| static void nodemgr_update_node(struct node_entry *ne, struct csr1212_csr *csr, | |
| struct host_info *hi, nodeid_t nodeid, | |
| unsigned int generation) | |
| { | |
| if (ne->nodeid != nodeid) { | |
| HPSB_DEBUG("Node changed: " NODE_BUS_FMT " -> " NODE_BUS_FMT, | |
| NODE_BUS_ARGS(ne->host, ne->nodeid), | |
| NODE_BUS_ARGS(ne->host, nodeid)); | |
| ne->nodeid = nodeid; | |
| } | |
| if (ne->busopt.generation != ((be32_to_cpu(csr->bus_info_data[2]) >> 4) & 0xf)) { | |
| kfree(ne->csr->private); | |
| csr1212_destroy_csr(ne->csr); | |
| ne->csr = csr; | |
| /* If the node's configrom generation has changed, we | |
| * unregister all the unit directories. */ | |
| nodemgr_remove_uds(ne); | |
| nodemgr_update_bus_options(ne); | |
| /* Mark the node as new, so it gets re-probed */ | |
| ne->needs_probe = 1; | |
| } else { | |
| /* old cache is valid, so update its generation */ | |
| struct nodemgr_csr_info *ci = ne->csr->private; | |
| ci->generation = generation; | |
| /* free the partially filled now unneeded new cache */ | |
| kfree(csr->private); | |
| csr1212_destroy_csr(csr); | |
| } | |
| if (ne->in_limbo) | |
| nodemgr_resume_ne(ne); | |
| /* Mark the node current */ | |
| ne->generation = generation; | |
| } | |
| static void nodemgr_node_scan_one(struct host_info *hi, | |
| nodeid_t nodeid, int generation) | |
| { | |
| struct hpsb_host *host = hi->host; | |
| struct node_entry *ne; | |
| octlet_t guid; | |
| struct csr1212_csr *csr; | |
| struct nodemgr_csr_info *ci; | |
| u8 *speed; | |
| ci = kmalloc(sizeof(*ci), GFP_KERNEL); | |
| if (!ci) | |
| return; | |
| ci->host = host; | |
| ci->nodeid = nodeid; | |
| ci->generation = generation; | |
| /* Prepare for speed probe which occurs when reading the ROM */ | |
| speed = &(host->speed[NODEID_TO_NODE(nodeid)]); | |
| if (*speed > host->csr.lnk_spd) | |
| *speed = host->csr.lnk_spd; | |
| ci->speed_unverified = *speed > IEEE1394_SPEED_100; | |
| /* We need to detect when the ConfigROM's generation has changed, | |
| * so we only update the node's info when it needs to be. */ | |
| csr = csr1212_create_csr(&nodemgr_csr_ops, 5 * sizeof(quadlet_t), ci); | |
| if (!csr || csr1212_parse_csr(csr) != CSR1212_SUCCESS) { | |
| HPSB_ERR("Error parsing configrom for node " NODE_BUS_FMT, | |
| NODE_BUS_ARGS(host, nodeid)); | |
| if (csr) | |
| csr1212_destroy_csr(csr); | |
| kfree(ci); | |
| return; | |
| } | |
| if (csr->bus_info_data[1] != IEEE1394_BUSID_MAGIC) { | |
| /* This isn't a 1394 device, but we let it slide. There | |
| * was a report of a device with broken firmware which | |
| * reported '2394' instead of '1394', which is obviously a | |
| * mistake. One would hope that a non-1394 device never | |
| * gets connected to Firewire bus. If someone does, we | |
| * shouldn't be held responsible, so we'll allow it with a | |
| * warning. */ | |
| HPSB_WARN("Node " NODE_BUS_FMT " has invalid busID magic [0x%08x]", | |
| NODE_BUS_ARGS(host, nodeid), csr->bus_info_data[1]); | |
| } | |
| guid = ((u64)be32_to_cpu(csr->bus_info_data[3]) << 32) | be32_to_cpu(csr->bus_info_data[4]); | |
| ne = find_entry_by_guid(guid); | |
| if (ne && ne->host != host && ne->in_limbo) { | |
| /* Must have moved this device from one host to another */ | |
| nodemgr_remove_ne(ne); | |
| ne = NULL; | |
| } | |
| if (!ne) | |
| nodemgr_create_node(guid, csr, hi, nodeid, generation); | |
| else | |
| nodemgr_update_node(ne, csr, hi, nodeid, generation); | |
| } | |
| static void nodemgr_node_scan(struct host_info *hi, int generation) | |
| { | |
| int count; | |
| struct hpsb_host *host = hi->host; | |
| struct selfid *sid = (struct selfid *)host->topology_map; | |
| nodeid_t nodeid = LOCAL_BUS; | |
| /* Scan each node on the bus */ | |
| for (count = host->selfid_count; count; count--, sid++) { | |
| if (sid->extended) | |
| continue; | |
| if (!sid->link_active) { | |
| nodeid++; | |
| continue; | |
| } | |
| nodemgr_node_scan_one(hi, nodeid++, generation); | |
| } | |
| } | |
| /* Caller needs to hold nodemgr_ud_class.subsys.rwsem as reader. */ | |
| static void nodemgr_suspend_ne(struct node_entry *ne) | |
| { | |
| struct class_device *cdev; | |
| struct unit_directory *ud; | |
| HPSB_DEBUG("Node suspended: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]", | |
| NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid); | |
| ne->in_limbo = 1; | |
| device_create_file(&ne->device, &dev_attr_ne_in_limbo); | |
| down_write(&ne->device.bus->subsys.rwsem); | |
| list_for_each_entry(cdev, &nodemgr_ud_class.children, node) { | |
| ud = container_of(cdev, struct unit_directory, class_dev); | |
| if (ud->ne != ne) | |
| continue; | |
| if (ud->device.driver && | |
| (!ud->device.driver->suspend || | |
| ud->device.driver->suspend(&ud->device, PMSG_SUSPEND))) | |
| device_release_driver(&ud->device); | |
| } | |
| up_write(&ne->device.bus->subsys.rwsem); | |
| } | |
| static void nodemgr_resume_ne(struct node_entry *ne) | |
| { | |
| struct class_device *cdev; | |
| struct unit_directory *ud; | |
| ne->in_limbo = 0; | |
| device_remove_file(&ne->device, &dev_attr_ne_in_limbo); | |
| down_read(&nodemgr_ud_class.subsys.rwsem); | |
| down_read(&ne->device.bus->subsys.rwsem); | |
| list_for_each_entry(cdev, &nodemgr_ud_class.children, node) { | |
| ud = container_of(cdev, struct unit_directory, class_dev); | |
| if (ud->ne != ne) | |
| continue; | |
| if (ud->device.driver && ud->device.driver->resume) | |
| ud->device.driver->resume(&ud->device); | |
| } | |
| up_read(&ne->device.bus->subsys.rwsem); | |
| up_read(&nodemgr_ud_class.subsys.rwsem); | |
| HPSB_DEBUG("Node resumed: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]", | |
| NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid); | |
| } | |
| /* Caller needs to hold nodemgr_ud_class.subsys.rwsem as reader. */ | |
| static void nodemgr_update_pdrv(struct node_entry *ne) | |
| { | |
| struct unit_directory *ud; | |
| struct hpsb_protocol_driver *pdrv; | |
| struct class_device *cdev; | |
| list_for_each_entry(cdev, &nodemgr_ud_class.children, node) { | |
| ud = container_of(cdev, struct unit_directory, class_dev); | |
| if (ud->ne != ne || !ud->device.driver) | |
| continue; | |
| pdrv = container_of(ud->device.driver, struct hpsb_protocol_driver, driver); | |
| if (pdrv->update && pdrv->update(ud)) { | |
| down_write(&ud->device.bus->subsys.rwsem); | |
| device_release_driver(&ud->device); | |
| up_write(&ud->device.bus->subsys.rwsem); | |
| } | |
| } | |
| } | |
| /* Write the BROADCAST_CHANNEL as per IEEE1394a 8.3.2.3.11 and 8.4.2.3. This | |
| * seems like an optional service but in the end it is practically mandatory | |
| * as a consequence of these clauses. | |
| * | |
| * Note that we cannot do a broadcast write to all nodes at once because some | |
| * pre-1394a devices would hang. */ | |
| static void nodemgr_irm_write_bc(struct node_entry *ne, int generation) | |
| { | |
| const u64 bc_addr = (CSR_REGISTER_BASE | CSR_BROADCAST_CHANNEL); | |
| quadlet_t bc_remote, bc_local; | |
| int ret; | |
| if (!ne->host->is_irm || ne->generation != generation || | |
| ne->nodeid == ne->host->node_id) | |
| return; | |
| bc_local = cpu_to_be32(ne->host->csr.broadcast_channel); | |
| /* Check if the register is implemented and 1394a compliant. */ | |
| ret = hpsb_read(ne->host, ne->nodeid, generation, bc_addr, &bc_remote, | |
| sizeof(bc_remote)); | |
| if (!ret && bc_remote & cpu_to_be32(0x80000000) && | |
| bc_remote != bc_local) | |
| hpsb_node_write(ne, bc_addr, &bc_local, sizeof(bc_local)); | |
| } | |
| /* Caller needs to hold nodemgr_ud_class.subsys.rwsem as reader because the | |
| * calls to nodemgr_update_pdrv() and nodemgr_suspend_ne() here require it. */ | |
| static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int generation) | |
| { | |
| struct device *dev; | |
| if (ne->host != hi->host || ne->in_limbo) | |
| return; | |
| dev = get_device(&ne->device); | |
| if (!dev) | |
| return; | |
| nodemgr_irm_write_bc(ne, generation); | |
| /* If "needs_probe", then this is either a new or changed node we | |
| * rescan totally. If the generation matches for an existing node | |
| * (one that existed prior to the bus reset) we send update calls | |
| * down to the drivers. Otherwise, this is a dead node and we | |
| * suspend it. */ | |
| if (ne->needs_probe) | |
| nodemgr_process_root_directory(hi, ne); | |
| else if (ne->generation == generation) | |
| nodemgr_update_pdrv(ne); | |
| else | |
| nodemgr_suspend_ne(ne); | |
| put_device(dev); | |
| } | |
| static void nodemgr_node_probe(struct host_info *hi, int generation) | |
| { | |
| struct hpsb_host *host = hi->host; | |
| struct class *class = &nodemgr_ne_class; | |
| struct class_device *cdev; | |
| struct node_entry *ne; | |
| /* Do some processing of the nodes we've probed. This pulls them | |
| * into the sysfs layer if needed, and can result in processing of | |
| * unit-directories, or just updating the node and it's | |
| * unit-directories. | |
| * | |
| * Run updates before probes. Usually, updates are time-critical | |
| * while probes are time-consuming. (Well, those probes need some | |
| * improvement...) */ | |
| down_read(&class->subsys.rwsem); | |
| list_for_each_entry(cdev, &class->children, node) { | |
| ne = container_of(cdev, struct node_entry, class_dev); | |
| if (!ne->needs_probe) | |
| nodemgr_probe_ne(hi, ne, generation); | |
| } | |
| list_for_each_entry(cdev, &class->children, node) { | |
| ne = container_of(cdev, struct node_entry, class_dev); | |
| if (ne->needs_probe) | |
| nodemgr_probe_ne(hi, ne, generation); | |
| } | |
| up_read(&class->subsys.rwsem); | |
| /* If we had a bus reset while we were scanning the bus, it is | |
| * possible that we did not probe all nodes. In that case, we | |
| * skip the clean up for now, since we could remove nodes that | |
| * were still on the bus. Another bus scan is pending which will | |
| * do the clean up eventually. | |
| * | |
| * Now let's tell the bus to rescan our devices. This may seem | |
| * like overhead, but the driver-model core will only scan a | |
| * device for a driver when either the device is added, or when a | |
| * new driver is added. A bus reset is a good reason to rescan | |
| * devices that were there before. For example, an sbp2 device | |
| * may become available for login, if the host that held it was | |
| * just removed. */ | |
| if (generation == get_hpsb_generation(host)) | |
| bus_rescan_devices(&ieee1394_bus_type); | |
| return; | |
| } | |
| static int nodemgr_send_resume_packet(struct hpsb_host *host) | |
| { | |
| struct hpsb_packet *packet; | |
| int ret = 1; | |
| packet = hpsb_make_phypacket(host, | |
| EXTPHYPACKET_TYPE_RESUME | | |
| NODEID_TO_NODE(host->node_id) << PHYPACKET_PORT_SHIFT); | |
| if (packet) { | |
| packet->no_waiter = 1; | |
| packet->generation = get_hpsb_generation(host); | |
| ret = hpsb_send_packet(packet); | |
| } | |
| if (ret) | |
| HPSB_WARN("fw-host%d: Failed to broadcast resume packet", | |
| host->id); | |
| return ret; | |
| } | |
| /* Perform a few high-level IRM responsibilities. */ | |
| static int nodemgr_do_irm_duties(struct hpsb_host *host, int cycles) | |
| { | |
| quadlet_t bc; | |
| /* if irm_id == -1 then there is no IRM on this bus */ | |
| if (!host->is_irm || host->irm_id == (nodeid_t)-1) | |
| return 1; | |
| /* We are a 1394a-2000 compliant IRM. Set the validity bit. */ | |
| host->csr.broadcast_channel |= 0x40000000; | |
| /* If there is no bus manager then we should set the root node's | |
| * force_root bit to promote bus stability per the 1394 | |
| * spec. (8.4.2.6) */ | |
| if (host->busmgr_id == 0xffff && host->node_count > 1) | |
| { | |
| u16 root_node = host->node_count - 1; | |
| /* get cycle master capability flag from root node */ | |
| if (host->is_cycmst || | |
| (!hpsb_read(host, LOCAL_BUS | root_node, get_hpsb_generation(host), | |
| (CSR_REGISTER_BASE + CSR_CONFIG_ROM + 2 * sizeof(quadlet_t)), | |
| &bc, sizeof(quadlet_t)) && | |
| be32_to_cpu(bc) & 1 << CSR_CMC_SHIFT)) | |
| hpsb_send_phy_config(host, root_node, -1); | |
| else { | |
| HPSB_DEBUG("The root node is not cycle master capable; " | |
| "selecting a new root node and resetting..."); | |
| if (cycles >= 5) { | |
| /* Oh screw it! Just leave the bus as it is */ | |
| HPSB_DEBUG("Stopping reset loop for IRM sanity"); | |
| return 1; | |
| } | |
| hpsb_send_phy_config(host, NODEID_TO_NODE(host->node_id), -1); | |
| hpsb_reset_bus(host, LONG_RESET_FORCE_ROOT); | |
| return 0; | |
| } | |
| } | |
| /* Some devices suspend their ports while being connected to an inactive | |
| * host adapter, i.e. if connected before the low-level driver is | |
| * loaded. They become visible either when physically unplugged and | |
| * replugged, or when receiving a resume packet. Send one once. */ | |
| if (!host->resume_packet_sent && !nodemgr_send_resume_packet(host)) | |
| host->resume_packet_sent = 1; | |
| return 1; | |
| } | |
| /* We need to ensure that if we are not the IRM, that the IRM node is capable of | |
| * everything we can do, otherwise issue a bus reset and try to become the IRM | |
| * ourselves. */ | |
| static int nodemgr_check_irm_capability(struct hpsb_host *host, int cycles) | |
| { | |
| quadlet_t bc; | |
| int status; | |
| if (hpsb_disable_irm || host->is_irm) | |
| return 1; | |
| status = hpsb_read(host, LOCAL_BUS | (host->irm_id), | |
| get_hpsb_generation(host), | |
| (CSR_REGISTER_BASE | CSR_BROADCAST_CHANNEL), | |
| &bc, sizeof(quadlet_t)); | |
| if (status < 0 || !(be32_to_cpu(bc) & 0x80000000)) { | |
| /* The current irm node does not have a valid BROADCAST_CHANNEL | |
| * register and we do, so reset the bus with force_root set */ | |
| HPSB_DEBUG("Current remote IRM is not 1394a-2000 compliant, resetting..."); | |
| if (cycles >= 5) { | |
| /* Oh screw it! Just leave the bus as it is */ | |
| HPSB_DEBUG("Stopping reset loop for IRM sanity"); | |
| return 1; | |
| } | |
| hpsb_send_phy_config(host, NODEID_TO_NODE(host->node_id), -1); | |
| hpsb_reset_bus(host, LONG_RESET_FORCE_ROOT); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| static int nodemgr_host_thread(void *__hi) | |
| { | |
| struct host_info *hi = (struct host_info *)__hi; | |
| struct hpsb_host *host = hi->host; | |
| unsigned int g, generation = 0; | |
| int i, reset_cycles = 0; | |
| /* Setup our device-model entries */ | |
| nodemgr_create_host_dev_files(host); | |
| for (;;) { | |
| /* Sleep until next bus reset */ | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| if (get_hpsb_generation(host) == generation) | |
| schedule(); | |
| __set_current_state(TASK_RUNNING); | |
| /* Thread may have been woken up to freeze or to exit */ | |
| if (try_to_freeze()) | |
| continue; | |
| if (kthread_should_stop()) | |
| goto exit; | |
| if (mutex_lock_interruptible(&nodemgr_serialize)) { | |
| if (try_to_freeze()) | |
| continue; | |
| goto exit; | |
| } | |
| /* Pause for 1/4 second in 1/16 second intervals, | |
| * to make sure things settle down. */ | |
| g = get_hpsb_generation(host); | |
| for (i = 0; i < 4 ; i++) { | |
| if (msleep_interruptible(63) || kthread_should_stop()) | |
| goto unlock_exit; | |
| /* Now get the generation in which the node ID's we collect | |
| * are valid. During the bus scan we will use this generation | |
| * for the read transactions, so that if another reset occurs | |
| * during the scan the transactions will fail instead of | |
| * returning bogus data. */ | |
| generation = get_hpsb_generation(host); | |
| /* If we get a reset before we are done waiting, then | |
| * start the the waiting over again */ | |
| if (generation != g) | |
| g = generation, i = 0; | |
| } | |
| if (!nodemgr_check_irm_capability(host, reset_cycles) || | |
| !nodemgr_do_irm_duties(host, reset_cycles)) { | |
| reset_cycles++; | |
| mutex_unlock(&nodemgr_serialize); | |
| continue; | |
| } | |
| reset_cycles = 0; | |
| /* Scan our nodes to get the bus options and create node | |
| * entries. This does not do the sysfs stuff, since that | |
| * would trigger uevents and such, which is a bad idea at | |
| * this point. */ | |
| nodemgr_node_scan(hi, generation); | |
| /* This actually does the full probe, with sysfs | |
| * registration. */ | |
| nodemgr_node_probe(hi, generation); | |
| /* Update some of our sysfs symlinks */ | |
| nodemgr_update_host_dev_links(host); | |
| mutex_unlock(&nodemgr_serialize); | |
| } | |
| unlock_exit: | |
| mutex_unlock(&nodemgr_serialize); | |
| exit: | |
| HPSB_VERBOSE("NodeMgr: Exiting thread"); | |
| return 0; | |
| } | |
| int nodemgr_for_each_host(void *__data, int (*cb)(struct hpsb_host *, void *)) | |
| { | |
| struct class *class = &hpsb_host_class; | |
| struct class_device *cdev; | |
| struct hpsb_host *host; | |
| int error = 0; | |
| down_read(&class->subsys.rwsem); | |
| list_for_each_entry(cdev, &class->children, node) { | |
| host = container_of(cdev, struct hpsb_host, class_dev); | |
| if ((error = cb(host, __data))) | |
| break; | |
| } | |
| up_read(&class->subsys.rwsem); | |
| return error; | |
| } | |
| /* The following four convenience functions use a struct node_entry | |
| * for addressing a node on the bus. They are intended for use by any | |
| * process context, not just the nodemgr thread, so we need to be a | |
| * little careful when reading out the node ID and generation. The | |
| * thing that can go wrong is that we get the node ID, then a bus | |
| * reset occurs, and then we read the generation. The node ID is | |
| * possibly invalid, but the generation is current, and we end up | |
| * sending a packet to a the wrong node. | |
| * | |
| * The solution is to make sure we read the generation first, so that | |
| * if a reset occurs in the process, we end up with a stale generation | |
| * and the transactions will fail instead of silently using wrong node | |
| * ID's. | |
| */ | |
| void hpsb_node_fill_packet(struct node_entry *ne, struct hpsb_packet *pkt) | |
| { | |
| pkt->host = ne->host; | |
| pkt->generation = ne->generation; | |
| barrier(); | |
| pkt->node_id = ne->nodeid; | |
| } | |
| int hpsb_node_write(struct node_entry *ne, u64 addr, | |
| quadlet_t *buffer, size_t length) | |
| { | |
| unsigned int generation = ne->generation; | |
| barrier(); | |
| return hpsb_write(ne->host, ne->nodeid, generation, | |
| addr, buffer, length); | |
| } | |
| static void nodemgr_add_host(struct hpsb_host *host) | |
| { | |
| struct host_info *hi; | |
| hi = hpsb_create_hostinfo(&nodemgr_highlevel, host, sizeof(*hi)); | |
| if (!hi) { | |
| HPSB_ERR("NodeMgr: out of memory in add host"); | |
| return; | |
| } | |
| hi->host = host; | |
| hi->thread = kthread_run(nodemgr_host_thread, hi, "knodemgrd_%d", | |
| host->id); | |
| if (IS_ERR(hi->thread)) { | |
| HPSB_ERR("NodeMgr: cannot start thread for host %d", host->id); | |
| hpsb_destroy_hostinfo(&nodemgr_highlevel, host); | |
| } | |
| } | |
| static void nodemgr_host_reset(struct hpsb_host *host) | |
| { | |
| struct host_info *hi = hpsb_get_hostinfo(&nodemgr_highlevel, host); | |
| if (hi) { | |
| HPSB_VERBOSE("NodeMgr: Processing reset for host %d", host->id); | |
| wake_up_process(hi->thread); | |
| } | |
| } | |
| static void nodemgr_remove_host(struct hpsb_host *host) | |
| { | |
| struct host_info *hi = hpsb_get_hostinfo(&nodemgr_highlevel, host); | |
| if (hi) { | |
| kthread_stop(hi->thread); | |
| nodemgr_remove_host_dev(&host->device); | |
| } | |
| } | |
| static struct hpsb_highlevel nodemgr_highlevel = { | |
| .name = "Node manager", | |
| .add_host = nodemgr_add_host, | |
| .host_reset = nodemgr_host_reset, | |
| .remove_host = nodemgr_remove_host, | |
| }; | |
| int init_ieee1394_nodemgr(void) | |
| { | |
| int ret; | |
| ret = class_register(&nodemgr_ne_class); | |
| if (ret < 0) | |
| return ret; | |
| ret = class_register(&nodemgr_ud_class); | |
| if (ret < 0) { | |
| class_unregister(&nodemgr_ne_class); | |
| return ret; | |
| } | |
| hpsb_register_highlevel(&nodemgr_highlevel); | |
| return 0; | |
| } | |
| void cleanup_ieee1394_nodemgr(void) | |
| { | |
| hpsb_unregister_highlevel(&nodemgr_highlevel); | |
| class_unregister(&nodemgr_ud_class); | |
| class_unregister(&nodemgr_ne_class); | |
| } |