| #ifndef __THERM_PMAC_7_2_H__ | |
| #define __THERM_PMAC_7_2_H__ | |
| typedef unsigned short fu16; | |
| typedef int fs32; | |
| typedef short fs16; | |
| struct mpu_data | |
| { | |
| u8 signature; /* 0x00 - EEPROM sig. */ | |
| u8 bytes_used; /* 0x01 - Bytes used in eeprom (160 ?) */ | |
| u8 size; /* 0x02 - EEPROM size (256 ?) */ | |
| u8 version; /* 0x03 - EEPROM version */ | |
| u32 data_revision; /* 0x04 - Dataset revision */ | |
| u8 processor_bin_code[3]; /* 0x08 - Processor BIN code */ | |
| u8 bin_code_expansion; /* 0x0b - ??? (padding ?) */ | |
| u8 processor_num; /* 0x0c - Number of CPUs on this MPU */ | |
| u8 input_mul_bus_div; /* 0x0d - Clock input multiplier/bus divider */ | |
| u8 reserved1[2]; /* 0x0e - */ | |
| u32 input_clk_freq_high; /* 0x10 - Input clock frequency high */ | |
| u8 cpu_nb_target_cycles; /* 0x14 - ??? */ | |
| u8 cpu_statlat; /* 0x15 - ??? */ | |
| u8 cpu_snooplat; /* 0x16 - ??? */ | |
| u8 cpu_snoopacc; /* 0x17 - ??? */ | |
| u8 nb_paamwin; /* 0x18 - ??? */ | |
| u8 nb_statlat; /* 0x19 - ??? */ | |
| u8 nb_snooplat; /* 0x1a - ??? */ | |
| u8 nb_snoopwin; /* 0x1b - ??? */ | |
| u8 api_bus_mode; /* 0x1c - ??? */ | |
| u8 reserved2[3]; /* 0x1d - */ | |
| u32 input_clk_freq_low; /* 0x20 - Input clock frequency low */ | |
| u8 processor_card_slot; /* 0x24 - Processor card slot number */ | |
| u8 reserved3[2]; /* 0x25 - */ | |
| u8 padjmax; /* 0x27 - Max power adjustment (Not in OF!) */ | |
| u8 ttarget; /* 0x28 - Target temperature */ | |
| u8 tmax; /* 0x29 - Max temperature */ | |
| u8 pmaxh; /* 0x2a - Max power */ | |
| u8 tguardband; /* 0x2b - Guardband temp ??? Hist. len in OSX */ | |
| fs32 pid_gp; /* 0x2c - PID proportional gain */ | |
| fs32 pid_gr; /* 0x30 - PID reset gain */ | |
| fs32 pid_gd; /* 0x34 - PID derivative gain */ | |
| fu16 voph; /* 0x38 - Vop High */ | |
| fu16 vopl; /* 0x3a - Vop Low */ | |
| fs16 nactual_die; /* 0x3c - nActual Die */ | |
| fs16 nactual_heatsink; /* 0x3e - nActual Heatsink */ | |
| fs16 nactual_system; /* 0x40 - nActual System */ | |
| u16 calibration_flags; /* 0x42 - Calibration flags */ | |
| fu16 mdiode; /* 0x44 - Diode M value (scaling factor) */ | |
| fs16 bdiode; /* 0x46 - Diode B value (offset) */ | |
| fs32 theta_heat_sink; /* 0x48 - Theta heat sink */ | |
| u16 rminn_intake_fan; /* 0x4c - Intake fan min RPM */ | |
| u16 rmaxn_intake_fan; /* 0x4e - Intake fan max RPM */ | |
| u16 rminn_exhaust_fan; /* 0x50 - Exhaust fan min RPM */ | |
| u16 rmaxn_exhaust_fan; /* 0x52 - Exhaust fan max RPM */ | |
| u8 processor_part_num[8]; /* 0x54 - Processor part number XX pumps min/max */ | |
| u32 processor_lot_num; /* 0x5c - Processor lot number */ | |
| u8 orig_card_sernum[0x10]; /* 0x60 - Card original serial number */ | |
| u8 curr_card_sernum[0x10]; /* 0x70 - Card current serial number */ | |
| u8 mlb_sernum[0x18]; /* 0x80 - MLB serial number */ | |
| u32 checksum1; /* 0x98 - */ | |
| u32 checksum2; /* 0x9c - */ | |
| }; /* Total size = 0xa0 */ | |
| /* Display a 16.16 fixed point value */ | |
| #define FIX32TOPRINT(f) ((f) >> 16),((((f) & 0xffff) * 1000) >> 16) | |
| /* | |
| * Maximum number of seconds to be in critical state (after a | |
| * normal shutdown attempt). If the machine isn't down after | |
| * this counter elapses, we force an immediate machine power | |
| * off. | |
| */ | |
| #define MAX_CRITICAL_STATE 30 | |
| static char * critical_overtemp_path = "/sbin/critical_overtemp"; | |
| /* | |
| * This option is "weird" :) Basically, if you define this to 1 | |
| * the control loop for the RPMs fans (not PWMs) will apply the | |
| * correction factor obtained from the PID to the _actual_ RPM | |
| * speed read from the FCU. | |
| * If you define the below constant to 0, then it will be | |
| * applied to the setpoint RPM speed, that is basically the | |
| * speed we proviously "asked" for. | |
| * | |
| * I'm not sure which of these Apple's algorithm is supposed | |
| * to use | |
| */ | |
| #define RPM_PID_USE_ACTUAL_SPEED 0 | |
| /* | |
| * i2c IDs. Currently, we hard code those and assume that | |
| * the FCU is on U3 bus 1 while all sensors are on U3 bus | |
| * 0. This appear to be safe enough for this first version | |
| * of the driver, though I would accept any clean patch | |
| * doing a better use of the device-tree without turning the | |
| * while i2c registration mechanism into a racy mess | |
| * | |
| * Note: Xserve changed this. We have some bits on the K2 bus, | |
| * which I arbitrarily set to 0x200. Ultimately, we really want | |
| * too lookup these in the device-tree though | |
| */ | |
| #define FAN_CTRLER_ID 0x15e | |
| #define SUPPLY_MONITOR_ID 0x58 | |
| #define SUPPLY_MONITORB_ID 0x5a | |
| #define DRIVES_DALLAS_ID 0x94 | |
| #define BACKSIDE_MAX_ID 0x98 | |
| #define XSERVE_DIMMS_LM87 0x25a | |
| #define XSERVE_SLOTS_LM75 0x290 | |
| /* | |
| * Some MAX6690, DS1775, LM87 register definitions | |
| */ | |
| #define MAX6690_INT_TEMP 0 | |
| #define MAX6690_EXT_TEMP 1 | |
| #define DS1775_TEMP 0 | |
| #define LM87_INT_TEMP 0x27 | |
| /* | |
| * Scaling factors for the AD7417 ADC converters (except | |
| * for the CPU diode which is obtained from the EEPROM). | |
| * Those values are obtained from the property list of | |
| * the darwin driver | |
| */ | |
| #define ADC_12V_CURRENT_SCALE 0x0320 /* _AD2 */ | |
| #define ADC_CPU_VOLTAGE_SCALE 0x00a0 /* _AD3 */ | |
| #define ADC_CPU_CURRENT_SCALE 0x1f40 /* _AD4 */ | |
| /* | |
| * PID factors for the U3/Backside fan control loop. We have 2 sets | |
| * of values here, one set for U3 and one set for U3H | |
| */ | |
| #define BACKSIDE_FAN_PWM_DEFAULT_ID 1 | |
| #define BACKSIDE_FAN_PWM_INDEX 0 | |
| #define BACKSIDE_PID_U3_G_d 0x02800000 | |
| #define BACKSIDE_PID_U3H_G_d 0x01400000 | |
| #define BACKSIDE_PID_RACK_G_d 0x00500000 | |
| #define BACKSIDE_PID_G_p 0x00500000 | |
| #define BACKSIDE_PID_RACK_G_p 0x0004cccc | |
| #define BACKSIDE_PID_G_r 0x00000000 | |
| #define BACKSIDE_PID_U3_INPUT_TARGET 0x00410000 | |
| #define BACKSIDE_PID_U3H_INPUT_TARGET 0x004b0000 | |
| #define BACKSIDE_PID_RACK_INPUT_TARGET 0x00460000 | |
| #define BACKSIDE_PID_INTERVAL 5 | |
| #define BACKSIDE_PID_RACK_INTERVAL 1 | |
| #define BACKSIDE_PID_OUTPUT_MAX 100 | |
| #define BACKSIDE_PID_U3_OUTPUT_MIN 20 | |
| #define BACKSIDE_PID_U3H_OUTPUT_MIN 20 | |
| #define BACKSIDE_PID_HISTORY_SIZE 2 | |
| struct basckside_pid_params | |
| { | |
| s32 G_d; | |
| s32 G_p; | |
| s32 G_r; | |
| s32 input_target; | |
| s32 output_min; | |
| s32 output_max; | |
| s32 interval; | |
| int additive; | |
| }; | |
| struct backside_pid_state | |
| { | |
| int ticks; | |
| struct i2c_client * monitor; | |
| s32 sample_history[BACKSIDE_PID_HISTORY_SIZE]; | |
| s32 error_history[BACKSIDE_PID_HISTORY_SIZE]; | |
| int cur_sample; | |
| s32 last_temp; | |
| int pwm; | |
| int first; | |
| }; | |
| /* | |
| * PID factors for the Drive Bay fan control loop | |
| */ | |
| #define DRIVES_FAN_RPM_DEFAULT_ID 2 | |
| #define DRIVES_FAN_RPM_INDEX 1 | |
| #define DRIVES_PID_G_d 0x01e00000 | |
| #define DRIVES_PID_G_p 0x00500000 | |
| #define DRIVES_PID_G_r 0x00000000 | |
| #define DRIVES_PID_INPUT_TARGET 0x00280000 | |
| #define DRIVES_PID_INTERVAL 5 | |
| #define DRIVES_PID_OUTPUT_MAX 4000 | |
| #define DRIVES_PID_OUTPUT_MIN 300 | |
| #define DRIVES_PID_HISTORY_SIZE 2 | |
| struct drives_pid_state | |
| { | |
| int ticks; | |
| struct i2c_client * monitor; | |
| s32 sample_history[BACKSIDE_PID_HISTORY_SIZE]; | |
| s32 error_history[BACKSIDE_PID_HISTORY_SIZE]; | |
| int cur_sample; | |
| s32 last_temp; | |
| int rpm; | |
| int first; | |
| }; | |
| #define SLOTS_FAN_PWM_DEFAULT_ID 2 | |
| #define SLOTS_FAN_PWM_INDEX 2 | |
| #define SLOTS_FAN_DEFAULT_PWM 40 /* Do better here ! */ | |
| /* | |
| * PID factors for the Xserve DIMM control loop | |
| */ | |
| #define DIMM_PID_G_d 0 | |
| #define DIMM_PID_G_p 0 | |
| #define DIMM_PID_G_r 0x06553600 | |
| #define DIMM_PID_INPUT_TARGET 3276800 | |
| #define DIMM_PID_INTERVAL 1 | |
| #define DIMM_PID_OUTPUT_MAX 14000 | |
| #define DIMM_PID_OUTPUT_MIN 4000 | |
| #define DIMM_PID_HISTORY_SIZE 20 | |
| struct dimm_pid_state | |
| { | |
| int ticks; | |
| struct i2c_client * monitor; | |
| s32 sample_history[DIMM_PID_HISTORY_SIZE]; | |
| s32 error_history[DIMM_PID_HISTORY_SIZE]; | |
| int cur_sample; | |
| s32 last_temp; | |
| int first; | |
| int output; | |
| }; | |
| /* | |
| * PID factors for the Xserve Slots control loop | |
| */ | |
| #define SLOTS_PID_G_d 0 | |
| #define SLOTS_PID_G_p 0 | |
| #define SLOTS_PID_G_r 0x00100000 | |
| #define SLOTS_PID_INPUT_TARGET 3200000 | |
| #define SLOTS_PID_INTERVAL 1 | |
| #define SLOTS_PID_OUTPUT_MAX 100 | |
| #define SLOTS_PID_OUTPUT_MIN 20 | |
| #define SLOTS_PID_HISTORY_SIZE 20 | |
| struct slots_pid_state | |
| { | |
| int ticks; | |
| struct i2c_client * monitor; | |
| s32 sample_history[SLOTS_PID_HISTORY_SIZE]; | |
| s32 error_history[SLOTS_PID_HISTORY_SIZE]; | |
| int cur_sample; | |
| s32 last_temp; | |
| int first; | |
| int pwm; | |
| }; | |
| /* Desktops */ | |
| #define CPUA_INTAKE_FAN_RPM_DEFAULT_ID 3 | |
| #define CPUA_EXHAUST_FAN_RPM_DEFAULT_ID 4 | |
| #define CPUB_INTAKE_FAN_RPM_DEFAULT_ID 5 | |
| #define CPUB_EXHAUST_FAN_RPM_DEFAULT_ID 6 | |
| #define CPUA_INTAKE_FAN_RPM_INDEX 3 | |
| #define CPUA_EXHAUST_FAN_RPM_INDEX 4 | |
| #define CPUB_INTAKE_FAN_RPM_INDEX 5 | |
| #define CPUB_EXHAUST_FAN_RPM_INDEX 6 | |
| #define CPU_INTAKE_SCALE 0x0000f852 | |
| #define CPU_TEMP_HISTORY_SIZE 2 | |
| #define CPU_POWER_HISTORY_SIZE 10 | |
| #define CPU_PID_INTERVAL 1 | |
| #define CPU_MAX_OVERTEMP 30 | |
| #define CPUA_PUMP_RPM_INDEX 7 | |
| #define CPUB_PUMP_RPM_INDEX 8 | |
| #define CPU_PUMP_OUTPUT_MAX 3200 | |
| #define CPU_PUMP_OUTPUT_MIN 1250 | |
| /* Xserve */ | |
| #define CPU_A1_FAN_RPM_INDEX 9 | |
| #define CPU_A2_FAN_RPM_INDEX 10 | |
| #define CPU_A3_FAN_RPM_INDEX 11 | |
| #define CPU_B1_FAN_RPM_INDEX 12 | |
| #define CPU_B2_FAN_RPM_INDEX 13 | |
| #define CPU_B3_FAN_RPM_INDEX 14 | |
| struct cpu_pid_state | |
| { | |
| int index; | |
| struct i2c_client * monitor; | |
| struct mpu_data mpu; | |
| int overtemp; | |
| s32 temp_history[CPU_TEMP_HISTORY_SIZE]; | |
| int cur_temp; | |
| s32 power_history[CPU_POWER_HISTORY_SIZE]; | |
| s32 error_history[CPU_POWER_HISTORY_SIZE]; | |
| int cur_power; | |
| int count_power; | |
| int rpm; | |
| int intake_rpm; | |
| s32 voltage; | |
| s32 current_a; | |
| s32 last_temp; | |
| s32 last_power; | |
| int first; | |
| u8 adc_config; | |
| s32 pump_min; | |
| s32 pump_max; | |
| }; | |
| /* Tickle FCU every 10 seconds */ | |
| #define FCU_TICKLE_TICKS 10 | |
| /* | |
| * Driver state | |
| */ | |
| enum { | |
| state_detached, | |
| state_attaching, | |
| state_attached, | |
| state_detaching, | |
| }; | |
| #endif /* __THERM_PMAC_7_2_H__ */ |