| /* DVB USB compliant Linux driver for the | |
| * - GENPIX 8pks/qpsk USB2.0 DVB-S module | |
| * | |
| * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com) | |
| * | |
| * Thanks to GENPIX for the sample code used to implement this module. | |
| * | |
| * This module is based off the vp7045 and vp702x modules | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the Free | |
| * Software Foundation, version 2. | |
| * | |
| * see Documentation/dvb/README.dvb-usb for more information | |
| */ | |
| #include "gp8psk.h" | |
| /* debug */ | |
| static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw"; | |
| int dvb_usb_gp8psk_debug; | |
| module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644); | |
| MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); | |
| int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) | |
| { | |
| int ret = 0,try = 0; | |
| if ((ret = mutex_lock_interruptible(&d->usb_mutex))) | |
| return ret; | |
| while (ret >= 0 && ret != blen && try < 3) { | |
| ret = usb_control_msg(d->udev, | |
| usb_rcvctrlpipe(d->udev,0), | |
| req, | |
| USB_TYPE_VENDOR | USB_DIR_IN, | |
| value,index,b,blen, | |
| 2000); | |
| deb_info("reading number %d (ret: %d)\n",try,ret); | |
| try++; | |
| } | |
| if (ret < 0 || ret != blen) { | |
| warn("usb in operation failed."); | |
| ret = -EIO; | |
| } else | |
| ret = 0; | |
| deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index); | |
| debug_dump(b,blen,deb_xfer); | |
| mutex_unlock(&d->usb_mutex); | |
| return ret; | |
| } | |
| int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, | |
| u16 index, u8 *b, int blen) | |
| { | |
| int ret; | |
| deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index); | |
| debug_dump(b,blen,deb_xfer); | |
| if ((ret = mutex_lock_interruptible(&d->usb_mutex))) | |
| return ret; | |
| if (usb_control_msg(d->udev, | |
| usb_sndctrlpipe(d->udev,0), | |
| req, | |
| USB_TYPE_VENDOR | USB_DIR_OUT, | |
| value,index,b,blen, | |
| 2000) != blen) { | |
| warn("usb out operation failed."); | |
| ret = -EIO; | |
| } else | |
| ret = 0; | |
| mutex_unlock(&d->usb_mutex); | |
| return ret; | |
| } | |
| static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) | |
| { | |
| int ret; | |
| const struct firmware *fw = NULL; | |
| u8 *ptr, *buf; | |
| if ((ret = request_firmware(&fw, bcm4500_firmware, | |
| &d->udev->dev)) != 0) { | |
| err("did not find the bcm4500 firmware file. (%s) " | |
| "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", | |
| bcm4500_firmware,ret); | |
| return ret; | |
| } | |
| ret = -EINVAL; | |
| if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) | |
| goto out_rel_fw; | |
| info("downloaidng bcm4500 firmware from file '%s'",bcm4500_firmware); | |
| ptr = fw->data; | |
| buf = kmalloc(512, GFP_KERNEL | GFP_DMA); | |
| while (ptr[0] != 0xff) { | |
| u16 buflen = ptr[0] + 4; | |
| if (ptr + buflen >= fw->data + fw->size) { | |
| err("failed to load bcm4500 firmware."); | |
| goto out_free; | |
| } | |
| memcpy(buf, ptr, buflen); | |
| if (dvb_usb_generic_write(d, buf, buflen)) { | |
| err("failed to load bcm4500 firmware."); | |
| goto out_free; | |
| } | |
| ptr += buflen; | |
| } | |
| ret = 0; | |
| out_free: | |
| kfree(buf); | |
| out_rel_fw: | |
| release_firmware(fw); | |
| return ret; | |
| } | |
| static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) | |
| { | |
| u8 status, buf; | |
| if (onoff) { | |
| gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1); | |
| if (! (status & 0x01)) /* started */ | |
| if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1)) | |
| return -EINVAL; | |
| if (! (status & 0x02)) /* BCM4500 firmware loaded */ | |
| if(gp8psk_load_bcm4500fw(d)) | |
| return EINVAL; | |
| if (! (status & 0x04)) /* LNB Power */ | |
| if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, | |
| &buf, 1)) | |
| return EINVAL; | |
| /* Set DVB mode */ | |
| if(gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) | |
| return -EINVAL; | |
| gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1); | |
| } else { | |
| /* Turn off LNB power */ | |
| if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) | |
| return EINVAL; | |
| /* Turn off 8psk power */ | |
| if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) | |
| { | |
| return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0); | |
| } | |
| static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap) | |
| { | |
| adap->fe = gp8psk_fe_attach(adap->dev); | |
| return 0; | |
| } | |
| static struct dvb_usb_device_properties gp8psk_properties; | |
| static int gp8psk_usb_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| return dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL); | |
| } | |
| static struct usb_device_id gp8psk_usb_table [] = { | |
| { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_COLD) }, | |
| { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_WARM) }, | |
| { 0 }, | |
| }; | |
| MODULE_DEVICE_TABLE(usb, gp8psk_usb_table); | |
| static struct dvb_usb_device_properties gp8psk_properties = { | |
| .usb_ctrl = CYPRESS_FX2, | |
| .firmware = "dvb-usb-gp8psk-01.fw", | |
| .num_adapters = 1, | |
| .adapter = { | |
| { | |
| .streaming_ctrl = gp8psk_streaming_ctrl, | |
| .frontend_attach = gp8psk_frontend_attach, | |
| /* parameter for the MPEG2-data transfer */ | |
| .stream = { | |
| .type = USB_BULK, | |
| .count = 7, | |
| .endpoint = 0x82, | |
| .u = { | |
| .bulk = { | |
| .buffersize = 8192, | |
| } | |
| } | |
| }, | |
| } | |
| }, | |
| .power_ctrl = gp8psk_power_ctrl, | |
| .generic_bulk_ctrl_endpoint = 0x01, | |
| .num_device_descs = 1, | |
| .devices = { | |
| { .name = "Genpix 8PSK-USB DVB-S USB2.0 receiver", | |
| .cold_ids = { &gp8psk_usb_table[0], NULL }, | |
| .warm_ids = { &gp8psk_usb_table[1], NULL }, | |
| }, | |
| { NULL }, | |
| } | |
| }; | |
| /* usb specific object needed to register this driver with the usb subsystem */ | |
| static struct usb_driver gp8psk_usb_driver = { | |
| .name = "dvb_usb_gp8psk", | |
| .probe = gp8psk_usb_probe, | |
| .disconnect = dvb_usb_device_exit, | |
| .id_table = gp8psk_usb_table, | |
| }; | |
| /* module stuff */ | |
| static int __init gp8psk_usb_module_init(void) | |
| { | |
| int result; | |
| if ((result = usb_register(&gp8psk_usb_driver))) { | |
| err("usb_register failed. (%d)",result); | |
| return result; | |
| } | |
| return 0; | |
| } | |
| static void __exit gp8psk_usb_module_exit(void) | |
| { | |
| /* deregister this driver from the USB subsystem */ | |
| usb_deregister(&gp8psk_usb_driver); | |
| } | |
| module_init(gp8psk_usb_module_init); | |
| module_exit(gp8psk_usb_module_exit); | |
| MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>"); | |
| MODULE_DESCRIPTION("Driver for Genpix 8psk-USB DVB-S USB2.0"); | |
| MODULE_VERSION("1.0"); | |
| MODULE_LICENSE("GPL"); |