| /* | |
| * bt856 - BT856A Digital Video Encoder (Rockwell Part) | |
| * | |
| * Copyright (C) 1999 Mike Bernson <mike@mlb.org> | |
| * Copyright (C) 1998 Dave Perks <dperks@ibm.net> | |
| * | |
| * Modifications for LML33/DC10plus unified driver | |
| * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> | |
| * | |
| * This code was modify/ported from the saa7111 driver written | |
| * by Dave Perks. | |
| * | |
| * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net> | |
| * - moved over to linux>=2.4.x i2c protocol (9/9/2002) | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/delay.h> | |
| #include <linux/errno.h> | |
| #include <linux/fs.h> | |
| #include <linux/kernel.h> | |
| #include <linux/major.h> | |
| #include <linux/slab.h> | |
| #include <linux/mm.h> | |
| #include <linux/pci.h> | |
| #include <linux/signal.h> | |
| #include <asm/io.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/page.h> | |
| #include <linux/sched.h> | |
| #include <linux/types.h> | |
| #include <linux/videodev.h> | |
| #include <asm/uaccess.h> | |
| MODULE_DESCRIPTION("Brooktree-856A video encoder driver"); | |
| MODULE_AUTHOR("Mike Bernson & Dave Perks"); | |
| MODULE_LICENSE("GPL"); | |
| #include <linux/i2c.h> | |
| #define I2C_NAME(s) (s)->name | |
| #include <linux/video_encoder.h> | |
| static int debug = 0; | |
| module_param(debug, int, 0); | |
| MODULE_PARM_DESC(debug, "Debug level (0-1)"); | |
| #define dprintk(num, format, args...) \ | |
| do { \ | |
| if (debug >= num) \ | |
| printk(format, ##args); \ | |
| } while (0) | |
| /* ----------------------------------------------------------------------- */ | |
| #define REG_OFFSET 0xDA | |
| #define BT856_NR_REG 6 | |
| struct bt856 { | |
| unsigned char reg[BT856_NR_REG]; | |
| int norm; | |
| int enable; | |
| }; | |
| #define I2C_BT856 0x88 | |
| /* ----------------------------------------------------------------------- */ | |
| static inline int | |
| bt856_write (struct i2c_client *client, | |
| u8 reg, | |
| u8 value) | |
| { | |
| struct bt856 *encoder = i2c_get_clientdata(client); | |
| encoder->reg[reg - REG_OFFSET] = value; | |
| return i2c_smbus_write_byte_data(client, reg, value); | |
| } | |
| static inline int | |
| bt856_setbit (struct i2c_client *client, | |
| u8 reg, | |
| u8 bit, | |
| u8 value) | |
| { | |
| struct bt856 *encoder = i2c_get_clientdata(client); | |
| return bt856_write(client, reg, | |
| (encoder-> | |
| reg[reg - REG_OFFSET] & ~(1 << bit)) | | |
| (value ? (1 << bit) : 0)); | |
| } | |
| static void | |
| bt856_dump (struct i2c_client *client) | |
| { | |
| int i; | |
| struct bt856 *encoder = i2c_get_clientdata(client); | |
| printk(KERN_INFO "%s: register dump:", I2C_NAME(client)); | |
| for (i = 0; i < BT856_NR_REG; i += 2) | |
| printk(" %02x", encoder->reg[i]); | |
| printk("\n"); | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| static int | |
| bt856_command (struct i2c_client *client, | |
| unsigned int cmd, | |
| void *arg) | |
| { | |
| struct bt856 *encoder = i2c_get_clientdata(client); | |
| switch (cmd) { | |
| case 0: | |
| /* This is just for testing!!! */ | |
| dprintk(1, KERN_INFO "bt856: init\n"); | |
| bt856_write(client, 0xdc, 0x18); | |
| bt856_write(client, 0xda, 0); | |
| bt856_write(client, 0xde, 0); | |
| bt856_setbit(client, 0xdc, 3, 1); | |
| //bt856_setbit(client, 0xdc, 6, 0); | |
| bt856_setbit(client, 0xdc, 4, 1); | |
| switch (encoder->norm) { | |
| case VIDEO_MODE_NTSC: | |
| bt856_setbit(client, 0xdc, 2, 0); | |
| break; | |
| case VIDEO_MODE_PAL: | |
| bt856_setbit(client, 0xdc, 2, 1); | |
| break; | |
| } | |
| bt856_setbit(client, 0xdc, 1, 1); | |
| bt856_setbit(client, 0xde, 4, 0); | |
| bt856_setbit(client, 0xde, 3, 1); | |
| if (debug != 0) | |
| bt856_dump(client); | |
| break; | |
| case ENCODER_GET_CAPABILITIES: | |
| { | |
| struct video_encoder_capability *cap = arg; | |
| dprintk(1, KERN_INFO "%s: get capabilities\n", | |
| I2C_NAME(client)); | |
| cap->flags = VIDEO_ENCODER_PAL | | |
| VIDEO_ENCODER_NTSC | | |
| VIDEO_ENCODER_CCIR; | |
| cap->inputs = 2; | |
| cap->outputs = 1; | |
| } | |
| break; | |
| case ENCODER_SET_NORM: | |
| { | |
| int *iarg = arg; | |
| dprintk(1, KERN_INFO "%s: set norm %d\n", I2C_NAME(client), | |
| *iarg); | |
| switch (*iarg) { | |
| case VIDEO_MODE_NTSC: | |
| bt856_setbit(client, 0xdc, 2, 0); | |
| break; | |
| case VIDEO_MODE_PAL: | |
| bt856_setbit(client, 0xdc, 2, 1); | |
| bt856_setbit(client, 0xda, 0, 0); | |
| //bt856_setbit(client, 0xda, 0, 1); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| encoder->norm = *iarg; | |
| if (debug != 0) | |
| bt856_dump(client); | |
| } | |
| break; | |
| case ENCODER_SET_INPUT: | |
| { | |
| int *iarg = arg; | |
| dprintk(1, KERN_INFO "%s: set input %d\n", I2C_NAME(client), | |
| *iarg); | |
| /* We only have video bus. | |
| * iarg = 0: input is from bt819 | |
| * iarg = 1: input is from ZR36060 */ | |
| switch (*iarg) { | |
| case 0: | |
| bt856_setbit(client, 0xde, 4, 0); | |
| bt856_setbit(client, 0xde, 3, 1); | |
| bt856_setbit(client, 0xdc, 3, 1); | |
| bt856_setbit(client, 0xdc, 6, 0); | |
| break; | |
| case 1: | |
| bt856_setbit(client, 0xde, 4, 0); | |
| bt856_setbit(client, 0xde, 3, 1); | |
| bt856_setbit(client, 0xdc, 3, 1); | |
| bt856_setbit(client, 0xdc, 6, 1); | |
| break; | |
| case 2: // Color bar | |
| bt856_setbit(client, 0xdc, 3, 0); | |
| bt856_setbit(client, 0xde, 4, 1); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (debug != 0) | |
| bt856_dump(client); | |
| } | |
| break; | |
| case ENCODER_SET_OUTPUT: | |
| { | |
| int *iarg = arg; | |
| dprintk(1, KERN_INFO "%s: set output %d\n", I2C_NAME(client), | |
| *iarg); | |
| /* not much choice of outputs */ | |
| if (*iarg != 0) { | |
| return -EINVAL; | |
| } | |
| } | |
| break; | |
| case ENCODER_ENABLE_OUTPUT: | |
| { | |
| int *iarg = arg; | |
| encoder->enable = !!*iarg; | |
| dprintk(1, KERN_INFO "%s: enable output %d\n", | |
| I2C_NAME(client), encoder->enable); | |
| } | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| /* | |
| * Generic i2c probe | |
| * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' | |
| */ | |
| static unsigned short normal_i2c[] = { I2C_BT856 >> 1, I2C_CLIENT_END }; | |
| static unsigned short ignore = I2C_CLIENT_END; | |
| static struct i2c_client_address_data addr_data = { | |
| .normal_i2c = normal_i2c, | |
| .probe = &ignore, | |
| .ignore = &ignore, | |
| }; | |
| static struct i2c_driver i2c_driver_bt856; | |
| static int | |
| bt856_detect_client (struct i2c_adapter *adapter, | |
| int address, | |
| int kind) | |
| { | |
| int i; | |
| struct i2c_client *client; | |
| struct bt856 *encoder; | |
| dprintk(1, | |
| KERN_INFO | |
| "bt856.c: detecting bt856 client on address 0x%x\n", | |
| address << 1); | |
| /* Check if the adapter supports the needed features */ | |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
| return 0; | |
| client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); | |
| if (client == 0) | |
| return -ENOMEM; | |
| client->addr = address; | |
| client->adapter = adapter; | |
| client->driver = &i2c_driver_bt856; | |
| strlcpy(I2C_NAME(client), "bt856", sizeof(I2C_NAME(client))); | |
| encoder = kzalloc(sizeof(struct bt856), GFP_KERNEL); | |
| if (encoder == NULL) { | |
| kfree(client); | |
| return -ENOMEM; | |
| } | |
| encoder->norm = VIDEO_MODE_NTSC; | |
| encoder->enable = 1; | |
| i2c_set_clientdata(client, encoder); | |
| i = i2c_attach_client(client); | |
| if (i) { | |
| kfree(client); | |
| kfree(encoder); | |
| return i; | |
| } | |
| bt856_write(client, 0xdc, 0x18); | |
| bt856_write(client, 0xda, 0); | |
| bt856_write(client, 0xde, 0); | |
| bt856_setbit(client, 0xdc, 3, 1); | |
| //bt856_setbit(client, 0xdc, 6, 0); | |
| bt856_setbit(client, 0xdc, 4, 1); | |
| switch (encoder->norm) { | |
| case VIDEO_MODE_NTSC: | |
| bt856_setbit(client, 0xdc, 2, 0); | |
| break; | |
| case VIDEO_MODE_PAL: | |
| bt856_setbit(client, 0xdc, 2, 1); | |
| break; | |
| } | |
| bt856_setbit(client, 0xdc, 1, 1); | |
| bt856_setbit(client, 0xde, 4, 0); | |
| bt856_setbit(client, 0xde, 3, 1); | |
| if (debug != 0) | |
| bt856_dump(client); | |
| dprintk(1, KERN_INFO "%s_attach: at address 0x%x\n", I2C_NAME(client), | |
| client->addr << 1); | |
| return 0; | |
| } | |
| static int | |
| bt856_attach_adapter (struct i2c_adapter *adapter) | |
| { | |
| dprintk(1, | |
| KERN_INFO | |
| "bt856.c: starting probe for adapter %s (0x%x)\n", | |
| I2C_NAME(adapter), adapter->id); | |
| return i2c_probe(adapter, &addr_data, &bt856_detect_client); | |
| } | |
| static int | |
| bt856_detach_client (struct i2c_client *client) | |
| { | |
| struct bt856 *encoder = i2c_get_clientdata(client); | |
| int err; | |
| err = i2c_detach_client(client); | |
| if (err) { | |
| return err; | |
| } | |
| kfree(encoder); | |
| kfree(client); | |
| return 0; | |
| } | |
| /* ----------------------------------------------------------------------- */ | |
| static struct i2c_driver i2c_driver_bt856 = { | |
| .driver = { | |
| .name = "bt856", | |
| }, | |
| .id = I2C_DRIVERID_BT856, | |
| .attach_adapter = bt856_attach_adapter, | |
| .detach_client = bt856_detach_client, | |
| .command = bt856_command, | |
| }; | |
| static int __init | |
| bt856_init (void) | |
| { | |
| return i2c_add_driver(&i2c_driver_bt856); | |
| } | |
| static void __exit | |
| bt856_exit (void) | |
| { | |
| i2c_del_driver(&i2c_driver_bt856); | |
| } | |
| module_init(bt856_init); | |
| module_exit(bt856_exit); |