| /* | |
| mxb - v4l2 driver for the Multimedia eXtension Board | |
| Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de> | |
| Visit http://www.mihu.de/linux/saa7146/mxb/ | |
| for further details about this card. | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; if not, write to the Free Software | |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #define DEBUG_VARIABLE debug | |
| #include <media/saa7146_vv.h> | |
| #include <media/tuner.h> | |
| #include <linux/video_decoder.h> | |
| #include <media/v4l2-common.h> | |
| #include "mxb.h" | |
| #include "tea6415c.h" | |
| #include "tea6420.h" | |
| #include "tda9840.h" | |
| #define I2C_SAA7111 0x24 | |
| #define MXB_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) | |
| /* global variable */ | |
| static int mxb_num = 0; | |
| /* initial frequence the tuner will be tuned to. | |
| in verden (lower saxony, germany) 4148 is a | |
| channel called "phoenix" */ | |
| static int freq = 4148; | |
| module_param(freq, int, 0644); | |
| MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup"); | |
| static int debug = 0; | |
| module_param(debug, int, 0644); | |
| MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); | |
| #define MXB_INPUTS 4 | |
| enum { TUNER, AUX1, AUX3, AUX3_YC }; | |
| static struct v4l2_input mxb_inputs[MXB_INPUTS] = { | |
| { TUNER, "Tuner", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, | |
| { AUX1, "AUX1", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, | |
| { AUX3, "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, | |
| { AUX3_YC, "AUX3 S-Video", V4L2_INPUT_TYPE_CAMERA, 4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, | |
| }; | |
| /* this array holds the information, which port of the saa7146 each | |
| input actually uses. the mxb uses port 0 for every input */ | |
| static struct { | |
| int hps_source; | |
| int hps_sync; | |
| } input_port_selection[MXB_INPUTS] = { | |
| { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, | |
| { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, | |
| { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, | |
| { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, | |
| }; | |
| /* this array holds the information of the audio source (mxb_audios), | |
| which has to be switched corresponding to the video source (mxb_channels) */ | |
| static int video_audio_connect[MXB_INPUTS] = | |
| { 0, 1, 3, 3 }; | |
| /* these are the necessary input-output-pins for bringing one audio source | |
| (see above) to the CD-output */ | |
| static struct tea6420_multiplex TEA6420_cd[MXB_AUDIOS+1][2] = | |
| { | |
| {{1,1,0},{1,1,0}}, /* Tuner */ | |
| {{5,1,0},{6,1,0}}, /* AUX 1 */ | |
| {{4,1,0},{6,1,0}}, /* AUX 2 */ | |
| {{3,1,0},{6,1,0}}, /* AUX 3 */ | |
| {{1,1,0},{3,1,0}}, /* Radio */ | |
| {{1,1,0},{2,1,0}}, /* CD-Rom */ | |
| {{6,1,0},{6,1,0}} /* Mute */ | |
| }; | |
| /* these are the necessary input-output-pins for bringing one audio source | |
| (see above) to the line-output */ | |
| static struct tea6420_multiplex TEA6420_line[MXB_AUDIOS+1][2] = | |
| { | |
| {{2,3,0},{1,2,0}}, | |
| {{5,3,0},{6,2,0}}, | |
| {{4,3,0},{6,2,0}}, | |
| {{3,3,0},{6,2,0}}, | |
| {{2,3,0},{3,2,0}}, | |
| {{2,3,0},{2,2,0}}, | |
| {{6,3,0},{6,2,0}} /* Mute */ | |
| }; | |
| #define MAXCONTROLS 1 | |
| static struct v4l2_queryctrl mxb_controls[] = { | |
| { V4L2_CID_AUDIO_MUTE, V4L2_CTRL_TYPE_BOOLEAN, "Mute", 0, 1, 1, 0, 0 }, | |
| }; | |
| static struct saa7146_extension_ioctls ioctls[] = { | |
| { VIDIOC_ENUMINPUT, SAA7146_EXCLUSIVE }, | |
| { VIDIOC_G_INPUT, SAA7146_EXCLUSIVE }, | |
| { VIDIOC_S_INPUT, SAA7146_EXCLUSIVE }, | |
| { VIDIOC_QUERYCTRL, SAA7146_BEFORE }, | |
| { VIDIOC_G_CTRL, SAA7146_BEFORE }, | |
| { VIDIOC_S_CTRL, SAA7146_BEFORE }, | |
| { VIDIOC_G_TUNER, SAA7146_EXCLUSIVE }, | |
| { VIDIOC_S_TUNER, SAA7146_EXCLUSIVE }, | |
| { VIDIOC_G_FREQUENCY, SAA7146_EXCLUSIVE }, | |
| { VIDIOC_S_FREQUENCY, SAA7146_EXCLUSIVE }, | |
| { VIDIOC_G_AUDIO, SAA7146_EXCLUSIVE }, | |
| { VIDIOC_S_AUDIO, SAA7146_EXCLUSIVE }, | |
| { MXB_S_AUDIO_CD, SAA7146_EXCLUSIVE }, /* custom control */ | |
| { MXB_S_AUDIO_LINE, SAA7146_EXCLUSIVE }, /* custom control */ | |
| { 0, 0 } | |
| }; | |
| struct mxb | |
| { | |
| struct video_device *video_dev; | |
| struct video_device *vbi_dev; | |
| struct i2c_adapter i2c_adapter; | |
| struct i2c_client* saa7111a; | |
| struct i2c_client* tda9840; | |
| struct i2c_client* tea6415c; | |
| struct i2c_client* tuner; | |
| struct i2c_client* tea6420_1; | |
| struct i2c_client* tea6420_2; | |
| int cur_mode; /* current audio mode (mono, stereo, ...) */ | |
| int cur_input; /* current input */ | |
| int cur_mute; /* current mute status */ | |
| struct v4l2_frequency cur_freq; /* current frequency the tuner is tuned to */ | |
| }; | |
| static struct saa7146_extension extension; | |
| static int mxb_probe(struct saa7146_dev* dev) | |
| { | |
| struct mxb* mxb = NULL; | |
| struct i2c_client *client; | |
| struct list_head *item; | |
| int result; | |
| if ((result = request_module("saa7111")) < 0) { | |
| printk("mxb: saa7111 i2c module not available.\n"); | |
| return -ENODEV; | |
| } | |
| if ((result = request_module("tuner")) < 0) { | |
| printk("mxb: tuner i2c module not available.\n"); | |
| return -ENODEV; | |
| } | |
| if ((result = request_module("tea6420")) < 0) { | |
| printk("mxb: tea6420 i2c module not available.\n"); | |
| return -ENODEV; | |
| } | |
| if ((result = request_module("tea6415c")) < 0) { | |
| printk("mxb: tea6415c i2c module not available.\n"); | |
| return -ENODEV; | |
| } | |
| if ((result = request_module("tda9840")) < 0) { | |
| printk("mxb: tda9840 i2c module not available.\n"); | |
| return -ENODEV; | |
| } | |
| mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL); | |
| if( NULL == mxb ) { | |
| DEB_D(("not enough kernel memory.\n")); | |
| return -ENOMEM; | |
| } | |
| mxb->i2c_adapter = (struct i2c_adapter) { | |
| .class = I2C_CLASS_TV_ANALOG, | |
| .name = "mxb", | |
| }; | |
| saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); | |
| if(i2c_add_adapter(&mxb->i2c_adapter) < 0) { | |
| DEB_S(("cannot register i2c-device. skipping.\n")); | |
| kfree(mxb); | |
| return -EFAULT; | |
| } | |
| /* loop through all i2c-devices on the bus and look who is there */ | |
| list_for_each(item,&mxb->i2c_adapter.clients) { | |
| client = list_entry(item, struct i2c_client, list); | |
| if( I2C_ADDR_TEA6420_1 == client->addr ) | |
| mxb->tea6420_1 = client; | |
| if( I2C_ADDR_TEA6420_2 == client->addr ) | |
| mxb->tea6420_2 = client; | |
| if( I2C_TEA6415C_2 == client->addr ) | |
| mxb->tea6415c = client; | |
| if( I2C_ADDR_TDA9840 == client->addr ) | |
| mxb->tda9840 = client; | |
| if( I2C_SAA7111 == client->addr ) | |
| mxb->saa7111a = client; | |
| if( 0x60 == client->addr ) | |
| mxb->tuner = client; | |
| } | |
| /* check if all devices are present */ | |
| if( 0 == mxb->tea6420_1 || 0 == mxb->tea6420_2 || 0 == mxb->tea6415c | |
| || 0 == mxb->tda9840 || 0 == mxb->saa7111a || 0 == mxb->tuner ) { | |
| printk("mxb: did not find all i2c devices. aborting\n"); | |
| i2c_del_adapter(&mxb->i2c_adapter); | |
| kfree(mxb); | |
| return -ENODEV; | |
| } | |
| /* all devices are present, probe was successful */ | |
| /* we store the pointer in our private data field */ | |
| dev->ext_priv = mxb; | |
| return 0; | |
| } | |
| /* some init data for the saa7740, the so-called 'sound arena module'. | |
| there are no specs available, so we simply use some init values */ | |
| static struct { | |
| int length; | |
| char data[9]; | |
| } mxb_saa7740_init[] = { | |
| { 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } }, | |
| { 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } }, | |
| { 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } }, | |
| { 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } }, | |
| { 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } }, | |
| { 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } }, | |
| { 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } }, | |
| { 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } }, | |
| { 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } }, | |
| { 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } }, | |
| { 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } }, | |
| { 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } }, | |
| { 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } }, | |
| { 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } }, | |
| { 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } }, | |
| { 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } }, | |
| { 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } }, | |
| { 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } }, | |
| { 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } }, | |
| { 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } }, | |
| { 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } }, | |
| { 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } }, | |
| { 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } }, | |
| { 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } }, | |
| { 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } }, | |
| { 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } }, | |
| { 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } }, | |
| { 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } }, | |
| { 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } }, | |
| { 3, { 0x48, 0x00, 0x01 } }, | |
| { 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } }, | |
| { 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } }, | |
| { 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } }, | |
| { 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } }, | |
| { 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } }, | |
| { 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } }, | |
| { 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } }, | |
| { 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } }, | |
| { 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } }, | |
| { 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } }, | |
| { 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } }, | |
| { 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } }, | |
| { 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } }, | |
| { 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } }, | |
| { 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, | |
| { 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, | |
| { 3, { 0x80, 0xb3, 0x0a } }, | |
| {-1, { 0} } | |
| }; | |
| static const unsigned char mxb_saa7111_init[] = { | |
| 0x00, 0x00, /* 00 - ID byte */ | |
| 0x01, 0x00, /* 01 - reserved */ | |
| /*front end */ | |
| 0x02, 0xd8, /* 02 - FUSE=x, GUDL=x, MODE=x */ | |
| 0x03, 0x23, /* 03 - HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, GAFIX=0, GAI1=256, GAI2=256 */ | |
| 0x04, 0x00, /* 04 - GAI1=256 */ | |
| 0x05, 0x00, /* 05 - GAI2=256 */ | |
| /* decoder */ | |
| 0x06, 0xf0, /* 06 - HSB at xx(50Hz) / xx(60Hz) pixels after end of last line */ | |
| 0x07, 0x30, /* 07 - HSS at xx(50Hz) / xx(60Hz) pixels after end of last line */ | |
| 0x08, 0xa8, /* 08 - AUFD=x, FSEL=x, EXFIL=x, VTRC=x, HPLL=x, VNOI=x */ | |
| 0x09, 0x02, /* 09 - BYPS=x, PREF=x, BPSS=x, VBLB=x, UPTCV=x, APER=x */ | |
| 0x0a, 0x80, /* 0a - BRIG=128 */ | |
| 0x0b, 0x47, /* 0b - CONT=1.109 */ | |
| 0x0c, 0x40, /* 0c - SATN=1.0 */ | |
| 0x0d, 0x00, /* 0d - HUE=0 */ | |
| 0x0e, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, FCTC=0, CHBW=1 */ | |
| 0x0f, 0x00, /* 0f - reserved */ | |
| 0x10, 0xd0, /* 10 - OFTS=x, HDEL=x, VRLN=x, YDEL=x */ | |
| 0x11, 0x8c, /* 11 - GPSW=x, CM99=x, FECO=x, COMPO=x, OEYC=1, OEHV=1, VIPB=0, COLO=0 */ | |
| 0x12, 0x80, /* 12 - xx output control 2 */ | |
| 0x13, 0x30, /* 13 - xx output control 3 */ | |
| 0x14, 0x00, /* 14 - reserved */ | |
| 0x15, 0x15, /* 15 - VBI */ | |
| 0x16, 0x04, /* 16 - VBI */ | |
| 0x17, 0x00, /* 17 - VBI */ | |
| }; | |
| /* bring hardware to a sane state. this has to be done, just in case someone | |
| wants to capture from this device before it has been properly initialized. | |
| the capture engine would badly fail, because no valid signal arrives on the | |
| saa7146, thus leading to timeouts and stuff. */ | |
| static int mxb_init_done(struct saa7146_dev* dev) | |
| { | |
| struct mxb* mxb = (struct mxb*)dev->ext_priv; | |
| struct video_decoder_init init; | |
| struct i2c_msg msg; | |
| struct tuner_setup tun_setup; | |
| v4l2_std_id std = V4L2_STD_PAL_BG; | |
| int i = 0, err = 0; | |
| struct tea6415c_multiplex vm; | |
| /* select video mode in saa7111a */ | |
| i = VIDEO_MODE_PAL; | |
| /* fixme: currently pointless: gets overwritten by configuration below */ | |
| mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_NORM, &i); | |
| /* write configuration to saa7111a */ | |
| init.data = mxb_saa7111_init; | |
| init.len = sizeof(mxb_saa7111_init); | |
| mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_INIT, &init); | |
| /* select tuner-output on saa7111a */ | |
| i = 0; | |
| mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_INPUT, &i); | |
| /* enable vbi bypass */ | |
| i = 1; | |
| mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_VBI_BYPASS, &i); | |
| /* select a tuner type */ | |
| tun_setup.mode_mask = T_ANALOG_TV; | |
| tun_setup.addr = ADDR_UNSET; | |
| tun_setup.type = TUNER_PHILIPS_PAL; | |
| mxb->tuner->driver->command(mxb->tuner,TUNER_SET_TYPE_ADDR, &tun_setup); | |
| /* tune in some frequency on tuner */ | |
| mxb->cur_freq.tuner = 0; | |
| mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV; | |
| mxb->cur_freq.frequency = freq; | |
| mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_FREQUENCY, | |
| &mxb->cur_freq); | |
| /* set a default video standard */ | |
| mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); | |
| /* mute audio on tea6420s */ | |
| mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]); | |
| mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]); | |
| mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_cd[6][0]); | |
| mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_cd[6][1]); | |
| /* switch to tuner-channel on tea6415c*/ | |
| vm.out = 17; | |
| vm.in = 3; | |
| mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm); | |
| /* select tuner-output on multicable on tea6415c*/ | |
| vm.in = 3; | |
| vm.out = 13; | |
| mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm); | |
| /* the rest for mxb */ | |
| mxb->cur_input = 0; | |
| mxb->cur_mute = 1; | |
| mxb->cur_mode = V4L2_TUNER_MODE_STEREO; | |
| mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &mxb->cur_mode); | |
| /* check if the saa7740 (aka 'sound arena module') is present | |
| on the mxb. if so, we must initialize it. due to lack of | |
| informations about the saa7740, the values were reverse | |
| engineered. */ | |
| msg.addr = 0x1b; | |
| msg.flags = 0; | |
| msg.len = mxb_saa7740_init[0].length; | |
| msg.buf = &mxb_saa7740_init[0].data[0]; | |
| if( 1 == (err = i2c_transfer(&mxb->i2c_adapter, &msg, 1))) { | |
| /* the sound arena module is a pos, that's probably the reason | |
| philips refuses to hand out a datasheet for the saa7740... | |
| it seems to screw up the i2c bus, so we disable fast irq | |
| based i2c transactions here and rely on the slow and safe | |
| polling method ... */ | |
| extension.flags &= ~SAA7146_USE_I2C_IRQ; | |
| for(i = 1;;i++) { | |
| if( -1 == mxb_saa7740_init[i].length ) { | |
| break; | |
| } | |
| msg.len = mxb_saa7740_init[i].length; | |
| msg.buf = &mxb_saa7740_init[i].data[0]; | |
| if( 1 != (err = i2c_transfer(&mxb->i2c_adapter, &msg, 1))) { | |
| DEB_D(("failed to initialize 'sound arena module'.\n")); | |
| goto err; | |
| } | |
| } | |
| INFO(("'sound arena module' detected.\n")); | |
| } | |
| err: | |
| /* the rest for saa7146: you should definitely set some basic values | |
| for the input-port handling of the saa7146. */ | |
| /* ext->saa has been filled by the core driver */ | |
| /* some stuff is done via variables */ | |
| saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, input_port_selection[mxb->cur_input].hps_sync); | |
| /* some stuff is done via direct write to the registers */ | |
| /* this is ugly, but because of the fact that this is completely | |
| hardware dependend, it should be done directly... */ | |
| saa7146_write(dev, DD1_STREAM_B, 0x00000000); | |
| saa7146_write(dev, DD1_INIT, 0x02000200); | |
| saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); | |
| return 0; | |
| } | |
| /* interrupt-handler. this gets called when irq_mask is != 0. | |
| it must clear the interrupt-bits in irq_mask it has handled */ | |
| /* | |
| void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask) | |
| { | |
| struct mxb* mxb = (struct mxb*)dev->ext_priv; | |
| } | |
| */ | |
| static struct saa7146_ext_vv vv_data; | |
| /* this function only gets called when the probing was successful */ | |
| static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) | |
| { | |
| struct mxb* mxb = (struct mxb*)dev->ext_priv; | |
| DEB_EE(("dev:%p\n",dev)); | |
| /* checking for i2c-devices can be omitted here, because we | |
| already did this in "mxb_vl42_probe" */ | |
| saa7146_vv_init(dev,&vv_data); | |
| if( 0 != saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) { | |
| ERR(("cannot register capture v4l2 device. skipping.\n")); | |
| return -1; | |
| } | |
| /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ | |
| if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) { | |
| if( 0 != saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) { | |
| ERR(("cannot register vbi v4l2 device. skipping.\n")); | |
| } | |
| } | |
| i2c_use_client(mxb->tea6420_1); | |
| i2c_use_client(mxb->tea6420_2); | |
| i2c_use_client(mxb->tea6415c); | |
| i2c_use_client(mxb->tda9840); | |
| i2c_use_client(mxb->saa7111a); | |
| i2c_use_client(mxb->tuner); | |
| printk("mxb: found 'Multimedia eXtension Board'-%d.\n",mxb_num); | |
| mxb_num++; | |
| mxb_init_done(dev); | |
| return 0; | |
| } | |
| static int mxb_detach(struct saa7146_dev* dev) | |
| { | |
| struct mxb* mxb = (struct mxb*)dev->ext_priv; | |
| DEB_EE(("dev:%p\n",dev)); | |
| i2c_release_client(mxb->tea6420_1); | |
| i2c_release_client(mxb->tea6420_2); | |
| i2c_release_client(mxb->tea6415c); | |
| i2c_release_client(mxb->tda9840); | |
| i2c_release_client(mxb->saa7111a); | |
| i2c_release_client(mxb->tuner); | |
| saa7146_unregister_device(&mxb->video_dev,dev); | |
| if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) { | |
| saa7146_unregister_device(&mxb->vbi_dev,dev); | |
| } | |
| saa7146_vv_release(dev); | |
| mxb_num--; | |
| i2c_del_adapter(&mxb->i2c_adapter); | |
| kfree(mxb); | |
| return 0; | |
| } | |
| static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) | |
| { | |
| struct saa7146_dev *dev = fh->dev; | |
| struct mxb* mxb = (struct mxb*)dev->ext_priv; | |
| struct saa7146_vv *vv = dev->vv_data; | |
| switch(cmd) { | |
| case VIDIOC_ENUMINPUT: | |
| { | |
| struct v4l2_input *i = arg; | |
| DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index)); | |
| if( i->index < 0 || i->index >= MXB_INPUTS) { | |
| return -EINVAL; | |
| } | |
| memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input)); | |
| return 0; | |
| } | |
| /* the saa7146 provides some controls (brightness, contrast, saturation) | |
| which gets registered *after* this function. because of this we have | |
| to return with a value != 0 even if the function succeded.. */ | |
| case VIDIOC_QUERYCTRL: | |
| { | |
| struct v4l2_queryctrl *qc = arg; | |
| int i; | |
| for (i = MAXCONTROLS - 1; i >= 0; i--) { | |
| if (mxb_controls[i].id == qc->id) { | |
| *qc = mxb_controls[i]; | |
| DEB_D(("VIDIOC_QUERYCTRL %d.\n",qc->id)); | |
| return 0; | |
| } | |
| } | |
| return -EAGAIN; | |
| } | |
| case VIDIOC_G_CTRL: | |
| { | |
| struct v4l2_control *vc = arg; | |
| int i; | |
| for (i = MAXCONTROLS - 1; i >= 0; i--) { | |
| if (mxb_controls[i].id == vc->id) { | |
| break; | |
| } | |
| } | |
| if( i < 0 ) { | |
| return -EAGAIN; | |
| } | |
| switch (vc->id ) { | |
| case V4L2_CID_AUDIO_MUTE: { | |
| vc->value = mxb->cur_mute; | |
| DEB_D(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n",vc->value)); | |
| return 0; | |
| } | |
| } | |
| DEB_EE(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n",vc->value)); | |
| return 0; | |
| } | |
| case VIDIOC_S_CTRL: | |
| { | |
| struct v4l2_control *vc = arg; | |
| int i = 0; | |
| for (i = MAXCONTROLS - 1; i >= 0; i--) { | |
| if (mxb_controls[i].id == vc->id) { | |
| break; | |
| } | |
| } | |
| if( i < 0 ) { | |
| return -EAGAIN; | |
| } | |
| switch (vc->id ) { | |
| case V4L2_CID_AUDIO_MUTE: { | |
| mxb->cur_mute = vc->value; | |
| if( 0 == vc->value ) { | |
| /* switch the audio-source */ | |
| mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[mxb->cur_input]][0]); | |
| mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[mxb->cur_input]][1]); | |
| } else { | |
| mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]); | |
| mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]); | |
| } | |
| DEB_EE(("VIDIOC_S_CTRL, V4L2_CID_AUDIO_MUTE: %d.\n",vc->value)); | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| case VIDIOC_G_INPUT: | |
| { | |
| int *input = (int *)arg; | |
| *input = mxb->cur_input; | |
| DEB_EE(("VIDIOC_G_INPUT %d.\n",*input)); | |
| return 0; | |
| } | |
| case VIDIOC_S_INPUT: | |
| { | |
| int input = *(int *)arg; | |
| struct tea6415c_multiplex vm; | |
| int i = 0; | |
| DEB_EE(("VIDIOC_S_INPUT %d.\n",input)); | |
| if (input < 0 || input >= MXB_INPUTS) { | |
| return -EINVAL; | |
| } | |
| /* fixme: locke das setzen des inputs mit hilfe des mutexes | |
| mutex_lock(&dev->lock); | |
| video_mux(dev,*i); | |
| mutex_unlock(&dev->lock); | |
| */ | |
| /* fixme: check if streaming capture | |
| if ( 0 != dev->streaming ) { | |
| DEB_D(("VIDIOC_S_INPUT illegal while streaming.\n")); | |
| return -EPERM; | |
| } | |
| */ | |
| mxb->cur_input = input; | |
| saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync); | |
| /* prepare switching of tea6415c and saa7111a; | |
| have a look at the 'background'-file for further informations */ | |
| switch( input ) { | |
| case TUNER: | |
| { | |
| i = 0; | |
| vm.in = 3; | |
| vm.out = 17; | |
| if ( 0 != mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm)) { | |
| printk("VIDIOC_S_INPUT: could not address tea6415c #1\n"); | |
| return -EFAULT; | |
| } | |
| /* connect tuner-output always to multicable */ | |
| vm.in = 3; | |
| vm.out = 13; | |
| break; | |
| } | |
| case AUX3_YC: | |
| { | |
| /* nothing to be done here. aux3_yc is | |
| directly connected to the saa711a */ | |
| i = 5; | |
| break; | |
| } | |
| case AUX3: | |
| { | |
| /* nothing to be done here. aux3 is | |
| directly connected to the saa711a */ | |
| i = 1; | |
| break; | |
| } | |
| case AUX1: | |
| { | |
| i = 0; | |
| vm.in = 1; | |
| vm.out = 17; | |
| break; | |
| } | |
| } | |
| /* switch video in tea6415c only if necessary */ | |
| switch( input ) { | |
| case TUNER: | |
| case AUX1: | |
| { | |
| if ( 0 != mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm)) { | |
| printk("VIDIOC_S_INPUT: could not address tea6415c #3\n"); | |
| return -EFAULT; | |
| } | |
| break; | |
| } | |
| default: | |
| { | |
| break; | |
| } | |
| } | |
| /* switch video in saa7111a */ | |
| if ( 0 != mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_INPUT, &i)) { | |
| printk("VIDIOC_S_INPUT: could not address saa7111a #1.\n"); | |
| } | |
| /* switch the audio-source only if necessary */ | |
| if( 0 == mxb->cur_mute ) { | |
| mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[input]][0]); | |
| mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[video_audio_connect[input]][1]); | |
| } | |
| return 0; | |
| } | |
| case VIDIOC_G_TUNER: | |
| { | |
| struct v4l2_tuner *t = arg; | |
| int byte = 0; | |
| if( 0 != t->index ) { | |
| DEB_D(("VIDIOC_G_TUNER: channel %d does not have a tuner attached.\n", t->index)); | |
| return -EINVAL; | |
| } | |
| DEB_EE(("VIDIOC_G_TUNER: %d\n", t->index)); | |
| memset(t,0,sizeof(*t)); | |
| strcpy(t->name, "Television"); | |
| t->type = V4L2_TUNER_ANALOG_TV; | |
| t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; | |
| t->rangelow = 772; /* 48.25 MHZ / 62.5 kHz = 772, see fi1216mk2-specs, page 2 */ | |
| t->rangehigh = 13684; /* 855.25 MHz / 62.5 kHz = 13684 */ | |
| /* FIXME: add the real signal strength here */ | |
| t->signal = 0xffff; | |
| t->afc = 0; | |
| mxb->tda9840->driver->command(mxb->tda9840,TDA9840_DETECT, &byte); | |
| t->audmode = mxb->cur_mode; | |
| if( byte < 0 ) { | |
| t->rxsubchans = V4L2_TUNER_SUB_MONO; | |
| } else { | |
| switch(byte) { | |
| case TDA9840_MONO_DETECT: { | |
| t->rxsubchans = V4L2_TUNER_SUB_MONO; | |
| DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_MONO.\n")); | |
| break; | |
| } | |
| case TDA9840_DUAL_DETECT: { | |
| t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; | |
| DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_LANG1.\n")); | |
| break; | |
| } | |
| case TDA9840_STEREO_DETECT: { | |
| t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; | |
| DEB_D(("VIDIOC_G_TUNER: V4L2_TUNER_MODE_STEREO.\n")); | |
| break; | |
| } | |
| default: { /* TDA9840_INCORRECT_DETECT */ | |
| t->rxsubchans = V4L2_TUNER_MODE_MONO; | |
| DEB_D(("VIDIOC_G_TUNER: TDA9840_INCORRECT_DETECT => V4L2_TUNER_MODE_MONO\n")); | |
| break; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| case VIDIOC_S_TUNER: | |
| { | |
| struct v4l2_tuner *t = arg; | |
| int result = 0; | |
| int byte = 0; | |
| if( 0 != t->index ) { | |
| DEB_D(("VIDIOC_S_TUNER: channel %d does not have a tuner attached.\n",t->index)); | |
| return -EINVAL; | |
| } | |
| switch(t->audmode) { | |
| case V4L2_TUNER_MODE_STEREO: { | |
| mxb->cur_mode = V4L2_TUNER_MODE_STEREO; | |
| byte = TDA9840_SET_STEREO; | |
| DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_STEREO\n")); | |
| break; | |
| } | |
| case V4L2_TUNER_MODE_LANG1_LANG2: { | |
| mxb->cur_mode = V4L2_TUNER_MODE_LANG1_LANG2; | |
| byte = TDA9840_SET_BOTH; | |
| DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1_LANG2\n")); | |
| break; | |
| } | |
| case V4L2_TUNER_MODE_LANG1: { | |
| mxb->cur_mode = V4L2_TUNER_MODE_LANG1; | |
| byte = TDA9840_SET_LANG1; | |
| DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1\n")); | |
| break; | |
| } | |
| case V4L2_TUNER_MODE_LANG2: { | |
| mxb->cur_mode = V4L2_TUNER_MODE_LANG2; | |
| byte = TDA9840_SET_LANG2; | |
| DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG2\n")); | |
| break; | |
| } | |
| default: { /* case V4L2_TUNER_MODE_MONO: {*/ | |
| mxb->cur_mode = V4L2_TUNER_MODE_MONO; | |
| byte = TDA9840_SET_MONO; | |
| DEB_D(("VIDIOC_S_TUNER: TDA9840_SET_MONO\n")); | |
| break; | |
| } | |
| } | |
| if( 0 != (result = mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &byte))) { | |
| printk("VIDIOC_S_TUNER error. result:%d, byte:%d\n",result,byte); | |
| } | |
| return 0; | |
| } | |
| case VIDIOC_G_FREQUENCY: | |
| { | |
| struct v4l2_frequency *f = arg; | |
| if(0 != mxb->cur_input) { | |
| DEB_D(("VIDIOC_G_FREQ: channel %d does not have a tuner!\n",mxb->cur_input)); | |
| return -EINVAL; | |
| } | |
| *f = mxb->cur_freq; | |
| DEB_EE(("VIDIOC_G_FREQ: freq:0x%08x.\n", mxb->cur_freq.frequency)); | |
| return 0; | |
| } | |
| case VIDIOC_S_FREQUENCY: | |
| { | |
| struct v4l2_frequency *f = arg; | |
| if (0 != f->tuner) | |
| return -EINVAL; | |
| if (V4L2_TUNER_ANALOG_TV != f->type) | |
| return -EINVAL; | |
| if(0 != mxb->cur_input) { | |
| DEB_D(("VIDIOC_S_FREQ: channel %d does not have a tuner!\n",mxb->cur_input)); | |
| return -EINVAL; | |
| } | |
| mxb->cur_freq = *f; | |
| DEB_EE(("VIDIOC_S_FREQUENCY: freq:0x%08x.\n", mxb->cur_freq.frequency)); | |
| /* tune in desired frequency */ | |
| mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_FREQUENCY, &mxb->cur_freq); | |
| /* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */ | |
| spin_lock(&dev->slock); | |
| vv->vbi_fieldcount = 0; | |
| spin_unlock(&dev->slock); | |
| return 0; | |
| } | |
| case MXB_S_AUDIO_CD: | |
| { | |
| int i = *(int*)arg; | |
| if( i < 0 || i >= MXB_AUDIOS ) { | |
| DEB_D(("illegal argument to MXB_S_AUDIO_CD: i:%d.\n",i)); | |
| return -EINVAL; | |
| } | |
| DEB_EE(("MXB_S_AUDIO_CD: i:%d.\n",i)); | |
| mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_cd[i][0]); | |
| mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_cd[i][1]); | |
| return 0; | |
| } | |
| case MXB_S_AUDIO_LINE: | |
| { | |
| int i = *(int*)arg; | |
| if( i < 0 || i >= MXB_AUDIOS ) { | |
| DEB_D(("illegal argument to MXB_S_AUDIO_LINE: i:%d.\n",i)); | |
| return -EINVAL; | |
| } | |
| DEB_EE(("MXB_S_AUDIO_LINE: i:%d.\n",i)); | |
| mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[i][0]); | |
| mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[i][1]); | |
| return 0; | |
| } | |
| case VIDIOC_G_AUDIO: | |
| { | |
| struct v4l2_audio *a = arg; | |
| if( a->index < 0 || a->index > MXB_INPUTS ) { | |
| DEB_D(("VIDIOC_G_AUDIO %d out of range.\n",a->index)); | |
| return -EINVAL; | |
| } | |
| DEB_EE(("VIDIOC_G_AUDIO %d.\n",a->index)); | |
| memcpy(a, &mxb_audios[video_audio_connect[mxb->cur_input]], sizeof(struct v4l2_audio)); | |
| return 0; | |
| } | |
| case VIDIOC_S_AUDIO: | |
| { | |
| struct v4l2_audio *a = arg; | |
| DEB_D(("VIDIOC_S_AUDIO %d.\n",a->index)); | |
| return 0; | |
| } | |
| default: | |
| /* | |
| DEB2(printk("does not handle this ioctl.\n")); | |
| */ | |
| return -ENOIOCTLCMD; | |
| } | |
| return 0; | |
| } | |
| static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std) | |
| { | |
| struct mxb* mxb = (struct mxb*)dev->ext_priv; | |
| int zero = 0; | |
| int one = 1; | |
| if(V4L2_STD_PAL_I == std->id ) { | |
| v4l2_std_id std = V4L2_STD_PAL_I; | |
| DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n")); | |
| /* set the 7146 gpio register -- I don't know what this does exactly */ | |
| saa7146_write(dev, GPIO_CTRL, 0x00404050); | |
| /* unset the 7111 gpio register -- I don't know what this does exactly */ | |
| mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &zero); | |
| mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); | |
| } else { | |
| v4l2_std_id std = V4L2_STD_PAL_BG; | |
| DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n")); | |
| /* set the 7146 gpio register -- I don't know what this does exactly */ | |
| saa7146_write(dev, GPIO_CTRL, 0x00404050); | |
| /* set the 7111 gpio register -- I don't know what this does exactly */ | |
| mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &one); | |
| mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); | |
| } | |
| return 0; | |
| } | |
| static struct saa7146_standard standard[] = { | |
| { | |
| .name = "PAL-BG", .id = V4L2_STD_PAL_BG, | |
| .v_offset = 0x17, .v_field = 288, | |
| .h_offset = 0x14, .h_pixels = 680, | |
| .v_max_out = 576, .h_max_out = 768, | |
| }, { | |
| .name = "PAL-I", .id = V4L2_STD_PAL_I, | |
| .v_offset = 0x17, .v_field = 288, | |
| .h_offset = 0x14, .h_pixels = 680, | |
| .v_max_out = 576, .h_max_out = 768, | |
| }, { | |
| .name = "NTSC", .id = V4L2_STD_NTSC, | |
| .v_offset = 0x16, .v_field = 240, | |
| .h_offset = 0x06, .h_pixels = 708, | |
| .v_max_out = 480, .h_max_out = 640, | |
| }, { | |
| .name = "SECAM", .id = V4L2_STD_SECAM, | |
| .v_offset = 0x14, .v_field = 288, | |
| .h_offset = 0x14, .h_pixels = 720, | |
| .v_max_out = 576, .h_max_out = 768, | |
| } | |
| }; | |
| static struct saa7146_pci_extension_data mxb = { | |
| .ext_priv = "Multimedia eXtension Board", | |
| .ext = &extension, | |
| }; | |
| static struct pci_device_id pci_tbl[] = { | |
| { | |
| .vendor = PCI_VENDOR_ID_PHILIPS, | |
| .device = PCI_DEVICE_ID_PHILIPS_SAA7146, | |
| .subvendor = 0x0000, | |
| .subdevice = 0x0000, | |
| .driver_data = (unsigned long)&mxb, | |
| }, { | |
| .vendor = 0, | |
| } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, pci_tbl); | |
| static struct saa7146_ext_vv vv_data = { | |
| .inputs = MXB_INPUTS, | |
| .capabilities = V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE, | |
| .stds = &standard[0], | |
| .num_stds = sizeof(standard)/sizeof(struct saa7146_standard), | |
| .std_callback = &std_callback, | |
| .ioctls = &ioctls[0], | |
| .ioctl = mxb_ioctl, | |
| }; | |
| static struct saa7146_extension extension = { | |
| .name = MXB_IDENTIFIER, | |
| .flags = SAA7146_USE_I2C_IRQ, | |
| .pci_tbl = &pci_tbl[0], | |
| .module = THIS_MODULE, | |
| .probe = mxb_probe, | |
| .attach = mxb_attach, | |
| .detach = mxb_detach, | |
| .irq_mask = 0, | |
| .irq_func = NULL, | |
| }; | |
| static int __init mxb_init_module(void) | |
| { | |
| if( 0 != saa7146_register_extension(&extension)) { | |
| DEB_S(("failed to register extension.\n")); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static void __exit mxb_cleanup_module(void) | |
| { | |
| saa7146_unregister_extension(&extension); | |
| } | |
| module_init(mxb_init_module); | |
| module_exit(mxb_cleanup_module); | |
| MODULE_DESCRIPTION("video4linux-2 driver for the Siemens-Nixdorf 'Multimedia eXtension board'"); | |
| MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); | |
| MODULE_LICENSE("GPL"); |