| /* | |
| * stradis.c - stradis 4:2:2 mpeg decoder driver | |
| * | |
| * Stradis 4:2:2 MPEG-2 Decoder Driver | |
| * Copyright (C) 1999 Nathan Laredo <laredo@gnu.org> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/delay.h> | |
| #include <linux/errno.h> | |
| #include <linux/fs.h> | |
| #include <linux/kernel.h> | |
| #include <linux/major.h> | |
| #include <linux/slab.h> | |
| #include <linux/mm.h> | |
| #include <linux/init.h> | |
| #include <linux/poll.h> | |
| #include <linux/pci.h> | |
| #include <linux/signal.h> | |
| #include <asm/io.h> | |
| #include <linux/ioport.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/page.h> | |
| #include <linux/sched.h> | |
| #include <asm/types.h> | |
| #include <linux/types.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/uaccess.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/videodev.h> | |
| #include <media/v4l2-common.h> | |
| #include "saa7146.h" | |
| #include "saa7146reg.h" | |
| #include "ibmmpeg2.h" | |
| #include "saa7121.h" | |
| #include "cs8420.h" | |
| #define DEBUG(x) /* debug driver */ | |
| #undef IDEBUG /* debug irq handler */ | |
| #undef MDEBUG /* debug memory management */ | |
| #define SAA7146_MAX 6 | |
| static struct saa7146 saa7146s[SAA7146_MAX]; | |
| static int saa_num = 0; /* number of SAA7146s in use */ | |
| static int video_nr = -1; | |
| module_param(video_nr, int, 0); | |
| MODULE_LICENSE("GPL"); | |
| #define nDebNormal 0x00480000 | |
| #define nDebNoInc 0x00480000 | |
| #define nDebVideo 0xd0480000 | |
| #define nDebAudio 0xd0400000 | |
| #define nDebDMA 0x02c80000 | |
| #define oDebNormal 0x13c80000 | |
| #define oDebNoInc 0x13c80000 | |
| #define oDebVideo 0xd1080000 | |
| #define oDebAudio 0xd1080000 | |
| #define oDebDMA 0x03080000 | |
| #define NewCard (saa->boardcfg[3]) | |
| #define ChipControl (saa->boardcfg[1]) | |
| #define NTSCFirstActive (saa->boardcfg[4]) | |
| #define PALFirstActive (saa->boardcfg[5]) | |
| #define NTSCLastActive (saa->boardcfg[54]) | |
| #define PALLastActive (saa->boardcfg[55]) | |
| #define Have2MB (saa->boardcfg[18] & 0x40) | |
| #define HaveCS8420 (saa->boardcfg[18] & 0x04) | |
| #define IBMMPEGCD20 (saa->boardcfg[18] & 0x20) | |
| #define HaveCS3310 (saa->boardcfg[18] & 0x01) | |
| #define CS3310MaxLvl ((saa->boardcfg[30] << 8) | saa->boardcfg[31]) | |
| #define HaveCS4341 (saa->boardcfg[40] == 2) | |
| #define SDIType (saa->boardcfg[27]) | |
| #define CurrentMode (saa->boardcfg[2]) | |
| #define debNormal (NewCard ? nDebNormal : oDebNormal) | |
| #define debNoInc (NewCard ? nDebNoInc : oDebNoInc) | |
| #define debVideo (NewCard ? nDebVideo : oDebVideo) | |
| #define debAudio (NewCard ? nDebAudio : oDebAudio) | |
| #define debDMA (NewCard ? nDebDMA : oDebDMA) | |
| #ifdef USE_RESCUE_EEPROM_SDM275 | |
| static unsigned char rescue_eeprom[64] = { | |
| 0x00, 0x01, 0x04, 0x13, 0x26, 0x0f, 0x10, 0x00, 0x00, 0x00, 0x43, 0x63, | |
| 0x22, 0x01, 0x29, 0x15, 0x73, 0x00, 0x1f, 'd', 'e', 'c', 'x', 'l', | |
| 'd', 'v', 'a', 0x02, 0x00, 0x01, 0x00, 0xcc, 0xa4, 0x63, 0x09, 0xe2, | |
| 0x10, 0x00, 0x0a, 0x00, 0x02, 0x02, 'd', 'e', 'c', 'x', 'l', 'a', | |
| 0x00, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| 0x00, 0x00, 0x00, 0x00, | |
| }; | |
| #endif | |
| /* ----------------------------------------------------------------------- */ | |
| /* Hardware I2C functions */ | |
| static void I2CWipe(struct saa7146 *saa) | |
| { | |
| int i; | |
| /* set i2c to ~=100kHz, abort transfer, clear busy */ | |
| saawrite(0x600 | SAA7146_I2C_ABORT, SAA7146_I2C_STATUS); | |
| saawrite((SAA7146_MC2_UPLD_I2C << 16) | | |
| SAA7146_MC2_UPLD_I2C, SAA7146_MC2); | |
| /* wait for i2c registers to be programmed */ | |
| for (i = 0; i < 1000 && | |
| !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++) | |
| schedule(); | |
| saawrite(0x600, SAA7146_I2C_STATUS); | |
| saawrite((SAA7146_MC2_UPLD_I2C << 16) | | |
| SAA7146_MC2_UPLD_I2C, SAA7146_MC2); | |
| /* wait for i2c registers to be programmed */ | |
| for (i = 0; i < 1000 && | |
| !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++) | |
| schedule(); | |
| saawrite(0x600, SAA7146_I2C_STATUS); | |
| saawrite((SAA7146_MC2_UPLD_I2C << 16) | | |
| SAA7146_MC2_UPLD_I2C, SAA7146_MC2); | |
| /* wait for i2c registers to be programmed */ | |
| for (i = 0; i < 1000 && | |
| !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++) | |
| schedule(); | |
| } | |
| /* read I2C */ | |
| static int I2CRead(struct saa7146 *saa, unsigned char addr, | |
| unsigned char subaddr, int dosub) | |
| { | |
| int i; | |
| if (saaread(SAA7146_I2C_STATUS) & 0x3c) | |
| I2CWipe(saa); | |
| for (i = 0; | |
| i < 1000 && (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); | |
| i++) | |
| schedule(); | |
| if (i == 1000) | |
| I2CWipe(saa); | |
| if (dosub) | |
| saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 8) | | |
| ((subaddr & 0xff) << 16) | 0xed, SAA7146_I2C_TRANSFER); | |
| else | |
| saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 16) | | |
| 0xf1, SAA7146_I2C_TRANSFER); | |
| saawrite((SAA7146_MC2_UPLD_I2C << 16) | | |
| SAA7146_MC2_UPLD_I2C, SAA7146_MC2); | |
| /* wait for i2c registers to be programmed */ | |
| for (i = 0; i < 1000 && | |
| !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++) | |
| schedule(); | |
| /* wait for valid data */ | |
| for (i = 0; i < 1000 && | |
| (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++) | |
| schedule(); | |
| if (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_ERR) | |
| return -1; | |
| if (i == 1000) | |
| printk("i2c setup read timeout\n"); | |
| saawrite(0x41, SAA7146_I2C_TRANSFER); | |
| saawrite((SAA7146_MC2_UPLD_I2C << 16) | | |
| SAA7146_MC2_UPLD_I2C, SAA7146_MC2); | |
| /* wait for i2c registers to be programmed */ | |
| for (i = 0; i < 1000 && | |
| !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++) | |
| schedule(); | |
| /* wait for valid data */ | |
| for (i = 0; i < 1000 && | |
| (saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_BUSY); i++) | |
| schedule(); | |
| if (saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_ERR) | |
| return -1; | |
| if (i == 1000) | |
| printk("i2c read timeout\n"); | |
| return ((saaread(SAA7146_I2C_TRANSFER) >> 24) & 0xff); | |
| } | |
| /* set both to write both bytes, reset it to write only b1 */ | |
| static int I2CWrite(struct saa7146 *saa, unsigned char addr, unsigned char b1, | |
| unsigned char b2, int both) | |
| { | |
| int i; | |
| u32 data; | |
| if (saaread(SAA7146_I2C_STATUS) & 0x3c) | |
| I2CWipe(saa); | |
| for (i = 0; i < 1000 && | |
| (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++) | |
| schedule(); | |
| if (i == 1000) | |
| I2CWipe(saa); | |
| data = ((addr & 0xfe) << 24) | ((b1 & 0xff) << 16); | |
| if (both) | |
| data |= ((b2 & 0xff) << 8) | 0xe5; | |
| else | |
| data |= 0xd1; | |
| saawrite(data, SAA7146_I2C_TRANSFER); | |
| saawrite((SAA7146_MC2_UPLD_I2C << 16) | SAA7146_MC2_UPLD_I2C, | |
| SAA7146_MC2); | |
| return 0; | |
| } | |
| static void attach_inform(struct saa7146 *saa, int id) | |
| { | |
| int i; | |
| DEBUG(printk(KERN_DEBUG "stradis%d: i2c: device found=%02x\n", saa->nr, | |
| id)); | |
| if (id == 0xa0) { /* we have rev2 or later board, fill in info */ | |
| for (i = 0; i < 64; i++) | |
| saa->boardcfg[i] = I2CRead(saa, 0xa0, i, 1); | |
| #ifdef USE_RESCUE_EEPROM_SDM275 | |
| if (saa->boardcfg[0] != 0) { | |
| printk("stradis%d: WARNING: EEPROM STORED VALUES HAVE " | |
| "BEEN IGNORED\n", saa->nr); | |
| for (i = 0; i < 64; i++) | |
| saa->boardcfg[i] = rescue_eeprom[i]; | |
| } | |
| #endif | |
| printk("stradis%d: config =", saa->nr); | |
| for (i = 0; i < 51; i++) { | |
| printk(" %02x", saa->boardcfg[i]); | |
| } | |
| printk("\n"); | |
| } | |
| } | |
| static void I2CBusScan(struct saa7146 *saa) | |
| { | |
| int i; | |
| for (i = 0; i < 0xff; i += 2) | |
| if ((I2CRead(saa, i, 0, 0)) >= 0) | |
| attach_inform(saa, i); | |
| } | |
| static int debiwait_maxwait = 0; | |
| static int wait_for_debi_done(struct saa7146 *saa) | |
| { | |
| int i; | |
| /* wait for registers to be programmed */ | |
| for (i = 0; i < 100000 && | |
| !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_DEBI); i++) | |
| saaread(SAA7146_MC2); | |
| /* wait for transfer to complete */ | |
| for (i = 0; i < 500000 && | |
| (saaread(SAA7146_PSR) & SAA7146_PSR_DEBI_S); i++) | |
| saaread(SAA7146_MC2); | |
| if (i > debiwait_maxwait) | |
| printk("wait-for-debi-done maxwait: %d\n", | |
| debiwait_maxwait = i); | |
| if (i == 500000) | |
| return -1; | |
| return 0; | |
| } | |
| static int debiwrite(struct saa7146 *saa, u32 config, int addr, | |
| u32 val, int count) | |
| { | |
| u32 cmd; | |
| if (count <= 0 || count > 32764) | |
| return -1; | |
| if (wait_for_debi_done(saa) < 0) | |
| return -1; | |
| saawrite(config, SAA7146_DEBI_CONFIG); | |
| if (count <= 4) /* immediate transfer */ | |
| saawrite(val, SAA7146_DEBI_AD); | |
| else /* block transfer */ | |
| saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD); | |
| saawrite((cmd = (count << 17) | (addr & 0xffff)), SAA7146_DEBI_COMMAND); | |
| saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI, | |
| SAA7146_MC2); | |
| return 0; | |
| } | |
| static u32 debiread(struct saa7146 *saa, u32 config, int addr, int count) | |
| { | |
| u32 result = 0; | |
| if (count > 32764 || count <= 0) | |
| return 0; | |
| if (wait_for_debi_done(saa) < 0) | |
| return 0; | |
| saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD); | |
| saawrite((count << 17) | 0x10000 | (addr & 0xffff), | |
| SAA7146_DEBI_COMMAND); | |
| saawrite(config, SAA7146_DEBI_CONFIG); | |
| saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI, | |
| SAA7146_MC2); | |
| if (count > 4) /* not an immediate transfer */ | |
| return count; | |
| wait_for_debi_done(saa); | |
| result = saaread(SAA7146_DEBI_AD); | |
| if (count == 1) | |
| result &= 0xff; | |
| if (count == 2) | |
| result &= 0xffff; | |
| if (count == 3) | |
| result &= 0xffffff; | |
| return result; | |
| } | |
| static void do_irq_send_data(struct saa7146 *saa) | |
| { | |
| int split, audbytes, vidbytes; | |
| saawrite(SAA7146_PSR_PIN1, SAA7146_IER); | |
| /* if special feature mode in effect, disable audio sending */ | |
| if (saa->playmode != VID_PLAY_NORMAL) | |
| saa->audtail = saa->audhead = 0; | |
| if (saa->audhead <= saa->audtail) | |
| audbytes = saa->audtail - saa->audhead; | |
| else | |
| audbytes = 65536 - (saa->audhead - saa->audtail); | |
| if (saa->vidhead <= saa->vidtail) | |
| vidbytes = saa->vidtail - saa->vidhead; | |
| else | |
| vidbytes = 524288 - (saa->vidhead - saa->vidtail); | |
| if (audbytes == 0 && vidbytes == 0 && saa->osdtail == saa->osdhead) { | |
| saawrite(0, SAA7146_IER); | |
| return; | |
| } | |
| /* if at least 1 block audio waiting and audio fifo isn't full */ | |
| if (audbytes >= 2048 && (debiread(saa, debNormal, IBM_MP2_AUD_FIFO, 2) | |
| & 0xff) < 60) { | |
| if (saa->audhead > saa->audtail) | |
| split = 65536 - saa->audhead; | |
| else | |
| split = 0; | |
| audbytes = 2048; | |
| if (split > 0 && split < 2048) { | |
| memcpy(saa->dmadebi, saa->audbuf + saa->audhead, split); | |
| saa->audhead = 0; | |
| audbytes -= split; | |
| } else | |
| split = 0; | |
| memcpy(saa->dmadebi + split, saa->audbuf + saa->audhead, | |
| audbytes); | |
| saa->audhead += audbytes; | |
| saa->audhead &= 0xffff; | |
| debiwrite(saa, debAudio, (NewCard ? IBM_MP2_AUD_FIFO : | |
| IBM_MP2_AUD_FIFOW), 0, 2048); | |
| wake_up_interruptible(&saa->audq); | |
| /* if at least 1 block video waiting and video fifo isn't full */ | |
| } else if (vidbytes >= 30720 && (debiread(saa, debNormal, | |
| IBM_MP2_FIFO, 2)) < 16384) { | |
| if (saa->vidhead > saa->vidtail) | |
| split = 524288 - saa->vidhead; | |
| else | |
| split = 0; | |
| vidbytes = 30720; | |
| if (split > 0 && split < 30720) { | |
| memcpy(saa->dmadebi, saa->vidbuf + saa->vidhead, split); | |
| saa->vidhead = 0; | |
| vidbytes -= split; | |
| } else | |
| split = 0; | |
| memcpy(saa->dmadebi + split, saa->vidbuf + saa->vidhead, | |
| vidbytes); | |
| saa->vidhead += vidbytes; | |
| saa->vidhead &= 0x7ffff; | |
| debiwrite(saa, debVideo, (NewCard ? IBM_MP2_FIFO : | |
| IBM_MP2_FIFOW), 0, 30720); | |
| wake_up_interruptible(&saa->vidq); | |
| } | |
| saawrite(SAA7146_PSR_DEBI_S | SAA7146_PSR_PIN1, SAA7146_IER); | |
| } | |
| static void send_osd_data(struct saa7146 *saa) | |
| { | |
| int size = saa->osdtail - saa->osdhead; | |
| if (size > 30720) | |
| size = 30720; | |
| /* ensure some multiple of 8 bytes is transferred */ | |
| size = 8 * ((size + 8) >> 3); | |
| if (size) { | |
| debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR, | |
| (saa->osdhead >> 3), 2); | |
| memcpy(saa->dmadebi, &saa->osdbuf[saa->osdhead], size); | |
| saa->osdhead += size; | |
| /* block transfer of next 8 bytes to ~32k bytes */ | |
| debiwrite(saa, debNormal, IBM_MP2_OSD_DATA, 0, size); | |
| } | |
| if (saa->osdhead >= saa->osdtail) { | |
| saa->osdhead = saa->osdtail = 0; | |
| debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2); | |
| } | |
| } | |
| static irqreturn_t saa7146_irq(int irq, void *dev_id) | |
| { | |
| struct saa7146 *saa = dev_id; | |
| u32 stat, astat; | |
| int count; | |
| int handled = 0; | |
| count = 0; | |
| while (1) { | |
| /* get/clear interrupt status bits */ | |
| stat = saaread(SAA7146_ISR); | |
| astat = stat & saaread(SAA7146_IER); | |
| if (!astat) | |
| break; | |
| handled = 1; | |
| saawrite(astat, SAA7146_ISR); | |
| if (astat & SAA7146_PSR_DEBI_S) { | |
| do_irq_send_data(saa); | |
| } | |
| if (astat & SAA7146_PSR_PIN1) { | |
| int istat; | |
| /* the following read will trigger DEBI_S */ | |
| istat = debiread(saa, debNormal, IBM_MP2_HOST_INT, 2); | |
| if (istat & 1) { | |
| saawrite(0, SAA7146_IER); | |
| send_osd_data(saa); | |
| saawrite(SAA7146_PSR_DEBI_S | | |
| SAA7146_PSR_PIN1, SAA7146_IER); | |
| } | |
| if (istat & 0x20) { /* Video Start */ | |
| saa->vidinfo.frame_count++; | |
| } | |
| if (istat & 0x400) { /* Picture Start */ | |
| /* update temporal reference */ | |
| } | |
| if (istat & 0x200) { /* Picture Resolution Change */ | |
| /* read new resolution */ | |
| } | |
| if (istat & 0x100) { /* New User Data found */ | |
| /* read new user data */ | |
| } | |
| if (istat & 0x1000) { /* new GOP/SMPTE */ | |
| /* read new SMPTE */ | |
| } | |
| if (istat & 0x8000) { /* Sequence Start Code */ | |
| /* reset frame counter, load sizes */ | |
| saa->vidinfo.frame_count = 0; | |
| saa->vidinfo.h_size = 704; | |
| saa->vidinfo.v_size = 480; | |
| #if 0 | |
| if (saa->endmarkhead != saa->endmarktail) { | |
| saa->audhead = | |
| saa->endmark[saa->endmarkhead]; | |
| saa->endmarkhead++; | |
| if (saa->endmarkhead >= MAX_MARKS) | |
| saa->endmarkhead = 0; | |
| } | |
| #endif | |
| } | |
| if (istat & 0x4000) { /* Sequence Error Code */ | |
| if (saa->endmarkhead != saa->endmarktail) { | |
| saa->audhead = | |
| saa->endmark[saa->endmarkhead]; | |
| saa->endmarkhead++; | |
| if (saa->endmarkhead >= MAX_MARKS) | |
| saa->endmarkhead = 0; | |
| } | |
| } | |
| } | |
| #ifdef IDEBUG | |
| if (astat & SAA7146_PSR_PPEF) { | |
| IDEBUG(printk("stradis%d irq: PPEF\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_PABO) { | |
| IDEBUG(printk("stradis%d irq: PABO\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_PPED) { | |
| IDEBUG(printk("stradis%d irq: PPED\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_RPS_I1) { | |
| IDEBUG(printk("stradis%d irq: RPS_I1\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_RPS_I0) { | |
| IDEBUG(printk("stradis%d irq: RPS_I0\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_RPS_LATE1) { | |
| IDEBUG(printk("stradis%d irq: RPS_LATE1\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_RPS_LATE0) { | |
| IDEBUG(printk("stradis%d irq: RPS_LATE0\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_RPS_E1) { | |
| IDEBUG(printk("stradis%d irq: RPS_E1\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_RPS_E0) { | |
| IDEBUG(printk("stradis%d irq: RPS_E0\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_RPS_TO1) { | |
| IDEBUG(printk("stradis%d irq: RPS_TO1\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_RPS_TO0) { | |
| IDEBUG(printk("stradis%d irq: RPS_TO0\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_UPLD) { | |
| IDEBUG(printk("stradis%d irq: UPLD\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_DEBI_E) { | |
| IDEBUG(printk("stradis%d irq: DEBI_E\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_I2C_S) { | |
| IDEBUG(printk("stradis%d irq: I2C_S\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_I2C_E) { | |
| IDEBUG(printk("stradis%d irq: I2C_E\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_A2_IN) { | |
| IDEBUG(printk("stradis%d irq: A2_IN\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_A2_OUT) { | |
| IDEBUG(printk("stradis%d irq: A2_OUT\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_A1_IN) { | |
| IDEBUG(printk("stradis%d irq: A1_IN\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_A1_OUT) { | |
| IDEBUG(printk("stradis%d irq: A1_OUT\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_AFOU) { | |
| IDEBUG(printk("stradis%d irq: AFOU\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_V_PE) { | |
| IDEBUG(printk("stradis%d irq: V_PE\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_VFOU) { | |
| IDEBUG(printk("stradis%d irq: VFOU\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_FIDA) { | |
| IDEBUG(printk("stradis%d irq: FIDA\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_FIDB) { | |
| IDEBUG(printk("stradis%d irq: FIDB\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_PIN3) { | |
| IDEBUG(printk("stradis%d irq: PIN3\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_PIN2) { | |
| IDEBUG(printk("stradis%d irq: PIN2\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_PIN0) { | |
| IDEBUG(printk("stradis%d irq: PIN0\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_ECS) { | |
| IDEBUG(printk("stradis%d irq: ECS\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_EC3S) { | |
| IDEBUG(printk("stradis%d irq: EC3S\n", saa->nr)); | |
| } | |
| if (astat & SAA7146_PSR_EC0S) { | |
| IDEBUG(printk("stradis%d irq: EC0S\n", saa->nr)); | |
| } | |
| #endif | |
| count++; | |
| if (count > 15) | |
| printk(KERN_WARNING "stradis%d: irq loop %d\n", | |
| saa->nr, count); | |
| if (count > 20) { | |
| saawrite(0, SAA7146_IER); | |
| printk(KERN_ERR | |
| "stradis%d: IRQ loop cleared\n", saa->nr); | |
| } | |
| } | |
| return IRQ_RETVAL(handled); | |
| } | |
| static int ibm_send_command(struct saa7146 *saa, | |
| int command, int data, int chain) | |
| { | |
| int i; | |
| if (chain) | |
| debiwrite(saa, debNormal, IBM_MP2_COMMAND, (command << 1)| 1,2); | |
| else | |
| debiwrite(saa, debNormal, IBM_MP2_COMMAND, command << 1, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_CMD_DATA, data, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_CMD_STAT, 1, 2); | |
| for (i = 0; i < 100 && | |
| (debiread(saa, debNormal, IBM_MP2_CMD_STAT, 2) & 1); i++) | |
| schedule(); | |
| if (i == 100) | |
| return -1; | |
| return 0; | |
| } | |
| static void cs4341_setlevel(struct saa7146 *saa, int left, int right) | |
| { | |
| I2CWrite(saa, 0x22, 0x03, left > 94 ? 94 : left, 2); | |
| I2CWrite(saa, 0x22, 0x04, right > 94 ? 94 : right, 2); | |
| } | |
| static void initialize_cs4341(struct saa7146 *saa) | |
| { | |
| int i; | |
| for (i = 0; i < 200; i++) { | |
| /* auto mute off, power on, no de-emphasis */ | |
| /* I2S data up to 24-bit 64xFs internal SCLK */ | |
| I2CWrite(saa, 0x22, 0x01, 0x11, 2); | |
| /* ATAPI mixer settings */ | |
| I2CWrite(saa, 0x22, 0x02, 0x49, 2); | |
| /* attenuation left 3db */ | |
| I2CWrite(saa, 0x22, 0x03, 0x00, 2); | |
| /* attenuation right 3db */ | |
| I2CWrite(saa, 0x22, 0x04, 0x00, 2); | |
| I2CWrite(saa, 0x22, 0x01, 0x10, 2); | |
| if (I2CRead(saa, 0x22, 0x02, 1) == 0x49) | |
| break; | |
| schedule(); | |
| } | |
| printk("stradis%d: CS4341 initialized (%d)\n", saa->nr, i); | |
| return; | |
| } | |
| static void initialize_cs8420(struct saa7146 *saa, int pro) | |
| { | |
| int i; | |
| u8 *sequence; | |
| if (pro) | |
| sequence = mode8420pro; | |
| else | |
| sequence = mode8420con; | |
| for (i = 0; i < INIT8420LEN; i++) | |
| I2CWrite(saa, 0x20, init8420[i * 2], init8420[i * 2 + 1], 2); | |
| for (i = 0; i < MODE8420LEN; i++) | |
| I2CWrite(saa, 0x20, sequence[i * 2], sequence[i * 2 + 1], 2); | |
| printk("stradis%d: CS8420 initialized\n", saa->nr); | |
| } | |
| static void initialize_saa7121(struct saa7146 *saa, int dopal) | |
| { | |
| int i, mod; | |
| u8 *sequence; | |
| if (dopal) | |
| sequence = init7121pal; | |
| else | |
| sequence = init7121ntsc; | |
| mod = saaread(SAA7146_PSR) & 0x08; | |
| /* initialize PAL/NTSC video encoder */ | |
| for (i = 0; i < INIT7121LEN; i++) { | |
| if (NewCard) { /* handle new card encoder differences */ | |
| if (sequence[i * 2] == 0x3a) | |
| I2CWrite(saa, 0x88, 0x3a, 0x13, 2); | |
| else if (sequence[i * 2] == 0x6b) | |
| I2CWrite(saa, 0x88, 0x6b, 0x20, 2); | |
| else if (sequence[i * 2] == 0x6c) | |
| I2CWrite(saa, 0x88, 0x6c, | |
| dopal ? 0x09 : 0xf5, 2); | |
| else if (sequence[i * 2] == 0x6d) | |
| I2CWrite(saa, 0x88, 0x6d, | |
| dopal ? 0x20 : 0x00, 2); | |
| else if (sequence[i * 2] == 0x7a) | |
| I2CWrite(saa, 0x88, 0x7a, | |
| dopal ? (PALFirstActive - 1) : | |
| (NTSCFirstActive - 4), 2); | |
| else if (sequence[i * 2] == 0x7b) | |
| I2CWrite(saa, 0x88, 0x7b, | |
| dopal ? PALLastActive : | |
| NTSCLastActive, 2); | |
| else | |
| I2CWrite(saa, 0x88, sequence[i * 2], | |
| sequence[i * 2 + 1], 2); | |
| } else { | |
| if (sequence[i * 2] == 0x6b && mod) | |
| I2CWrite(saa, 0x88, 0x6b, | |
| (sequence[i * 2 + 1] ^ 0x09), 2); | |
| else if (sequence[i * 2] == 0x7a) | |
| I2CWrite(saa, 0x88, 0x7a, | |
| dopal ? (PALFirstActive - 1) : | |
| (NTSCFirstActive - 4), 2); | |
| else if (sequence[i * 2] == 0x7b) | |
| I2CWrite(saa, 0x88, 0x7b, | |
| dopal ? PALLastActive : | |
| NTSCLastActive, 2); | |
| else | |
| I2CWrite(saa, 0x88, sequence[i * 2], | |
| sequence[i * 2 + 1], 2); | |
| } | |
| } | |
| } | |
| static void set_genlock_offset(struct saa7146 *saa, int noffset) | |
| { | |
| int nCode; | |
| int PixelsPerLine = 858; | |
| if (CurrentMode == VIDEO_MODE_PAL) | |
| PixelsPerLine = 864; | |
| if (noffset > 500) | |
| noffset = 500; | |
| else if (noffset < -500) | |
| noffset = -500; | |
| nCode = noffset + 0x100; | |
| if (nCode == 1) | |
| nCode = 0x401; | |
| else if (nCode < 1) | |
| nCode = 0x400 + PixelsPerLine + nCode; | |
| debiwrite(saa, debNormal, XILINX_GLDELAY, nCode, 2); | |
| } | |
| static void set_out_format(struct saa7146 *saa, int mode) | |
| { | |
| initialize_saa7121(saa, (mode == VIDEO_MODE_NTSC ? 0 : 1)); | |
| saa->boardcfg[2] = mode; | |
| /* do not adjust analog video parameters here, use saa7121 init */ | |
| /* you will affect the SDI output on the new card */ | |
| if (mode == VIDEO_MODE_PAL) { /* PAL */ | |
| debiwrite(saa, debNormal, XILINX_CTL0, 0x0808, 2); | |
| mdelay(50); | |
| saawrite(0x012002c0, SAA7146_NUM_LINE_BYTE1); | |
| if (NewCard) { | |
| debiwrite(saa, debNormal, IBM_MP2_DISP_MODE, 0xe100, 2); | |
| mdelay(50); | |
| } | |
| debiwrite(saa, debNormal, IBM_MP2_DISP_MODE, | |
| NewCard ? 0xe500 : 0x6500, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_DISP_DLY, | |
| (1 << 8) | | |
| (NewCard ? PALFirstActive : PALFirstActive - 6), 2); | |
| } else { /* NTSC */ | |
| debiwrite(saa, debNormal, XILINX_CTL0, 0x0800, 2); | |
| mdelay(50); | |
| saawrite(0x00f002c0, SAA7146_NUM_LINE_BYTE1); | |
| debiwrite(saa, debNormal, IBM_MP2_DISP_MODE, | |
| NewCard ? 0xe100 : 0x6100, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_DISP_DLY, | |
| (1 << 8) | | |
| (NewCard ? NTSCFirstActive : NTSCFirstActive - 6), 2); | |
| } | |
| } | |
| /* Intialize bitmangler to map from a byte value to the mangled word that | |
| * must be output to program the Xilinx part through the DEBI port. | |
| * Xilinx Data Bit->DEBI Bit: 0->15 1->7 2->6 3->12 4->11 5->2 6->1 7->0 | |
| * transfer FPGA code, init IBM chip, transfer IBM microcode | |
| * rev2 card mangles: 0->7 1->6 2->5 3->4 4->3 5->2 6->1 7->0 | |
| */ | |
| static u16 bitmangler[256]; | |
| static int initialize_fpga(struct video_code *bitdata) | |
| { | |
| int i, num, startindex, failure = 0, loadtwo, loadfile = 0; | |
| u16 *dmabuf; | |
| u8 *newdma; | |
| struct saa7146 *saa; | |
| /* verify fpga code */ | |
| for (startindex = 0; startindex < bitdata->datasize; startindex++) | |
| if (bitdata->data[startindex] == 255) | |
| break; | |
| if (startindex == bitdata->datasize) { | |
| printk(KERN_INFO "stradis: bad fpga code\n"); | |
| return -1; | |
| } | |
| /* initialize all detected cards */ | |
| for (num = 0; num < saa_num; num++) { | |
| saa = &saa7146s[num]; | |
| if (saa->boardcfg[0] > 20) | |
| continue; /* card was programmed */ | |
| loadtwo = (saa->boardcfg[18] & 0x10); | |
| if (!NewCard) /* we have an old board */ | |
| for (i = 0; i < 256; i++) | |
| bitmangler[i] = ((i & 0x01) << 15) | | |
| ((i & 0x02) << 6) | ((i & 0x04) << 4) | | |
| ((i & 0x08) << 9) | ((i & 0x10) << 7) | | |
| ((i & 0x20) >> 3) | ((i & 0x40) >> 5) | | |
| ((i & 0x80) >> 7); | |
| else /* else we have a new board */ | |
| for (i = 0; i < 256; i++) | |
| bitmangler[i] = ((i & 0x01) << 7) | | |
| ((i & 0x02) << 5) | ((i & 0x04) << 3) | | |
| ((i & 0x08) << 1) | ((i & 0x10) >> 1) | | |
| ((i & 0x20) >> 3) | ((i & 0x40) >> 5) | | |
| ((i & 0x80) >> 7); | |
| dmabuf = (u16 *) saa->dmadebi; | |
| newdma = (u8 *) saa->dmadebi; | |
| if (NewCard) { /* SDM2xxx */ | |
| if (!strncmp(bitdata->loadwhat, "decoder2", 8)) | |
| continue; /* fpga not for this card */ | |
| if (!strncmp(&saa->boardcfg[42], bitdata->loadwhat, 8)) | |
| loadfile = 1; | |
| else if (loadtwo && !strncmp(&saa->boardcfg[19], | |
| bitdata->loadwhat, 8)) | |
| loadfile = 2; | |
| else if (!saa->boardcfg[42] && !strncmp("decxl", | |
| bitdata->loadwhat, 8)) | |
| loadfile = 1; /* special */ | |
| else | |
| continue; /* fpga not for this card */ | |
| if (loadfile != 1 && loadfile != 2) | |
| continue; /* skip to next card */ | |
| if (saa->boardcfg[0] && loadfile == 1) | |
| continue; /* skip to next card */ | |
| if (saa->boardcfg[0] != 1 && loadfile == 2) | |
| continue; /* skip to next card */ | |
| saa->boardcfg[0]++; /* mark fpga handled */ | |
| printk("stradis%d: loading %s\n", saa->nr, | |
| bitdata->loadwhat); | |
| if (loadtwo && loadfile == 2) | |
| goto send_fpga_stuff; | |
| /* turn on the Audio interface to set PROG low */ | |
| saawrite(0x00400040, SAA7146_GPIO_CTRL); | |
| saaread(SAA7146_PSR); /* ensure posted write */ | |
| /* wait for everyone to reset */ | |
| mdelay(10); | |
| saawrite(0x00400000, SAA7146_GPIO_CTRL); | |
| } else { /* original card */ | |
| if (strncmp(bitdata->loadwhat, "decoder2", 8)) | |
| continue; /* fpga not for this card */ | |
| /* Pull the Xilinx PROG signal WS3 low */ | |
| saawrite(0x02000200, SAA7146_MC1); | |
| /* Turn on the Audio interface so can set PROG low */ | |
| saawrite(0x000000c0, SAA7146_ACON1); | |
| /* Pull the Xilinx INIT signal (GPIO2) low */ | |
| saawrite(0x00400000, SAA7146_GPIO_CTRL); | |
| /* Make sure everybody resets */ | |
| saaread(SAA7146_PSR); /* ensure posted write */ | |
| mdelay(10); | |
| /* Release the Xilinx PROG signal */ | |
| saawrite(0x00000000, SAA7146_ACON1); | |
| /* Turn off the Audio interface */ | |
| saawrite(0x02000000, SAA7146_MC1); | |
| } | |
| /* Release Xilinx INIT signal (WS2) */ | |
| saawrite(0x00000000, SAA7146_GPIO_CTRL); | |
| /* Wait for the INIT to go High */ | |
| for (i = 0; | |
| i < 10000 && !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2); | |
| i++) | |
| schedule(); | |
| if (i == 1000) { | |
| printk(KERN_INFO "stradis%d: no fpga INIT\n", saa->nr); | |
| return -1; | |
| } | |
| send_fpga_stuff: | |
| if (NewCard) { | |
| for (i = startindex; i < bitdata->datasize; i++) | |
| newdma[i - startindex] = | |
| bitmangler[bitdata->data[i]]; | |
| debiwrite(saa, 0x01420000, 0, 0, | |
| ((bitdata->datasize - startindex) + 5)); | |
| if (loadtwo && loadfile == 1) { | |
| printk("stradis%d: awaiting 2nd FPGA bitfile\n", | |
| saa->nr); | |
| continue; /* skip to next card */ | |
| } | |
| } else { | |
| for (i = startindex; i < bitdata->datasize; i++) | |
| dmabuf[i - startindex] = | |
| bitmangler[bitdata->data[i]]; | |
| debiwrite(saa, 0x014a0000, 0, 0, | |
| ((bitdata->datasize - startindex) + 5) * 2); | |
| } | |
| for (i = 0; | |
| i < 1000 && !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2); | |
| i++) | |
| schedule(); | |
| if (i == 1000) { | |
| printk(KERN_INFO "stradis%d: FPGA load failed\n", | |
| saa->nr); | |
| failure++; | |
| continue; | |
| } | |
| if (!NewCard) { | |
| /* Pull the Xilinx INIT signal (GPIO2) low */ | |
| saawrite(0x00400000, SAA7146_GPIO_CTRL); | |
| saaread(SAA7146_PSR); /* ensure posted write */ | |
| mdelay(2); | |
| saawrite(0x00000000, SAA7146_GPIO_CTRL); | |
| mdelay(2); | |
| } | |
| printk(KERN_INFO "stradis%d: FPGA Loaded\n", saa->nr); | |
| saa->boardcfg[0] = 26; /* mark fpga programmed */ | |
| /* set VXCO to its lowest frequency */ | |
| debiwrite(saa, debNormal, XILINX_PWM, 0, 2); | |
| if (NewCard) { | |
| /* mute CS3310 */ | |
| if (HaveCS3310) | |
| debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, | |
| 0, 2); | |
| /* set VXCO to PWM mode, release reset, blank on */ | |
| debiwrite(saa, debNormal, XILINX_CTL0, 0xffc4, 2); | |
| mdelay(10); | |
| /* unmute CS3310 */ | |
| if (HaveCS3310) | |
| debiwrite(saa, debNormal, XILINX_CTL0, | |
| 0x2020, 2); | |
| } | |
| /* set source Black */ | |
| debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2); | |
| saa->boardcfg[4] = 22; /* set NTSC First Active Line */ | |
| saa->boardcfg[5] = 23; /* set PAL First Active Line */ | |
| saa->boardcfg[54] = 2; /* set NTSC Last Active Line - 256 */ | |
| saa->boardcfg[55] = 54; /* set PAL Last Active Line - 256 */ | |
| set_out_format(saa, VIDEO_MODE_NTSC); | |
| mdelay(50); | |
| /* begin IBM chip init */ | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2); | |
| saaread(SAA7146_PSR); /* wait for reset */ | |
| mdelay(5); | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2); | |
| debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0x10, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_CMD_ADDR, 0, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2); | |
| if (NewCard) { | |
| mdelay(5); | |
| /* set i2s rate converter to 48KHz */ | |
| debiwrite(saa, debNormal, 0x80c0, 6, 2); | |
| /* we must init CS8420 first since rev b pulls i2s */ | |
| /* master clock low and CS4341 needs i2s master to */ | |
| /* run the i2c port. */ | |
| if (HaveCS8420) | |
| /* 0=consumer, 1=pro */ | |
| initialize_cs8420(saa, 0); | |
| mdelay(5); | |
| if (HaveCS4341) | |
| initialize_cs4341(saa); | |
| } | |
| debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2); | |
| if (NewCard) | |
| set_genlock_offset(saa, 0); | |
| debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2); | |
| #if 0 | |
| /* enable genlock */ | |
| debiwrite(saa, debNormal, XILINX_CTL0, 0x8000, 2); | |
| #else | |
| /* disable genlock */ | |
| debiwrite(saa, debNormal, XILINX_CTL0, 0x8080, 2); | |
| #endif | |
| } | |
| return failure; | |
| } | |
| static int do_ibm_reset(struct saa7146 *saa) | |
| { | |
| /* failure if decoder not previously programmed */ | |
| if (saa->boardcfg[0] < 37) | |
| return -EIO; | |
| /* mute CS3310 */ | |
| if (HaveCS3310) | |
| debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, 0, 2); | |
| /* disable interrupts */ | |
| saawrite(0, SAA7146_IER); | |
| saa->audhead = saa->audtail = 0; | |
| saa->vidhead = saa->vidtail = 0; | |
| /* tristate debi bus, disable debi transfers */ | |
| saawrite(0x00880000, SAA7146_MC1); | |
| /* ensure posted write */ | |
| saaread(SAA7146_MC1); | |
| mdelay(50); | |
| /* re-enable debi transfers */ | |
| saawrite(0x00880088, SAA7146_MC1); | |
| /* set source Black */ | |
| debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2); | |
| /* begin IBM chip init */ | |
| set_out_format(saa, CurrentMode); | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2); | |
| saaread(SAA7146_PSR); /* wait for reset */ | |
| mdelay(5); | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2); | |
| debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2); | |
| if (NewCard) { | |
| mdelay(5); | |
| /* set i2s rate converter to 48KHz */ | |
| debiwrite(saa, debNormal, 0x80c0, 6, 2); | |
| /* we must init CS8420 first since rev b pulls i2s */ | |
| /* master clock low and CS4341 needs i2s master to */ | |
| /* run the i2c port. */ | |
| if (HaveCS8420) | |
| /* 0=consumer, 1=pro */ | |
| initialize_cs8420(saa, 1); | |
| mdelay(5); | |
| if (HaveCS4341) | |
| initialize_cs4341(saa); | |
| } | |
| debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2); | |
| if (NewCard) | |
| set_genlock_offset(saa, 0); | |
| debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2); | |
| if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER, | |
| (ChipControl == 0x43 ? 0xe800 : 0xe000), 1)) { | |
| printk(KERN_ERR "stradis%d: IBM config failed\n", saa->nr); | |
| } | |
| if (HaveCS3310) { | |
| int i = CS3310MaxLvl; | |
| debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, ((i << 8)| i),2); | |
| } | |
| /* start video decoder */ | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2); | |
| /* 256k vid, 3520 bytes aud */ | |
| debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD, 0x4037, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2); | |
| ibm_send_command(saa, IBM_MP2_PLAY, 0, 0); | |
| /* enable buffer threshold irq */ | |
| debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2); | |
| /* clear pending interrupts */ | |
| debiread(saa, debNormal, IBM_MP2_HOST_INT, 2); | |
| debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2); | |
| return 0; | |
| } | |
| /* load the decoder microcode */ | |
| static int initialize_ibmmpeg2(struct video_code *microcode) | |
| { | |
| int i, num; | |
| struct saa7146 *saa; | |
| for (num = 0; num < saa_num; num++) { | |
| saa = &saa7146s[num]; | |
| /* check that FPGA is loaded */ | |
| debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0xa55a, 2); | |
| i = debiread(saa, debNormal, IBM_MP2_OSD_SIZE, 2); | |
| if (i != 0xa55a) { | |
| printk(KERN_INFO "stradis%d: %04x != 0xa55a\n", | |
| saa->nr, i); | |
| #if 0 | |
| return -1; | |
| #endif | |
| } | |
| if (!strncmp(microcode->loadwhat, "decoder.vid", 11)) { | |
| if (saa->boardcfg[0] > 27) | |
| continue; /* skip to next card */ | |
| /* load video control store */ | |
| saa->boardcfg[1] = 0x13; /* no-sync default */ | |
| debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2); | |
| for (i = 0; i < microcode->datasize / 2; i++) | |
| debiwrite(saa, debNormal, IBM_MP2_PROC_IDATA, | |
| (microcode->data[i * 2] << 8) | | |
| microcode->data[i * 2 + 1], 2); | |
| debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, | |
| ChipControl, 2); | |
| saa->boardcfg[0] = 28; | |
| } | |
| if (!strncmp(microcode->loadwhat, "decoder.aud", 11)) { | |
| if (saa->boardcfg[0] > 35) | |
| continue; /* skip to next card */ | |
| /* load audio control store */ | |
| debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2); | |
| for (i = 0; i < microcode->datasize; i++) | |
| debiwrite(saa, debNormal, IBM_MP2_AUD_IDATA, | |
| microcode->data[i], 1); | |
| debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2); | |
| if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER, | |
| 0xe000, 1)) { | |
| printk(KERN_ERR "stradis%d: IBM config " | |
| "failed\n", saa->nr); | |
| return -1; | |
| } | |
| /* set PWM to center value */ | |
| if (NewCard) { | |
| debiwrite(saa, debNormal, XILINX_PWM, | |
| saa->boardcfg[14] + | |
| (saa->boardcfg[13] << 8), 2); | |
| } else | |
| debiwrite(saa, debNormal, XILINX_PWM, 0x46, 2); | |
| if (HaveCS3310) { | |
| i = CS3310MaxLvl; | |
| debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, | |
| (i << 8) | i, 2); | |
| } | |
| printk(KERN_INFO "stradis%d: IBM MPEGCD%d Inited\n", | |
| saa->nr, 18 + (debiread(saa, debNormal, | |
| IBM_MP2_CHIP_CONTROL, 2) >> 12)); | |
| /* start video decoder */ | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, | |
| ChipControl, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD, 0x4037, | |
| 2); /* 256k vid, 3520 bytes aud */ | |
| debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2); | |
| ibm_send_command(saa, IBM_MP2_PLAY, 0, 0); | |
| /* enable buffer threshold irq */ | |
| debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2); | |
| debiread(saa, debNormal, IBM_MP2_HOST_INT, 2); | |
| /* enable gpio irq */ | |
| saawrite(0x00002000, SAA7146_GPIO_CTRL); | |
| /* enable decoder output to HPS */ | |
| debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2); | |
| saa->boardcfg[0] = 37; | |
| } | |
| } | |
| return 0; | |
| } | |
| static u32 palette2fmt[] = { /* some of these YUV translations are wrong */ | |
| 0xffffffff, 0x86000000, 0x87000000, 0x80000000, 0x8100000, 0x82000000, | |
| 0x83000000, 0x00000000, 0x03000000, 0x03000000, 0x0a00000, 0x03000000, | |
| 0x06000000, 0x00000000, 0x03000000, 0x0a000000, 0x0300000 | |
| }; | |
| static int bpp2fmt[4] = { | |
| VIDEO_PALETTE_HI240, VIDEO_PALETTE_RGB565, VIDEO_PALETTE_RGB24, | |
| VIDEO_PALETTE_RGB32 | |
| }; | |
| /* I wish I could find a formula to calculate these... */ | |
| static u32 h_prescale[64] = { | |
| 0x10000000, 0x18040202, 0x18080000, 0x380c0606, 0x38100204, 0x38140808, | |
| 0x38180000, 0x381c0000, 0x3820161c, 0x38242a3b, 0x38281230, 0x382c4460, | |
| 0x38301040, 0x38340080, 0x38380000, 0x383c0000, 0x3840fefe, 0x3844ee9f, | |
| 0x3848ee9f, 0x384cee9f, 0x3850ee9f, 0x38542a3b, 0x38581230, 0x385c0000, | |
| 0x38600000, 0x38640000, 0x38680000, 0x386c0000, 0x38700000, 0x38740000, | |
| 0x38780000, 0x387c0000, 0x30800000, 0x38840000, 0x38880000, 0x388c0000, | |
| 0x38900000, 0x38940000, 0x38980000, 0x389c0000, 0x38a00000, 0x38a40000, | |
| 0x38a80000, 0x38ac0000, 0x38b00000, 0x38b40000, 0x38b80000, 0x38bc0000, | |
| 0x38c00000, 0x38c40000, 0x38c80000, 0x38cc0000, 0x38d00000, 0x38d40000, | |
| 0x38d80000, 0x38dc0000, 0x38e00000, 0x38e40000, 0x38e80000, 0x38ec0000, | |
| 0x38f00000, 0x38f40000, 0x38f80000, 0x38fc0000, | |
| }; | |
| static u32 v_gain[64] = { | |
| 0x016000ff, 0x016100ff, 0x016100ff, 0x016200ff, 0x016200ff, 0x016200ff, | |
| 0x016200ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff, | |
| 0x016300ff, 0x016300ff, 0x016300ff, 0x016400ff, 0x016400ff, 0x016400ff, | |
| 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, | |
| 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, | |
| 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, | |
| 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, | |
| 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, | |
| 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, | |
| 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, | |
| 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, | |
| }; | |
| static void saa7146_set_winsize(struct saa7146 *saa) | |
| { | |
| u32 format; | |
| int offset, yacl, ysci; | |
| saa->win.color_fmt = format = | |
| (saa->win.depth == 15) ? palette2fmt[VIDEO_PALETTE_RGB555] : | |
| palette2fmt[bpp2fmt[(saa->win.bpp - 1) & 3]]; | |
| offset = saa->win.x * saa->win.bpp + saa->win.y * saa->win.bpl; | |
| saawrite(saa->win.vidadr + offset, SAA7146_BASE_EVEN1); | |
| saawrite(saa->win.vidadr + offset + saa->win.bpl, SAA7146_BASE_ODD1); | |
| saawrite(saa->win.bpl * 2, SAA7146_PITCH1); | |
| saawrite(saa->win.vidadr + saa->win.bpl * saa->win.sheight, | |
| SAA7146_PROT_ADDR1); | |
| saawrite(0, SAA7146_PAGE1); | |
| saawrite(format | 0x60, SAA7146_CLIP_FORMAT_CTRL); | |
| offset = (704 / (saa->win.width - 1)) & 0x3f; | |
| saawrite(h_prescale[offset], SAA7146_HPS_H_PRESCALE); | |
| offset = (720896 / saa->win.width) / (offset + 1); | |
| saawrite((offset << 12) | 0x0c, SAA7146_HPS_H_SCALE); | |
| if (CurrentMode == VIDEO_MODE_NTSC) { | |
| yacl = /*(480 / saa->win.height - 1) & 0x3f */ 0; | |
| ysci = 1024 - (saa->win.height * 1024 / 480); | |
| } else { | |
| yacl = /*(576 / saa->win.height - 1) & 0x3f */ 0; | |
| ysci = 1024 - (saa->win.height * 1024 / 576); | |
| } | |
| saawrite((1 << 31) | (ysci << 21) | (yacl << 15), SAA7146_HPS_V_SCALE); | |
| saawrite(v_gain[yacl], SAA7146_HPS_V_GAIN); | |
| saawrite(((SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_HPS_V | | |
| SAA7146_MC2_UPLD_HPS_H) << 16) | (SAA7146_MC2_UPLD_DMA1 | | |
| SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_HPS_H), SAA7146_MC2); | |
| } | |
| /* clip_draw_rectangle(cm,x,y,w,h) -- handle clipping an area | |
| * bitmap is fixed width, 128 bytes (1024 pixels represented) | |
| * arranged most-sigificant-bit-left in 32-bit words | |
| * based on saa7146 clipping hardware, it swaps bytes if LE | |
| * much of this makes up for egcs brain damage -- so if you | |
| * are wondering "why did he do this?" it is because the C | |
| * was adjusted to generate the optimal asm output without | |
| * writing non-portable __asm__ directives. | |
| */ | |
| static void clip_draw_rectangle(u32 *clipmap, int x, int y, int w, int h) | |
| { | |
| register int startword, endword; | |
| register u32 bitsleft, bitsright; | |
| u32 *temp; | |
| if (x < 0) { | |
| w += x; | |
| x = 0; | |
| } | |
| if (y < 0) { | |
| h += y; | |
| y = 0; | |
| } | |
| if (w <= 0 || h <= 0 || x > 1023 || y > 639) | |
| return; /* throw away bad clips */ | |
| if (x + w > 1024) | |
| w = 1024 - x; | |
| if (y + h > 640) | |
| h = 640 - y; | |
| startword = (x >> 5); | |
| endword = ((x + w) >> 5); | |
| bitsleft = (0xffffffff >> (x & 31)); | |
| bitsright = (0xffffffff << (~((x + w) - (endword << 5)))); | |
| temp = &clipmap[(y << 5) + startword]; | |
| w = endword - startword; | |
| if (!w) { | |
| bitsleft |= bitsright; | |
| for (y = 0; y < h; y++) { | |
| *temp |= bitsleft; | |
| temp += 32; | |
| } | |
| } else { | |
| for (y = 0; y < h; y++) { | |
| *temp++ |= bitsleft; | |
| for (x = 1; x < w; x++) | |
| *temp++ = 0xffffffff; | |
| *temp |= bitsright; | |
| temp += (32 - w); | |
| } | |
| } | |
| } | |
| static void make_clip_tab(struct saa7146 *saa, struct video_clip *cr, int ncr) | |
| { | |
| int i, width, height; | |
| u32 *clipmap; | |
| clipmap = saa->dmavid2; | |
| if ((width = saa->win.width) > 1023) | |
| width = 1023; /* sanity check */ | |
| if ((height = saa->win.height) > 640) | |
| height = 639; /* sanity check */ | |
| if (ncr > 0) { /* rectangles pased */ | |
| /* convert rectangular clips to a bitmap */ | |
| memset(clipmap, 0, VIDEO_CLIPMAP_SIZE); /* clear map */ | |
| for (i = 0; i < ncr; i++) | |
| clip_draw_rectangle(clipmap, cr[i].x, cr[i].y, | |
| cr[i].width, cr[i].height); | |
| } | |
| /* clip against viewing window AND screen | |
| so we do not have to rely on the user program | |
| */ | |
| clip_draw_rectangle(clipmap, (saa->win.x + width > saa->win.swidth) ? | |
| (saa->win.swidth - saa->win.x) : width, 0, 1024, 768); | |
| clip_draw_rectangle(clipmap, 0, | |
| (saa->win.y + height > saa->win.sheight) ? | |
| (saa->win.sheight - saa->win.y) : height, 1024, 768); | |
| if (saa->win.x < 0) | |
| clip_draw_rectangle(clipmap, 0, 0, -saa->win.x, 768); | |
| if (saa->win.y < 0) | |
| clip_draw_rectangle(clipmap, 0, 0, 1024, -saa->win.y); | |
| } | |
| static int saa_ioctl(struct inode *inode, struct file *file, | |
| unsigned int cmd, unsigned long argl) | |
| { | |
| struct saa7146 *saa = file->private_data; | |
| void __user *arg = (void __user *)argl; | |
| switch (cmd) { | |
| case VIDIOCGCAP: | |
| { | |
| struct video_capability b; | |
| strcpy(b.name, saa->video_dev.name); | |
| b.type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY | | |
| VID_TYPE_CLIPPING | VID_TYPE_FRAMERAM | | |
| VID_TYPE_SCALES; | |
| b.channels = 1; | |
| b.audios = 1; | |
| b.maxwidth = 768; | |
| b.maxheight = 576; | |
| b.minwidth = 32; | |
| b.minheight = 32; | |
| if (copy_to_user(arg, &b, sizeof(b))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case VIDIOCGPICT: | |
| { | |
| struct video_picture p = saa->picture; | |
| if (saa->win.depth == 8) | |
| p.palette = VIDEO_PALETTE_HI240; | |
| if (saa->win.depth == 15) | |
| p.palette = VIDEO_PALETTE_RGB555; | |
| if (saa->win.depth == 16) | |
| p.palette = VIDEO_PALETTE_RGB565; | |
| if (saa->win.depth == 24) | |
| p.palette = VIDEO_PALETTE_RGB24; | |
| if (saa->win.depth == 32) | |
| p.palette = VIDEO_PALETTE_RGB32; | |
| if (copy_to_user(arg, &p, sizeof(p))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case VIDIOCSPICT: | |
| { | |
| struct video_picture p; | |
| u32 format; | |
| if (copy_from_user(&p, arg, sizeof(p))) | |
| return -EFAULT; | |
| if (p.palette < sizeof(palette2fmt) / sizeof(u32)) { | |
| format = palette2fmt[p.palette]; | |
| saa->win.color_fmt = format; | |
| saawrite(format | 0x60, | |
| SAA7146_CLIP_FORMAT_CTRL); | |
| } | |
| saawrite(((p.brightness & 0xff00) << 16) | | |
| ((p.contrast & 0xfe00) << 7) | | |
| ((p.colour & 0xfe00) >> 9), SAA7146_BCS_CTRL); | |
| saa->picture = p; | |
| /* upload changed registers */ | |
| saawrite(((SAA7146_MC2_UPLD_HPS_H | | |
| SAA7146_MC2_UPLD_HPS_V) << 16) | | |
| SAA7146_MC2_UPLD_HPS_H | | |
| SAA7146_MC2_UPLD_HPS_V, SAA7146_MC2); | |
| return 0; | |
| } | |
| case VIDIOCSWIN: | |
| { | |
| struct video_window vw; | |
| struct video_clip *vcp = NULL; | |
| if (copy_from_user(&vw, arg, sizeof(vw))) | |
| return -EFAULT; | |
| /* stop capture */ | |
| if (vw.flags || vw.width < 16 || vw.height < 16) { | |
| saawrite((SAA7146_MC1_TR_E_1 << 16), | |
| SAA7146_MC1); | |
| return -EINVAL; | |
| } | |
| /* 32-bit align start and adjust width */ | |
| if (saa->win.bpp < 4) { | |
| int i = vw.x; | |
| vw.x = (vw.x + 3) & ~3; | |
| i = vw.x - i; | |
| vw.width -= i; | |
| } | |
| saa->win.x = vw.x; | |
| saa->win.y = vw.y; | |
| saa->win.width = vw.width; | |
| if (saa->win.width > 768) | |
| saa->win.width = 768; | |
| saa->win.height = vw.height; | |
| if (CurrentMode == VIDEO_MODE_NTSC) { | |
| if (saa->win.height > 480) | |
| saa->win.height = 480; | |
| } else { | |
| if (saa->win.height > 576) | |
| saa->win.height = 576; | |
| } | |
| /* stop capture */ | |
| saawrite((SAA7146_MC1_TR_E_1 << 16), SAA7146_MC1); | |
| saa7146_set_winsize(saa); | |
| /* | |
| * Do any clips. | |
| */ | |
| if (vw.clipcount < 0) { | |
| if (copy_from_user(saa->dmavid2, vw.clips, | |
| VIDEO_CLIPMAP_SIZE)) | |
| return -EFAULT; | |
| } else if (vw.clipcount > 16384) { | |
| return -EINVAL; | |
| } else if (vw.clipcount > 0) { | |
| vcp = vmalloc(sizeof(struct video_clip) * | |
| vw.clipcount); | |
| if (vcp == NULL) | |
| return -ENOMEM; | |
| if (copy_from_user(vcp, vw.clips, | |
| sizeof(struct video_clip) * | |
| vw.clipcount)) { | |
| vfree(vcp); | |
| return -EFAULT; | |
| } | |
| } else /* nothing clipped */ | |
| memset(saa->dmavid2, 0, VIDEO_CLIPMAP_SIZE); | |
| make_clip_tab(saa, vcp, vw.clipcount); | |
| if (vw.clipcount > 0) | |
| vfree(vcp); | |
| /* start capture & clip dma if we have an address */ | |
| if ((saa->cap & 3) && saa->win.vidadr != 0) | |
| saawrite(((SAA7146_MC1_TR_E_1 | | |
| SAA7146_MC1_TR_E_2) << 16) | 0xffff, | |
| SAA7146_MC1); | |
| return 0; | |
| } | |
| case VIDIOCGWIN: | |
| { | |
| struct video_window vw; | |
| vw.x = saa->win.x; | |
| vw.y = saa->win.y; | |
| vw.width = saa->win.width; | |
| vw.height = saa->win.height; | |
| vw.chromakey = 0; | |
| vw.flags = 0; | |
| if (copy_to_user(arg, &vw, sizeof(vw))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case VIDIOCCAPTURE: | |
| { | |
| int v; | |
| if (copy_from_user(&v, arg, sizeof(v))) | |
| return -EFAULT; | |
| if (v == 0) { | |
| saa->cap &= ~1; | |
| saawrite((SAA7146_MC1_TR_E_1 << 16), | |
| SAA7146_MC1); | |
| } else { | |
| if (saa->win.vidadr == 0 || saa->win.width == 0 | |
| || saa->win.height == 0) | |
| return -EINVAL; | |
| saa->cap |= 1; | |
| saawrite((SAA7146_MC1_TR_E_1 << 16) | 0xffff, | |
| SAA7146_MC1); | |
| } | |
| return 0; | |
| } | |
| case VIDIOCGFBUF: | |
| { | |
| struct video_buffer v; | |
| v.base = (void *)saa->win.vidadr; | |
| v.height = saa->win.sheight; | |
| v.width = saa->win.swidth; | |
| v.depth = saa->win.depth; | |
| v.bytesperline = saa->win.bpl; | |
| if (copy_to_user(arg, &v, sizeof(v))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case VIDIOCSFBUF: | |
| { | |
| struct video_buffer v; | |
| if (!capable(CAP_SYS_ADMIN)) | |
| return -EPERM; | |
| if (copy_from_user(&v, arg, sizeof(v))) | |
| return -EFAULT; | |
| if (v.depth != 8 && v.depth != 15 && v.depth != 16 && | |
| v.depth != 24 && v.depth != 32 && v.width > 16 && | |
| v.height > 16 && v.bytesperline > 16) | |
| return -EINVAL; | |
| if (v.base) | |
| saa->win.vidadr = (unsigned long)v.base; | |
| saa->win.sheight = v.height; | |
| saa->win.swidth = v.width; | |
| saa->win.bpp = ((v.depth + 7) & 0x38) / 8; | |
| saa->win.depth = v.depth; | |
| saa->win.bpl = v.bytesperline; | |
| DEBUG(printk("Display at %p is %d by %d, bytedepth %d, " | |
| "bpl %d\n", v.base, v.width, v.height, | |
| saa->win.bpp, saa->win.bpl)); | |
| saa7146_set_winsize(saa); | |
| return 0; | |
| } | |
| case VIDIOCKEY: | |
| { | |
| /* Will be handled higher up .. */ | |
| return 0; | |
| } | |
| case VIDIOCGAUDIO: | |
| { | |
| struct video_audio v; | |
| v = saa->audio_dev; | |
| v.flags &= ~(VIDEO_AUDIO_MUTE | VIDEO_AUDIO_MUTABLE); | |
| v.flags |= VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME; | |
| strcpy(v.name, "MPEG"); | |
| v.mode = VIDEO_SOUND_STEREO; | |
| if (copy_to_user(arg, &v, sizeof(v))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case VIDIOCSAUDIO: | |
| { | |
| struct video_audio v; | |
| int i; | |
| if (copy_from_user(&v, arg, sizeof(v))) | |
| return -EFAULT; | |
| i = (~(v.volume >> 8)) & 0xff; | |
| if (!HaveCS4341) { | |
| if (v.flags & VIDEO_AUDIO_MUTE) | |
| debiwrite(saa, debNormal, | |
| IBM_MP2_FRNT_ATTEN, 0xffff, 2); | |
| if (!(v.flags & VIDEO_AUDIO_MUTE)) | |
| debiwrite(saa, debNormal, | |
| IBM_MP2_FRNT_ATTEN, 0x0000, 2); | |
| if (v.flags & VIDEO_AUDIO_VOLUME) | |
| debiwrite(saa, debNormal, | |
| IBM_MP2_FRNT_ATTEN, | |
| (i << 8) | i, 2); | |
| } else { | |
| if (v.flags & VIDEO_AUDIO_MUTE) | |
| cs4341_setlevel(saa, 0xff, 0xff); | |
| if (!(v.flags & VIDEO_AUDIO_MUTE)) | |
| cs4341_setlevel(saa, 0, 0); | |
| if (v.flags & VIDEO_AUDIO_VOLUME) | |
| cs4341_setlevel(saa, i, i); | |
| } | |
| saa->audio_dev = v; | |
| return 0; | |
| } | |
| case VIDIOCGUNIT: | |
| { | |
| struct video_unit vu; | |
| vu.video = saa->video_dev.minor; | |
| vu.vbi = VIDEO_NO_UNIT; | |
| vu.radio = VIDEO_NO_UNIT; | |
| vu.audio = VIDEO_NO_UNIT; | |
| vu.teletext = VIDEO_NO_UNIT; | |
| if (copy_to_user(arg, &vu, sizeof(vu))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case VIDIOCSPLAYMODE: | |
| { | |
| struct video_play_mode pmode; | |
| if (copy_from_user((void *)&pmode, arg, | |
| sizeof(struct video_play_mode))) | |
| return -EFAULT; | |
| switch (pmode.mode) { | |
| case VID_PLAY_VID_OUT_MODE: | |
| if (pmode.p1 != VIDEO_MODE_NTSC && | |
| pmode.p1 != VIDEO_MODE_PAL) | |
| return -EINVAL; | |
| set_out_format(saa, pmode.p1); | |
| return 0; | |
| case VID_PLAY_GENLOCK: | |
| debiwrite(saa, debNormal, XILINX_CTL0, | |
| pmode.p1 ? 0x8000 : 0x8080, 2); | |
| if (NewCard) | |
| set_genlock_offset(saa, pmode.p2); | |
| return 0; | |
| case VID_PLAY_NORMAL: | |
| debiwrite(saa, debNormal, | |
| IBM_MP2_CHIP_CONTROL, ChipControl, 2); | |
| ibm_send_command(saa, IBM_MP2_PLAY, 0, 0); | |
| saa->playmode = pmode.mode; | |
| return 0; | |
| case VID_PLAY_PAUSE: | |
| /* IBM removed the PAUSE command */ | |
| /* they say use SINGLE_FRAME now */ | |
| case VID_PLAY_SINGLE_FRAME: | |
| ibm_send_command(saa, IBM_MP2_SINGLE_FRAME,0,0); | |
| if (saa->playmode == pmode.mode) { | |
| debiwrite(saa, debNormal, | |
| IBM_MP2_CHIP_CONTROL, | |
| ChipControl, 2); | |
| } | |
| saa->playmode = pmode.mode; | |
| return 0; | |
| case VID_PLAY_FAST_FORWARD: | |
| ibm_send_command(saa, IBM_MP2_FAST_FORWARD,0,0); | |
| saa->playmode = pmode.mode; | |
| return 0; | |
| case VID_PLAY_SLOW_MOTION: | |
| ibm_send_command(saa, IBM_MP2_SLOW_MOTION, | |
| pmode.p1, 0); | |
| saa->playmode = pmode.mode; | |
| return 0; | |
| case VID_PLAY_IMMEDIATE_NORMAL: | |
| /* ensure transfers resume */ | |
| debiwrite(saa, debNormal, | |
| IBM_MP2_CHIP_CONTROL, ChipControl, 2); | |
| ibm_send_command(saa, IBM_MP2_IMED_NORM_PLAY, | |
| 0, 0); | |
| saa->playmode = VID_PLAY_NORMAL; | |
| return 0; | |
| case VID_PLAY_SWITCH_CHANNELS: | |
| saa->audhead = saa->audtail = 0; | |
| saa->vidhead = saa->vidtail = 0; | |
| ibm_send_command(saa, IBM_MP2_FREEZE_FRAME,0,1); | |
| ibm_send_command(saa, IBM_MP2_RESET_AUD_RATE, | |
| 0, 1); | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, | |
| 0, 2); | |
| ibm_send_command(saa, IBM_MP2_CHANNEL_SWITCH, | |
| 0, 1); | |
| debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, | |
| ChipControl, 2); | |
| ibm_send_command(saa, IBM_MP2_PLAY, 0, 0); | |
| saa->playmode = VID_PLAY_NORMAL; | |
| return 0; | |
| case VID_PLAY_FREEZE_FRAME: | |
| ibm_send_command(saa, IBM_MP2_FREEZE_FRAME,0,0); | |
| saa->playmode = pmode.mode; | |
| return 0; | |
| case VID_PLAY_STILL_MODE: | |
| ibm_send_command(saa, IBM_MP2_SET_STILL_MODE, | |
| 0, 0); | |
| saa->playmode = pmode.mode; | |
| return 0; | |
| case VID_PLAY_MASTER_MODE: | |
| if (pmode.p1 == VID_PLAY_MASTER_NONE) | |
| saa->boardcfg[1] = 0x13; | |
| else if (pmode.p1 == VID_PLAY_MASTER_VIDEO) | |
| saa->boardcfg[1] = 0x23; | |
| else if (pmode.p1 == VID_PLAY_MASTER_AUDIO) | |
| saa->boardcfg[1] = 0x43; | |
| else | |
| return -EINVAL; | |
| debiwrite(saa, debNormal, | |
| IBM_MP2_CHIP_CONTROL, ChipControl, 2); | |
| return 0; | |
| case VID_PLAY_ACTIVE_SCANLINES: | |
| if (CurrentMode == VIDEO_MODE_PAL) { | |
| if (pmode.p1 < 1 || pmode.p2 > 625) | |
| return -EINVAL; | |
| saa->boardcfg[5] = pmode.p1; | |
| saa->boardcfg[55] = (pmode.p1 + | |
| (pmode.p2 / 2) - 1) & 0xff; | |
| } else { | |
| if (pmode.p1 < 4 || pmode.p2 > 525) | |
| return -EINVAL; | |
| saa->boardcfg[4] = pmode.p1; | |
| saa->boardcfg[54] = (pmode.p1 + | |
| (pmode.p2 / 2) - 4) & 0xff; | |
| } | |
| set_out_format(saa, CurrentMode); | |
| case VID_PLAY_RESET: | |
| return do_ibm_reset(saa); | |
| case VID_PLAY_END_MARK: | |
| if (saa->endmarktail < saa->endmarkhead) { | |
| if (saa->endmarkhead - | |
| saa->endmarktail < 2) | |
| return -ENOSPC; | |
| } else if (saa->endmarkhead <=saa->endmarktail){ | |
| if (saa->endmarktail - saa->endmarkhead | |
| > (MAX_MARKS - 2)) | |
| return -ENOSPC; | |
| } else | |
| return -ENOSPC; | |
| saa->endmark[saa->endmarktail] = saa->audtail; | |
| saa->endmarktail++; | |
| if (saa->endmarktail >= MAX_MARKS) | |
| saa->endmarktail = 0; | |
| } | |
| return -EINVAL; | |
| } | |
| case VIDIOCSWRITEMODE: | |
| { | |
| int mode; | |
| if (copy_from_user((void *)&mode, arg, sizeof(int))) | |
| return -EFAULT; | |
| if (mode == VID_WRITE_MPEG_AUD || | |
| mode == VID_WRITE_MPEG_VID || | |
| mode == VID_WRITE_CC || | |
| mode == VID_WRITE_TTX || | |
| mode == VID_WRITE_OSD) { | |
| saa->writemode = mode; | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| case VIDIOCSMICROCODE: | |
| { | |
| struct video_code ucode; | |
| __u8 *udata; | |
| int i; | |
| if (copy_from_user(&ucode, arg, sizeof(ucode))) | |
| return -EFAULT; | |
| if (ucode.datasize > 65536 || ucode.datasize < 1024 || | |
| strncmp(ucode.loadwhat, "dec", 3)) | |
| return -EINVAL; | |
| if ((udata = vmalloc(ucode.datasize)) == NULL) | |
| return -ENOMEM; | |
| if (copy_from_user(udata, ucode.data, ucode.datasize)) { | |
| vfree(udata); | |
| return -EFAULT; | |
| } | |
| ucode.data = udata; | |
| if (!strncmp(ucode.loadwhat, "decoder.aud", 11) || | |
| !strncmp(ucode.loadwhat, "decoder.vid", 11)) | |
| i = initialize_ibmmpeg2(&ucode); | |
| else | |
| i = initialize_fpga(&ucode); | |
| vfree(udata); | |
| if (i) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| case VIDIOCGCHAN: /* this makes xawtv happy */ | |
| { | |
| struct video_channel v; | |
| if (copy_from_user(&v, arg, sizeof(v))) | |
| return -EFAULT; | |
| v.flags = VIDEO_VC_AUDIO; | |
| v.tuners = 0; | |
| v.type = VID_TYPE_MPEG_DECODER; | |
| v.norm = CurrentMode; | |
| strcpy(v.name, "MPEG2"); | |
| if (copy_to_user(arg, &v, sizeof(v))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case VIDIOCSCHAN: /* this makes xawtv happy */ | |
| { | |
| struct video_channel v; | |
| if (copy_from_user(&v, arg, sizeof(v))) | |
| return -EFAULT; | |
| /* do nothing */ | |
| return 0; | |
| } | |
| default: | |
| return -ENOIOCTLCMD; | |
| } | |
| return 0; | |
| } | |
| static int saa_mmap(struct file *file, struct vm_area_struct *vma) | |
| { | |
| struct saa7146 *saa = file->private_data; | |
| printk(KERN_DEBUG "stradis%d: saa_mmap called\n", saa->nr); | |
| return -EINVAL; | |
| } | |
| static ssize_t saa_read(struct file *file, char __user * buf, | |
| size_t count, loff_t * ppos) | |
| { | |
| return -EINVAL; | |
| } | |
| static ssize_t saa_write(struct file *file, const char __user * buf, | |
| size_t count, loff_t * ppos) | |
| { | |
| struct saa7146 *saa = file->private_data; | |
| unsigned long todo = count; | |
| int blocksize, split; | |
| unsigned long flags; | |
| while (todo > 0) { | |
| if (saa->writemode == VID_WRITE_MPEG_AUD) { | |
| spin_lock_irqsave(&saa->lock, flags); | |
| if (saa->audhead <= saa->audtail) | |
| blocksize = 65536 - | |
| (saa->audtail - saa->audhead); | |
| else | |
| blocksize = saa->audhead - saa->audtail; | |
| spin_unlock_irqrestore(&saa->lock, flags); | |
| if (blocksize < 16384) { | |
| saawrite(SAA7146_PSR_DEBI_S | | |
| SAA7146_PSR_PIN1, SAA7146_IER); | |
| saawrite(SAA7146_PSR_PIN1, SAA7146_PSR); | |
| /* wait for buffer space to open */ | |
| interruptible_sleep_on(&saa->audq); | |
| } | |
| spin_lock_irqsave(&saa->lock, flags); | |
| if (saa->audhead <= saa->audtail) { | |
| blocksize = 65536 - | |
| (saa->audtail - saa->audhead); | |
| split = 65536 - saa->audtail; | |
| } else { | |
| blocksize = saa->audhead - saa->audtail; | |
| split = 65536; | |
| } | |
| spin_unlock_irqrestore(&saa->lock, flags); | |
| blocksize--; | |
| if (blocksize > todo) | |
| blocksize = todo; | |
| /* double check that we really have space */ | |
| if (!blocksize) | |
| return -ENOSPC; | |
| if (split < blocksize) { | |
| if (copy_from_user(saa->audbuf + | |
| saa->audtail, buf, split)) | |
| return -EFAULT; | |
| buf += split; | |
| todo -= split; | |
| blocksize -= split; | |
| saa->audtail = 0; | |
| } | |
| if (copy_from_user(saa->audbuf + saa->audtail, buf, | |
| blocksize)) | |
| return -EFAULT; | |
| saa->audtail += blocksize; | |
| todo -= blocksize; | |
| buf += blocksize; | |
| saa->audtail &= 0xffff; | |
| } else if (saa->writemode == VID_WRITE_MPEG_VID) { | |
| spin_lock_irqsave(&saa->lock, flags); | |
| if (saa->vidhead <= saa->vidtail) | |
| blocksize = 524288 - | |
| (saa->vidtail - saa->vidhead); | |
| else | |
| blocksize = saa->vidhead - saa->vidtail; | |
| spin_unlock_irqrestore(&saa->lock, flags); | |
| if (blocksize < 65536) { | |
| saawrite(SAA7146_PSR_DEBI_S | | |
| SAA7146_PSR_PIN1, SAA7146_IER); | |
| saawrite(SAA7146_PSR_PIN1, SAA7146_PSR); | |
| /* wait for buffer space to open */ | |
| interruptible_sleep_on(&saa->vidq); | |
| } | |
| spin_lock_irqsave(&saa->lock, flags); | |
| if (saa->vidhead <= saa->vidtail) { | |
| blocksize = 524288 - | |
| (saa->vidtail - saa->vidhead); | |
| split = 524288 - saa->vidtail; | |
| } else { | |
| blocksize = saa->vidhead - saa->vidtail; | |
| split = 524288; | |
| } | |
| spin_unlock_irqrestore(&saa->lock, flags); | |
| blocksize--; | |
| if (blocksize > todo) | |
| blocksize = todo; | |
| /* double check that we really have space */ | |
| if (!blocksize) | |
| return -ENOSPC; | |
| if (split < blocksize) { | |
| if (copy_from_user(saa->vidbuf + | |
| saa->vidtail, buf, split)) | |
| return -EFAULT; | |
| buf += split; | |
| todo -= split; | |
| blocksize -= split; | |
| saa->vidtail = 0; | |
| } | |
| if (copy_from_user(saa->vidbuf + saa->vidtail, buf, | |
| blocksize)) | |
| return -EFAULT; | |
| saa->vidtail += blocksize; | |
| todo -= blocksize; | |
| buf += blocksize; | |
| saa->vidtail &= 0x7ffff; | |
| } else if (saa->writemode == VID_WRITE_OSD) { | |
| if (count > 131072) | |
| return -ENOSPC; | |
| if (copy_from_user(saa->osdbuf, buf, count)) | |
| return -EFAULT; | |
| buf += count; | |
| saa->osdhead = 0; | |
| saa->osdtail = count; | |
| debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR, 0, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_OSD_LINK_ADDR, 0, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00d, 2); | |
| debiwrite(saa, debNormal, IBM_MP2_DISP_MODE, | |
| debiread(saa, debNormal, | |
| IBM_MP2_DISP_MODE, 2) | 1, 2); | |
| /* trigger osd data transfer */ | |
| saawrite(SAA7146_PSR_DEBI_S | | |
| SAA7146_PSR_PIN1, SAA7146_IER); | |
| saawrite(SAA7146_PSR_PIN1, SAA7146_PSR); | |
| } | |
| } | |
| return count; | |
| } | |
| static int saa_open(struct inode *inode, struct file *file) | |
| { | |
| struct video_device *vdev = video_devdata(file); | |
| struct saa7146 *saa = container_of(vdev, struct saa7146, video_dev); | |
| file->private_data = saa; | |
| saa->user++; | |
| if (saa->user > 1) | |
| return 0; /* device open already, don't reset */ | |
| saa->writemode = VID_WRITE_MPEG_VID; /* default to video */ | |
| return 0; | |
| } | |
| static int saa_release(struct inode *inode, struct file *file) | |
| { | |
| struct saa7146 *saa = file->private_data; | |
| saa->user--; | |
| if (saa->user > 0) /* still someone using device */ | |
| return 0; | |
| saawrite(0x007f0000, SAA7146_MC1); /* stop all overlay dma */ | |
| return 0; | |
| } | |
| static struct file_operations saa_fops = { | |
| .owner = THIS_MODULE, | |
| .open = saa_open, | |
| .release = saa_release, | |
| .ioctl = saa_ioctl, | |
| .compat_ioctl = v4l_compat_ioctl32, | |
| .read = saa_read, | |
| .llseek = no_llseek, | |
| .write = saa_write, | |
| .mmap = saa_mmap, | |
| }; | |
| /* template for video_device-structure */ | |
| static struct video_device saa_template = { | |
| .name = "SAA7146A", | |
| .type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY, | |
| .hardware = VID_HARDWARE_SAA7146, | |
| .fops = &saa_fops, | |
| .minor = -1, | |
| }; | |
| static int __devinit configure_saa7146(struct pci_dev *pdev, int num) | |
| { | |
| int retval; | |
| struct saa7146 *saa = pci_get_drvdata(pdev); | |
| saa->endmarkhead = saa->endmarktail = 0; | |
| saa->win.x = saa->win.y = 0; | |
| saa->win.width = saa->win.cropwidth = 720; | |
| saa->win.height = saa->win.cropheight = 480; | |
| saa->win.cropx = saa->win.cropy = 0; | |
| saa->win.bpp = 2; | |
| saa->win.depth = 16; | |
| saa->win.color_fmt = palette2fmt[VIDEO_PALETTE_RGB565]; | |
| saa->win.bpl = 1024 * saa->win.bpp; | |
| saa->win.swidth = 1024; | |
| saa->win.sheight = 768; | |
| saa->picture.brightness = 32768; | |
| saa->picture.contrast = 38768; | |
| saa->picture.colour = 32768; | |
| saa->cap = 0; | |
| saa->nr = num; | |
| saa->playmode = VID_PLAY_NORMAL; | |
| memset(saa->boardcfg, 0, 64); /* clear board config area */ | |
| saa->saa7146_mem = NULL; | |
| saa->dmavid1 = saa->dmavid2 = saa->dmavid3 = saa->dmaa1in = | |
| saa->dmaa1out = saa->dmaa2in = saa->dmaa2out = | |
| saa->pagevid1 = saa->pagevid2 = saa->pagevid3 = saa->pagea1in = | |
| saa->pagea1out = saa->pagea2in = saa->pagea2out = | |
| saa->pagedebi = saa->dmaRPS1 = saa->dmaRPS2 = saa->pageRPS1 = | |
| saa->pageRPS2 = NULL; | |
| saa->audbuf = saa->vidbuf = saa->osdbuf = saa->dmadebi = NULL; | |
| saa->audhead = saa->vidtail = 0; | |
| init_waitqueue_head(&saa->i2cq); | |
| init_waitqueue_head(&saa->audq); | |
| init_waitqueue_head(&saa->debiq); | |
| init_waitqueue_head(&saa->vidq); | |
| spin_lock_init(&saa->lock); | |
| retval = pci_enable_device(pdev); | |
| if (retval) { | |
| dev_err(&pdev->dev, "%d: pci_enable_device failed!\n", num); | |
| goto err; | |
| } | |
| saa->id = pdev->device; | |
| saa->irq = pdev->irq; | |
| saa->video_dev.minor = -1; | |
| saa->saa7146_adr = pci_resource_start(pdev, 0); | |
| pci_read_config_byte(pdev, PCI_CLASS_REVISION, &saa->revision); | |
| saa->saa7146_mem = ioremap(saa->saa7146_adr, 0x200); | |
| if (saa->saa7146_mem == NULL) { | |
| dev_err(&pdev->dev, "%d: ioremap failed!\n", num); | |
| retval = -EIO; | |
| goto err; | |
| } | |
| memcpy(&saa->video_dev, &saa_template, sizeof(saa_template)); | |
| saawrite(0, SAA7146_IER); /* turn off all interrupts */ | |
| retval = request_irq(saa->irq, saa7146_irq, IRQF_SHARED | IRQF_DISABLED, | |
| "stradis", saa); | |
| if (retval == -EINVAL) | |
| dev_err(&pdev->dev, "%d: Bad irq number or handler\n", num); | |
| else if (retval == -EBUSY) | |
| dev_err(&pdev->dev, "%d: IRQ %ld busy, change your PnP config " | |
| "in BIOS\n", num, saa->irq); | |
| if (retval < 0) | |
| goto errio; | |
| pci_set_master(pdev); | |
| retval = video_register_device(&saa->video_dev, VFL_TYPE_GRABBER, | |
| video_nr); | |
| if (retval < 0) { | |
| dev_err(&pdev->dev, "%d: error in registering video device!\n", | |
| num); | |
| goto errio; | |
| } | |
| return 0; | |
| errio: | |
| iounmap(saa->saa7146_mem); | |
| err: | |
| return retval; | |
| } | |
| static int __devinit init_saa7146(struct pci_dev *pdev) | |
| { | |
| struct saa7146 *saa = pci_get_drvdata(pdev); | |
| saa->user = 0; | |
| /* reset the saa7146 */ | |
| saawrite(0xffff0000, SAA7146_MC1); | |
| mdelay(5); | |
| /* enable debi and i2c transfers and pins */ | |
| saawrite(((SAA7146_MC1_EDP | SAA7146_MC1_EI2C | | |
| SAA7146_MC1_TR_E_DEBI) << 16) | 0xffff, SAA7146_MC1); | |
| /* ensure proper state of chip */ | |
| saawrite(0x00000000, SAA7146_PAGE1); | |
| saawrite(0x00f302c0, SAA7146_NUM_LINE_BYTE1); | |
| saawrite(0x00000000, SAA7146_PAGE2); | |
| saawrite(0x01400080, SAA7146_NUM_LINE_BYTE2); | |
| saawrite(0x00000000, SAA7146_DD1_INIT); | |
| saawrite(0x00000000, SAA7146_DD1_STREAM_B); | |
| saawrite(0x00000000, SAA7146_DD1_STREAM_A); | |
| saawrite(0x00000000, SAA7146_BRS_CTRL); | |
| saawrite(0x80400040, SAA7146_BCS_CTRL); | |
| saawrite(0x0000e000 /*| (1<<29) */ , SAA7146_HPS_CTRL); | |
| saawrite(0x00000060, SAA7146_CLIP_FORMAT_CTRL); | |
| saawrite(0x00000000, SAA7146_ACON1); | |
| saawrite(0x00000000, SAA7146_ACON2); | |
| saawrite(0x00000600, SAA7146_I2C_STATUS); | |
| saawrite(((SAA7146_MC2_UPLD_D1_B | SAA7146_MC2_UPLD_D1_A | | |
| SAA7146_MC2_UPLD_BRS | SAA7146_MC2_UPLD_HPS_H | | |
| SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_DMA2 | | |
| SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_I2C) << 16) | 0xffff, | |
| SAA7146_MC2); | |
| /* setup arbitration control registers */ | |
| saawrite(0x1412121a, SAA7146_PCI_BT_V1); | |
| /* allocate 32k dma buffer + 4k for page table */ | |
| if ((saa->dmadebi = kmalloc(32768 + 4096, GFP_KERNEL)) == NULL) { | |
| dev_err(&pdev->dev, "%d: debi kmalloc failed\n", saa->nr); | |
| goto err; | |
| } | |
| #if 0 | |
| saa->pagedebi = saa->dmadebi + 32768; /* top 4k is for mmu */ | |
| saawrite(virt_to_bus(saa->pagedebi) /*|0x800 */ , SAA7146_DEBI_PAGE); | |
| for (i = 0; i < 12; i++) /* setup mmu page table */ | |
| saa->pagedebi[i] = virt_to_bus((saa->dmadebi + i * 4096)); | |
| #endif | |
| saa->audhead = saa->vidhead = saa->osdhead = 0; | |
| saa->audtail = saa->vidtail = saa->osdtail = 0; | |
| if (saa->vidbuf == NULL && (saa->vidbuf = vmalloc(524288)) == NULL) { | |
| dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr); | |
| goto err; | |
| } | |
| if (saa->audbuf == NULL && (saa->audbuf = vmalloc(65536)) == NULL) { | |
| dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr); | |
| goto errfree; | |
| } | |
| if (saa->osdbuf == NULL && (saa->osdbuf = vmalloc(131072)) == NULL) { | |
| dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr); | |
| goto errfree; | |
| } | |
| /* allocate 81920 byte buffer for clipping */ | |
| if ((saa->dmavid2 = kzalloc(VIDEO_CLIPMAP_SIZE, GFP_KERNEL)) == NULL) { | |
| dev_err(&pdev->dev, "%d: clip kmalloc failed\n", saa->nr); | |
| goto errfree; | |
| } | |
| /* setup clipping registers */ | |
| saawrite(virt_to_bus(saa->dmavid2), SAA7146_BASE_EVEN2); | |
| saawrite(virt_to_bus(saa->dmavid2) + 128, SAA7146_BASE_ODD2); | |
| saawrite(virt_to_bus(saa->dmavid2) + VIDEO_CLIPMAP_SIZE, | |
| SAA7146_PROT_ADDR2); | |
| saawrite(256, SAA7146_PITCH2); | |
| saawrite(4, SAA7146_PAGE2); /* dma direction: read, no byteswap */ | |
| saawrite(((SAA7146_MC2_UPLD_DMA2) << 16) | SAA7146_MC2_UPLD_DMA2, | |
| SAA7146_MC2); | |
| I2CBusScan(saa); | |
| return 0; | |
| errfree: | |
| vfree(saa->osdbuf); | |
| vfree(saa->audbuf); | |
| vfree(saa->vidbuf); | |
| saa->audbuf = saa->osdbuf = saa->vidbuf = NULL; | |
| err: | |
| return -ENOMEM; | |
| } | |
| static void stradis_release_saa(struct pci_dev *pdev) | |
| { | |
| u8 command; | |
| struct saa7146 *saa = pci_get_drvdata(pdev); | |
| /* turn off all capturing, DMA and IRQs */ | |
| saawrite(0xffff0000, SAA7146_MC1); /* reset chip */ | |
| saawrite(0, SAA7146_MC2); | |
| saawrite(0, SAA7146_IER); | |
| saawrite(0xffffffffUL, SAA7146_ISR); | |
| /* disable PCI bus-mastering */ | |
| pci_read_config_byte(pdev, PCI_COMMAND, &command); | |
| command &= ~PCI_COMMAND_MASTER; | |
| pci_write_config_byte(pdev, PCI_COMMAND, command); | |
| /* unmap and free memory */ | |
| saa->audhead = saa->audtail = saa->osdhead = 0; | |
| saa->vidhead = saa->vidtail = saa->osdtail = 0; | |
| vfree(saa->vidbuf); | |
| vfree(saa->audbuf); | |
| vfree(saa->osdbuf); | |
| kfree(saa->dmavid2); | |
| saa->audbuf = saa->vidbuf = saa->osdbuf = NULL; | |
| saa->dmavid2 = NULL; | |
| kfree(saa->dmadebi); | |
| kfree(saa->dmavid1); | |
| kfree(saa->dmavid3); | |
| kfree(saa->dmaa1in); | |
| kfree(saa->dmaa1out); | |
| kfree(saa->dmaa2in); | |
| kfree(saa->dmaa2out); | |
| kfree(saa->dmaRPS1); | |
| kfree(saa->dmaRPS2); | |
| free_irq(saa->irq, saa); | |
| if (saa->saa7146_mem) | |
| iounmap(saa->saa7146_mem); | |
| if (saa->video_dev.minor != -1) | |
| video_unregister_device(&saa->video_dev); | |
| } | |
| static int __devinit stradis_probe(struct pci_dev *pdev, | |
| const struct pci_device_id *ent) | |
| { | |
| int retval = -EINVAL; | |
| if (saa_num >= SAA7146_MAX) | |
| goto err; | |
| if (!pdev->subsystem_vendor) | |
| dev_info(&pdev->dev, "%d: rev1 decoder\n", saa_num); | |
| else | |
| dev_info(&pdev->dev, "%d: SDM2xx found\n", saa_num); | |
| pci_set_drvdata(pdev, &saa7146s[saa_num]); | |
| retval = configure_saa7146(pdev, saa_num); | |
| if (retval) { | |
| dev_err(&pdev->dev, "%d: error in configuring\n", saa_num); | |
| goto err; | |
| } | |
| if (init_saa7146(pdev) < 0) { | |
| dev_err(&pdev->dev, "%d: error in initialization\n", saa_num); | |
| retval = -EIO; | |
| goto errrel; | |
| } | |
| saa_num++; | |
| return 0; | |
| errrel: | |
| stradis_release_saa(pdev); | |
| err: | |
| return retval; | |
| } | |
| static void __devexit stradis_remove(struct pci_dev *pdev) | |
| { | |
| stradis_release_saa(pdev); | |
| } | |
| static struct pci_device_id stradis_pci_tbl[] = { | |
| { PCI_DEVICE(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146) }, | |
| { 0 } | |
| }; | |
| static struct pci_driver stradis_driver = { | |
| .name = "stradis", | |
| .id_table = stradis_pci_tbl, | |
| .probe = stradis_probe, | |
| .remove = __devexit_p(stradis_remove) | |
| }; | |
| static int __init stradis_init(void) | |
| { | |
| int retval; | |
| saa_num = 0; | |
| retval = pci_register_driver(&stradis_driver); | |
| if (retval) | |
| printk(KERN_ERR "stradis: Unable to register pci driver.\n"); | |
| return retval; | |
| } | |
| static void __exit stradis_exit(void) | |
| { | |
| pci_unregister_driver(&stradis_driver); | |
| printk(KERN_INFO "stradis: module cleanup complete\n"); | |
| } | |
| module_init(stradis_init); | |
| module_exit(stradis_exit); |