| /* | |
| * linux/drivers/mmc/mmc.c | |
| * | |
| * Copyright (C) 2003-2004 Russell King, All Rights Reserved. | |
| * SD support Copyright (C) 2004 Ian Molton, All Rights Reserved. | |
| * SD support Copyright (C) 2005 Pierre Ossman, All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/completion.h> | |
| #include <linux/device.h> | |
| #include <linux/delay.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/err.h> | |
| #include <asm/scatterlist.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/mmc/card.h> | |
| #include <linux/mmc/host.h> | |
| #include <linux/mmc/protocol.h> | |
| #include "mmc.h" | |
| #define CMD_RETRIES 3 | |
| /* | |
| * OCR Bit positions to 10s of Vdd mV. | |
| */ | |
| static const unsigned short mmc_ocr_bit_to_vdd[] = { | |
| 150, 155, 160, 165, 170, 180, 190, 200, | |
| 210, 220, 230, 240, 250, 260, 270, 280, | |
| 290, 300, 310, 320, 330, 340, 350, 360 | |
| }; | |
| static const unsigned int tran_exp[] = { | |
| 10000, 100000, 1000000, 10000000, | |
| 0, 0, 0, 0 | |
| }; | |
| static const unsigned char tran_mant[] = { | |
| 0, 10, 12, 13, 15, 20, 25, 30, | |
| 35, 40, 45, 50, 55, 60, 70, 80, | |
| }; | |
| static const unsigned int tacc_exp[] = { | |
| 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, | |
| }; | |
| static const unsigned int tacc_mant[] = { | |
| 0, 10, 12, 13, 15, 20, 25, 30, | |
| 35, 40, 45, 50, 55, 60, 70, 80, | |
| }; | |
| /** | |
| * mmc_request_done - finish processing an MMC request | |
| * @host: MMC host which completed request | |
| * @mrq: MMC request which request | |
| * | |
| * MMC drivers should call this function when they have completed | |
| * their processing of a request. | |
| */ | |
| void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) | |
| { | |
| struct mmc_command *cmd = mrq->cmd; | |
| int err = cmd->error; | |
| pr_debug("%s: req done (CMD%u): %d/%d/%d: %08x %08x %08x %08x\n", | |
| mmc_hostname(host), cmd->opcode, err, | |
| mrq->data ? mrq->data->error : 0, | |
| mrq->stop ? mrq->stop->error : 0, | |
| cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); | |
| if (err && cmd->retries) { | |
| cmd->retries--; | |
| cmd->error = 0; | |
| host->ops->request(host, mrq); | |
| } else if (mrq->done) { | |
| mrq->done(mrq); | |
| } | |
| } | |
| EXPORT_SYMBOL(mmc_request_done); | |
| /** | |
| * mmc_start_request - start a command on a host | |
| * @host: MMC host to start command on | |
| * @mrq: MMC request to start | |
| * | |
| * Queue a command on the specified host. We expect the | |
| * caller to be holding the host lock with interrupts disabled. | |
| */ | |
| void | |
| mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) | |
| { | |
| pr_debug("%s: starting CMD%u arg %08x flags %08x\n", | |
| mmc_hostname(host), mrq->cmd->opcode, | |
| mrq->cmd->arg, mrq->cmd->flags); | |
| WARN_ON(host->card_busy == NULL); | |
| mrq->cmd->error = 0; | |
| mrq->cmd->mrq = mrq; | |
| if (mrq->data) { | |
| mrq->cmd->data = mrq->data; | |
| mrq->data->error = 0; | |
| mrq->data->mrq = mrq; | |
| if (mrq->stop) { | |
| mrq->data->stop = mrq->stop; | |
| mrq->stop->error = 0; | |
| mrq->stop->mrq = mrq; | |
| } | |
| } | |
| host->ops->request(host, mrq); | |
| } | |
| EXPORT_SYMBOL(mmc_start_request); | |
| static void mmc_wait_done(struct mmc_request *mrq) | |
| { | |
| complete(mrq->done_data); | |
| } | |
| int mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq) | |
| { | |
| DECLARE_COMPLETION_ONSTACK(complete); | |
| mrq->done_data = &complete; | |
| mrq->done = mmc_wait_done; | |
| mmc_start_request(host, mrq); | |
| wait_for_completion(&complete); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(mmc_wait_for_req); | |
| /** | |
| * mmc_wait_for_cmd - start a command and wait for completion | |
| * @host: MMC host to start command | |
| * @cmd: MMC command to start | |
| * @retries: maximum number of retries | |
| * | |
| * Start a new MMC command for a host, and wait for the command | |
| * to complete. Return any error that occurred while the command | |
| * was executing. Do not attempt to parse the response. | |
| */ | |
| int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries) | |
| { | |
| struct mmc_request mrq; | |
| BUG_ON(host->card_busy == NULL); | |
| memset(&mrq, 0, sizeof(struct mmc_request)); | |
| memset(cmd->resp, 0, sizeof(cmd->resp)); | |
| cmd->retries = retries; | |
| mrq.cmd = cmd; | |
| cmd->data = NULL; | |
| mmc_wait_for_req(host, &mrq); | |
| return cmd->error; | |
| } | |
| EXPORT_SYMBOL(mmc_wait_for_cmd); | |
| /** | |
| * mmc_wait_for_app_cmd - start an application command and wait for | |
| completion | |
| * @host: MMC host to start command | |
| * @rca: RCA to send MMC_APP_CMD to | |
| * @cmd: MMC command to start | |
| * @retries: maximum number of retries | |
| * | |
| * Sends a MMC_APP_CMD, checks the card response, sends the command | |
| * in the parameter and waits for it to complete. Return any error | |
| * that occurred while the command was executing. Do not attempt to | |
| * parse the response. | |
| */ | |
| int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca, | |
| struct mmc_command *cmd, int retries) | |
| { | |
| struct mmc_request mrq; | |
| struct mmc_command appcmd; | |
| int i, err; | |
| BUG_ON(host->card_busy == NULL); | |
| BUG_ON(retries < 0); | |
| err = MMC_ERR_INVALID; | |
| /* | |
| * We have to resend MMC_APP_CMD for each attempt so | |
| * we cannot use the retries field in mmc_command. | |
| */ | |
| for (i = 0;i <= retries;i++) { | |
| memset(&mrq, 0, sizeof(struct mmc_request)); | |
| appcmd.opcode = MMC_APP_CMD; | |
| appcmd.arg = rca << 16; | |
| appcmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | |
| appcmd.retries = 0; | |
| memset(appcmd.resp, 0, sizeof(appcmd.resp)); | |
| appcmd.data = NULL; | |
| mrq.cmd = &appcmd; | |
| appcmd.data = NULL; | |
| mmc_wait_for_req(host, &mrq); | |
| if (appcmd.error) { | |
| err = appcmd.error; | |
| continue; | |
| } | |
| /* Check that card supported application commands */ | |
| if (!(appcmd.resp[0] & R1_APP_CMD)) | |
| return MMC_ERR_FAILED; | |
| memset(&mrq, 0, sizeof(struct mmc_request)); | |
| memset(cmd->resp, 0, sizeof(cmd->resp)); | |
| cmd->retries = 0; | |
| mrq.cmd = cmd; | |
| cmd->data = NULL; | |
| mmc_wait_for_req(host, &mrq); | |
| err = cmd->error; | |
| if (cmd->error == MMC_ERR_NONE) | |
| break; | |
| } | |
| return err; | |
| } | |
| EXPORT_SYMBOL(mmc_wait_for_app_cmd); | |
| /** | |
| * mmc_set_data_timeout - set the timeout for a data command | |
| * @data: data phase for command | |
| * @card: the MMC card associated with the data transfer | |
| * @write: flag to differentiate reads from writes | |
| */ | |
| void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card, | |
| int write) | |
| { | |
| unsigned int mult; | |
| /* | |
| * SD cards use a 100 multiplier rather than 10 | |
| */ | |
| mult = mmc_card_sd(card) ? 100 : 10; | |
| /* | |
| * Scale up the multiplier (and therefore the timeout) by | |
| * the r2w factor for writes. | |
| */ | |
| if (write) | |
| mult <<= card->csd.r2w_factor; | |
| data->timeout_ns = card->csd.tacc_ns * mult; | |
| data->timeout_clks = card->csd.tacc_clks * mult; | |
| /* | |
| * SD cards also have an upper limit on the timeout. | |
| */ | |
| if (mmc_card_sd(card)) { | |
| unsigned int timeout_us, limit_us; | |
| timeout_us = data->timeout_ns / 1000; | |
| timeout_us += data->timeout_clks * 1000 / | |
| (card->host->ios.clock / 1000); | |
| if (write) | |
| limit_us = 250000; | |
| else | |
| limit_us = 100000; | |
| if (timeout_us > limit_us) { | |
| data->timeout_ns = limit_us * 1000; | |
| data->timeout_clks = 0; | |
| } | |
| } | |
| } | |
| EXPORT_SYMBOL(mmc_set_data_timeout); | |
| static int mmc_select_card(struct mmc_host *host, struct mmc_card *card); | |
| /** | |
| * __mmc_claim_host - exclusively claim a host | |
| * @host: mmc host to claim | |
| * @card: mmc card to claim host for | |
| * | |
| * Claim a host for a set of operations. If a valid card | |
| * is passed and this wasn't the last card selected, select | |
| * the card before returning. | |
| * | |
| * Note: you should use mmc_card_claim_host or mmc_claim_host. | |
| */ | |
| int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card) | |
| { | |
| DECLARE_WAITQUEUE(wait, current); | |
| unsigned long flags; | |
| int err = 0; | |
| add_wait_queue(&host->wq, &wait); | |
| spin_lock_irqsave(&host->lock, flags); | |
| while (1) { | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| if (host->card_busy == NULL) | |
| break; | |
| spin_unlock_irqrestore(&host->lock, flags); | |
| schedule(); | |
| spin_lock_irqsave(&host->lock, flags); | |
| } | |
| set_current_state(TASK_RUNNING); | |
| host->card_busy = card; | |
| spin_unlock_irqrestore(&host->lock, flags); | |
| remove_wait_queue(&host->wq, &wait); | |
| if (card != (void *)-1) { | |
| err = mmc_select_card(host, card); | |
| if (err != MMC_ERR_NONE) | |
| return err; | |
| } | |
| return err; | |
| } | |
| EXPORT_SYMBOL(__mmc_claim_host); | |
| /** | |
| * mmc_release_host - release a host | |
| * @host: mmc host to release | |
| * | |
| * Release a MMC host, allowing others to claim the host | |
| * for their operations. | |
| */ | |
| void mmc_release_host(struct mmc_host *host) | |
| { | |
| unsigned long flags; | |
| BUG_ON(host->card_busy == NULL); | |
| spin_lock_irqsave(&host->lock, flags); | |
| host->card_busy = NULL; | |
| spin_unlock_irqrestore(&host->lock, flags); | |
| wake_up(&host->wq); | |
| } | |
| EXPORT_SYMBOL(mmc_release_host); | |
| static inline void mmc_set_ios(struct mmc_host *host) | |
| { | |
| struct mmc_ios *ios = &host->ios; | |
| pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n", | |
| mmc_hostname(host), ios->clock, ios->bus_mode, | |
| ios->power_mode, ios->chip_select, ios->vdd, | |
| ios->bus_width); | |
| host->ops->set_ios(host, ios); | |
| } | |
| static int mmc_select_card(struct mmc_host *host, struct mmc_card *card) | |
| { | |
| int err; | |
| struct mmc_command cmd; | |
| BUG_ON(host->card_busy == NULL); | |
| if (host->card_selected == card) | |
| return MMC_ERR_NONE; | |
| host->card_selected = card; | |
| cmd.opcode = MMC_SELECT_CARD; | |
| cmd.arg = card->rca << 16; | |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | |
| if (err != MMC_ERR_NONE) | |
| return err; | |
| /* | |
| * Default bus width is 1 bit. | |
| */ | |
| host->ios.bus_width = MMC_BUS_WIDTH_1; | |
| /* | |
| * We can only change the bus width of the selected | |
| * card so therefore we have to put the handling | |
| * here. | |
| */ | |
| if (host->caps & MMC_CAP_4_BIT_DATA) { | |
| /* | |
| * The card is in 1 bit mode by default so | |
| * we only need to change if it supports the | |
| * wider version. | |
| */ | |
| if (mmc_card_sd(card) && | |
| (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { | |
| struct mmc_command cmd; | |
| cmd.opcode = SD_APP_SET_BUS_WIDTH; | |
| cmd.arg = SD_BUS_WIDTH_4; | |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | |
| err = mmc_wait_for_app_cmd(host, card->rca, &cmd, | |
| CMD_RETRIES); | |
| if (err != MMC_ERR_NONE) | |
| return err; | |
| host->ios.bus_width = MMC_BUS_WIDTH_4; | |
| } | |
| } | |
| mmc_set_ios(host); | |
| return MMC_ERR_NONE; | |
| } | |
| /* | |
| * Ensure that no card is selected. | |
| */ | |
| static void mmc_deselect_cards(struct mmc_host *host) | |
| { | |
| struct mmc_command cmd; | |
| if (host->card_selected) { | |
| host->card_selected = NULL; | |
| cmd.opcode = MMC_SELECT_CARD; | |
| cmd.arg = 0; | |
| cmd.flags = MMC_RSP_NONE | MMC_CMD_AC; | |
| mmc_wait_for_cmd(host, &cmd, 0); | |
| } | |
| } | |
| static inline void mmc_delay(unsigned int ms) | |
| { | |
| if (ms < HZ / 1000) { | |
| yield(); | |
| mdelay(ms); | |
| } else { | |
| msleep_interruptible (ms); | |
| } | |
| } | |
| /* | |
| * Mask off any voltages we don't support and select | |
| * the lowest voltage | |
| */ | |
| static u32 mmc_select_voltage(struct mmc_host *host, u32 ocr) | |
| { | |
| int bit; | |
| ocr &= host->ocr_avail; | |
| bit = ffs(ocr); | |
| if (bit) { | |
| bit -= 1; | |
| ocr &= 3 << bit; | |
| host->ios.vdd = bit; | |
| mmc_set_ios(host); | |
| } else { | |
| ocr = 0; | |
| } | |
| return ocr; | |
| } | |
| #define UNSTUFF_BITS(resp,start,size) \ | |
| ({ \ | |
| const int __size = size; \ | |
| const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1; \ | |
| const int __off = 3 - ((start) / 32); \ | |
| const int __shft = (start) & 31; \ | |
| u32 __res; \ | |
| \ | |
| __res = resp[__off] >> __shft; \ | |
| if (__size + __shft > 32) \ | |
| __res |= resp[__off-1] << ((32 - __shft) % 32); \ | |
| __res & __mask; \ | |
| }) | |
| /* | |
| * Given the decoded CSD structure, decode the raw CID to our CID structure. | |
| */ | |
| static void mmc_decode_cid(struct mmc_card *card) | |
| { | |
| u32 *resp = card->raw_cid; | |
| memset(&card->cid, 0, sizeof(struct mmc_cid)); | |
| if (mmc_card_sd(card)) { | |
| /* | |
| * SD doesn't currently have a version field so we will | |
| * have to assume we can parse this. | |
| */ | |
| card->cid.manfid = UNSTUFF_BITS(resp, 120, 8); | |
| card->cid.oemid = UNSTUFF_BITS(resp, 104, 16); | |
| card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); | |
| card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); | |
| card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); | |
| card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); | |
| card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); | |
| card->cid.hwrev = UNSTUFF_BITS(resp, 60, 4); | |
| card->cid.fwrev = UNSTUFF_BITS(resp, 56, 4); | |
| card->cid.serial = UNSTUFF_BITS(resp, 24, 32); | |
| card->cid.year = UNSTUFF_BITS(resp, 12, 8); | |
| card->cid.month = UNSTUFF_BITS(resp, 8, 4); | |
| card->cid.year += 2000; /* SD cards year offset */ | |
| } else { | |
| /* | |
| * The selection of the format here is based upon published | |
| * specs from sandisk and from what people have reported. | |
| */ | |
| switch (card->csd.mmca_vsn) { | |
| case 0: /* MMC v1.0 - v1.2 */ | |
| case 1: /* MMC v1.4 */ | |
| card->cid.manfid = UNSTUFF_BITS(resp, 104, 24); | |
| card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); | |
| card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); | |
| card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); | |
| card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); | |
| card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); | |
| card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); | |
| card->cid.prod_name[6] = UNSTUFF_BITS(resp, 48, 8); | |
| card->cid.hwrev = UNSTUFF_BITS(resp, 44, 4); | |
| card->cid.fwrev = UNSTUFF_BITS(resp, 40, 4); | |
| card->cid.serial = UNSTUFF_BITS(resp, 16, 24); | |
| card->cid.month = UNSTUFF_BITS(resp, 12, 4); | |
| card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; | |
| break; | |
| case 2: /* MMC v2.0 - v2.2 */ | |
| case 3: /* MMC v3.1 - v3.3 */ | |
| case 4: /* MMC v4 */ | |
| card->cid.manfid = UNSTUFF_BITS(resp, 120, 8); | |
| card->cid.oemid = UNSTUFF_BITS(resp, 104, 16); | |
| card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); | |
| card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); | |
| card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); | |
| card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); | |
| card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); | |
| card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); | |
| card->cid.serial = UNSTUFF_BITS(resp, 16, 32); | |
| card->cid.month = UNSTUFF_BITS(resp, 12, 4); | |
| card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; | |
| break; | |
| default: | |
| printk("%s: card has unknown MMCA version %d\n", | |
| mmc_hostname(card->host), card->csd.mmca_vsn); | |
| mmc_card_set_bad(card); | |
| break; | |
| } | |
| } | |
| } | |
| /* | |
| * Given a 128-bit response, decode to our card CSD structure. | |
| */ | |
| static void mmc_decode_csd(struct mmc_card *card) | |
| { | |
| struct mmc_csd *csd = &card->csd; | |
| unsigned int e, m, csd_struct; | |
| u32 *resp = card->raw_csd; | |
| if (mmc_card_sd(card)) { | |
| csd_struct = UNSTUFF_BITS(resp, 126, 2); | |
| if (csd_struct != 0) { | |
| printk("%s: unrecognised CSD structure version %d\n", | |
| mmc_hostname(card->host), csd_struct); | |
| mmc_card_set_bad(card); | |
| return; | |
| } | |
| m = UNSTUFF_BITS(resp, 115, 4); | |
| e = UNSTUFF_BITS(resp, 112, 3); | |
| csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10; | |
| csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100; | |
| m = UNSTUFF_BITS(resp, 99, 4); | |
| e = UNSTUFF_BITS(resp, 96, 3); | |
| csd->max_dtr = tran_exp[e] * tran_mant[m]; | |
| csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); | |
| e = UNSTUFF_BITS(resp, 47, 3); | |
| m = UNSTUFF_BITS(resp, 62, 12); | |
| csd->capacity = (1 + m) << (e + 2); | |
| csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); | |
| csd->read_partial = UNSTUFF_BITS(resp, 79, 1); | |
| csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); | |
| csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); | |
| csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); | |
| csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); | |
| csd->write_partial = UNSTUFF_BITS(resp, 21, 1); | |
| } else { | |
| /* | |
| * We only understand CSD structure v1.1 and v1.2. | |
| * v1.2 has extra information in bits 15, 11 and 10. | |
| */ | |
| csd_struct = UNSTUFF_BITS(resp, 126, 2); | |
| if (csd_struct != 1 && csd_struct != 2) { | |
| printk("%s: unrecognised CSD structure version %d\n", | |
| mmc_hostname(card->host), csd_struct); | |
| mmc_card_set_bad(card); | |
| return; | |
| } | |
| csd->mmca_vsn = UNSTUFF_BITS(resp, 122, 4); | |
| m = UNSTUFF_BITS(resp, 115, 4); | |
| e = UNSTUFF_BITS(resp, 112, 3); | |
| csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10; | |
| csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100; | |
| m = UNSTUFF_BITS(resp, 99, 4); | |
| e = UNSTUFF_BITS(resp, 96, 3); | |
| csd->max_dtr = tran_exp[e] * tran_mant[m]; | |
| csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); | |
| e = UNSTUFF_BITS(resp, 47, 3); | |
| m = UNSTUFF_BITS(resp, 62, 12); | |
| csd->capacity = (1 + m) << (e + 2); | |
| csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); | |
| csd->read_partial = UNSTUFF_BITS(resp, 79, 1); | |
| csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); | |
| csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); | |
| csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); | |
| csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); | |
| csd->write_partial = UNSTUFF_BITS(resp, 21, 1); | |
| } | |
| } | |
| /* | |
| * Given a 64-bit response, decode to our card SCR structure. | |
| */ | |
| static void mmc_decode_scr(struct mmc_card *card) | |
| { | |
| struct sd_scr *scr = &card->scr; | |
| unsigned int scr_struct; | |
| u32 resp[4]; | |
| BUG_ON(!mmc_card_sd(card)); | |
| resp[3] = card->raw_scr[1]; | |
| resp[2] = card->raw_scr[0]; | |
| scr_struct = UNSTUFF_BITS(resp, 60, 4); | |
| if (scr_struct != 0) { | |
| printk("%s: unrecognised SCR structure version %d\n", | |
| mmc_hostname(card->host), scr_struct); | |
| mmc_card_set_bad(card); | |
| return; | |
| } | |
| scr->sda_vsn = UNSTUFF_BITS(resp, 56, 4); | |
| scr->bus_widths = UNSTUFF_BITS(resp, 48, 4); | |
| } | |
| /* | |
| * Locate a MMC card on this MMC host given a raw CID. | |
| */ | |
| static struct mmc_card *mmc_find_card(struct mmc_host *host, u32 *raw_cid) | |
| { | |
| struct mmc_card *card; | |
| list_for_each_entry(card, &host->cards, node) { | |
| if (memcmp(card->raw_cid, raw_cid, sizeof(card->raw_cid)) == 0) | |
| return card; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * Allocate a new MMC card, and assign a unique RCA. | |
| */ | |
| static struct mmc_card * | |
| mmc_alloc_card(struct mmc_host *host, u32 *raw_cid, unsigned int *frca) | |
| { | |
| struct mmc_card *card, *c; | |
| unsigned int rca = *frca; | |
| card = kmalloc(sizeof(struct mmc_card), GFP_KERNEL); | |
| if (!card) | |
| return ERR_PTR(-ENOMEM); | |
| mmc_init_card(card, host); | |
| memcpy(card->raw_cid, raw_cid, sizeof(card->raw_cid)); | |
| again: | |
| list_for_each_entry(c, &host->cards, node) | |
| if (c->rca == rca) { | |
| rca++; | |
| goto again; | |
| } | |
| card->rca = rca; | |
| *frca = rca; | |
| return card; | |
| } | |
| /* | |
| * Tell attached cards to go to IDLE state | |
| */ | |
| static void mmc_idle_cards(struct mmc_host *host) | |
| { | |
| struct mmc_command cmd; | |
| host->ios.chip_select = MMC_CS_HIGH; | |
| mmc_set_ios(host); | |
| mmc_delay(1); | |
| cmd.opcode = MMC_GO_IDLE_STATE; | |
| cmd.arg = 0; | |
| cmd.flags = MMC_RSP_NONE | MMC_CMD_BC; | |
| mmc_wait_for_cmd(host, &cmd, 0); | |
| mmc_delay(1); | |
| host->ios.chip_select = MMC_CS_DONTCARE; | |
| mmc_set_ios(host); | |
| mmc_delay(1); | |
| } | |
| /* | |
| * Apply power to the MMC stack. This is a two-stage process. | |
| * First, we enable power to the card without the clock running. | |
| * We then wait a bit for the power to stabilise. Finally, | |
| * enable the bus drivers and clock to the card. | |
| * | |
| * We must _NOT_ enable the clock prior to power stablising. | |
| * | |
| * If a host does all the power sequencing itself, ignore the | |
| * initial MMC_POWER_UP stage. | |
| */ | |
| static void mmc_power_up(struct mmc_host *host) | |
| { | |
| int bit = fls(host->ocr_avail) - 1; | |
| host->ios.vdd = bit; | |
| host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; | |
| host->ios.chip_select = MMC_CS_DONTCARE; | |
| host->ios.power_mode = MMC_POWER_UP; | |
| host->ios.bus_width = MMC_BUS_WIDTH_1; | |
| mmc_set_ios(host); | |
| mmc_delay(1); | |
| host->ios.clock = host->f_min; | |
| host->ios.power_mode = MMC_POWER_ON; | |
| mmc_set_ios(host); | |
| mmc_delay(2); | |
| } | |
| static void mmc_power_off(struct mmc_host *host) | |
| { | |
| host->ios.clock = 0; | |
| host->ios.vdd = 0; | |
| host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; | |
| host->ios.chip_select = MMC_CS_DONTCARE; | |
| host->ios.power_mode = MMC_POWER_OFF; | |
| host->ios.bus_width = MMC_BUS_WIDTH_1; | |
| mmc_set_ios(host); | |
| } | |
| static int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) | |
| { | |
| struct mmc_command cmd; | |
| int i, err = 0; | |
| cmd.opcode = MMC_SEND_OP_COND; | |
| cmd.arg = ocr; | |
| cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; | |
| for (i = 100; i; i--) { | |
| err = mmc_wait_for_cmd(host, &cmd, 0); | |
| if (err != MMC_ERR_NONE) | |
| break; | |
| if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0) | |
| break; | |
| err = MMC_ERR_TIMEOUT; | |
| mmc_delay(10); | |
| } | |
| if (rocr) | |
| *rocr = cmd.resp[0]; | |
| return err; | |
| } | |
| static int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) | |
| { | |
| struct mmc_command cmd; | |
| int i, err = 0; | |
| cmd.opcode = SD_APP_OP_COND; | |
| cmd.arg = ocr; | |
| cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; | |
| for (i = 100; i; i--) { | |
| err = mmc_wait_for_app_cmd(host, 0, &cmd, CMD_RETRIES); | |
| if (err != MMC_ERR_NONE) | |
| break; | |
| if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0) | |
| break; | |
| err = MMC_ERR_TIMEOUT; | |
| mmc_delay(10); | |
| } | |
| if (rocr) | |
| *rocr = cmd.resp[0]; | |
| return err; | |
| } | |
| /* | |
| * Discover cards by requesting their CID. If this command | |
| * times out, it is not an error; there are no further cards | |
| * to be discovered. Add new cards to the list. | |
| * | |
| * Create a mmc_card entry for each discovered card, assigning | |
| * it an RCA, and save the raw CID for decoding later. | |
| */ | |
| static void mmc_discover_cards(struct mmc_host *host) | |
| { | |
| struct mmc_card *card; | |
| unsigned int first_rca = 1, err; | |
| while (1) { | |
| struct mmc_command cmd; | |
| cmd.opcode = MMC_ALL_SEND_CID; | |
| cmd.arg = 0; | |
| cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR; | |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | |
| if (err == MMC_ERR_TIMEOUT) { | |
| err = MMC_ERR_NONE; | |
| break; | |
| } | |
| if (err != MMC_ERR_NONE) { | |
| printk(KERN_ERR "%s: error requesting CID: %d\n", | |
| mmc_hostname(host), err); | |
| break; | |
| } | |
| card = mmc_find_card(host, cmd.resp); | |
| if (!card) { | |
| card = mmc_alloc_card(host, cmd.resp, &first_rca); | |
| if (IS_ERR(card)) { | |
| err = PTR_ERR(card); | |
| break; | |
| } | |
| list_add(&card->node, &host->cards); | |
| } | |
| card->state &= ~MMC_STATE_DEAD; | |
| if (host->mode == MMC_MODE_SD) { | |
| mmc_card_set_sd(card); | |
| cmd.opcode = SD_SEND_RELATIVE_ADDR; | |
| cmd.arg = 0; | |
| cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR; | |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | |
| if (err != MMC_ERR_NONE) | |
| mmc_card_set_dead(card); | |
| else { | |
| card->rca = cmd.resp[0] >> 16; | |
| if (!host->ops->get_ro) { | |
| printk(KERN_WARNING "%s: host does not " | |
| "support reading read-only " | |
| "switch. assuming write-enable.\n", | |
| mmc_hostname(host)); | |
| } else { | |
| if (host->ops->get_ro(host)) | |
| mmc_card_set_readonly(card); | |
| } | |
| } | |
| } else { | |
| cmd.opcode = MMC_SET_RELATIVE_ADDR; | |
| cmd.arg = card->rca << 16; | |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | |
| if (err != MMC_ERR_NONE) | |
| mmc_card_set_dead(card); | |
| } | |
| } | |
| } | |
| static void mmc_read_csds(struct mmc_host *host) | |
| { | |
| struct mmc_card *card; | |
| list_for_each_entry(card, &host->cards, node) { | |
| struct mmc_command cmd; | |
| int err; | |
| if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT)) | |
| continue; | |
| cmd.opcode = MMC_SEND_CSD; | |
| cmd.arg = card->rca << 16; | |
| cmd.flags = MMC_RSP_R2 | MMC_CMD_AC; | |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | |
| if (err != MMC_ERR_NONE) { | |
| mmc_card_set_dead(card); | |
| continue; | |
| } | |
| memcpy(card->raw_csd, cmd.resp, sizeof(card->raw_csd)); | |
| mmc_decode_csd(card); | |
| mmc_decode_cid(card); | |
| } | |
| } | |
| static void mmc_read_scrs(struct mmc_host *host) | |
| { | |
| int err; | |
| struct mmc_card *card; | |
| struct mmc_request mrq; | |
| struct mmc_command cmd; | |
| struct mmc_data data; | |
| struct scatterlist sg; | |
| list_for_each_entry(card, &host->cards, node) { | |
| if (card->state & (MMC_STATE_DEAD|MMC_STATE_PRESENT)) | |
| continue; | |
| if (!mmc_card_sd(card)) | |
| continue; | |
| err = mmc_select_card(host, card); | |
| if (err != MMC_ERR_NONE) { | |
| mmc_card_set_dead(card); | |
| continue; | |
| } | |
| memset(&cmd, 0, sizeof(struct mmc_command)); | |
| cmd.opcode = MMC_APP_CMD; | |
| cmd.arg = card->rca << 16; | |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | |
| err = mmc_wait_for_cmd(host, &cmd, 0); | |
| if ((err != MMC_ERR_NONE) || !(cmd.resp[0] & R1_APP_CMD)) { | |
| mmc_card_set_dead(card); | |
| continue; | |
| } | |
| memset(&cmd, 0, sizeof(struct mmc_command)); | |
| cmd.opcode = SD_APP_SEND_SCR; | |
| cmd.arg = 0; | |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; | |
| memset(&data, 0, sizeof(struct mmc_data)); | |
| mmc_set_data_timeout(&data, card, 0); | |
| data.blksz = 1 << 3; | |
| data.blocks = 1; | |
| data.flags = MMC_DATA_READ; | |
| data.sg = &sg; | |
| data.sg_len = 1; | |
| memset(&mrq, 0, sizeof(struct mmc_request)); | |
| mrq.cmd = &cmd; | |
| mrq.data = &data; | |
| sg_init_one(&sg, (u8*)card->raw_scr, 8); | |
| mmc_wait_for_req(host, &mrq); | |
| if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) { | |
| mmc_card_set_dead(card); | |
| continue; | |
| } | |
| card->raw_scr[0] = ntohl(card->raw_scr[0]); | |
| card->raw_scr[1] = ntohl(card->raw_scr[1]); | |
| mmc_decode_scr(card); | |
| } | |
| mmc_deselect_cards(host); | |
| } | |
| static unsigned int mmc_calculate_clock(struct mmc_host *host) | |
| { | |
| struct mmc_card *card; | |
| unsigned int max_dtr = host->f_max; | |
| list_for_each_entry(card, &host->cards, node) | |
| if (!mmc_card_dead(card) && max_dtr > card->csd.max_dtr) | |
| max_dtr = card->csd.max_dtr; | |
| pr_debug("%s: selected %d.%03dMHz transfer rate\n", | |
| mmc_hostname(host), | |
| max_dtr / 1000000, (max_dtr / 1000) % 1000); | |
| return max_dtr; | |
| } | |
| /* | |
| * Check whether cards we already know about are still present. | |
| * We do this by requesting status, and checking whether a card | |
| * responds. | |
| * | |
| * A request for status does not cause a state change in data | |
| * transfer mode. | |
| */ | |
| static void mmc_check_cards(struct mmc_host *host) | |
| { | |
| struct list_head *l, *n; | |
| mmc_deselect_cards(host); | |
| list_for_each_safe(l, n, &host->cards) { | |
| struct mmc_card *card = mmc_list_to_card(l); | |
| struct mmc_command cmd; | |
| int err; | |
| cmd.opcode = MMC_SEND_STATUS; | |
| cmd.arg = card->rca << 16; | |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; | |
| err = mmc_wait_for_cmd(host, &cmd, CMD_RETRIES); | |
| if (err == MMC_ERR_NONE) | |
| continue; | |
| mmc_card_set_dead(card); | |
| } | |
| } | |
| static void mmc_setup(struct mmc_host *host) | |
| { | |
| if (host->ios.power_mode != MMC_POWER_ON) { | |
| int err; | |
| u32 ocr; | |
| host->mode = MMC_MODE_SD; | |
| mmc_power_up(host); | |
| mmc_idle_cards(host); | |
| err = mmc_send_app_op_cond(host, 0, &ocr); | |
| /* | |
| * If we fail to detect any SD cards then try | |
| * searching for MMC cards. | |
| */ | |
| if (err != MMC_ERR_NONE) { | |
| host->mode = MMC_MODE_MMC; | |
| err = mmc_send_op_cond(host, 0, &ocr); | |
| if (err != MMC_ERR_NONE) | |
| return; | |
| } | |
| host->ocr = mmc_select_voltage(host, ocr); | |
| /* | |
| * Since we're changing the OCR value, we seem to | |
| * need to tell some cards to go back to the idle | |
| * state. We wait 1ms to give cards time to | |
| * respond. | |
| */ | |
| if (host->ocr) | |
| mmc_idle_cards(host); | |
| } else { | |
| host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; | |
| host->ios.clock = host->f_min; | |
| mmc_set_ios(host); | |
| /* | |
| * We should remember the OCR mask from the existing | |
| * cards, and detect the new cards OCR mask, combine | |
| * the two and re-select the VDD. However, if we do | |
| * change VDD, we should do an idle, and then do a | |
| * full re-initialisation. We would need to notify | |
| * drivers so that they can re-setup the cards as | |
| * well, while keeping their queues at bay. | |
| * | |
| * For the moment, we take the easy way out - if the | |
| * new cards don't like our currently selected VDD, | |
| * they drop off the bus. | |
| */ | |
| } | |
| if (host->ocr == 0) | |
| return; | |
| /* | |
| * Send the selected OCR multiple times... until the cards | |
| * all get the idea that they should be ready for CMD2. | |
| * (My SanDisk card seems to need this.) | |
| */ | |
| if (host->mode == MMC_MODE_SD) | |
| mmc_send_app_op_cond(host, host->ocr, NULL); | |
| else | |
| mmc_send_op_cond(host, host->ocr, NULL); | |
| mmc_discover_cards(host); | |
| /* | |
| * Ok, now switch to push-pull mode. | |
| */ | |
| host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; | |
| mmc_set_ios(host); | |
| mmc_read_csds(host); | |
| if (host->mode == MMC_MODE_SD) | |
| mmc_read_scrs(host); | |
| } | |
| /** | |
| * mmc_detect_change - process change of state on a MMC socket | |
| * @host: host which changed state. | |
| * @delay: optional delay to wait before detection (jiffies) | |
| * | |
| * All we know is that card(s) have been inserted or removed | |
| * from the socket(s). We don't know which socket or cards. | |
| */ | |
| void mmc_detect_change(struct mmc_host *host, unsigned long delay) | |
| { | |
| if (delay) | |
| mmc_schedule_delayed_work(&host->detect, delay); | |
| else | |
| mmc_schedule_work(&host->detect); | |
| } | |
| EXPORT_SYMBOL(mmc_detect_change); | |
| static void mmc_rescan(void *data) | |
| { | |
| struct mmc_host *host = data; | |
| struct list_head *l, *n; | |
| unsigned char power_mode; | |
| mmc_claim_host(host); | |
| /* | |
| * Check for removed cards and newly inserted ones. We check for | |
| * removed cards first so we can intelligently re-select the VDD. | |
| */ | |
| power_mode = host->ios.power_mode; | |
| if (power_mode == MMC_POWER_ON) | |
| mmc_check_cards(host); | |
| mmc_setup(host); | |
| /* | |
| * Some broken cards process CMD1 even in stand-by state. There is | |
| * no reply, but an ILLEGAL_COMMAND error is cached and returned | |
| * after next command. We poll for card status here to clear any | |
| * possibly pending error. | |
| */ | |
| if (power_mode == MMC_POWER_ON) | |
| mmc_check_cards(host); | |
| if (!list_empty(&host->cards)) { | |
| /* | |
| * (Re-)calculate the fastest clock rate which the | |
| * attached cards and the host support. | |
| */ | |
| host->ios.clock = mmc_calculate_clock(host); | |
| mmc_set_ios(host); | |
| } | |
| mmc_release_host(host); | |
| list_for_each_safe(l, n, &host->cards) { | |
| struct mmc_card *card = mmc_list_to_card(l); | |
| /* | |
| * If this is a new and good card, register it. | |
| */ | |
| if (!mmc_card_present(card) && !mmc_card_dead(card)) { | |
| if (mmc_register_card(card)) | |
| mmc_card_set_dead(card); | |
| else | |
| mmc_card_set_present(card); | |
| } | |
| /* | |
| * If this card is dead, destroy it. | |
| */ | |
| if (mmc_card_dead(card)) { | |
| list_del(&card->node); | |
| mmc_remove_card(card); | |
| } | |
| } | |
| /* | |
| * If we discover that there are no cards on the | |
| * bus, turn off the clock and power down. | |
| */ | |
| if (list_empty(&host->cards)) | |
| mmc_power_off(host); | |
| } | |
| /** | |
| * mmc_alloc_host - initialise the per-host structure. | |
| * @extra: sizeof private data structure | |
| * @dev: pointer to host device model structure | |
| * | |
| * Initialise the per-host structure. | |
| */ | |
| struct mmc_host *mmc_alloc_host(int extra, struct device *dev) | |
| { | |
| struct mmc_host *host; | |
| host = mmc_alloc_host_sysfs(extra, dev); | |
| if (host) { | |
| spin_lock_init(&host->lock); | |
| init_waitqueue_head(&host->wq); | |
| INIT_LIST_HEAD(&host->cards); | |
| INIT_WORK(&host->detect, mmc_rescan, host); | |
| /* | |
| * By default, hosts do not support SGIO or large requests. | |
| * They have to set these according to their abilities. | |
| */ | |
| host->max_hw_segs = 1; | |
| host->max_phys_segs = 1; | |
| host->max_sectors = 1 << (PAGE_CACHE_SHIFT - 9); | |
| host->max_seg_size = PAGE_CACHE_SIZE; | |
| } | |
| return host; | |
| } | |
| EXPORT_SYMBOL(mmc_alloc_host); | |
| /** | |
| * mmc_add_host - initialise host hardware | |
| * @host: mmc host | |
| */ | |
| int mmc_add_host(struct mmc_host *host) | |
| { | |
| int ret; | |
| ret = mmc_add_host_sysfs(host); | |
| if (ret == 0) { | |
| mmc_power_off(host); | |
| mmc_detect_change(host, 0); | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(mmc_add_host); | |
| /** | |
| * mmc_remove_host - remove host hardware | |
| * @host: mmc host | |
| * | |
| * Unregister and remove all cards associated with this host, | |
| * and power down the MMC bus. | |
| */ | |
| void mmc_remove_host(struct mmc_host *host) | |
| { | |
| struct list_head *l, *n; | |
| list_for_each_safe(l, n, &host->cards) { | |
| struct mmc_card *card = mmc_list_to_card(l); | |
| mmc_remove_card(card); | |
| } | |
| mmc_power_off(host); | |
| mmc_remove_host_sysfs(host); | |
| } | |
| EXPORT_SYMBOL(mmc_remove_host); | |
| /** | |
| * mmc_free_host - free the host structure | |
| * @host: mmc host | |
| * | |
| * Free the host once all references to it have been dropped. | |
| */ | |
| void mmc_free_host(struct mmc_host *host) | |
| { | |
| mmc_flush_scheduled_work(); | |
| mmc_free_host_sysfs(host); | |
| } | |
| EXPORT_SYMBOL(mmc_free_host); | |
| #ifdef CONFIG_PM | |
| /** | |
| * mmc_suspend_host - suspend a host | |
| * @host: mmc host | |
| * @state: suspend mode (PM_SUSPEND_xxx) | |
| */ | |
| int mmc_suspend_host(struct mmc_host *host, pm_message_t state) | |
| { | |
| mmc_claim_host(host); | |
| mmc_deselect_cards(host); | |
| mmc_power_off(host); | |
| mmc_release_host(host); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(mmc_suspend_host); | |
| /** | |
| * mmc_resume_host - resume a previously suspended host | |
| * @host: mmc host | |
| */ | |
| int mmc_resume_host(struct mmc_host *host) | |
| { | |
| mmc_rescan(host); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(mmc_resume_host); | |
| #endif | |
| MODULE_LICENSE("GPL"); |