| /* | |
| * linux/drivers/mmc/mmci.c - ARM PrimeCell MMCI PL180/1 driver | |
| * | |
| * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/device.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/delay.h> | |
| #include <linux/err.h> | |
| #include <linux/highmem.h> | |
| #include <linux/mmc/host.h> | |
| #include <linux/mmc/protocol.h> | |
| #include <linux/amba/bus.h> | |
| #include <linux/clk.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/div64.h> | |
| #include <asm/io.h> | |
| #include <asm/scatterlist.h> | |
| #include <asm/sizes.h> | |
| #include <asm/mach/mmc.h> | |
| #include "mmci.h" | |
| #define DRIVER_NAME "mmci-pl18x" | |
| #define DBG(host,fmt,args...) \ | |
| pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args) | |
| static unsigned int fmax = 515633; | |
| static void | |
| mmci_request_end(struct mmci_host *host, struct mmc_request *mrq) | |
| { | |
| writel(0, host->base + MMCICOMMAND); | |
| host->mrq = NULL; | |
| host->cmd = NULL; | |
| if (mrq->data) | |
| mrq->data->bytes_xfered = host->data_xfered; | |
| /* | |
| * Need to drop the host lock here; mmc_request_done may call | |
| * back into the driver... | |
| */ | |
| spin_unlock(&host->lock); | |
| mmc_request_done(host->mmc, mrq); | |
| spin_lock(&host->lock); | |
| } | |
| static void mmci_stop_data(struct mmci_host *host) | |
| { | |
| writel(0, host->base + MMCIDATACTRL); | |
| writel(0, host->base + MMCIMASK1); | |
| host->data = NULL; | |
| } | |
| static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) | |
| { | |
| unsigned int datactrl, timeout, irqmask; | |
| unsigned long long clks; | |
| void __iomem *base; | |
| int blksz_bits; | |
| DBG(host, "blksz %04x blks %04x flags %08x\n", | |
| data->blksz, data->blocks, data->flags); | |
| host->data = data; | |
| host->size = data->blksz; | |
| host->data_xfered = 0; | |
| mmci_init_sg(host, data); | |
| clks = (unsigned long long)data->timeout_ns * host->cclk; | |
| do_div(clks, 1000000000UL); | |
| timeout = data->timeout_clks + (unsigned int)clks; | |
| base = host->base; | |
| writel(timeout, base + MMCIDATATIMER); | |
| writel(host->size, base + MMCIDATALENGTH); | |
| blksz_bits = ffs(data->blksz) - 1; | |
| BUG_ON(1 << blksz_bits != data->blksz); | |
| datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; | |
| if (data->flags & MMC_DATA_READ) { | |
| datactrl |= MCI_DPSM_DIRECTION; | |
| irqmask = MCI_RXFIFOHALFFULLMASK; | |
| /* | |
| * If we have less than a FIFOSIZE of bytes to transfer, | |
| * trigger a PIO interrupt as soon as any data is available. | |
| */ | |
| if (host->size < MCI_FIFOSIZE) | |
| irqmask |= MCI_RXDATAAVLBLMASK; | |
| } else { | |
| /* | |
| * We don't actually need to include "FIFO empty" here | |
| * since its implicit in "FIFO half empty". | |
| */ | |
| irqmask = MCI_TXFIFOHALFEMPTYMASK; | |
| } | |
| writel(datactrl, base + MMCIDATACTRL); | |
| writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0); | |
| writel(irqmask, base + MMCIMASK1); | |
| } | |
| static void | |
| mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) | |
| { | |
| void __iomem *base = host->base; | |
| DBG(host, "op %02x arg %08x flags %08x\n", | |
| cmd->opcode, cmd->arg, cmd->flags); | |
| if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) { | |
| writel(0, base + MMCICOMMAND); | |
| udelay(1); | |
| } | |
| c |= cmd->opcode | MCI_CPSM_ENABLE; | |
| if (cmd->flags & MMC_RSP_PRESENT) { | |
| if (cmd->flags & MMC_RSP_136) | |
| c |= MCI_CPSM_LONGRSP; | |
| c |= MCI_CPSM_RESPONSE; | |
| } | |
| if (/*interrupt*/0) | |
| c |= MCI_CPSM_INTERRUPT; | |
| host->cmd = cmd; | |
| writel(cmd->arg, base + MMCIARGUMENT); | |
| writel(c, base + MMCICOMMAND); | |
| } | |
| static void | |
| mmci_data_irq(struct mmci_host *host, struct mmc_data *data, | |
| unsigned int status) | |
| { | |
| if (status & MCI_DATABLOCKEND) { | |
| host->data_xfered += data->blksz; | |
| } | |
| if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { | |
| if (status & MCI_DATACRCFAIL) | |
| data->error = MMC_ERR_BADCRC; | |
| else if (status & MCI_DATATIMEOUT) | |
| data->error = MMC_ERR_TIMEOUT; | |
| else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) | |
| data->error = MMC_ERR_FIFO; | |
| status |= MCI_DATAEND; | |
| /* | |
| * We hit an error condition. Ensure that any data | |
| * partially written to a page is properly coherent. | |
| */ | |
| if (host->sg_len && data->flags & MMC_DATA_READ) | |
| flush_dcache_page(host->sg_ptr->page); | |
| } | |
| if (status & MCI_DATAEND) { | |
| mmci_stop_data(host); | |
| if (!data->stop) { | |
| mmci_request_end(host, data->mrq); | |
| } else { | |
| mmci_start_command(host, data->stop, 0); | |
| } | |
| } | |
| } | |
| static void | |
| mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, | |
| unsigned int status) | |
| { | |
| void __iomem *base = host->base; | |
| host->cmd = NULL; | |
| cmd->resp[0] = readl(base + MMCIRESPONSE0); | |
| cmd->resp[1] = readl(base + MMCIRESPONSE1); | |
| cmd->resp[2] = readl(base + MMCIRESPONSE2); | |
| cmd->resp[3] = readl(base + MMCIRESPONSE3); | |
| if (status & MCI_CMDTIMEOUT) { | |
| cmd->error = MMC_ERR_TIMEOUT; | |
| } else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) { | |
| cmd->error = MMC_ERR_BADCRC; | |
| } | |
| if (!cmd->data || cmd->error != MMC_ERR_NONE) { | |
| mmci_request_end(host, cmd->mrq); | |
| } else if (!(cmd->data->flags & MMC_DATA_READ)) { | |
| mmci_start_data(host, cmd->data); | |
| } | |
| } | |
| static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain) | |
| { | |
| void __iomem *base = host->base; | |
| char *ptr = buffer; | |
| u32 status; | |
| do { | |
| int count = host->size - (readl(base + MMCIFIFOCNT) << 2); | |
| if (count > remain) | |
| count = remain; | |
| if (count <= 0) | |
| break; | |
| readsl(base + MMCIFIFO, ptr, count >> 2); | |
| ptr += count; | |
| remain -= count; | |
| if (remain == 0) | |
| break; | |
| status = readl(base + MMCISTATUS); | |
| } while (status & MCI_RXDATAAVLBL); | |
| return ptr - buffer; | |
| } | |
| static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status) | |
| { | |
| void __iomem *base = host->base; | |
| char *ptr = buffer; | |
| do { | |
| unsigned int count, maxcnt; | |
| maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : MCI_FIFOHALFSIZE; | |
| count = min(remain, maxcnt); | |
| writesl(base + MMCIFIFO, ptr, count >> 2); | |
| ptr += count; | |
| remain -= count; | |
| if (remain == 0) | |
| break; | |
| status = readl(base + MMCISTATUS); | |
| } while (status & MCI_TXFIFOHALFEMPTY); | |
| return ptr - buffer; | |
| } | |
| /* | |
| * PIO data transfer IRQ handler. | |
| */ | |
| static irqreturn_t mmci_pio_irq(int irq, void *dev_id) | |
| { | |
| struct mmci_host *host = dev_id; | |
| void __iomem *base = host->base; | |
| u32 status; | |
| status = readl(base + MMCISTATUS); | |
| DBG(host, "irq1 %08x\n", status); | |
| do { | |
| unsigned long flags; | |
| unsigned int remain, len; | |
| char *buffer; | |
| /* | |
| * For write, we only need to test the half-empty flag | |
| * here - if the FIFO is completely empty, then by | |
| * definition it is more than half empty. | |
| * | |
| * For read, check for data available. | |
| */ | |
| if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL))) | |
| break; | |
| /* | |
| * Map the current scatter buffer. | |
| */ | |
| buffer = mmci_kmap_atomic(host, &flags) + host->sg_off; | |
| remain = host->sg_ptr->length - host->sg_off; | |
| len = 0; | |
| if (status & MCI_RXACTIVE) | |
| len = mmci_pio_read(host, buffer, remain); | |
| if (status & MCI_TXACTIVE) | |
| len = mmci_pio_write(host, buffer, remain, status); | |
| /* | |
| * Unmap the buffer. | |
| */ | |
| mmci_kunmap_atomic(host, buffer, &flags); | |
| host->sg_off += len; | |
| host->size -= len; | |
| remain -= len; | |
| if (remain) | |
| break; | |
| /* | |
| * If we were reading, and we have completed this | |
| * page, ensure that the data cache is coherent. | |
| */ | |
| if (status & MCI_RXACTIVE) | |
| flush_dcache_page(host->sg_ptr->page); | |
| if (!mmci_next_sg(host)) | |
| break; | |
| status = readl(base + MMCISTATUS); | |
| } while (1); | |
| /* | |
| * If we're nearing the end of the read, switch to | |
| * "any data available" mode. | |
| */ | |
| if (status & MCI_RXACTIVE && host->size < MCI_FIFOSIZE) | |
| writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1); | |
| /* | |
| * If we run out of data, disable the data IRQs; this | |
| * prevents a race where the FIFO becomes empty before | |
| * the chip itself has disabled the data path, and | |
| * stops us racing with our data end IRQ. | |
| */ | |
| if (host->size == 0) { | |
| writel(0, base + MMCIMASK1); | |
| writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * Handle completion of command and data transfers. | |
| */ | |
| static irqreturn_t mmci_irq(int irq, void *dev_id) | |
| { | |
| struct mmci_host *host = dev_id; | |
| u32 status; | |
| int ret = 0; | |
| spin_lock(&host->lock); | |
| do { | |
| struct mmc_command *cmd; | |
| struct mmc_data *data; | |
| status = readl(host->base + MMCISTATUS); | |
| status &= readl(host->base + MMCIMASK0); | |
| writel(status, host->base + MMCICLEAR); | |
| DBG(host, "irq0 %08x\n", status); | |
| data = host->data; | |
| if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN| | |
| MCI_RXOVERRUN|MCI_DATAEND|MCI_DATABLOCKEND) && data) | |
| mmci_data_irq(host, data, status); | |
| cmd = host->cmd; | |
| if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND) && cmd) | |
| mmci_cmd_irq(host, cmd, status); | |
| ret = 1; | |
| } while (status); | |
| spin_unlock(&host->lock); | |
| return IRQ_RETVAL(ret); | |
| } | |
| static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) | |
| { | |
| struct mmci_host *host = mmc_priv(mmc); | |
| WARN_ON(host->mrq != NULL); | |
| spin_lock_irq(&host->lock); | |
| host->mrq = mrq; | |
| if (mrq->data && mrq->data->flags & MMC_DATA_READ) | |
| mmci_start_data(host, mrq->data); | |
| mmci_start_command(host, mrq->cmd, 0); | |
| spin_unlock_irq(&host->lock); | |
| } | |
| static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | |
| { | |
| struct mmci_host *host = mmc_priv(mmc); | |
| u32 clk = 0, pwr = 0; | |
| if (ios->clock) { | |
| if (ios->clock >= host->mclk) { | |
| clk = MCI_CLK_BYPASS; | |
| host->cclk = host->mclk; | |
| } else { | |
| clk = host->mclk / (2 * ios->clock) - 1; | |
| if (clk > 256) | |
| clk = 255; | |
| host->cclk = host->mclk / (2 * (clk + 1)); | |
| } | |
| clk |= MCI_CLK_ENABLE; | |
| } | |
| if (host->plat->translate_vdd) | |
| pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd); | |
| switch (ios->power_mode) { | |
| case MMC_POWER_OFF: | |
| break; | |
| case MMC_POWER_UP: | |
| pwr |= MCI_PWR_UP; | |
| break; | |
| case MMC_POWER_ON: | |
| pwr |= MCI_PWR_ON; | |
| break; | |
| } | |
| if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) | |
| pwr |= MCI_ROD; | |
| writel(clk, host->base + MMCICLOCK); | |
| if (host->pwr != pwr) { | |
| host->pwr = pwr; | |
| writel(pwr, host->base + MMCIPOWER); | |
| } | |
| } | |
| static struct mmc_host_ops mmci_ops = { | |
| .request = mmci_request, | |
| .set_ios = mmci_set_ios, | |
| }; | |
| static void mmci_check_status(unsigned long data) | |
| { | |
| struct mmci_host *host = (struct mmci_host *)data; | |
| unsigned int status; | |
| status = host->plat->status(mmc_dev(host->mmc)); | |
| if (status ^ host->oldstat) | |
| mmc_detect_change(host->mmc, 0); | |
| host->oldstat = status; | |
| mod_timer(&host->timer, jiffies + HZ); | |
| } | |
| static int mmci_probe(struct amba_device *dev, void *id) | |
| { | |
| struct mmc_platform_data *plat = dev->dev.platform_data; | |
| struct mmci_host *host; | |
| struct mmc_host *mmc; | |
| int ret; | |
| /* must have platform data */ | |
| if (!plat) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| ret = amba_request_regions(dev, DRIVER_NAME); | |
| if (ret) | |
| goto out; | |
| mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev); | |
| if (!mmc) { | |
| ret = -ENOMEM; | |
| goto rel_regions; | |
| } | |
| host = mmc_priv(mmc); | |
| host->clk = clk_get(&dev->dev, "MCLK"); | |
| if (IS_ERR(host->clk)) { | |
| ret = PTR_ERR(host->clk); | |
| host->clk = NULL; | |
| goto host_free; | |
| } | |
| ret = clk_enable(host->clk); | |
| if (ret) | |
| goto clk_free; | |
| host->plat = plat; | |
| host->mclk = clk_get_rate(host->clk); | |
| host->mmc = mmc; | |
| host->base = ioremap(dev->res.start, SZ_4K); | |
| if (!host->base) { | |
| ret = -ENOMEM; | |
| goto clk_disable; | |
| } | |
| mmc->ops = &mmci_ops; | |
| mmc->f_min = (host->mclk + 511) / 512; | |
| mmc->f_max = min(host->mclk, fmax); | |
| mmc->ocr_avail = plat->ocr_mask; | |
| mmc->caps = MMC_CAP_MULTIWRITE; | |
| /* | |
| * We can do SGIO | |
| */ | |
| mmc->max_hw_segs = 16; | |
| mmc->max_phys_segs = NR_SG; | |
| /* | |
| * Since we only have a 16-bit data length register, we must | |
| * ensure that we don't exceed 2^16-1 bytes in a single request. | |
| * Choose 64 (512-byte) sectors as the limit. | |
| */ | |
| mmc->max_sectors = 64; | |
| /* | |
| * Set the maximum segment size. Since we aren't doing DMA | |
| * (yet) we are only limited by the data length register. | |
| */ | |
| mmc->max_seg_size = mmc->max_sectors << 9; | |
| spin_lock_init(&host->lock); | |
| writel(0, host->base + MMCIMASK0); | |
| writel(0, host->base + MMCIMASK1); | |
| writel(0xfff, host->base + MMCICLEAR); | |
| ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host); | |
| if (ret) | |
| goto unmap; | |
| ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, DRIVER_NAME " (pio)", host); | |
| if (ret) | |
| goto irq0_free; | |
| writel(MCI_IRQENABLE, host->base + MMCIMASK0); | |
| amba_set_drvdata(dev, mmc); | |
| mmc_add_host(mmc); | |
| printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n", | |
| mmc_hostname(mmc), amba_rev(dev), amba_config(dev), | |
| (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]); | |
| init_timer(&host->timer); | |
| host->timer.data = (unsigned long)host; | |
| host->timer.function = mmci_check_status; | |
| host->timer.expires = jiffies + HZ; | |
| add_timer(&host->timer); | |
| return 0; | |
| irq0_free: | |
| free_irq(dev->irq[0], host); | |
| unmap: | |
| iounmap(host->base); | |
| clk_disable: | |
| clk_disable(host->clk); | |
| clk_free: | |
| clk_put(host->clk); | |
| host_free: | |
| mmc_free_host(mmc); | |
| rel_regions: | |
| amba_release_regions(dev); | |
| out: | |
| return ret; | |
| } | |
| static int mmci_remove(struct amba_device *dev) | |
| { | |
| struct mmc_host *mmc = amba_get_drvdata(dev); | |
| amba_set_drvdata(dev, NULL); | |
| if (mmc) { | |
| struct mmci_host *host = mmc_priv(mmc); | |
| del_timer_sync(&host->timer); | |
| mmc_remove_host(mmc); | |
| writel(0, host->base + MMCIMASK0); | |
| writel(0, host->base + MMCIMASK1); | |
| writel(0, host->base + MMCICOMMAND); | |
| writel(0, host->base + MMCIDATACTRL); | |
| free_irq(dev->irq[0], host); | |
| free_irq(dev->irq[1], host); | |
| iounmap(host->base); | |
| clk_disable(host->clk); | |
| clk_put(host->clk); | |
| mmc_free_host(mmc); | |
| amba_release_regions(dev); | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int mmci_suspend(struct amba_device *dev, pm_message_t state) | |
| { | |
| struct mmc_host *mmc = amba_get_drvdata(dev); | |
| int ret = 0; | |
| if (mmc) { | |
| struct mmci_host *host = mmc_priv(mmc); | |
| ret = mmc_suspend_host(mmc, state); | |
| if (ret == 0) | |
| writel(0, host->base + MMCIMASK0); | |
| } | |
| return ret; | |
| } | |
| static int mmci_resume(struct amba_device *dev) | |
| { | |
| struct mmc_host *mmc = amba_get_drvdata(dev); | |
| int ret = 0; | |
| if (mmc) { | |
| struct mmci_host *host = mmc_priv(mmc); | |
| writel(MCI_IRQENABLE, host->base + MMCIMASK0); | |
| ret = mmc_resume_host(mmc); | |
| } | |
| return ret; | |
| } | |
| #else | |
| #define mmci_suspend NULL | |
| #define mmci_resume NULL | |
| #endif | |
| static struct amba_id mmci_ids[] = { | |
| { | |
| .id = 0x00041180, | |
| .mask = 0x000fffff, | |
| }, | |
| { | |
| .id = 0x00041181, | |
| .mask = 0x000fffff, | |
| }, | |
| { 0, 0 }, | |
| }; | |
| static struct amba_driver mmci_driver = { | |
| .drv = { | |
| .name = DRIVER_NAME, | |
| }, | |
| .probe = mmci_probe, | |
| .remove = mmci_remove, | |
| .suspend = mmci_suspend, | |
| .resume = mmci_resume, | |
| .id_table = mmci_ids, | |
| }; | |
| static int __init mmci_init(void) | |
| { | |
| return amba_driver_register(&mmci_driver); | |
| } | |
| static void __exit mmci_exit(void) | |
| { | |
| amba_driver_unregister(&mmci_driver); | |
| } | |
| module_init(mmci_init); | |
| module_exit(mmci_exit); | |
| module_param(fmax, uint, 0444); | |
| MODULE_DESCRIPTION("ARM PrimeCell PL180/181 Multimedia Card Interface driver"); | |
| MODULE_LICENSE("GPL"); |