| /* | |
| * NAND flash simulator. | |
| * | |
| * Author: Artem B. Bityuckiy <dedekind@oktetlabs.ru>, <dedekind@infradead.org> | |
| * | |
| * Copyright (C) 2004 Nokia Corporation | |
| * | |
| * Note: NS means "NAND Simulator". | |
| * Note: Input means input TO flash chip, output means output FROM chip. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2, or (at your option) any later | |
| * version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General | |
| * Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA | |
| * | |
| * $Id: nandsim.c,v 1.8 2005/03/19 15:33:56 dedekind Exp $ | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/types.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/slab.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <linux/mtd/nand.h> | |
| #include <linux/mtd/partitions.h> | |
| #include <linux/delay.h> | |
| #ifdef CONFIG_NS_ABS_POS | |
| #include <asm/io.h> | |
| #endif | |
| /* Default simulator parameters values */ | |
| #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE) || \ | |
| !defined(CONFIG_NANDSIM_SECOND_ID_BYTE) || \ | |
| !defined(CONFIG_NANDSIM_THIRD_ID_BYTE) || \ | |
| !defined(CONFIG_NANDSIM_FOURTH_ID_BYTE) | |
| #define CONFIG_NANDSIM_FIRST_ID_BYTE 0x98 | |
| #define CONFIG_NANDSIM_SECOND_ID_BYTE 0x39 | |
| #define CONFIG_NANDSIM_THIRD_ID_BYTE 0xFF /* No byte */ | |
| #define CONFIG_NANDSIM_FOURTH_ID_BYTE 0xFF /* No byte */ | |
| #endif | |
| #ifndef CONFIG_NANDSIM_ACCESS_DELAY | |
| #define CONFIG_NANDSIM_ACCESS_DELAY 25 | |
| #endif | |
| #ifndef CONFIG_NANDSIM_PROGRAMM_DELAY | |
| #define CONFIG_NANDSIM_PROGRAMM_DELAY 200 | |
| #endif | |
| #ifndef CONFIG_NANDSIM_ERASE_DELAY | |
| #define CONFIG_NANDSIM_ERASE_DELAY 2 | |
| #endif | |
| #ifndef CONFIG_NANDSIM_OUTPUT_CYCLE | |
| #define CONFIG_NANDSIM_OUTPUT_CYCLE 40 | |
| #endif | |
| #ifndef CONFIG_NANDSIM_INPUT_CYCLE | |
| #define CONFIG_NANDSIM_INPUT_CYCLE 50 | |
| #endif | |
| #ifndef CONFIG_NANDSIM_BUS_WIDTH | |
| #define CONFIG_NANDSIM_BUS_WIDTH 8 | |
| #endif | |
| #ifndef CONFIG_NANDSIM_DO_DELAYS | |
| #define CONFIG_NANDSIM_DO_DELAYS 0 | |
| #endif | |
| #ifndef CONFIG_NANDSIM_LOG | |
| #define CONFIG_NANDSIM_LOG 0 | |
| #endif | |
| #ifndef CONFIG_NANDSIM_DBG | |
| #define CONFIG_NANDSIM_DBG 0 | |
| #endif | |
| static uint first_id_byte = CONFIG_NANDSIM_FIRST_ID_BYTE; | |
| static uint second_id_byte = CONFIG_NANDSIM_SECOND_ID_BYTE; | |
| static uint third_id_byte = CONFIG_NANDSIM_THIRD_ID_BYTE; | |
| static uint fourth_id_byte = CONFIG_NANDSIM_FOURTH_ID_BYTE; | |
| static uint access_delay = CONFIG_NANDSIM_ACCESS_DELAY; | |
| static uint programm_delay = CONFIG_NANDSIM_PROGRAMM_DELAY; | |
| static uint erase_delay = CONFIG_NANDSIM_ERASE_DELAY; | |
| static uint output_cycle = CONFIG_NANDSIM_OUTPUT_CYCLE; | |
| static uint input_cycle = CONFIG_NANDSIM_INPUT_CYCLE; | |
| static uint bus_width = CONFIG_NANDSIM_BUS_WIDTH; | |
| static uint do_delays = CONFIG_NANDSIM_DO_DELAYS; | |
| static uint log = CONFIG_NANDSIM_LOG; | |
| static uint dbg = CONFIG_NANDSIM_DBG; | |
| module_param(first_id_byte, uint, 0400); | |
| module_param(second_id_byte, uint, 0400); | |
| module_param(third_id_byte, uint, 0400); | |
| module_param(fourth_id_byte, uint, 0400); | |
| module_param(access_delay, uint, 0400); | |
| module_param(programm_delay, uint, 0400); | |
| module_param(erase_delay, uint, 0400); | |
| module_param(output_cycle, uint, 0400); | |
| module_param(input_cycle, uint, 0400); | |
| module_param(bus_width, uint, 0400); | |
| module_param(do_delays, uint, 0400); | |
| module_param(log, uint, 0400); | |
| module_param(dbg, uint, 0400); | |
| MODULE_PARM_DESC(first_id_byte, "The fist byte returned by NAND Flash 'read ID' command (manufaturer ID)"); | |
| MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID)"); | |
| MODULE_PARM_DESC(third_id_byte, "The third byte returned by NAND Flash 'read ID' command"); | |
| MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command"); | |
| MODULE_PARM_DESC(access_delay, "Initial page access delay (microiseconds)"); | |
| MODULE_PARM_DESC(programm_delay, "Page programm delay (microseconds"); | |
| MODULE_PARM_DESC(erase_delay, "Sector erase delay (milliseconds)"); | |
| MODULE_PARM_DESC(output_cycle, "Word output (from flash) time (nanodeconds)"); | |
| MODULE_PARM_DESC(input_cycle, "Word input (to flash) time (nanodeconds)"); | |
| MODULE_PARM_DESC(bus_width, "Chip's bus width (8- or 16-bit)"); | |
| MODULE_PARM_DESC(do_delays, "Simulate NAND delays using busy-waits if not zero"); | |
| MODULE_PARM_DESC(log, "Perform logging if not zero"); | |
| MODULE_PARM_DESC(dbg, "Output debug information if not zero"); | |
| /* The largest possible page size */ | |
| #define NS_LARGEST_PAGE_SIZE 2048 | |
| /* The prefix for simulator output */ | |
| #define NS_OUTPUT_PREFIX "[nandsim]" | |
| /* Simulator's output macros (logging, debugging, warning, error) */ | |
| #define NS_LOG(args...) \ | |
| do { if (log) printk(KERN_DEBUG NS_OUTPUT_PREFIX " log: " args); } while(0) | |
| #define NS_DBG(args...) \ | |
| do { if (dbg) printk(KERN_DEBUG NS_OUTPUT_PREFIX " debug: " args); } while(0) | |
| #define NS_WARN(args...) \ | |
| do { printk(KERN_WARNING NS_OUTPUT_PREFIX " warnig: " args); } while(0) | |
| #define NS_ERR(args...) \ | |
| do { printk(KERN_ERR NS_OUTPUT_PREFIX " errorr: " args); } while(0) | |
| /* Busy-wait delay macros (microseconds, milliseconds) */ | |
| #define NS_UDELAY(us) \ | |
| do { if (do_delays) udelay(us); } while(0) | |
| #define NS_MDELAY(us) \ | |
| do { if (do_delays) mdelay(us); } while(0) | |
| /* Is the nandsim structure initialized ? */ | |
| #define NS_IS_INITIALIZED(ns) ((ns)->geom.totsz != 0) | |
| /* Good operation completion status */ | |
| #define NS_STATUS_OK(ns) (NAND_STATUS_READY | (NAND_STATUS_WP * ((ns)->lines.wp == 0))) | |
| /* Operation failed completion status */ | |
| #define NS_STATUS_FAILED(ns) (NAND_STATUS_FAIL | NS_STATUS_OK(ns)) | |
| /* Calculate the page offset in flash RAM image by (row, column) address */ | |
| #define NS_RAW_OFFSET(ns) \ | |
| (((ns)->regs.row << (ns)->geom.pgshift) + ((ns)->regs.row * (ns)->geom.oobsz) + (ns)->regs.column) | |
| /* Calculate the OOB offset in flash RAM image by (row, column) address */ | |
| #define NS_RAW_OFFSET_OOB(ns) (NS_RAW_OFFSET(ns) + ns->geom.pgsz) | |
| /* After a command is input, the simulator goes to one of the following states */ | |
| #define STATE_CMD_READ0 0x00000001 /* read data from the beginning of page */ | |
| #define STATE_CMD_READ1 0x00000002 /* read data from the second half of page */ | |
| #define STATE_CMD_READSTART 0x00000003 /* read data second command (large page devices) */ | |
| #define STATE_CMD_PAGEPROG 0x00000004 /* start page programm */ | |
| #define STATE_CMD_READOOB 0x00000005 /* read OOB area */ | |
| #define STATE_CMD_ERASE1 0x00000006 /* sector erase first command */ | |
| #define STATE_CMD_STATUS 0x00000007 /* read status */ | |
| #define STATE_CMD_STATUS_M 0x00000008 /* read multi-plane status (isn't implemented) */ | |
| #define STATE_CMD_SEQIN 0x00000009 /* sequential data imput */ | |
| #define STATE_CMD_READID 0x0000000A /* read ID */ | |
| #define STATE_CMD_ERASE2 0x0000000B /* sector erase second command */ | |
| #define STATE_CMD_RESET 0x0000000C /* reset */ | |
| #define STATE_CMD_MASK 0x0000000F /* command states mask */ | |
| /* After an addres is input, the simulator goes to one of these states */ | |
| #define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */ | |
| #define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */ | |
| #define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */ | |
| #define STATE_ADDR_MASK 0x00000030 /* address states mask */ | |
| /* Durind data input/output the simulator is in these states */ | |
| #define STATE_DATAIN 0x00000100 /* waiting for data input */ | |
| #define STATE_DATAIN_MASK 0x00000100 /* data input states mask */ | |
| #define STATE_DATAOUT 0x00001000 /* waiting for page data output */ | |
| #define STATE_DATAOUT_ID 0x00002000 /* waiting for ID bytes output */ | |
| #define STATE_DATAOUT_STATUS 0x00003000 /* waiting for status output */ | |
| #define STATE_DATAOUT_STATUS_M 0x00004000 /* waiting for multi-plane status output */ | |
| #define STATE_DATAOUT_MASK 0x00007000 /* data output states mask */ | |
| /* Previous operation is done, ready to accept new requests */ | |
| #define STATE_READY 0x00000000 | |
| /* This state is used to mark that the next state isn't known yet */ | |
| #define STATE_UNKNOWN 0x10000000 | |
| /* Simulator's actions bit masks */ | |
| #define ACTION_CPY 0x00100000 /* copy page/OOB to the internal buffer */ | |
| #define ACTION_PRGPAGE 0x00200000 /* programm the internal buffer to flash */ | |
| #define ACTION_SECERASE 0x00300000 /* erase sector */ | |
| #define ACTION_ZEROOFF 0x00400000 /* don't add any offset to address */ | |
| #define ACTION_HALFOFF 0x00500000 /* add to address half of page */ | |
| #define ACTION_OOBOFF 0x00600000 /* add to address OOB offset */ | |
| #define ACTION_MASK 0x00700000 /* action mask */ | |
| #define NS_OPER_NUM 12 /* Number of operations supported by the simulator */ | |
| #define NS_OPER_STATES 6 /* Maximum number of states in operation */ | |
| #define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */ | |
| #define OPT_PAGE256 0x00000001 /* 256-byte page chips */ | |
| #define OPT_PAGE512 0x00000002 /* 512-byte page chips */ | |
| #define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */ | |
| #define OPT_SMARTMEDIA 0x00000010 /* SmartMedia technology chips */ | |
| #define OPT_AUTOINCR 0x00000020 /* page number auto inctimentation is possible */ | |
| #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */ | |
| #define OPT_LARGEPAGE (OPT_PAGE2048) /* 2048-byte page chips */ | |
| #define OPT_SMALLPAGE (OPT_PAGE256 | OPT_PAGE512) /* 256 and 512-byte page chips */ | |
| /* Remove action bits ftom state */ | |
| #define NS_STATE(x) ((x) & ~ACTION_MASK) | |
| /* | |
| * Maximum previous states which need to be saved. Currently saving is | |
| * only needed for page programm operation with preceeded read command | |
| * (which is only valid for 512-byte pages). | |
| */ | |
| #define NS_MAX_PREVSTATES 1 | |
| /* | |
| * The structure which describes all the internal simulator data. | |
| */ | |
| struct nandsim { | |
| struct mtd_partition part; | |
| uint busw; /* flash chip bus width (8 or 16) */ | |
| u_char ids[4]; /* chip's ID bytes */ | |
| uint32_t options; /* chip's characteristic bits */ | |
| uint32_t state; /* current chip state */ | |
| uint32_t nxstate; /* next expected state */ | |
| uint32_t *op; /* current operation, NULL operations isn't known yet */ | |
| uint32_t pstates[NS_MAX_PREVSTATES]; /* previous states */ | |
| uint16_t npstates; /* number of previous states saved */ | |
| uint16_t stateidx; /* current state index */ | |
| /* The simulated NAND flash image */ | |
| union flash_media { | |
| u_char *byte; | |
| uint16_t *word; | |
| } mem; | |
| /* Internal buffer of page + OOB size bytes */ | |
| union internal_buffer { | |
| u_char *byte; /* for byte access */ | |
| uint16_t *word; /* for 16-bit word access */ | |
| } buf; | |
| /* NAND flash "geometry" */ | |
| struct nandsin_geometry { | |
| uint32_t totsz; /* total flash size, bytes */ | |
| uint32_t secsz; /* flash sector (erase block) size, bytes */ | |
| uint pgsz; /* NAND flash page size, bytes */ | |
| uint oobsz; /* page OOB area size, bytes */ | |
| uint32_t totszoob; /* total flash size including OOB, bytes */ | |
| uint pgszoob; /* page size including OOB , bytes*/ | |
| uint secszoob; /* sector size including OOB, bytes */ | |
| uint pgnum; /* total number of pages */ | |
| uint pgsec; /* number of pages per sector */ | |
| uint secshift; /* bits number in sector size */ | |
| uint pgshift; /* bits number in page size */ | |
| uint oobshift; /* bits number in OOB size */ | |
| uint pgaddrbytes; /* bytes per page address */ | |
| uint secaddrbytes; /* bytes per sector address */ | |
| uint idbytes; /* the number ID bytes that this chip outputs */ | |
| } geom; | |
| /* NAND flash internal registers */ | |
| struct nandsim_regs { | |
| unsigned command; /* the command register */ | |
| u_char status; /* the status register */ | |
| uint row; /* the page number */ | |
| uint column; /* the offset within page */ | |
| uint count; /* internal counter */ | |
| uint num; /* number of bytes which must be processed */ | |
| uint off; /* fixed page offset */ | |
| } regs; | |
| /* NAND flash lines state */ | |
| struct ns_lines_status { | |
| int ce; /* chip Enable */ | |
| int cle; /* command Latch Enable */ | |
| int ale; /* address Latch Enable */ | |
| int wp; /* write Protect */ | |
| } lines; | |
| }; | |
| /* | |
| * Operations array. To perform any operation the simulator must pass | |
| * through the correspondent states chain. | |
| */ | |
| static struct nandsim_operations { | |
| uint32_t reqopts; /* options which are required to perform the operation */ | |
| uint32_t states[NS_OPER_STATES]; /* operation's states */ | |
| } ops[NS_OPER_NUM] = { | |
| /* Read page + OOB from the beginning */ | |
| {OPT_SMALLPAGE, {STATE_CMD_READ0 | ACTION_ZEROOFF, STATE_ADDR_PAGE | ACTION_CPY, | |
| STATE_DATAOUT, STATE_READY}}, | |
| /* Read page + OOB from the second half */ | |
| {OPT_PAGE512_8BIT, {STATE_CMD_READ1 | ACTION_HALFOFF, STATE_ADDR_PAGE | ACTION_CPY, | |
| STATE_DATAOUT, STATE_READY}}, | |
| /* Read OOB */ | |
| {OPT_SMALLPAGE, {STATE_CMD_READOOB | ACTION_OOBOFF, STATE_ADDR_PAGE | ACTION_CPY, | |
| STATE_DATAOUT, STATE_READY}}, | |
| /* Programm page starting from the beginning */ | |
| {OPT_ANY, {STATE_CMD_SEQIN, STATE_ADDR_PAGE, STATE_DATAIN, | |
| STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}}, | |
| /* Programm page starting from the beginning */ | |
| {OPT_SMALLPAGE, {STATE_CMD_READ0, STATE_CMD_SEQIN | ACTION_ZEROOFF, STATE_ADDR_PAGE, | |
| STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}}, | |
| /* Programm page starting from the second half */ | |
| {OPT_PAGE512, {STATE_CMD_READ1, STATE_CMD_SEQIN | ACTION_HALFOFF, STATE_ADDR_PAGE, | |
| STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}}, | |
| /* Programm OOB */ | |
| {OPT_SMALLPAGE, {STATE_CMD_READOOB, STATE_CMD_SEQIN | ACTION_OOBOFF, STATE_ADDR_PAGE, | |
| STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}}, | |
| /* Erase sector */ | |
| {OPT_ANY, {STATE_CMD_ERASE1, STATE_ADDR_SEC, STATE_CMD_ERASE2 | ACTION_SECERASE, STATE_READY}}, | |
| /* Read status */ | |
| {OPT_ANY, {STATE_CMD_STATUS, STATE_DATAOUT_STATUS, STATE_READY}}, | |
| /* Read multi-plane status */ | |
| {OPT_SMARTMEDIA, {STATE_CMD_STATUS_M, STATE_DATAOUT_STATUS_M, STATE_READY}}, | |
| /* Read ID */ | |
| {OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}}, | |
| /* Large page devices read page */ | |
| {OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY, | |
| STATE_DATAOUT, STATE_READY}} | |
| }; | |
| /* MTD structure for NAND controller */ | |
| static struct mtd_info *nsmtd; | |
| static u_char ns_verify_buf[NS_LARGEST_PAGE_SIZE]; | |
| /* | |
| * Initialize the nandsim structure. | |
| * | |
| * RETURNS: 0 if success, -ERRNO if failure. | |
| */ | |
| static int | |
| init_nandsim(struct mtd_info *mtd) | |
| { | |
| struct nand_chip *chip = (struct nand_chip *)mtd->priv; | |
| struct nandsim *ns = (struct nandsim *)(chip->priv); | |
| int i; | |
| if (NS_IS_INITIALIZED(ns)) { | |
| NS_ERR("init_nandsim: nandsim is already initialized\n"); | |
| return -EIO; | |
| } | |
| /* Force mtd to not do delays */ | |
| chip->chip_delay = 0; | |
| /* Initialize the NAND flash parameters */ | |
| ns->busw = chip->options & NAND_BUSWIDTH_16 ? 16 : 8; | |
| ns->geom.totsz = mtd->size; | |
| ns->geom.pgsz = mtd->writesize; | |
| ns->geom.oobsz = mtd->oobsize; | |
| ns->geom.secsz = mtd->erasesize; | |
| ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz; | |
| ns->geom.pgnum = ns->geom.totsz / ns->geom.pgsz; | |
| ns->geom.totszoob = ns->geom.totsz + ns->geom.pgnum * ns->geom.oobsz; | |
| ns->geom.secshift = ffs(ns->geom.secsz) - 1; | |
| ns->geom.pgshift = chip->page_shift; | |
| ns->geom.oobshift = ffs(ns->geom.oobsz) - 1; | |
| ns->geom.pgsec = ns->geom.secsz / ns->geom.pgsz; | |
| ns->geom.secszoob = ns->geom.secsz + ns->geom.oobsz * ns->geom.pgsec; | |
| ns->options = 0; | |
| if (ns->geom.pgsz == 256) { | |
| ns->options |= OPT_PAGE256; | |
| } | |
| else if (ns->geom.pgsz == 512) { | |
| ns->options |= (OPT_PAGE512 | OPT_AUTOINCR); | |
| if (ns->busw == 8) | |
| ns->options |= OPT_PAGE512_8BIT; | |
| } else if (ns->geom.pgsz == 2048) { | |
| ns->options |= OPT_PAGE2048; | |
| } else { | |
| NS_ERR("init_nandsim: unknown page size %u\n", ns->geom.pgsz); | |
| return -EIO; | |
| } | |
| if (ns->options & OPT_SMALLPAGE) { | |
| if (ns->geom.totsz < (64 << 20)) { | |
| ns->geom.pgaddrbytes = 3; | |
| ns->geom.secaddrbytes = 2; | |
| } else { | |
| ns->geom.pgaddrbytes = 4; | |
| ns->geom.secaddrbytes = 3; | |
| } | |
| } else { | |
| if (ns->geom.totsz <= (128 << 20)) { | |
| ns->geom.pgaddrbytes = 5; | |
| ns->geom.secaddrbytes = 2; | |
| } else { | |
| ns->geom.pgaddrbytes = 5; | |
| ns->geom.secaddrbytes = 3; | |
| } | |
| } | |
| /* Detect how many ID bytes the NAND chip outputs */ | |
| for (i = 0; nand_flash_ids[i].name != NULL; i++) { | |
| if (second_id_byte != nand_flash_ids[i].id) | |
| continue; | |
| if (!(nand_flash_ids[i].options & NAND_NO_AUTOINCR)) | |
| ns->options |= OPT_AUTOINCR; | |
| } | |
| if (ns->busw == 16) | |
| NS_WARN("16-bit flashes support wasn't tested\n"); | |
| printk("flash size: %u MiB\n", ns->geom.totsz >> 20); | |
| printk("page size: %u bytes\n", ns->geom.pgsz); | |
| printk("OOB area size: %u bytes\n", ns->geom.oobsz); | |
| printk("sector size: %u KiB\n", ns->geom.secsz >> 10); | |
| printk("pages number: %u\n", ns->geom.pgnum); | |
| printk("pages per sector: %u\n", ns->geom.pgsec); | |
| printk("bus width: %u\n", ns->busw); | |
| printk("bits in sector size: %u\n", ns->geom.secshift); | |
| printk("bits in page size: %u\n", ns->geom.pgshift); | |
| printk("bits in OOB size: %u\n", ns->geom.oobshift); | |
| printk("flash size with OOB: %u KiB\n", ns->geom.totszoob >> 10); | |
| printk("page address bytes: %u\n", ns->geom.pgaddrbytes); | |
| printk("sector address bytes: %u\n", ns->geom.secaddrbytes); | |
| printk("options: %#x\n", ns->options); | |
| /* Map / allocate and initialize the flash image */ | |
| #ifdef CONFIG_NS_ABS_POS | |
| ns->mem.byte = ioremap(CONFIG_NS_ABS_POS, ns->geom.totszoob); | |
| if (!ns->mem.byte) { | |
| NS_ERR("init_nandsim: failed to map the NAND flash image at address %p\n", | |
| (void *)CONFIG_NS_ABS_POS); | |
| return -ENOMEM; | |
| } | |
| #else | |
| ns->mem.byte = vmalloc(ns->geom.totszoob); | |
| if (!ns->mem.byte) { | |
| NS_ERR("init_nandsim: unable to allocate %u bytes for flash image\n", | |
| ns->geom.totszoob); | |
| return -ENOMEM; | |
| } | |
| memset(ns->mem.byte, 0xFF, ns->geom.totszoob); | |
| #endif | |
| /* Allocate / initialize the internal buffer */ | |
| ns->buf.byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL); | |
| if (!ns->buf.byte) { | |
| NS_ERR("init_nandsim: unable to allocate %u bytes for the internal buffer\n", | |
| ns->geom.pgszoob); | |
| goto error; | |
| } | |
| memset(ns->buf.byte, 0xFF, ns->geom.pgszoob); | |
| /* Fill the partition_info structure */ | |
| ns->part.name = "NAND simulator partition"; | |
| ns->part.offset = 0; | |
| ns->part.size = ns->geom.totsz; | |
| return 0; | |
| error: | |
| #ifdef CONFIG_NS_ABS_POS | |
| iounmap(ns->mem.byte); | |
| #else | |
| vfree(ns->mem.byte); | |
| #endif | |
| return -ENOMEM; | |
| } | |
| /* | |
| * Free the nandsim structure. | |
| */ | |
| static void | |
| free_nandsim(struct nandsim *ns) | |
| { | |
| kfree(ns->buf.byte); | |
| #ifdef CONFIG_NS_ABS_POS | |
| iounmap(ns->mem.byte); | |
| #else | |
| vfree(ns->mem.byte); | |
| #endif | |
| return; | |
| } | |
| /* | |
| * Returns the string representation of 'state' state. | |
| */ | |
| static char * | |
| get_state_name(uint32_t state) | |
| { | |
| switch (NS_STATE(state)) { | |
| case STATE_CMD_READ0: | |
| return "STATE_CMD_READ0"; | |
| case STATE_CMD_READ1: | |
| return "STATE_CMD_READ1"; | |
| case STATE_CMD_PAGEPROG: | |
| return "STATE_CMD_PAGEPROG"; | |
| case STATE_CMD_READOOB: | |
| return "STATE_CMD_READOOB"; | |
| case STATE_CMD_READSTART: | |
| return "STATE_CMD_READSTART"; | |
| case STATE_CMD_ERASE1: | |
| return "STATE_CMD_ERASE1"; | |
| case STATE_CMD_STATUS: | |
| return "STATE_CMD_STATUS"; | |
| case STATE_CMD_STATUS_M: | |
| return "STATE_CMD_STATUS_M"; | |
| case STATE_CMD_SEQIN: | |
| return "STATE_CMD_SEQIN"; | |
| case STATE_CMD_READID: | |
| return "STATE_CMD_READID"; | |
| case STATE_CMD_ERASE2: | |
| return "STATE_CMD_ERASE2"; | |
| case STATE_CMD_RESET: | |
| return "STATE_CMD_RESET"; | |
| case STATE_ADDR_PAGE: | |
| return "STATE_ADDR_PAGE"; | |
| case STATE_ADDR_SEC: | |
| return "STATE_ADDR_SEC"; | |
| case STATE_ADDR_ZERO: | |
| return "STATE_ADDR_ZERO"; | |
| case STATE_DATAIN: | |
| return "STATE_DATAIN"; | |
| case STATE_DATAOUT: | |
| return "STATE_DATAOUT"; | |
| case STATE_DATAOUT_ID: | |
| return "STATE_DATAOUT_ID"; | |
| case STATE_DATAOUT_STATUS: | |
| return "STATE_DATAOUT_STATUS"; | |
| case STATE_DATAOUT_STATUS_M: | |
| return "STATE_DATAOUT_STATUS_M"; | |
| case STATE_READY: | |
| return "STATE_READY"; | |
| case STATE_UNKNOWN: | |
| return "STATE_UNKNOWN"; | |
| } | |
| NS_ERR("get_state_name: unknown state, BUG\n"); | |
| return NULL; | |
| } | |
| /* | |
| * Check if command is valid. | |
| * | |
| * RETURNS: 1 if wrong command, 0 if right. | |
| */ | |
| static int | |
| check_command(int cmd) | |
| { | |
| switch (cmd) { | |
| case NAND_CMD_READ0: | |
| case NAND_CMD_READSTART: | |
| case NAND_CMD_PAGEPROG: | |
| case NAND_CMD_READOOB: | |
| case NAND_CMD_ERASE1: | |
| case NAND_CMD_STATUS: | |
| case NAND_CMD_SEQIN: | |
| case NAND_CMD_READID: | |
| case NAND_CMD_ERASE2: | |
| case NAND_CMD_RESET: | |
| case NAND_CMD_READ1: | |
| return 0; | |
| case NAND_CMD_STATUS_MULTI: | |
| default: | |
| return 1; | |
| } | |
| } | |
| /* | |
| * Returns state after command is accepted by command number. | |
| */ | |
| static uint32_t | |
| get_state_by_command(unsigned command) | |
| { | |
| switch (command) { | |
| case NAND_CMD_READ0: | |
| return STATE_CMD_READ0; | |
| case NAND_CMD_READ1: | |
| return STATE_CMD_READ1; | |
| case NAND_CMD_PAGEPROG: | |
| return STATE_CMD_PAGEPROG; | |
| case NAND_CMD_READSTART: | |
| return STATE_CMD_READSTART; | |
| case NAND_CMD_READOOB: | |
| return STATE_CMD_READOOB; | |
| case NAND_CMD_ERASE1: | |
| return STATE_CMD_ERASE1; | |
| case NAND_CMD_STATUS: | |
| return STATE_CMD_STATUS; | |
| case NAND_CMD_STATUS_MULTI: | |
| return STATE_CMD_STATUS_M; | |
| case NAND_CMD_SEQIN: | |
| return STATE_CMD_SEQIN; | |
| case NAND_CMD_READID: | |
| return STATE_CMD_READID; | |
| case NAND_CMD_ERASE2: | |
| return STATE_CMD_ERASE2; | |
| case NAND_CMD_RESET: | |
| return STATE_CMD_RESET; | |
| } | |
| NS_ERR("get_state_by_command: unknown command, BUG\n"); | |
| return 0; | |
| } | |
| /* | |
| * Move an address byte to the correspondent internal register. | |
| */ | |
| static inline void | |
| accept_addr_byte(struct nandsim *ns, u_char bt) | |
| { | |
| uint byte = (uint)bt; | |
| if (ns->regs.count < (ns->geom.pgaddrbytes - ns->geom.secaddrbytes)) | |
| ns->regs.column |= (byte << 8 * ns->regs.count); | |
| else { | |
| ns->regs.row |= (byte << 8 * (ns->regs.count - | |
| ns->geom.pgaddrbytes + | |
| ns->geom.secaddrbytes)); | |
| } | |
| return; | |
| } | |
| /* | |
| * Switch to STATE_READY state. | |
| */ | |
| static inline void | |
| switch_to_ready_state(struct nandsim *ns, u_char status) | |
| { | |
| NS_DBG("switch_to_ready_state: switch to %s state\n", get_state_name(STATE_READY)); | |
| ns->state = STATE_READY; | |
| ns->nxstate = STATE_UNKNOWN; | |
| ns->op = NULL; | |
| ns->npstates = 0; | |
| ns->stateidx = 0; | |
| ns->regs.num = 0; | |
| ns->regs.count = 0; | |
| ns->regs.off = 0; | |
| ns->regs.row = 0; | |
| ns->regs.column = 0; | |
| ns->regs.status = status; | |
| } | |
| /* | |
| * If the operation isn't known yet, try to find it in the global array | |
| * of supported operations. | |
| * | |
| * Operation can be unknown because of the following. | |
| * 1. New command was accepted and this is the firs call to find the | |
| * correspondent states chain. In this case ns->npstates = 0; | |
| * 2. There is several operations which begin with the same command(s) | |
| * (for example program from the second half and read from the | |
| * second half operations both begin with the READ1 command). In this | |
| * case the ns->pstates[] array contains previous states. | |
| * | |
| * Thus, the function tries to find operation containing the following | |
| * states (if the 'flag' parameter is 0): | |
| * ns->pstates[0], ... ns->pstates[ns->npstates], ns->state | |
| * | |
| * If (one and only one) matching operation is found, it is accepted ( | |
| * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is | |
| * zeroed). | |
| * | |
| * If there are several maches, the current state is pushed to the | |
| * ns->pstates. | |
| * | |
| * The operation can be unknown only while commands are input to the chip. | |
| * As soon as address command is accepted, the operation must be known. | |
| * In such situation the function is called with 'flag' != 0, and the | |
| * operation is searched using the following pattern: | |
| * ns->pstates[0], ... ns->pstates[ns->npstates], <address input> | |
| * | |
| * It is supposed that this pattern must either match one operation on | |
| * none. There can't be ambiguity in that case. | |
| * | |
| * If no matches found, the functions does the following: | |
| * 1. if there are saved states present, try to ignore them and search | |
| * again only using the last command. If nothing was found, switch | |
| * to the STATE_READY state. | |
| * 2. if there are no saved states, switch to the STATE_READY state. | |
| * | |
| * RETURNS: -2 - no matched operations found. | |
| * -1 - several matches. | |
| * 0 - operation is found. | |
| */ | |
| static int | |
| find_operation(struct nandsim *ns, uint32_t flag) | |
| { | |
| int opsfound = 0; | |
| int i, j, idx = 0; | |
| for (i = 0; i < NS_OPER_NUM; i++) { | |
| int found = 1; | |
| if (!(ns->options & ops[i].reqopts)) | |
| /* Ignore operations we can't perform */ | |
| continue; | |
| if (flag) { | |
| if (!(ops[i].states[ns->npstates] & STATE_ADDR_MASK)) | |
| continue; | |
| } else { | |
| if (NS_STATE(ns->state) != NS_STATE(ops[i].states[ns->npstates])) | |
| continue; | |
| } | |
| for (j = 0; j < ns->npstates; j++) | |
| if (NS_STATE(ops[i].states[j]) != NS_STATE(ns->pstates[j]) | |
| && (ns->options & ops[idx].reqopts)) { | |
| found = 0; | |
| break; | |
| } | |
| if (found) { | |
| idx = i; | |
| opsfound += 1; | |
| } | |
| } | |
| if (opsfound == 1) { | |
| /* Exact match */ | |
| ns->op = &ops[idx].states[0]; | |
| if (flag) { | |
| /* | |
| * In this case the find_operation function was | |
| * called when address has just began input. But it isn't | |
| * yet fully input and the current state must | |
| * not be one of STATE_ADDR_*, but the STATE_ADDR_* | |
| * state must be the next state (ns->nxstate). | |
| */ | |
| ns->stateidx = ns->npstates - 1; | |
| } else { | |
| ns->stateidx = ns->npstates; | |
| } | |
| ns->npstates = 0; | |
| ns->state = ns->op[ns->stateidx]; | |
| ns->nxstate = ns->op[ns->stateidx + 1]; | |
| NS_DBG("find_operation: operation found, index: %d, state: %s, nxstate %s\n", | |
| idx, get_state_name(ns->state), get_state_name(ns->nxstate)); | |
| return 0; | |
| } | |
| if (opsfound == 0) { | |
| /* Nothing was found. Try to ignore previous commands (if any) and search again */ | |
| if (ns->npstates != 0) { | |
| NS_DBG("find_operation: no operation found, try again with state %s\n", | |
| get_state_name(ns->state)); | |
| ns->npstates = 0; | |
| return find_operation(ns, 0); | |
| } | |
| NS_DBG("find_operation: no operations found\n"); | |
| switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); | |
| return -2; | |
| } | |
| if (flag) { | |
| /* This shouldn't happen */ | |
| NS_DBG("find_operation: BUG, operation must be known if address is input\n"); | |
| return -2; | |
| } | |
| NS_DBG("find_operation: there is still ambiguity\n"); | |
| ns->pstates[ns->npstates++] = ns->state; | |
| return -1; | |
| } | |
| /* | |
| * If state has any action bit, perform this action. | |
| * | |
| * RETURNS: 0 if success, -1 if error. | |
| */ | |
| static int | |
| do_state_action(struct nandsim *ns, uint32_t action) | |
| { | |
| int i, num; | |
| int busdiv = ns->busw == 8 ? 1 : 2; | |
| action &= ACTION_MASK; | |
| /* Check that page address input is correct */ | |
| if (action != ACTION_SECERASE && ns->regs.row >= ns->geom.pgnum) { | |
| NS_WARN("do_state_action: wrong page number (%#x)\n", ns->regs.row); | |
| return -1; | |
| } | |
| switch (action) { | |
| case ACTION_CPY: | |
| /* | |
| * Copy page data to the internal buffer. | |
| */ | |
| /* Column shouldn't be very large */ | |
| if (ns->regs.column >= (ns->geom.pgszoob - ns->regs.off)) { | |
| NS_ERR("do_state_action: column number is too large\n"); | |
| break; | |
| } | |
| num = ns->geom.pgszoob - ns->regs.off - ns->regs.column; | |
| memcpy(ns->buf.byte, ns->mem.byte + NS_RAW_OFFSET(ns) + ns->regs.off, num); | |
| NS_DBG("do_state_action: (ACTION_CPY:) copy %d bytes to int buf, raw offset %d\n", | |
| num, NS_RAW_OFFSET(ns) + ns->regs.off); | |
| if (ns->regs.off == 0) | |
| NS_LOG("read page %d\n", ns->regs.row); | |
| else if (ns->regs.off < ns->geom.pgsz) | |
| NS_LOG("read page %d (second half)\n", ns->regs.row); | |
| else | |
| NS_LOG("read OOB of page %d\n", ns->regs.row); | |
| NS_UDELAY(access_delay); | |
| NS_UDELAY(input_cycle * ns->geom.pgsz / 1000 / busdiv); | |
| break; | |
| case ACTION_SECERASE: | |
| /* | |
| * Erase sector. | |
| */ | |
| if (ns->lines.wp) { | |
| NS_ERR("do_state_action: device is write-protected, ignore sector erase\n"); | |
| return -1; | |
| } | |
| if (ns->regs.row >= ns->geom.pgnum - ns->geom.pgsec | |
| || (ns->regs.row & ~(ns->geom.secsz - 1))) { | |
| NS_ERR("do_state_action: wrong sector address (%#x)\n", ns->regs.row); | |
| return -1; | |
| } | |
| ns->regs.row = (ns->regs.row << | |
| 8 * (ns->geom.pgaddrbytes - ns->geom.secaddrbytes)) | ns->regs.column; | |
| ns->regs.column = 0; | |
| NS_DBG("do_state_action: erase sector at address %#x, off = %d\n", | |
| ns->regs.row, NS_RAW_OFFSET(ns)); | |
| NS_LOG("erase sector %d\n", ns->regs.row >> (ns->geom.secshift - ns->geom.pgshift)); | |
| memset(ns->mem.byte + NS_RAW_OFFSET(ns), 0xFF, ns->geom.secszoob); | |
| NS_MDELAY(erase_delay); | |
| break; | |
| case ACTION_PRGPAGE: | |
| /* | |
| * Programm page - move internal buffer data to the page. | |
| */ | |
| if (ns->lines.wp) { | |
| NS_WARN("do_state_action: device is write-protected, programm\n"); | |
| return -1; | |
| } | |
| num = ns->geom.pgszoob - ns->regs.off - ns->regs.column; | |
| if (num != ns->regs.count) { | |
| NS_ERR("do_state_action: too few bytes were input (%d instead of %d)\n", | |
| ns->regs.count, num); | |
| return -1; | |
| } | |
| for (i = 0; i < num; i++) | |
| ns->mem.byte[NS_RAW_OFFSET(ns) + ns->regs.off + i] &= ns->buf.byte[i]; | |
| NS_DBG("do_state_action: copy %d bytes from int buf to (%#x, %#x), raw off = %d\n", | |
| num, ns->regs.row, ns->regs.column, NS_RAW_OFFSET(ns) + ns->regs.off); | |
| NS_LOG("programm page %d\n", ns->regs.row); | |
| NS_UDELAY(programm_delay); | |
| NS_UDELAY(output_cycle * ns->geom.pgsz / 1000 / busdiv); | |
| break; | |
| case ACTION_ZEROOFF: | |
| NS_DBG("do_state_action: set internal offset to 0\n"); | |
| ns->regs.off = 0; | |
| break; | |
| case ACTION_HALFOFF: | |
| if (!(ns->options & OPT_PAGE512_8BIT)) { | |
| NS_ERR("do_state_action: BUG! can't skip half of page for non-512" | |
| "byte page size 8x chips\n"); | |
| return -1; | |
| } | |
| NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz/2); | |
| ns->regs.off = ns->geom.pgsz/2; | |
| break; | |
| case ACTION_OOBOFF: | |
| NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz); | |
| ns->regs.off = ns->geom.pgsz; | |
| break; | |
| default: | |
| NS_DBG("do_state_action: BUG! unknown action\n"); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Switch simulator's state. | |
| */ | |
| static void | |
| switch_state(struct nandsim *ns) | |
| { | |
| if (ns->op) { | |
| /* | |
| * The current operation have already been identified. | |
| * Just follow the states chain. | |
| */ | |
| ns->stateidx += 1; | |
| ns->state = ns->nxstate; | |
| ns->nxstate = ns->op[ns->stateidx + 1]; | |
| NS_DBG("switch_state: operation is known, switch to the next state, " | |
| "state: %s, nxstate: %s\n", | |
| get_state_name(ns->state), get_state_name(ns->nxstate)); | |
| /* See, whether we need to do some action */ | |
| if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) { | |
| switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); | |
| return; | |
| } | |
| } else { | |
| /* | |
| * We don't yet know which operation we perform. | |
| * Try to identify it. | |
| */ | |
| /* | |
| * The only event causing the switch_state function to | |
| * be called with yet unknown operation is new command. | |
| */ | |
| ns->state = get_state_by_command(ns->regs.command); | |
| NS_DBG("switch_state: operation is unknown, try to find it\n"); | |
| if (find_operation(ns, 0) != 0) | |
| return; | |
| if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) { | |
| switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); | |
| return; | |
| } | |
| } | |
| /* For 16x devices column means the page offset in words */ | |
| if ((ns->nxstate & STATE_ADDR_MASK) && ns->busw == 16) { | |
| NS_DBG("switch_state: double the column number for 16x device\n"); | |
| ns->regs.column <<= 1; | |
| } | |
| if (NS_STATE(ns->nxstate) == STATE_READY) { | |
| /* | |
| * The current state is the last. Return to STATE_READY | |
| */ | |
| u_char status = NS_STATUS_OK(ns); | |
| /* In case of data states, see if all bytes were input/output */ | |
| if ((ns->state & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK)) | |
| && ns->regs.count != ns->regs.num) { | |
| NS_WARN("switch_state: not all bytes were processed, %d left\n", | |
| ns->regs.num - ns->regs.count); | |
| status = NS_STATUS_FAILED(ns); | |
| } | |
| NS_DBG("switch_state: operation complete, switch to STATE_READY state\n"); | |
| switch_to_ready_state(ns, status); | |
| return; | |
| } else if (ns->nxstate & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK)) { | |
| /* | |
| * If the next state is data input/output, switch to it now | |
| */ | |
| ns->state = ns->nxstate; | |
| ns->nxstate = ns->op[++ns->stateidx + 1]; | |
| ns->regs.num = ns->regs.count = 0; | |
| NS_DBG("switch_state: the next state is data I/O, switch, " | |
| "state: %s, nxstate: %s\n", | |
| get_state_name(ns->state), get_state_name(ns->nxstate)); | |
| /* | |
| * Set the internal register to the count of bytes which | |
| * are expected to be input or output | |
| */ | |
| switch (NS_STATE(ns->state)) { | |
| case STATE_DATAIN: | |
| case STATE_DATAOUT: | |
| ns->regs.num = ns->geom.pgszoob - ns->regs.off - ns->regs.column; | |
| break; | |
| case STATE_DATAOUT_ID: | |
| ns->regs.num = ns->geom.idbytes; | |
| break; | |
| case STATE_DATAOUT_STATUS: | |
| case STATE_DATAOUT_STATUS_M: | |
| ns->regs.count = ns->regs.num = 0; | |
| break; | |
| default: | |
| NS_ERR("switch_state: BUG! unknown data state\n"); | |
| } | |
| } else if (ns->nxstate & STATE_ADDR_MASK) { | |
| /* | |
| * If the next state is address input, set the internal | |
| * register to the number of expected address bytes | |
| */ | |
| ns->regs.count = 0; | |
| switch (NS_STATE(ns->nxstate)) { | |
| case STATE_ADDR_PAGE: | |
| ns->regs.num = ns->geom.pgaddrbytes; | |
| break; | |
| case STATE_ADDR_SEC: | |
| ns->regs.num = ns->geom.secaddrbytes; | |
| break; | |
| case STATE_ADDR_ZERO: | |
| ns->regs.num = 1; | |
| break; | |
| default: | |
| NS_ERR("switch_state: BUG! unknown address state\n"); | |
| } | |
| } else { | |
| /* | |
| * Just reset internal counters. | |
| */ | |
| ns->regs.num = 0; | |
| ns->regs.count = 0; | |
| } | |
| } | |
| static u_char | |
| ns_nand_read_byte(struct mtd_info *mtd) | |
| { | |
| struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv; | |
| u_char outb = 0x00; | |
| /* Sanity and correctness checks */ | |
| if (!ns->lines.ce) { | |
| NS_ERR("read_byte: chip is disabled, return %#x\n", (uint)outb); | |
| return outb; | |
| } | |
| if (ns->lines.ale || ns->lines.cle) { | |
| NS_ERR("read_byte: ALE or CLE pin is high, return %#x\n", (uint)outb); | |
| return outb; | |
| } | |
| if (!(ns->state & STATE_DATAOUT_MASK)) { | |
| NS_WARN("read_byte: unexpected data output cycle, state is %s " | |
| "return %#x\n", get_state_name(ns->state), (uint)outb); | |
| return outb; | |
| } | |
| /* Status register may be read as many times as it is wanted */ | |
| if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS) { | |
| NS_DBG("read_byte: return %#x status\n", ns->regs.status); | |
| return ns->regs.status; | |
| } | |
| /* Check if there is any data in the internal buffer which may be read */ | |
| if (ns->regs.count == ns->regs.num) { | |
| NS_WARN("read_byte: no more data to output, return %#x\n", (uint)outb); | |
| return outb; | |
| } | |
| switch (NS_STATE(ns->state)) { | |
| case STATE_DATAOUT: | |
| if (ns->busw == 8) { | |
| outb = ns->buf.byte[ns->regs.count]; | |
| ns->regs.count += 1; | |
| } else { | |
| outb = (u_char)cpu_to_le16(ns->buf.word[ns->regs.count >> 1]); | |
| ns->regs.count += 2; | |
| } | |
| break; | |
| case STATE_DATAOUT_ID: | |
| NS_DBG("read_byte: read ID byte %d, total = %d\n", ns->regs.count, ns->regs.num); | |
| outb = ns->ids[ns->regs.count]; | |
| ns->regs.count += 1; | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| if (ns->regs.count == ns->regs.num) { | |
| NS_DBG("read_byte: all bytes were read\n"); | |
| /* | |
| * The OPT_AUTOINCR allows to read next conseqitive pages without | |
| * new read operation cycle. | |
| */ | |
| if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) { | |
| ns->regs.count = 0; | |
| if (ns->regs.row + 1 < ns->geom.pgnum) | |
| ns->regs.row += 1; | |
| NS_DBG("read_byte: switch to the next page (%#x)\n", ns->regs.row); | |
| do_state_action(ns, ACTION_CPY); | |
| } | |
| else if (NS_STATE(ns->nxstate) == STATE_READY) | |
| switch_state(ns); | |
| } | |
| return outb; | |
| } | |
| static void | |
| ns_nand_write_byte(struct mtd_info *mtd, u_char byte) | |
| { | |
| struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv; | |
| /* Sanity and correctness checks */ | |
| if (!ns->lines.ce) { | |
| NS_ERR("write_byte: chip is disabled, ignore write\n"); | |
| return; | |
| } | |
| if (ns->lines.ale && ns->lines.cle) { | |
| NS_ERR("write_byte: ALE and CLE pins are high simultaneously, ignore write\n"); | |
| return; | |
| } | |
| if (ns->lines.cle == 1) { | |
| /* | |
| * The byte written is a command. | |
| */ | |
| if (byte == NAND_CMD_RESET) { | |
| NS_LOG("reset chip\n"); | |
| switch_to_ready_state(ns, NS_STATUS_OK(ns)); | |
| return; | |
| } | |
| /* | |
| * Chip might still be in STATE_DATAOUT | |
| * (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or | |
| * STATE_DATAOUT_STATUS_M state. If so, switch state. | |
| */ | |
| if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS | |
| || NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M | |
| || ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT)) | |
| switch_state(ns); | |
| /* Check if chip is expecting command */ | |
| if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) { | |
| /* | |
| * We are in situation when something else (not command) | |
| * was expected but command was input. In this case ignore | |
| * previous command(s)/state(s) and accept the last one. | |
| */ | |
| NS_WARN("write_byte: command (%#x) wasn't expected, expected state is %s, " | |
| "ignore previous states\n", (uint)byte, get_state_name(ns->nxstate)); | |
| switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); | |
| } | |
| /* Check that the command byte is correct */ | |
| if (check_command(byte)) { | |
| NS_ERR("write_byte: unknown command %#x\n", (uint)byte); | |
| return; | |
| } | |
| NS_DBG("command byte corresponding to %s state accepted\n", | |
| get_state_name(get_state_by_command(byte))); | |
| ns->regs.command = byte; | |
| switch_state(ns); | |
| } else if (ns->lines.ale == 1) { | |
| /* | |
| * The byte written is an address. | |
| */ | |
| if (NS_STATE(ns->nxstate) == STATE_UNKNOWN) { | |
| NS_DBG("write_byte: operation isn't known yet, identify it\n"); | |
| if (find_operation(ns, 1) < 0) | |
| return; | |
| if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) { | |
| switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); | |
| return; | |
| } | |
| ns->regs.count = 0; | |
| switch (NS_STATE(ns->nxstate)) { | |
| case STATE_ADDR_PAGE: | |
| ns->regs.num = ns->geom.pgaddrbytes; | |
| break; | |
| case STATE_ADDR_SEC: | |
| ns->regs.num = ns->geom.secaddrbytes; | |
| break; | |
| case STATE_ADDR_ZERO: | |
| ns->regs.num = 1; | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| } | |
| /* Check that chip is expecting address */ | |
| if (!(ns->nxstate & STATE_ADDR_MASK)) { | |
| NS_ERR("write_byte: address (%#x) isn't expected, expected state is %s, " | |
| "switch to STATE_READY\n", (uint)byte, get_state_name(ns->nxstate)); | |
| switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); | |
| return; | |
| } | |
| /* Check if this is expected byte */ | |
| if (ns->regs.count == ns->regs.num) { | |
| NS_ERR("write_byte: no more address bytes expected\n"); | |
| switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); | |
| return; | |
| } | |
| accept_addr_byte(ns, byte); | |
| ns->regs.count += 1; | |
| NS_DBG("write_byte: address byte %#x was accepted (%d bytes input, %d expected)\n", | |
| (uint)byte, ns->regs.count, ns->regs.num); | |
| if (ns->regs.count == ns->regs.num) { | |
| NS_DBG("address (%#x, %#x) is accepted\n", ns->regs.row, ns->regs.column); | |
| switch_state(ns); | |
| } | |
| } else { | |
| /* | |
| * The byte written is an input data. | |
| */ | |
| /* Check that chip is expecting data input */ | |
| if (!(ns->state & STATE_DATAIN_MASK)) { | |
| NS_ERR("write_byte: data input (%#x) isn't expected, state is %s, " | |
| "switch to %s\n", (uint)byte, | |
| get_state_name(ns->state), get_state_name(STATE_READY)); | |
| switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); | |
| return; | |
| } | |
| /* Check if this is expected byte */ | |
| if (ns->regs.count == ns->regs.num) { | |
| NS_WARN("write_byte: %u input bytes has already been accepted, ignore write\n", | |
| ns->regs.num); | |
| return; | |
| } | |
| if (ns->busw == 8) { | |
| ns->buf.byte[ns->regs.count] = byte; | |
| ns->regs.count += 1; | |
| } else { | |
| ns->buf.word[ns->regs.count >> 1] = cpu_to_le16((uint16_t)byte); | |
| ns->regs.count += 2; | |
| } | |
| } | |
| return; | |
| } | |
| static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask) | |
| { | |
| struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; | |
| ns->lines.cle = bitmask & NAND_CLE ? 1 : 0; | |
| ns->lines.ale = bitmask & NAND_ALE ? 1 : 0; | |
| ns->lines.ce = bitmask & NAND_NCE ? 1 : 0; | |
| if (cmd != NAND_CMD_NONE) | |
| ns_nand_write_byte(mtd, cmd); | |
| } | |
| static int | |
| ns_device_ready(struct mtd_info *mtd) | |
| { | |
| NS_DBG("device_ready\n"); | |
| return 1; | |
| } | |
| static uint16_t | |
| ns_nand_read_word(struct mtd_info *mtd) | |
| { | |
| struct nand_chip *chip = (struct nand_chip *)mtd->priv; | |
| NS_DBG("read_word\n"); | |
| return chip->read_byte(mtd) | (chip->read_byte(mtd) << 8); | |
| } | |
| static void | |
| ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) | |
| { | |
| struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv; | |
| /* Check that chip is expecting data input */ | |
| if (!(ns->state & STATE_DATAIN_MASK)) { | |
| NS_ERR("write_buf: data input isn't expected, state is %s, " | |
| "switch to STATE_READY\n", get_state_name(ns->state)); | |
| switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); | |
| return; | |
| } | |
| /* Check if these are expected bytes */ | |
| if (ns->regs.count + len > ns->regs.num) { | |
| NS_ERR("write_buf: too many input bytes\n"); | |
| switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); | |
| return; | |
| } | |
| memcpy(ns->buf.byte + ns->regs.count, buf, len); | |
| ns->regs.count += len; | |
| if (ns->regs.count == ns->regs.num) { | |
| NS_DBG("write_buf: %d bytes were written\n", ns->regs.count); | |
| } | |
| } | |
| static void | |
| ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) | |
| { | |
| struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv; | |
| /* Sanity and correctness checks */ | |
| if (!ns->lines.ce) { | |
| NS_ERR("read_buf: chip is disabled\n"); | |
| return; | |
| } | |
| if (ns->lines.ale || ns->lines.cle) { | |
| NS_ERR("read_buf: ALE or CLE pin is high\n"); | |
| return; | |
| } | |
| if (!(ns->state & STATE_DATAOUT_MASK)) { | |
| NS_WARN("read_buf: unexpected data output cycle, current state is %s\n", | |
| get_state_name(ns->state)); | |
| return; | |
| } | |
| if (NS_STATE(ns->state) != STATE_DATAOUT) { | |
| int i; | |
| for (i = 0; i < len; i++) | |
| buf[i] = ((struct nand_chip *)mtd->priv)->read_byte(mtd); | |
| return; | |
| } | |
| /* Check if these are expected bytes */ | |
| if (ns->regs.count + len > ns->regs.num) { | |
| NS_ERR("read_buf: too many bytes to read\n"); | |
| switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); | |
| return; | |
| } | |
| memcpy(buf, ns->buf.byte + ns->regs.count, len); | |
| ns->regs.count += len; | |
| if (ns->regs.count == ns->regs.num) { | |
| if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) { | |
| ns->regs.count = 0; | |
| if (ns->regs.row + 1 < ns->geom.pgnum) | |
| ns->regs.row += 1; | |
| NS_DBG("read_buf: switch to the next page (%#x)\n", ns->regs.row); | |
| do_state_action(ns, ACTION_CPY); | |
| } | |
| else if (NS_STATE(ns->nxstate) == STATE_READY) | |
| switch_state(ns); | |
| } | |
| return; | |
| } | |
| static int | |
| ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) | |
| { | |
| ns_nand_read_buf(mtd, (u_char *)&ns_verify_buf[0], len); | |
| if (!memcmp(buf, &ns_verify_buf[0], len)) { | |
| NS_DBG("verify_buf: the buffer is OK\n"); | |
| return 0; | |
| } else { | |
| NS_DBG("verify_buf: the buffer is wrong\n"); | |
| return -EFAULT; | |
| } | |
| } | |
| /* | |
| * Module initialization function | |
| */ | |
| static int __init ns_init_module(void) | |
| { | |
| struct nand_chip *chip; | |
| struct nandsim *nand; | |
| int retval = -ENOMEM; | |
| if (bus_width != 8 && bus_width != 16) { | |
| NS_ERR("wrong bus width (%d), use only 8 or 16\n", bus_width); | |
| return -EINVAL; | |
| } | |
| /* Allocate and initialize mtd_info, nand_chip and nandsim structures */ | |
| nsmtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip) | |
| + sizeof(struct nandsim), GFP_KERNEL); | |
| if (!nsmtd) { | |
| NS_ERR("unable to allocate core structures.\n"); | |
| return -ENOMEM; | |
| } | |
| memset(nsmtd, 0, sizeof(struct mtd_info) + sizeof(struct nand_chip) + | |
| sizeof(struct nandsim)); | |
| chip = (struct nand_chip *)(nsmtd + 1); | |
| nsmtd->priv = (void *)chip; | |
| nand = (struct nandsim *)(chip + 1); | |
| chip->priv = (void *)nand; | |
| /* | |
| * Register simulator's callbacks. | |
| */ | |
| chip->cmd_ctrl = ns_hwcontrol; | |
| chip->read_byte = ns_nand_read_byte; | |
| chip->dev_ready = ns_device_ready; | |
| chip->write_buf = ns_nand_write_buf; | |
| chip->read_buf = ns_nand_read_buf; | |
| chip->verify_buf = ns_nand_verify_buf; | |
| chip->read_word = ns_nand_read_word; | |
| chip->ecc.mode = NAND_ECC_SOFT; | |
| chip->options |= NAND_SKIP_BBTSCAN; | |
| /* | |
| * Perform minimum nandsim structure initialization to handle | |
| * the initial ID read command correctly | |
| */ | |
| if (third_id_byte != 0xFF || fourth_id_byte != 0xFF) | |
| nand->geom.idbytes = 4; | |
| else | |
| nand->geom.idbytes = 2; | |
| nand->regs.status = NS_STATUS_OK(nand); | |
| nand->nxstate = STATE_UNKNOWN; | |
| nand->options |= OPT_PAGE256; /* temporary value */ | |
| nand->ids[0] = first_id_byte; | |
| nand->ids[1] = second_id_byte; | |
| nand->ids[2] = third_id_byte; | |
| nand->ids[3] = fourth_id_byte; | |
| if (bus_width == 16) { | |
| nand->busw = 16; | |
| chip->options |= NAND_BUSWIDTH_16; | |
| } | |
| nsmtd->owner = THIS_MODULE; | |
| if ((retval = nand_scan(nsmtd, 1)) != 0) { | |
| NS_ERR("can't register NAND Simulator\n"); | |
| if (retval > 0) | |
| retval = -ENXIO; | |
| goto error; | |
| } | |
| if ((retval = init_nandsim(nsmtd)) != 0) { | |
| NS_ERR("scan_bbt: can't initialize the nandsim structure\n"); | |
| goto error; | |
| } | |
| if ((retval = nand_default_bbt(nsmtd)) != 0) { | |
| free_nandsim(nand); | |
| goto error; | |
| } | |
| /* Register NAND as one big partition */ | |
| add_mtd_partitions(nsmtd, &nand->part, 1); | |
| return 0; | |
| error: | |
| kfree(nsmtd); | |
| return retval; | |
| } | |
| module_init(ns_init_module); | |
| /* | |
| * Module clean-up function | |
| */ | |
| static void __exit ns_cleanup_module(void) | |
| { | |
| struct nandsim *ns = (struct nandsim *)(((struct nand_chip *)nsmtd->priv)->priv); | |
| free_nandsim(ns); /* Free nandsim private resources */ | |
| nand_release(nsmtd); /* Unregisterd drived */ | |
| kfree(nsmtd); /* Free other structures */ | |
| } | |
| module_exit(ns_cleanup_module); | |
| MODULE_LICENSE ("GPL"); | |
| MODULE_AUTHOR ("Artem B. Bityuckiy"); | |
| MODULE_DESCRIPTION ("The NAND flash simulator"); | |