| /* | |
| * drivers/mtd/nand/spia.c | |
| * | |
| * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) | |
| * | |
| * | |
| * 10-29-2001 TG change to support hardwarespecific access | |
| * to controllines (due to change in nand.c) | |
| * page_cache added | |
| * | |
| * $Id: spia.c,v 1.25 2005/11/07 11:14:31 gleixner Exp $ | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * Overview: | |
| * This is a device driver for the NAND flash device found on the | |
| * SPIA board which utilizes the Toshiba TC58V64AFT part. This is | |
| * a 64Mibit (8MiB x 8 bits) NAND flash device. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <linux/mtd/nand.h> | |
| #include <linux/mtd/partitions.h> | |
| #include <asm/io.h> | |
| /* | |
| * MTD structure for SPIA board | |
| */ | |
| static struct mtd_info *spia_mtd = NULL; | |
| /* | |
| * Values specific to the SPIA board (used with EP7212 processor) | |
| */ | |
| #define SPIA_IO_BASE 0xd0000000 /* Start of EP7212 IO address space */ | |
| #define SPIA_FIO_BASE 0xf0000000 /* Address where flash is mapped */ | |
| #define SPIA_PEDR 0x0080 /* | |
| * IO offset to Port E data register | |
| * where the CLE, ALE and NCE pins | |
| * are wired to. | |
| */ | |
| #define SPIA_PEDDR 0x00c0 /* | |
| * IO offset to Port E data direction | |
| * register so we can control the IO | |
| * lines. | |
| */ | |
| /* | |
| * Module stuff | |
| */ | |
| static int spia_io_base = SPIA_IO_BASE; | |
| static int spia_fio_base = SPIA_FIO_BASE; | |
| static int spia_pedr = SPIA_PEDR; | |
| static int spia_peddr = SPIA_PEDDR; | |
| module_param(spia_io_base, int, 0); | |
| module_param(spia_fio_base, int, 0); | |
| module_param(spia_pedr, int, 0); | |
| module_param(spia_peddr, int, 0); | |
| /* | |
| * Define partitions for flash device | |
| */ | |
| static const struct mtd_partition partition_info[] = { | |
| { | |
| .name = "SPIA flash partition 1", | |
| .offset = 0, | |
| .size = 2 * 1024 * 1024}, | |
| { | |
| .name = "SPIA flash partition 2", | |
| .offset = 2 * 1024 * 1024, | |
| .size = 6 * 1024 * 1024} | |
| }; | |
| #define NUM_PARTITIONS 2 | |
| /* | |
| * hardware specific access to control-lines | |
| * | |
| * ctrl: | |
| * NAND_CNE: bit 0 -> bit 2 | |
| * NAND_CLE: bit 1 -> bit 0 | |
| * NAND_ALE: bit 2 -> bit 1 | |
| */ | |
| static void spia_hwcontrol(struct mtd_info *mtd, int cmd) | |
| { | |
| struct nand_chip *chip = mtd->priv; | |
| if (ctrl & NAND_CTRL_CHANGE) { | |
| void __iomem *addr = spia_io_base + spia_pedr; | |
| unsigned char bits; | |
| bits = (ctrl & NAND_CNE) << 2; | |
| bits |= (ctrl & NAND_CLE | NAND_ALE) >> 1; | |
| writeb((readb(addr) & ~0x7) | bits, addr); | |
| } | |
| if (cmd != NAND_CMD_NONE) | |
| writeb(cmd, chip->IO_ADDR_W); | |
| } | |
| /* | |
| * Main initialization routine | |
| */ | |
| static int __init spia_init(void) | |
| { | |
| struct nand_chip *this; | |
| /* Allocate memory for MTD device structure and private data */ | |
| spia_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); | |
| if (!spia_mtd) { | |
| printk("Unable to allocate SPIA NAND MTD device structure.\n"); | |
| return -ENOMEM; | |
| } | |
| /* Get pointer to private data */ | |
| this = (struct nand_chip *)(&spia_mtd[1]); | |
| /* Initialize structures */ | |
| memset(spia_mtd, 0, sizeof(struct mtd_info)); | |
| memset(this, 0, sizeof(struct nand_chip)); | |
| /* Link the private data with the MTD structure */ | |
| spia_mtd->priv = this; | |
| spia_mtd->owner = THIS_MODULE; | |
| /* | |
| * Set GPIO Port E control register so that the pins are configured | |
| * to be outputs for controlling the NAND flash. | |
| */ | |
| (*(volatile unsigned char *)(spia_io_base + spia_peddr)) = 0x07; | |
| /* Set address of NAND IO lines */ | |
| this->IO_ADDR_R = (void __iomem *)spia_fio_base; | |
| this->IO_ADDR_W = (void __iomem *)spia_fio_base; | |
| /* Set address of hardware control function */ | |
| this->cmd_ctrl = spia_hwcontrol; | |
| /* 15 us command delay time */ | |
| this->chip_delay = 15; | |
| /* Scan to find existence of the device */ | |
| if (nand_scan(spia_mtd, 1)) { | |
| kfree(spia_mtd); | |
| return -ENXIO; | |
| } | |
| /* Register the partitions */ | |
| add_mtd_partitions(spia_mtd, partition_info, NUM_PARTITIONS); | |
| /* Return happy */ | |
| return 0; | |
| } | |
| module_init(spia_init); | |
| /* | |
| * Clean up routine | |
| */ | |
| static void __exit spia_cleanup(void) | |
| { | |
| /* Release resources, unregister device */ | |
| nand_release(spia_mtd); | |
| /* Free the MTD device structure */ | |
| kfree(spia_mtd); | |
| } | |
| module_exit(spia_cleanup); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com"); | |
| MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on SPIA board"); |