| /* | |
| * linux/drivers/net/ehea/ehea_ethtool.c | |
| * | |
| * eHEA ethernet device driver for IBM eServer System p | |
| * | |
| * (C) Copyright IBM Corp. 2006 | |
| * | |
| * Authors: | |
| * Christoph Raisch <raisch@de.ibm.com> | |
| * Jan-Bernd Themann <themann@de.ibm.com> | |
| * Thomas Klein <tklein@de.ibm.com> | |
| * | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include "ehea.h" | |
| #include "ehea_phyp.h" | |
| static int ehea_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) | |
| { | |
| struct ehea_port *port = netdev_priv(dev); | |
| int ret; | |
| ret = ehea_sense_port_attr(port); | |
| if (ret) | |
| return ret; | |
| if (netif_carrier_ok(dev)) { | |
| switch(port->port_speed) { | |
| case EHEA_SPEED_10M: cmd->speed = SPEED_10; break; | |
| case EHEA_SPEED_100M: cmd->speed = SPEED_100; break; | |
| case EHEA_SPEED_1G: cmd->speed = SPEED_1000; break; | |
| case EHEA_SPEED_10G: cmd->speed = SPEED_10000; break; | |
| } | |
| cmd->duplex = port->full_duplex == 1 ? | |
| DUPLEX_FULL : DUPLEX_HALF; | |
| } else { | |
| cmd->speed = -1; | |
| cmd->duplex = -1; | |
| } | |
| cmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full | |
| | SUPPORTED_100baseT_Full | SUPPORTED_100baseT_Half | |
| | SUPPORTED_10baseT_Full | SUPPORTED_10baseT_Half | |
| | SUPPORTED_Autoneg | SUPPORTED_FIBRE); | |
| cmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_Autoneg | |
| | ADVERTISED_FIBRE); | |
| cmd->port = PORT_FIBRE; | |
| cmd->autoneg = port->autoneg == 1 ? AUTONEG_ENABLE : AUTONEG_DISABLE; | |
| return 0; | |
| } | |
| static int ehea_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | |
| { | |
| struct ehea_port *port = netdev_priv(dev); | |
| int ret = 0; | |
| u32 sp; | |
| if (cmd->autoneg == AUTONEG_ENABLE) { | |
| sp = EHEA_SPEED_AUTONEG; | |
| goto doit; | |
| } | |
| switch(cmd->speed) { | |
| case SPEED_10: | |
| if (cmd->duplex == DUPLEX_FULL) | |
| sp = H_SPEED_10M_F; | |
| else | |
| sp = H_SPEED_10M_H; | |
| break; | |
| case SPEED_100: | |
| if (cmd->duplex == DUPLEX_FULL) | |
| sp = H_SPEED_100M_F; | |
| else | |
| sp = H_SPEED_100M_H; | |
| break; | |
| case SPEED_1000: | |
| if (cmd->duplex == DUPLEX_FULL) | |
| sp = H_SPEED_1G_F; | |
| else | |
| ret = -EINVAL; | |
| break; | |
| case SPEED_10000: | |
| if (cmd->duplex == DUPLEX_FULL) | |
| sp = H_SPEED_10G_F; | |
| else | |
| ret = -EINVAL; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (ret) | |
| goto out; | |
| doit: | |
| ret = ehea_set_portspeed(port, sp); | |
| if (!ret) | |
| ehea_info("%s: Port speed succesfully set: %dMbps " | |
| "%s Duplex", | |
| port->netdev->name, port->port_speed, | |
| port->full_duplex == 1 ? "Full" : "Half"); | |
| out: | |
| return ret; | |
| } | |
| static int ehea_nway_reset(struct net_device *dev) | |
| { | |
| struct ehea_port *port = netdev_priv(dev); | |
| int ret; | |
| ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG); | |
| if (!ret) | |
| ehea_info("%s: Port speed succesfully set: %dMbps " | |
| "%s Duplex", | |
| port->netdev->name, port->port_speed, | |
| port->full_duplex == 1 ? "Full" : "Half"); | |
| return ret; | |
| } | |
| static void ehea_get_drvinfo(struct net_device *dev, | |
| struct ethtool_drvinfo *info) | |
| { | |
| strlcpy(info->driver, DRV_NAME, sizeof(info->driver) - 1); | |
| strlcpy(info->version, DRV_VERSION, sizeof(info->version) - 1); | |
| } | |
| static u32 ehea_get_msglevel(struct net_device *dev) | |
| { | |
| struct ehea_port *port = netdev_priv(dev); | |
| return port->msg_enable; | |
| } | |
| static void ehea_set_msglevel(struct net_device *dev, u32 value) | |
| { | |
| struct ehea_port *port = netdev_priv(dev); | |
| port->msg_enable = value; | |
| } | |
| static u32 ehea_get_rx_csum(struct net_device *dev) | |
| { | |
| return 1; | |
| } | |
| static char ehea_ethtool_stats_keys[][ETH_GSTRING_LEN] = { | |
| {"poll_max_processed"}, | |
| {"queue_stopped"}, | |
| {"min_swqe_avail"}, | |
| {"poll_receive_err"}, | |
| {"pkt_send"}, | |
| {"pkt_xmit"}, | |
| {"send_tasklet"}, | |
| {"ehea_poll"}, | |
| {"nwqe"}, | |
| {"swqe_available_0"}, | |
| {"sig_comp_iv"}, | |
| {"swqe_refill_th"}, | |
| {"port resets"}, | |
| {"rxo"}, | |
| {"rx64"}, | |
| {"rx65"}, | |
| {"rx128"}, | |
| {"rx256"}, | |
| {"rx512"}, | |
| {"rx1024"}, | |
| {"txo"}, | |
| {"tx64"}, | |
| {"tx65"}, | |
| {"tx128"}, | |
| {"tx256"}, | |
| {"tx512"}, | |
| {"tx1024"}, | |
| }; | |
| static void ehea_get_strings(struct net_device *dev, u32 stringset, u8 *data) | |
| { | |
| if (stringset == ETH_SS_STATS) { | |
| memcpy(data, &ehea_ethtool_stats_keys, | |
| sizeof(ehea_ethtool_stats_keys)); | |
| } | |
| } | |
| static int ehea_get_stats_count(struct net_device *dev) | |
| { | |
| return ARRAY_SIZE(ehea_ethtool_stats_keys); | |
| } | |
| static void ehea_get_ethtool_stats(struct net_device *dev, | |
| struct ethtool_stats *stats, u64 *data) | |
| { | |
| u64 hret; | |
| int i; | |
| struct ehea_port *port = netdev_priv(dev); | |
| struct ehea_adapter *adapter = port->adapter; | |
| struct ehea_port_res *pr = &port->port_res[0]; | |
| struct port_state *p_state = &pr->p_state; | |
| struct hcp_ehea_port_cb6 *cb6; | |
| for (i = 0; i < ehea_get_stats_count(dev); i++) | |
| data[i] = 0; | |
| i = 0; | |
| data[i++] = p_state->poll_max_processed; | |
| data[i++] = p_state->queue_stopped; | |
| data[i++] = p_state->min_swqe_avail; | |
| data[i++] = p_state->poll_receive_errors; | |
| data[i++] = p_state->pkt_send; | |
| data[i++] = p_state->pkt_xmit; | |
| data[i++] = p_state->send_tasklet; | |
| data[i++] = p_state->ehea_poll; | |
| data[i++] = p_state->nwqe; | |
| data[i++] = atomic_read(&port->port_res[0].swqe_avail); | |
| data[i++] = port->sig_comp_iv; | |
| data[i++] = port->port_res[0].swqe_refill_th; | |
| data[i++] = port->resets; | |
| cb6 = kzalloc(PAGE_SIZE, GFP_KERNEL); | |
| if (!cb6) { | |
| ehea_error("no mem for cb6"); | |
| return; | |
| } | |
| hret = ehea_h_query_ehea_port(adapter->handle, port->logical_port_id, | |
| H_PORT_CB6, H_PORT_CB6_ALL, cb6); | |
| if (netif_msg_hw(port)) | |
| ehea_dump(cb6, sizeof(*cb6), "ehea_get_ethtool_stats"); | |
| if (hret == H_SUCCESS) { | |
| data[i++] = cb6->rxo; | |
| data[i++] = cb6->rx64; | |
| data[i++] = cb6->rx65; | |
| data[i++] = cb6->rx128; | |
| data[i++] = cb6->rx256; | |
| data[i++] = cb6->rx512; | |
| data[i++] = cb6->rx1024; | |
| data[i++] = cb6->txo; | |
| data[i++] = cb6->tx64; | |
| data[i++] = cb6->tx65; | |
| data[i++] = cb6->tx128; | |
| data[i++] = cb6->tx256; | |
| data[i++] = cb6->tx512; | |
| data[i++] = cb6->tx1024; | |
| } else | |
| ehea_error("query_ehea_port failed"); | |
| kfree(cb6); | |
| } | |
| const struct ethtool_ops ehea_ethtool_ops = { | |
| .get_settings = ehea_get_settings, | |
| .get_drvinfo = ehea_get_drvinfo, | |
| .get_msglevel = ehea_get_msglevel, | |
| .set_msglevel = ehea_set_msglevel, | |
| .get_link = ethtool_op_get_link, | |
| .get_tx_csum = ethtool_op_get_tx_csum, | |
| .get_sg = ethtool_op_get_sg, | |
| .get_tso = ethtool_op_get_tso, | |
| .set_tso = ethtool_op_set_tso, | |
| .get_strings = ehea_get_strings, | |
| .get_stats_count = ehea_get_stats_count, | |
| .get_ethtool_stats = ehea_get_ethtool_stats, | |
| .get_rx_csum = ehea_get_rx_csum, | |
| .set_settings = ehea_set_settings, | |
| .nway_reset = ehea_nway_reset, /* Restart autonegotiation */ | |
| }; | |
| void ehea_set_ethtool_ops(struct net_device *netdev) | |
| { | |
| SET_ETHTOOL_OPS(netdev, &ehea_ethtool_ops); | |
| } |