| /* | |
| * drivers/net/phy/marvell.c | |
| * | |
| * Driver for Marvell PHYs | |
| * | |
| * Author: Andy Fleming | |
| * | |
| * Copyright (c) 2004 Freescale Semiconductor, Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/string.h> | |
| #include <linux/errno.h> | |
| #include <linux/unistd.h> | |
| #include <linux/slab.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/init.h> | |
| #include <linux/delay.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/mm.h> | |
| #include <linux/module.h> | |
| #include <linux/mii.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/phy.h> | |
| #include <asm/io.h> | |
| #include <asm/irq.h> | |
| #include <asm/uaccess.h> | |
| #define MII_M1011_IEVENT 0x13 | |
| #define MII_M1011_IEVENT_CLEAR 0x0000 | |
| #define MII_M1011_IMASK 0x12 | |
| #define MII_M1011_IMASK_INIT 0x6400 | |
| #define MII_M1011_IMASK_CLEAR 0x0000 | |
| MODULE_DESCRIPTION("Marvell PHY driver"); | |
| MODULE_AUTHOR("Andy Fleming"); | |
| MODULE_LICENSE("GPL"); | |
| static int marvell_ack_interrupt(struct phy_device *phydev) | |
| { | |
| int err; | |
| /* Clear the interrupts by reading the reg */ | |
| err = phy_read(phydev, MII_M1011_IEVENT); | |
| if (err < 0) | |
| return err; | |
| return 0; | |
| } | |
| static int marvell_config_intr(struct phy_device *phydev) | |
| { | |
| int err; | |
| if(phydev->interrupts == PHY_INTERRUPT_ENABLED) | |
| err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT); | |
| else | |
| err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); | |
| return err; | |
| } | |
| static int marvell_config_aneg(struct phy_device *phydev) | |
| { | |
| int err; | |
| /* The Marvell PHY has an errata which requires | |
| * that certain registers get written in order | |
| * to restart autonegotiation */ | |
| err = phy_write(phydev, MII_BMCR, BMCR_RESET); | |
| if (err < 0) | |
| return err; | |
| err = phy_write(phydev, 0x1d, 0x1f); | |
| if (err < 0) | |
| return err; | |
| err = phy_write(phydev, 0x1e, 0x200c); | |
| if (err < 0) | |
| return err; | |
| err = phy_write(phydev, 0x1d, 0x5); | |
| if (err < 0) | |
| return err; | |
| err = phy_write(phydev, 0x1e, 0); | |
| if (err < 0) | |
| return err; | |
| err = phy_write(phydev, 0x1e, 0x100); | |
| if (err < 0) | |
| return err; | |
| err = genphy_config_aneg(phydev); | |
| return err; | |
| } | |
| static struct phy_driver m88e1101_driver = { | |
| .phy_id = 0x01410c00, | |
| .phy_id_mask = 0xffffff00, | |
| .name = "Marvell 88E1101", | |
| .features = PHY_GBIT_FEATURES, | |
| .flags = PHY_HAS_INTERRUPT, | |
| .config_aneg = &marvell_config_aneg, | |
| .read_status = &genphy_read_status, | |
| .ack_interrupt = &marvell_ack_interrupt, | |
| .config_intr = &marvell_config_intr, | |
| .driver = { .owner = THIS_MODULE,}, | |
| }; | |
| static int __init marvell_init(void) | |
| { | |
| return phy_driver_register(&m88e1101_driver); | |
| } | |
| static void __exit marvell_exit(void) | |
| { | |
| phy_driver_unregister(&m88e1101_driver); | |
| } | |
| module_init(marvell_init); | |
| module_exit(marvell_exit); |